- 08 Jun, 2017 19 commits
-
-
Quentin Schulz authored
This adds support in X-Powers AXP20X and AXP22X battery driver for a fixed battery in DT. It will take the minimum supported voltage by the battery as defined in the battery DT node and set the V_OFF register to this value, telling the system to shut down if the supplied power is below this value. Signed-off-by:
Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk>
-
Liam Breck authored
Previously there was no way to configure these chips in the event that the defaults didn't match the battery in question. For chips with RAM data memory (and also those with flash/NVM data memory if CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is defined and the user has not set module param dt_monitored_battery_updates_nvm=0) we now call power_supply_get_battery_info(), check its values, and write battery properties to chip data memory if there is a dm_regs table for the chip. Signed-off-by:
Matt Ranostay <matt@ranostay.consulting> Signed-off-by:
Liam Breck <kernel@networkimprov.net> Signed-off-by:
-
Liam Breck authored
Add these to enable read/write of chip data memory RAM/NVM/flash: bq27xxx_battery_seal() bq27xxx_battery_unseal() bq27xxx_battery_set_cfgupdate() bq27xxx_battery_soft_reset() bq27xxx_battery_read_dm_block() bq27xxx_battery_write_dm_block() bq27xxx_battery_checksum_dm_block() Signed-off-by:
-
Matt Ranostay authored
Declare bus.write/read_bulk/write_bulk(). Add I2C write/read_bulk/write_bulk() to implement the above. Add bq27xxx_write/read_block/write_block() helpers to call the above. Signed-off-by:
"Andrew F. Davis" <afd@ti.com> Signed-off-by:
-
Liam Breck authored
Document monitored-battery = <&battery_node> Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Liam Breck authored
Battery chargers use POWER_SUPPLY_PROP_PRECHARGE_CURRENT Clarify related item POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT Signed-off-by:
-
Liam Breck authored
power_supply_get_battery_info() reads battery data from devicetree. struct power_supply_battery_info provides battery data to drivers. Its fields correspond to elements in enum power_supply_property. Drivers may surface battery data in sysfs via corresponding POWER_SUPPLY_PROP_* fields. Signed-off-by:
-
Liam Breck authored
Documentation of static battery characteristics that can be defined for batteries that do not embed this data, which are required by fuel-gauge and charger chips for proper handling of the battery. The following properties are defined: voltage-min-design-microvolt charge-full-design-microamp-hours energy-full-design-microwatt-hours precharge-current-microamp charge-term-current-microamp constant-charge-current-max-microamp constant-charge-voltage-max-microamp Property names are derived from corresponding elements in enum power_supply_property from include/linux/power_supply.h https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/linux/power_supply.h Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by:
-
Matt Ranostay authored
Add entries for microwatt-hours and microamp-hours. Cc: Rob Herring <robh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sebastian Reichel <sre@kernel.org> Acked-by:
-
Tony Lindgren authored
On the CPCAP PMIC we can use the ADCs for monitoring the battery, and there is also a coulomb counter. So let's add basic support for the battery driver. I did not add any capacity prediction as that should probably be done in the user space. Or at least user space should tell the kernel some battery statistics and then the kernel driver could display the capacity based on that. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Tony Lindgren authored
Add binding for cpcap pmic battery. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Florian Fainelli authored
On Broadcom MIPS STB platforms, BMIPS_GENERIC is the Kconfig symbol that is used, make this reboot driver default to that value to make sure we can reboot a system properly. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Since commit 37eb56dc ("arm64: Add Broadcom Set Top Box Kconfig entry point") we have ARCH_BRCMSTB also visible on ARM64 platform, yet this reboot driver was not selectable, so fix that. Signed-off-by:
-
Alexandre Belloni authored
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Alexandre Belloni authored
Assembly in at91_lpddr_poweroff has r0 in the clobber list but uses r6. Reported-by:
-
H. Nikolaus Schaller authored
Since we now support the standard 'input_current_limit' property by commit 3fb319c2 ("power: supply: twl4030-charger: add writable INPUT_CURRENT_LIMIT property") we can now remove the nonstandard 'max_current' sysfs attribute. See Documentation/power/power_supply_class.txt line 125 Both are functionally equivalent. From ABI point of view it is just a rename of the property. This also removes the entry in Documentation/ABI/testing/sysfs-class-power-twl4030 Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Dan Carpenter authored
There are several cut and past bugs here. ltc3651_charger->charger is NULL at this point, so we return success instead of the intended error codes. Fixes: c94d4ed0 ("power: supply: Add ltc3651-charger driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> [Wei Yongjun found the same issue independently] Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by:
-
David Lechner authored
This fixes the TODO to parse strings and convert them to enum values when writing to a power_supply class property sysfs attribute. There is at least one driver that has a writable enum property that previously could only be written as an integer, so a fallback to writing enums as integers instead of strings is provided so we don't break existing userspace programs. Signed-off-by:
