1. 08 Mar, 2019 40 commits
    • Linus Torvalds's avatar
      Merge tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux · f8d35403
      Linus Torvalds authored
      Pull RTC updates from Alexandre Belloni:
       "There is an unusual amount of new drivers this cycle, and this
        explains the number of insertions.
      
        Other than that, the changes are the usual fixes and feature addition.
      
        Subsystem updates:
         - new quartz-load-femtofarads DT property for quartz load capacitance
         - remove rtc_class_ops.read_callback
      
        New drivers:
         - Abracon AB-RTCMC-32.768kHz-EOZ9
         - Amlogic Meson RTC
         - Cadence RTC IP
         - Microcrystal RV3028
         - Whwave sd3078
      
        Driver updates:
         - cmos: ignore bogus century byte
         - ds1307: rework rx8130 support
         - isl1208: add isl1209 support, nvmem support
         - rs5C372: report invalid time when the oscillator stopped
         - rx8581: add rx8571 support"
      
      * tag 'rtc-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (66 commits)
        rtc: pic32: convert to SPDX identifier
        rtc: pic32: let the core handle range
        rtc: pic32: convert to devm_rtc_allocate_device
        rtc: update my email address
        rtc: rv8803: convert to SPDX identifier
        rtc: rv8803: let the core handle range
        rtc: tx4939: convert to SPDX identifier
        rtc: tx4939: use .set_time
        rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
        rtc: tx4939: set range
        rtc: tx4939: remove useless test
        rtc: zynqmp: let the core handle range
        rtc: zynqmp: fix possible race condition
        rtc: imx-sc: use rtc_time64_to_tm
        rtc: rx8581: Add support for Epson rx8571 RTC
        dt-bindings: rtc: add rx8571 compatible
        rtc: pcf85063: remove dead code
        rtc: remove rtc_class_ops.read_callback
        rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
        dt-bindings: rtc: add ABEOZ9
        ...
      f8d35403
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal · 9f24a81e
      Linus Torvalds authored
      Pull thermal soc updates from Eduardo Valentin:
       "Specifics:
      
         - mediatek thermal now supports MT8183
      
         - broadcom thermal now supports Stingray
      
         - qoirq now supports multiple sensors
      
         - fixes on different drivers: rcar, tsens, tegra
      
        Some new drivers are still pending further review and I chose to leave
        them for the next merge window while still sending this material"
      
      * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
        thermal: rcar_gen3_thermal: Register hwmon sysfs interface
        thermal/qcom/tsens-common : fix possible object reference leak
        thermal: tegra: add get_trend ops
        thermal: tegra: fix memory allocation
        thermal: tegra: remove unnecessary warnings
        thermal: mediatek: add support for MT8183
        dt-bindings: thermal: add binding document for mt8183 thermal controller
        thermal: mediatek: add flag for bank selection
        thermal: mediatek: add thermal controller offset
        thermal: mediatek: add calibration item
        thermal: mediatek: add common index of vts settings.
        thermal: mediatek: fix register index error
        thermal: qoriq: add multiple sensors support
        thermal: broadcom: Add Stingray thermal driver
        dt-bindings: thermal: Add binding document for SR thermal
      9f24a81e
    • Linus Torvalds's avatar
      Merge branch 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft · 564e7411
      Linus Torvalds authored
      Pull ibft updates from Konrad Rzeszutek Wilk:
       "Two tiny fixes - a missing break, and upgrading the subsystem to use
        modern macros"
      
      * 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
        iscsi_ibft: use virt_to_phys instead of isa_virt_to_bus
        iscsi_ibft: Fix missing break in switch statement
      564e7411
    • Linus Torvalds's avatar
      Merge branch 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb · e4ff63b4
      Linus Torvalds authored
      Pull swiotlb updates from Konrad Rzeszutek Wilk:
       "Expands the SWIOTLB to have debugfs support (along with bug-fixes),
        and a tiny fix"
      
      * 'stable/for-linus-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
        swiotlb: drop pointless static qualifier in swiotlb_create_debugfs()
        swiotlb: checking whether swiotlb buffer is full with io_tlb_used
        swiotlb: add debugfs to track swiotlb buffer usage
        swiotlb: fix comment on swiotlb_bounce()
      e4ff63b4
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 6c3f98fa
      Linus Torvalds authored
      Pull i2c updates from Wolfram Sang:
      
       - the I2C core gained helpers to assist drivers in handling their
         suspended state, and drivers were converted to use it
      
