MPUIO banks have their own dedicated IRQ chip interface, separate from
the "normal" GPIO banks.   Convert the MPUIO IRQ chip over to using
the new generic IRQ chip interface.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Cleanup GPIO IRQ enable/disable handling by removing SoC-specific

Also split enable/disable IRQ into separate functions for better
readability and also facilitate potentially moving to generic irq_chip
in the future.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Cleanup IRQ status handling by passing IRQ status register offsets
via platform data.

Cleans up clearing of GPIO IRQ status and GPIO ISR handler.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Add register offset fields to GPIO platform_data for registers.

This patch adds registers that control direction, input and output
data.  Using these register offsets in the common driver allows
removal of #ifdefs and greatly improves readability.

Also create dedicated data out functions: one for banks with dedicated
set/clear registers, and another for banks with a single mask
register.
Signed-off-by: Kevin Hilman <khilman@ti.com>

use chip info to get the pointer to the struct gpio_bank for a
given GPIO bank and remove get_gpio_bank().
Signed-off-by: Charulatha V <charu@ti.com>

The get_gpio_index() function, littered with cpu_is_* checks can be easily
replaced by using bitops based on the GPIO bank width.  Do so.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Replace hard-coded mask values with bank->width which is already coming
from platform_data.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Rather than having a file-global bank_width variable, move it into
struct gpio_bank so it can be bank-specific.   Note the bank width
is already passed per-bank via platform_data, so current code would
be incorrect if any banks had different width.
Signed-off-by: Kevin Hilman <khilman@ti.com>

Remove the OMAP1 #ifdef and MPUIO special case for _clear_gpio_irqbank()

The MPUIOs do not need a register access to ack/clear the IRQ status,
since reading the IRQ status clears it.  In addition, the MPUIO
irq_chip has an empty ack method, so _clear_gpio_irqbank() is never
used for MPUIOs.
Signed-off-by: Kevin Hilman <khilman@ti.com>

In commit 78a1a6d3 (ARM: OMAP4: Update
the GPIO support) braces were mistakenly added to included the
register read-back inside the cpu_is_* checking.

Remove the braces, ensuring that a register read-back is done, even
when the IRQSTATUS2 register is not written.

Note that the register read-back might be IRQSTATUS1 or IRQSTATUS2
depending on the CPU, but a read-back of any register in that region
will cause a flush of the posted writes.
Signed-off-by: Kevin Hilman <khilman@ti.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  SLAB: Record actual last user of freed objects.
  slub: always align cpu_slab to honor cmpxchg_double requirement

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: unwind canceled flock state
  ceph: fix ENOENT logic in striped_read
  ceph: fix short sync reads from the OSD
  ceph: fix sync vs canceled write
  ceph: use ihold when we already have an inode ref

Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rtc: Staticize non-exported __rtc_set_alarm()
  rtc: Fix ioctl error path return
  ptp: Fix some locking bugs in ptp_read()
  ptp: Return -EFAULT on copy_to_user() errors

Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: Revert 8ab2b7ef ftrace: Remove unnecessary disabling of irqs
  kprobes/trace: Fix kprobe selftest for gcc 4.6
  ftrace: Fix possible undefined return code
  oprofile, dcookies: Fix possible circular locking dependency
  oprofile: Fix locking dependency in sync_start()
  oprofile: Free potentially owned tasks in case of errors
  oprofile, x86: Add comments to IBS LVT offset initialization

Merge branches 'x86-urgent-for-linus' and 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: devicetree: Add missing early_init_dt_setup_initrd_arch stub
  x86: cpu-hotplug: Prevent softirq wakeup on wrong CPU

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Prevent potential NULL dereference in irq_set_irq_wake()

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-pl022: Add missing return value update

Merge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C2410: remove the now empty mach-s3c2410/irq.c
  ARM: S3C24XX: Move s3c24xx_irq_syscore_ops to plat-s3c24xx/irq.c
  ARM: S3C24xx: Fix missing struct for s3c2410_dma_chan
  ARM: SAMSUNG: Remove unused onenand plat functions
  ARM: EXYNOS4: Remove compiler warning on exynos4_pwm4_resume
  ARM: S5P: Fix compilation error for exynos4_defconfig
  ARM: S5P: Should be S3C_VA_USB_HSPHY instead of S5P_VA_XX
  ARM: S5P64X0: Fix SPI platform device name
  ARM: S5PV210: Fix possible null pointer dereference

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix problem in setting checkpoint interval
  nilfs2: fix missing block address termination in btree node shrinking
  nilfs2: fix incorrect block address termination in node concatenation