David Lechner <david@lechnology.com> Signed-off-by:
-
Benson Leung authored
Apple currently supports three very common USB chargers: https://www.apple.com/power-adapters/ These chargers implement a proprietary Apple method for advertising 1A, 2.1A, and 2.4A at 5V called "Brick ID". In addition, 3rd parties implement the same charging method in many charging accessories that work with iOS devices. Devices that have charger detection chips such as the Pericom PI3USB9281, eg. Google Chromebook Pixel 2015, are capable of detecting these chargers, so let's add a type to facilicate passing that info up to userspace. This adds a separate power supply type for Apple's proprietary "Brick ID" charging method. Signed-off-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
- 15 May, 2017 4 commits
-
-
Hans de Goede authored
On devicetree using platforms the devicetree can provide info on which power-supplies supply another power-supply through phandles. This commit adds support for providing this info on non devicetree platforms through the platform code setting a supplied-from device-property on the power-supplies parent device. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Julia Lawall authored
Drop static on a local variable, when the variable is either first initialized or never used, on every possible execution path through the function. The static has no benefit, and dropping it reduces the code size. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; // </smpl> The change in code size is indicates by the following output from the size command. before: text data bss dec hex filename 2865 252 8 3125 c35 drivers/power/supply/axp20x_usb_power.o after: text data bss dec hex filename 2822 252 0 3074 c02 drivers/power/supply/axp20x_usb_power.o Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Mike Looijmans authored
The LTC3651 reports its status via GPIO lines. This driver translates the GPIO levels to battery charger status information via sysfs. It relies on devicetree to supply the IO configuration. Signed-off-by:
-
Mike Looijmans authored
This adds the devicetree bindings documentation for the LTC3651 battery charger. Signed-off-by:
-
- 14 May, 2017 2 commits
-
-
Tony Lindgren authored
With the ADC driver working, we can now fix the voltage table based on the values read from the ADC. Note that unlike the ICHRG registers, the VCHRG register bits don't match the MC13783UG.pdf. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
Tony Lindgren authored
Turns out a similar battery charger hardware is documented for NXP MC13783 PMIC in "MC13783 Power Management and Audio Circuit Users's Guide" named MC13783UG.pdf. Looks like the CPCAP charge current table matches that, so let's start using the nominal values from it. While at it, let's also add comments to some of the mystery CPCAP charger registers based on the MC13783UG.pdf documentation. Note that this patch does not contain any functional changes, the register values being used stay the same. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Signed-off-by:
-
- 13 May, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull some more input subsystem updates from Dmitry Torokhov: "An updated xpad driver with a few more recognized device IDs, and a new psxpad-spi driver, allowing connecting Playstation 1 and 2 joypads via SPI bus" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: cros_ec_keyb - remove extraneous 'const' Input: add support for PlayStation 1/2 joypads connected via SPI Input: xpad - add USB IDs for Mad Catz Brawlstick and Razer Sabertooth Input: xpad - sync supported devices with xboxdrv Input: xpad - sort supported devices by USB ID
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/umlLinus Torvalds authored
Pull UML fixes from Richard Weinberger: "No new stuff, just fixes" * 'for-linus-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Add missing NR_CPUS include um: Fix to call read_initrd after init_bootmem um: Include kbuild.h instead of duplicating its macros um: Fix PTRACE_POKEUSER on x86_64 um: Set number of CPUs um: Fix _print_addr()
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "15 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm, docs: update memory.stat description with workingset* entries mm: vmscan: scan until it finds eligible pages mm, thp: copying user pages must schedule on collapse dax: fix PMD data corruption when fault races with write dax: fix data corruption when fault races with write ext4: return to starting transaction in ext4_dax_huge_fault() mm: fix data corruption due to stale mmap reads dax: prevent invalidation of mapped DAX entries Tigran has moved mm, vmalloc: fix vmalloc users tracking properly mm/khugepaged: add missed tracepoint for collapse_huge_page_swapin gcov: support GCC 7.1 mm, vmstat: Remove spurious WARN() during zoneinfo print time: delete current_fs_time() hwpoison, memcg: forcibly uncharge LRU pages
-
- 12 May, 2017 10 commits
-
-
Roman Gushchin authored
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.comSigned-off-by:Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Minchan Kim authored