       - two new fault-injectors for stress-testing
      
       - bigger refactoring and feature improvements for the ocores,
         sh_mobile, and tegra drivers
      
       - platform_data removal for the at24 EEPROM driver
      
       - ... and various improvements and bugfixes all over the subsystem
      
      * 'i2c/for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
        i2c: Allow recovery of the initial IRQ by an I2C client device.
        i2c: ocores: turn incomplete kdoc into a comment
        i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
        i2c: tegra: Only display error messages if DMA setup fails
        i2c: gpio: fault-injector: add 'inject_panic' injector
        i2c: gpio: fault-injector: add 'lose_arbitration' injector
        i2c: tegra: remove multi-master support
        i2c: tegra: remove master fifo support on tegra186
        i2c: tegra: change phrasing, "fallbacking" to "falling back"
        i2c: expand minor range when registering chrdev region
        i2c: aspeed: Add multi-master use case support
        i2c: core-smbus: don't trace smbus_reply data on errors
        i2c: ocores: Add support for bus clock via platform data
        i2c: ocores: Add support for IO mapper registers.
        i2c: ocores: checkpatch fixes
        i2c: ocores: add SPDX tag
        i2c: ocores: add polling interface
        i2c: ocores: do not handle IRQ if IF is not set
        i2c: ocores: stop transfer on timeout
        i2c: tegra: add i2c interface timing support
        ...
      6c3f98fa
    • Linus Torvalds's avatar
      Merge tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply · 1cabd3e0
      Linus Torvalds authored
      Pull power supply and reset updates from Sebastian Reichel:
       "Nothing too fancy in the power-supply subsystem this time. There are
        less patches than usual, since I did not have enough time to review
        them in time. The good news is, that all patches have been in
        linux-next for more than two weeks and there are no complicated
        cross-subsystem patchsets this time!
      
        Summary:
      
         - at91-reset: add sam9x60 support
      
         - sc27xx: improve capacity logic
      
         - goldfish_battery: enhance driver by adding many new properties
      
         - isp1704: drop platform data and migrate to gpiod
      
         - misc small fixes and improvements"
      
      * tag 'for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (25 commits)
        power: reset: at91-reset: add support for sam9x60 SoC
        dt-bindings: arm: atmel: add new sam9x60 reset controller binding
        dt-bindings: arm: atmel: add missing samx7 to reset controller
        max17042_battery: fix potential use-after-free on device remove
        power: supply: core: Add a field to support battery max voltage
        dt-bindings: power: supply: Add voltage-max-design-microvolt property
        bq27x00: use cached flags
        power: supply: ds2782: fix possible use-after-free on remove
        power: supply: bq25890: show max charge current/voltage as configured
        power: supply: sc27xx: Fix capacity saving function
        power: supply: sc27xx: Fix the incorrect formula when converting capacity to coulomb counter
        power: supply: sc27xx: Add one property to read charge voltage
        dt-bindings: power: sc27xx: Add one IIO channel to read charge voltage
        drivers: power: supply: goldfish_battery: Add support for reading more properties
        power: supply: charger-manager: Fix trivial language typos
        cpcap-charger: generate events for userspace
        power: supply: remove some duplicated includes
        power: twl4030: fix a missing check of return value
        drivers: power: supply: goldfish_battery: Use tabs for alignment
        drivers: power: supply: goldfish_battery: Fix alignment
        ...
      1cabd3e0
    • Linus Torvalds's avatar
      Merge tag 'hsi-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi · 7427e286
      Linus Torvalds authored
      Pull HIS update from Sebastian Reichel:
       "Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE"
      
      * tag 'hsi-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
        HSI: omap_ssi_port: fix debugfs_simple_attr.cocci warnings
      7427e286
    • Linus Torvalds's avatar
      Merge tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi · 039cd25f
      Linus Torvalds authored
      Pull IPMI updates from Corey Minyard:
       "A couple of bug fixes and a bunch of code cleanup:
      
         - Fix a use after free error in a certain error situation.
      
         - Fix some flag handling issues in the SSIF (I2C) IPMI driver.
      
         - A bunch of cleanups, spacing issues, converting pr_xxx to dev_xxx,
           use standard UUID handling, and some other minor stuff.
      