Return error on out of range cpsdvsr value.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: use join_transaction in btrfs_evict_inode()
  Btrfs - use %pU to print fsid
  Btrfs: fix extent state leak on failed nodatasum reads
  btrfs: fix unlocked access of delalloc_inodes
  Btrfs: avoid stack bloat in btrfs_ioctl_fs_info()
  btrfs: remove 64bit alignment padding to allow extent_buffer to fit into one fewer cacheline
  Btrfs: clear current->journal_info on async transaction commit
  Btrfs: make sure to recheck for bitmaps in clusters
  btrfs: remove unneeded includes from scrub.c
  btrfs: reinitialize scrub workers
  btrfs: scrub: errors in tree enumeration
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: unlock the trans lock properly
  Btrfs: don't map extent buffer if path->skip_locking is set
  Btrfs: fix duplicate checking logic
  Btrfs: fix the allocator loop logic
  Btrfs: fix bitmap regression
  Btrfs: don't commit the transaction if we dont have enough pinned bytes
  Btrfs: noinline the cluster searching functions
  Btrfs: cache bitmaps when searching for a cluster

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda: Fix inaudible internal speakers on CyberpowerPC Gamer Xplorer N57001 laptop
  ALSA: Use %pV for snd_printk()
  ALSA: hda - Fix initialization of hp pins with master_mute in Realtek
  ALSA: hda - Fix invalid unsol tag for some alc262 model quirks
  ASoC: SAMSUNG: Fix the incorrect referencing of I2SCON register
  ASoC: snd_soc_new_{mixer,mux,pga} make sure to use right DAPM context
  ASoC: fsl: fix initialization of DMA buffers
  ASoC: WM8804 does not support sample rates below 32kHz
  ASoC: Fix WM8962 headphone volume update for use of advanced caches
  ASoC: Blackfin: bf5xx-ad1836: Fix codec device name
  ALSA: hda: Fix quirk for Dell Inspiron 910
  ASoC: AD1836: Fix setting the PCM format
  ASoC: Check for NULL register bank in snd_soc_get_cache_val()
  ASoC: Add missing break in WM8915 FLL source selection
  ASoC: Only update SYSCLK_ENA when pausing WM8915 SYSCLK
  ASoC: atmel_ssc: Don't try to free ssc if request failed

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide-cd: signedness warning fix again

* 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6:
  gpio/basic_mmio: add missing include of spinlock_types.h
  gpio/nomadik: fix sleepmode for elder Nomadik

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (55 commits)
  ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()
  netpoll: call dev_put() on error in netpoll_setup()
  net: ep93xx_eth: fix DMA API violations
  net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()
  net: ep93xx_eth: allocate buffers using kmalloc()
  net: ep93xx_eth: pass struct device to DMA API functions
  ep93xx: set DMA masks for the ep93xx_eth
  vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check
  dl2k: EEPROM CRC calculation wrong endianess on bigendian machine
  NET: am79c961: fix assembler warnings
  NET: am79c961: ensure multicast filter is correctly set at open
  NET: am79c961: ensure asm() statements are marked volatile
  ethtool.h: fix typos
  ep93xx_eth: Update MAINTAINERS
  ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data
  netpoll: prevent netpoll setup on slave devices
  net: pmtu_expires fixes
  gianfar:localized filer table
  iwlegacy: fix channel switch locking
  mac80211: fix IBSS teardown race
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  AppArmor: Fix sleep in invalid context from task_setrlimit

We leak the memory allocated to 'phi' when the variable goes out of scope
in hfcsusb_ph_info().
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a dev_put(ndev) missing on an error path.  This was
introduced in 0c1ad04a "netpoll: prevent netpoll setup on slave
devices".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King said:
>
> So, to summarize what its doing:
>
> 1. It allocates buffers for rx and tx.
> 2. It maps them with dma_map_single().
>       This transfers ownership of the buffer to the DMA device.
> 3. In ep93xx_xmit,
> 3a. It copies the data into the buffer with skb_copy_and_csum_dev()
>       This violates the DMA buffer ownership rules - the CPU should
>       not be writing to this buffer while it is (in principle) owned
>       by the DMA device.
> 3b. It then calls dma_sync_single_for_cpu() for the buffer.
>       This transfers ownership of the buffer to the CPU, which surely
>       is the wrong direction.
> 4. In ep93xx_rx,
> 4a. It calls dma_sync_single_for_cpu() for the buffer.
>       This at least transfers the DMA buffer ownership to the CPU
>       before the CPU reads the buffer
> 4b. It then uses skb_copy_to_linear_data() to copy the data out.
>       At no point does it transfer ownership back to the DMA device.
> 5. When the driver is removed, it dma_unmap_single()'s the buffer.
>       This transfers ownership of the buffer to the CPU.
> 6. It frees the buffer.
>
> While it may work on ep93xx, it's not respecting the DMA API rules,
> and with DMA debugging enabled it will probably encounter quite a few
> warnings.