Although there are a ton of free swap and anonymous LRU page in elgible zones, OOM happened. balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null), order=0, oom_score_adj=0 CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x21d/0x3f0 out_of_memory+0xd8/0x390 __alloc_pages_slowpath+0xbc1/0xc50 __alloc_pages_nodemask+0x1a5/0x1c0 pte_alloc_one+0x20/0x50 __pte_alloc+0x1e/0x110 __handle_mm_fault+0x919/0x960 handle_mm_fault+0x77/0x120 __do_page_fault+0x27a/0x550 trace_do_page_fault+0x43/0x150 do_async_page_fault+0x2c/0x90 async_page_fault+0x28/0x30 Mem-Info: active_anon:424716 inactive_anon:65314 isolated_anon:0 active_file:52 inactive_file:46 isolated_file:0 unevictable:0 dirty:27 writeback:0 unstable:0 slab_reclaimable:3967 slab_unreclaimable:4125 mapped:133 shmem:43 pagetables:1674 bounce:0 free:4637 free_pcp:225 free_cma:0 Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 992 992 1952 DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB lowmem_reserve[]: 0 0 0 959 Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB 378 total pagecache pages 17 pages in swap cache Swap cache stats: add 17325, delete 17302, find 0/27 Free swap = 978940kB Total swap = 1048572kB 524157 pages RAM 0 pages HighMem/MovableOnly 12629 pages reserved 0 pages cma reserved 0 pages hwpoisoned [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name [ 433] 0 433 4904 5 14 3 82 0 upstart-udev-br [ 438] 0 438 12371 5 27 3 191 -1000 systemd-udevd With investigation, skipping page of isolate_lru_pages makes reclaim void because it returns zero nr_taken easily so LRU shrinking is effectively nothing and just increases priority aggressively. Finally, OOM happens. The problem is that get_scan_count determines nr_to_scan with eligible zones so although priority drops to zero, it couldn't reclaim any pages if the LRU contains mostly ineligible pages. get_scan_count: size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx); size = size >> sc->priority; Assumes sc->priority is 0 and LRU list is as follows. N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H (Ie, small eligible pages are in the head of LRU but others are almost ineligible pages) In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from tail of the LRU are not eligible pages. If get_scan_count counts skipped pages, it doesn't reclaim any pages remained after scanning 4 pages so it ends up OOM happening. This patch makes isolate_lru_pages try to scan pages until it encounters eligible zones's pages. [akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.orgSigned-off-by:Minchan Kim <minchan@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
David Rientjes authored
We have encountered need_resched warnings in __collapse_huge_page_copy() while doing {clear,copy}_user_highpage() over HPAGE_PMD_NR source pages. mm->mmap_sem is held for write, but the iteration is well bounded. Reschedule as needed. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705101426380.109808@chino.kir.corp.google.comSigned-off-by:David Rientjes <rientjes@google.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Ross Zwisler authored
This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.comSigned-off-by:Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jan Kara authored
Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.czSigned-off-by: -
Jan Kara authored
DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6e Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.czSigned-off-by:
-
Jan Kara authored
Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.czSigned-off-by:
-
Ross Zwisler authored
Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.czSigned-off-by: -
Andrew Morton authored
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by:
-
Michal Hocko authored
Commit 1f5307b1 ("mm, vmalloc: properly track vmalloc users") has pulled asm/pgtable.h include dependency to linux/vmalloc.h and that turned out to be a bad idea for some architectures. E.g. m68k fails with In file included from arch/m68k/include/asm/pgtable_mm.h:145:0, from arch/m68k/include/asm/pgtable.h:4, from include/linux/vmalloc.h:9, from arch/m68k/kernel/module.c:9: arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page': >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function) #define pgd_offset_k(address) pgd_offset(&init_mm, address) as spotted by kernel build bot. nios2 fails for other reason In file included from include/asm-generic/io.h:767:0, from arch/nios2/include/asm/io.h:61, from include/linux/io.h:25, from arch/nios2/include/asm/pgtable.h:18, from include/linux/mm.h:70, from include/linux/pid_namespace.h:6, from include/linux/ptrace.h:9, from arch/nios2/include/uapi/asm/elf.h:23, from arch/nios2/include/asm/elf.h:22, from include/linux/elf.h:4, from include/linux/module.h:15, from init/main.c:16: include/linux/vmalloc.h: In function '__vmalloc_node_flags': include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'? which is due to the newly added #include <asm/pgtable.h>, which on nios2 includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which again includes <linux/vmalloc.h>. Tweaking that around just turns out a bigger headache than necessary. This patch reverts 1f5307b1 and reimplements the original fix in a different way. __vmalloc_node_flags can stay static inline which will cover vmalloc* functions. We only have one external user (kvmalloc_node) and we can export __vmalloc_node_flags_caller and provide the caller directly. This is much simpler and it doesn't really need any games with header files. [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: revert old comment] Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz Fixes: 1f5307b1 ("mm, vmalloc: properly track vmalloc users") Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.czSigned-off-by:
-