         - The IPMI code was creating a platform device if none was supplied.
           Instead of doing that, have every source that creates an IPMI
           device supply a device struct. This fixes several issues,including
           a crash in one situation, and cleans things up a bit"
      
      * tag 'for-linus-5.1' of git://github.com/cminyard/linux-ipmi:
        ipmi_si: Potential array underflow in hotmod_handler()
        ipmi_si: Remove hacks for adding a dummy platform devices
        ipmi_si: Consolidate scanning the platform bus
        ipmi_si: Remove hotmod devices on removal and exit
        ipmi_si: Remove hardcode IPMI devices by scanning the platform bus
        ipmi_si: Switch hotmod to use a platform device
        ipmi: Consolidate the adding of platform devices
        ipmi_si: Rename addr_type to addr_space to match what it does
        ipmi_si: Convert some types into unsigned
        ipmi_si: Fix crash when using hard-coded device
        ipmi: Use dedicated API for copying a UUID
        ipmi: Use defined constant for UUID representation
        ipmi:ssif: Change some pr_xxx to dev_xxx calls
        ipmi: kcs_bmc: handle devm_kasprintf() failure case
        ipmi: Fix return value when a message is truncated
        ipmi: clean an indentation issue, remove extraneous space
        ipmi: Make the smi watcher be disabled immediately when not needed
        ipmi: Fix how the lower layers are told to watch for messages
        ipmi: Fix SSIF flag requests
        ipmi_si: fix use-after-free of resource->name
      039cd25f
    • Linus Torvalds's avatar
      Merge branch 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · e13284da
      Linus Torvalds authored
      Pull RAS updates from Borislav Petkov:
       "This time around we have in store:
      
         - Disable MC4_MISC thresholding banks on all AMD family 0x15 models
           (Shirish S)
      
         - AMD MCE error descriptions update and error decode improvements
           (Yazen Ghannam)
      
         - The usual smaller conversions and fixes"
      
      * 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86/mce: Improve error message when kernel cannot recover, p2
        EDAC/mce_amd: Decode MCA_STATUS in bit definition order
        EDAC/mce_amd: Decode MCA_STATUS[Scrub] bit
        EDAC, mce_amd: Print ExtErrorCode and description on a single line
        EDAC, mce_amd: Match error descriptions to latest documentation
        x86/MCE/AMD, EDAC/mce_amd: Add new error descriptions for some SMCA bank types
        x86/MCE/AMD, EDAC/mce_amd: Add new McaTypes for CS, PSP, and SMU units
        x86/MCE/AMD, EDAC/mce_amd: Add new MP5, NBIO, and PCIE SMCA bank types
        RAS: Add a MAINTAINERS entry
        RAS: Use consistent types for UUIDs
        x86/MCE/AMD: Carve out the MC4_MISC thresholding quirk
        x86/MCE/AMD: Turn off MC4_MISC thresholding on all family 0x15 models
        x86/MCE: Switch to use the new generic UUID API
      e13284da
    • Linus Torvalds's avatar
      Merge tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp · 1b37b8c4
      Linus Torvalds authored
      Pull EDAC updates from Borislav Petkov:
      
       - A new EDAC AST 2500 SoC driver (Stefan M Schaeckeler)
      
       - New i10nm EDAC driver for Intel 10nm CPUs (Qiuxu Zhuo and Tony Luck)
      
       - Altera SDRAM functionality carveout for separate enablement of RAS
         and SDRAM capabilities on some Altera chips. (Thor Thayer)
      
       - The usual round of cleanups and fixes
      
      And last but not least: recruit James Morse as a reviewer for the ARM
      side.
      
      * tag 'edac_for_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
        EDAC/altera: Add separate SDRAM EDAC config
        EDAC, altera: Add missing of_node_put()
        EDAC, skx_common: Add code to recognise new compound error code
        EDAC, i10nm: Fix randconfig builds
        EDAC, i10nm: Add a driver for Intel 10nm server processors
        EDAC, skx_edac: Delete duplicated code
        EDAC, skx_common: Separate common code out from skx_edac
        EDAC: Do not check return value of debugfs_create() functions
        EDAC: Add James Morse as a reviewer
        dt-bindings, EDAC: Add Aspeed AST2500
        EDAC, aspeed: Add an Aspeed AST2500 EDAC driver
      1b37b8c4
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid · c6400e5c
      Linus Torvalds authored
      Pull HID updates from Jiri Kosina:
      
       - support for Pro Pen slim, from Jason Gerecke
      
       - power management improvements to Intel-ISH driver, from Song Hongyan
      
       - UCLogic driver revamp in order to be able to support wider range of
         Huion tablets, from Nikolai Kondrashov
      