This patch fixes these violations.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit a197b59a (mm: fail GFP_DMA allocations when ZONE_DMA is not
configured) made page allocator to return NULL if GFP_DMA is set but
CONFIG_ZONE_DMA is disabled.

This causes ep93xx_eth to fail:

 WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638()
 Modules linked in:
 [<c0035498>] (unwind_backtrace+0x0/0xf4) from [<c0043da4>] (warn_slowpath_common+0x48/0x60)
 [<c0043da4>] (warn_slowpath_common+0x48/0x60) from [<c0043dd8>] (warn_slowpath_null+0x1c/0x24)
 [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) from [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638)
 [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) from [<c00366fc>] (__dma_alloc+0x8c/0x3ec)
 [<c00366fc>] (__dma_alloc+0x8c/0x3ec) from [<c0036adc>] (dma_alloc_coherent+0x54/0x60)
 [<c0036adc>] (dma_alloc_coherent+0x54/0x60) from [<c0227808>] (ep93xx_open+0x20/0x864)
 [<c0227808>] (ep93xx_open+0x20/0x864) from [<c0283144>] (__dev_open+0xb8/0x108)
 [<c0283144>] (__dev_open+0xb8/0x108) from [<c0280528>] (__dev_change_flags+0x70/0x128)
 [<c0280528>] (__dev_change_flags+0x70/0x128) from [<c0283054>] (dev_change_flags+0x10/0x48)
 [<c0283054>] (dev_change_flags+0x10/0x48) from [<c001a720>] (ip_auto_config+0x190/0xf68)
 [<c001a720>] (ip_auto_config+0x190/0xf68) from [<c00233b0>] (do_one_initcall+0x34/0x18c)
 [<c00233b0>] (do_one_initcall+0x34/0x18c) from [<c0008400>] (kernel_init+0x94/0x134)
 [<c0008400>] (kernel_init+0x94/0x134) from [<c0030858>] (kernel_thread_exit+0x0/0x8)

Since there is no restrictions for DMA on ep93xx, we can fix this by just
removing the GFP_DMA flag from the call.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can use simply kmalloc() to allocate the buffers. This also simplifies the
code and allows us to perform DMA sync operations more easily.

Memory is allocated with only GFP_KERNEL since there are no DMA allocation
restrictions on this platform.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

We shouldn't use NULL for any DMA API functions, unless we are dealing with
ISA or EISA device. So pass correct struct dev pointer to these functions.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the driver uses the DMA API, we should pass it valid DMA masks.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag
but rather in vlan_do_receive.  Otherwise the vlan header
will not be properly put on the packet in the case of
vlan header accelleration.

As we remove the check from vlan_check_reorder_header
rename it vlan_reorder_header to keep the naming clean.

Fix up the skb->pkt_type early so we don't look at the packet
after adding the vlan tag, which guarantees we don't goof
and look at the wrong field.

Use a simple if statement instead of a complicated switch
statement to decided that we need to increment rx_stats
for a multicast packet.

Hopefully at somepoint we will just declare the case where
VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove
the code.  Until then this keeps it working correctly.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix:
/tmp/ccvoZ6h8.s: Assembler messages:
/tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order

by ensuring that we have temporary variables placed into specific
registers.  Reorder the code a bit to allow the resulting assembly
to be slightly more optimal.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

We were clearing out the multicast filter whenever the interface was
upped, and not setting the mode bits correctly.  This can cause
problems if there are any multicast addresses already set at this
point, or if ALLMULTI was set.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Without this the compiler can (and does) optimize register reads away
from within loops, and other such optimizations.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the legit warnings 'make W=3 drivers/ide/ide-cd.c'
generates is:
drivers/ide/ide-cd.c: In function ide_cd_do_request
drivers/ide/ide-cd.c:828:2: warning: conversion to int from \
unsigned int may change the sign of the result
drivers/ide/ide-cd.c:833:2: warning: conversion to int from \
unsigned int may change the sign of the result

nsectors is declared int, should be unsigned int.

blk_rq_sectors() returns unsigned int, and ide_complete_rq
expects unsigned int as well.  Fixes both warnings.
Signed-off-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It uses cpu_relax(), and so needs <asm/processor.h>

Without this patch, I see:

   CC      arch/mn10300/kernel/asm-offsets.s
  In file included from include/linux/time.h:8,
                   from include/linux/timex.h:56,
                   from include/linux/sched.h:57,
                   from arch/mn10300/kernel/asm-offsets.c:7:
  include/linux/seqlock.h: In function 'read_seqbegin':
  include/linux/seqlock.h:91: error: implicit declaration of function 'cpu_relax'

whilst building asb2364_defconfig on MN10300.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>