       - Asus Transbook support, from NOGUCHI Hiroshi
      
       - other assorted small bugfixes / cleanups and device ID additions
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits)
        HID: Remove Waltop tablets from hid_have_special_driver
        HID: Remove KYE tablets from hid_have_special_driver
        HID: Remove hid-uclogic entries from hid_have_special_driver
        HID: uclogic: Do not initialize non-USB devices
        HID: uclogic: Add support for Ugee G5
        HID: uclogic: Support Gray-coded rotary encoders
        HID: uclogic: Support faking Wacom pad device ID
        HID: uclogic: Add support for XP-Pen Deco 01
        HID: uclogic: Add support for XP-Pen Star G640
        HID: uclogic: Add support for XP-Pen Star G540
        HID: uclogic: Add support for Ugee EX07S frame controls
        HID: uclogic: Add support for Ugee M540
        HID: uclogic: Add support for Ugee 2150
        HID: uclogic: Support v2 protocol
        HID: uclogic: Support fragmented high-res reports
        HID: uclogic: Support in-range reporting emulation
        HID: uclogic: Designate current protocol v1
        HID: uclogic: Re-initialize tablets on resume
        HID: uclogic: Extract tablet parameter discovery into a module
        HID: uclogic: Extract report descriptors to a module
        ...
      c6400e5c
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching · b7af27bf
      Linus Torvalds authored
      Pull livepatching updates from Jiri Kosina:
      
       - support for something we call 'atomic replace', and allows for much
         better handling of cumulative patches (which is something very useful
         for distros), from Jason Baron with help of Petr Mladek and Joe
         Lawrence
      
       - improvement of handling of tasks blocking finalization, from Miroslav
         Benes
      
       - update of MAINTAINERS file to reflect move towards group
         maintainership
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: (22 commits)
        livepatch/selftests: use "$@" to preserve argument list
        livepatch: Module coming and going callbacks can proceed with all listed patches
        livepatch: Proper error handling in the shadow variables selftest
        livepatch: return -ENOMEM on ptr_id() allocation failure
        livepatch: Introduce klp_for_each_patch macro
        livepatch: core: Return EOPNOTSUPP instead of ENOSYS
        selftests/livepatch: add DYNAMIC_DEBUG config dependency
        livepatch: samples: non static warnings fix
        livepatch: update MAINTAINERS
        livepatch: Remove signal sysfs attribute
        livepatch: Send a fake signal periodically
        selftests/livepatch: introduce tests
        livepatch: Remove ordering (stacking) of the livepatches
        livepatch: Atomic replace and cumulative patches documentation
        livepatch: Remove Nop structures when unused
        livepatch: Add atomic replace
        livepatch: Use lists to manage patches, objects and functions
        livepatch: Simplify API by removing registration step
        livepatch: Don't block the removal of patches loaded after a forced transition
        livepatch: Consolidate klp_free functions
        ...
      b7af27bf
    • Linus Torvalds's avatar
      Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm · 851ca779
      Linus Torvalds authored
      Pull drm updates from Dave Airlie:
       "This is the main drm pull request for the 5.1 merge window.
      
        The big changes I'd highlight are:
         - nouveau has HMM support now, there is finally an in-tree user so we
           can quieten down the rip it out people.
         - i915 now enables fastboot by default on Skylake+
         - Displayport Multistream support has been refactored and should
           hopefully be more reliable.
      
        Core:
         - header cleanups aiming towards removing drmP.h
         - dma-buf fence seqnos to 64-bits
         - common helper for DP mst hotplug for radeon,i915,amdgpu + new
           refcounting scheme
         - MST i2c improvements
         - drm_syncobj_cb removal
         - ARM FB compression fourcc
         - P010 + P016 fourcc
         - allwinner tiled format modifier
         - i2c over aux I2C_M_STOP support
         - DRM_AUTH handling fixes
      
        TTM:
         - ref/unref renaming
      
        New driver:
         - ARM komeda display driver
      
        scheduler:
         - refactor mirror list handling
         - rework hw fence processing
         - 0 run queue entity fix
      
        bridge:
         - TI DS90C185 LVDS bridge
         - thc631lvdm83d bridge improvements
         - cadence + allwinner DSI ported to generic phy
      
        panels:
         - Sitronix ST7701 panel
         - Kingdisplay KD097D04
         - LeMaker BL035-RGB-002
         - PDA 91-00156-A0
         - Innolux EE101IA-01D
      
        i915:
         - Enable fastboot by default on SKL+/VLV/CHV
         - Export RPCS configuration for ICL media driver
         - Coffelake PCI ID
         - CNL clocks setup fixes
         - ACPI/PMIC support for MIPI/DSI
         - Per-engine WA init for all engines
         - Shrinker locking fixes
         - Kerneldoc updates
         - Lots of ring improvements and reset fixes
         - Coffeelake GVT Support
         - VFIO GVT EDID Region support
         - runtime PM wakeref tracking
         - ILK->IVB primary plane enable delays
         - userptr mutex locking fixes
         - DSI fixes
         - LVDS/TV cleanups
         - HW readout fixes
         - LUT robustness fixes
         - ICL display and watermark fixes
         - gem mmap race fix
      
        amdgpu:
         - add scheduled dependencies interface
         - DCC on scanout surfaces
         - vega10/20 BACO support
         - Multiple IH rings on soc15
         - XGMI locking fixes
         - DC i2c/aux cleanups
         - runtime SMU debug interface
         - Kexec improvmeents
         - SR-IOV fixes
         - DC freesync + ABM fixes
         - GDS fixes
         - GPUVM fixes
         - vega20 PCIE DPM switching fixes
         - Context priority handling fixes
      
        radeon:
         - fix missing break in evergreen parser
      
        nouveau:
         - SVM support via HMM
      
        msm:
         - QCOM Compressed modifier support
      
        exynos:
         - s5pv210 rotator support
      
        imx:
         - zpos property support
         - pending update fixes
      
        v3d:
         - cache flush improvments
      
        vc4:
         - reflection support
         - HDMI overscan support
      
        tegra:
         - CEC refactoring
         - HDMI audio fixes
         - Tegra186 prep work
         - SOR crossbar device tree fixes
      
        sun4i:
         - implicit fencing support
         - YUV and scalar support improvements
         - A23 support
         - tiling fixes
      
        atmel-hlcdc:
         - clipping and rotation property fixes
      
        qxl:
         - BO and PRIME improvements
         - generic fbdev emulation
      
        dw-hdmi:
         - HDMI 2.0 2160p
         - YUV420 ouput
      
        rockchip:
         - implicit fencing support
         - reflection proerties
      
        virtio-gpu:
         - use generic fbdev emulation
      
        tilcdc:
         - cpufreq vs crtc init fix
      
        rcar-du:
         - R8A774C0 support
         - D3/E3 RGB output routing fixes and DPAD0 support
         - RA87744 LVDS support
      
        bochs:
         - atomic and generic fbdev emulation
         - ID mismatch error on bochs load
      
        meson:
         - remove firmware fbs"
      
      * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits)
        drm/amd/display: Use vrr friendly pageflip throttling in DC.
        drm/imx: only send commit done event when all state has been applied
        drm/imx: allow building under COMPILE_TEST
        drm/imx: imx-tve: depend on COMMON_CLK
        drm/imx: ipuv3-plane: add zpos property
        drm/imx: ipuv3-plane: add function to query atomic update status
        gpu: ipu-v3: prg: add function to get channel configure status
        gpu: ipu-v3: pre: add double buffer status readback
        drm/amdgpu: Bump amdgpu version for context priority override.
        drm/amdgpu/powerplay: fix typo in BACO header guards
        drm/amdgpu/powerplay: fix return codes in BACO code
        drm/amdgpu: add missing license on baco files
        drm/bochs: Fix the ID mismatch error
        drm/nouveau/dmem: use dma addresses during migration copies
        drm/nouveau/dmem: use physical vram addresses during migration copies
        drm/nouveau/dmem: extend copy function to allow direct use of physical addresses
        drm/nouveau/svm: new ioctl to migrate process memory to GPU memory
        drm/nouveau/dmem: device memory helpers for SVM
        drm/nouveau/svm: initial support for shared virtual memory
        drm/nouveau: prepare for enabling svm with existing userspace interfaces
        ...
      851ca779
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · b5dd0c65
      Linus Torvalds authored
      Merge more updates from Andrew Morton:
      
       - some of the rest of MM
      
       - various misc things
      
       - dynamic-debug updates
      
       - checkpatch
      
       - some epoll speedups
      
       - autofs
      
       - rapidio
      
       - lib/, lib/lzo/ updates
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (83 commits)
        samples/mic/mpssd/mpssd.h: remove duplicate header
        kernel/fork.c: remove duplicated include
        include/linux/relay.h: fix percpu annotation in struct rchan
        arch/nios2/mm/fault.c: remove duplicate include
        unicore32: stop printing the virtual memory layout
        MAINTAINERS: fix GTA02 entry and mark as orphan
        mm: create the new vm_fault_t type
        arm, s390, unicore32: remove oneliner wrappers for memblock_alloc()
        arch: simplify several early memory allocations
        openrisc: simplify pte_alloc_one_kernel()
        sh: prefer memblock APIs returning virtual address
        microblaze: prefer memblock API returning virtual address
        powerpc: prefer memblock APIs returning virtual address
        lib/lzo: separate lzo-rle from lzo
        lib/lzo: implement run-length encoding
        lib/lzo: fast 8-byte copy on arm64
        lib/lzo: 64-bit CTZ on arm64
        lib/lzo: tidy-up ifdefs
        ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size
        ipc: annotate implicit fall through
        ...
      b5dd0c65
    • Brajeswar Ghosh's avatar
    • YueHaibing's avatar
    • Luc Van Oostenryck's avatar
      include/linux/relay.h: fix percpu annotation in struct rchan · 62461ac2
      Luc Van Oostenryck authored
      The percpu member of this structure is declared as:
      	struct ... ** __percpu member;
      So its type is:
      	__percpu pointer to pointer to struct ...
      
      But looking at how it's used, its type should be:
      	pointer to __percpu pointer to struct ...
      and it should thus be declared as:
      	struct ... * __percpu *member;
      
      So fix the placement of '__percpu' in the definition of this
      structures.
      
      This silents a few Sparse's warnings like:
      	warning: incorrect type in initializer (different address spaces)
      	  expected void const [noderef] <asn:3> *__vpp_verify
      	  got struct sched_domain **
      
      Link: http://lkml.kernel.org/r/20190118144902.79065-1-luc.vanoostenryck@gmail.com
      Fixes: 017c59c0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
      Signed-off-by: default avatarLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
      Cc: Jens Axboe <axboe@suse.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      62461ac2
    • Sabyasachi Gupta's avatar
      arch/nios2/mm/fault.c: remove duplicate include · 9587d199
      Sabyasachi Gupta authored
      Remove linux/ptrace.h which is included more than once
      
      Link: http://lkml.kernel.org/r/5c45d345.1c69fb81.d90ed.8e05@mx.google.comSigned-off-by: default avatarSabyasachi Gupta <sabyasachi.linux@gmail.com>
      Cc: Ley Foon Tan <lftan@altera.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9587d199
    • Geert Uytterhoeven's avatar
      unicore32: stop printing the virtual memory layout · 1476ea25
      Geert Uytterhoeven authored
      Since commit ad67b74d ("printk: hash addresses printed with %p"),
      the virtual memory layout printed during boot up contains "ptrval"
      instead of actual addresses.
      
      Instead of changing the printing to "%px", and leaking virtual memory
      layout information again, just remove the printing completely, cfr.
      e.g.  commits 071929db ("arm64: Stop printing the virtual memory
      layout") and 31833332 ("m68k/mm: Stop printing the virtual memory
      layout").
      
      All interesting information (actual section sizes) is already printed by
      mem_init_print_info() just above anyway.
      
      Link: http://lkml.kernel.org/r/20190121152254.29079-1-geert+renesas@glider.beSigned-off-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      Reviewed-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1476ea25
    • Jann Horn's avatar
      MAINTAINERS: fix GTA02 entry and mark as orphan · cb66cb48
      Jann Horn authored
      The entry for GTA02 never had paths listed; fix that.  commit 9d76295a
      ("[ARM] GTA02/FreeRunner: Add machine definition"), which added the entry
      for GTA02, created two new files named
      arch/arm/mach-s3c2442/{include/mach/gta02.h,mach-gta02.c}, which were then
      renamed in commit dd6f01b5 ("ARM: S3C2440: move mach-s3c2440/* into
      mach-s3c24xx/") to
      arch/arm/mach-s3c24xx/{include/mach/gta02.h,mach-gta02.c}.
      
      Also, the GTA02 maintainer's email address is from a domain that doesn't
      have an MX record anymore and appears to have expired.  Remove the
      maintainer and mark the subsystem as orphan.
      
      Link: http://lkml.kernel.org/r/20190215140444.37060-1-jannh@google.comSigned-off-by: default avatarJann Horn <jannh@google.com>
      Cc: Nelson Castillo <arhuaco@freaks-unidos.net>
      Cc: Nelson Castillo <nelsoneci@gmail.com>
      Cc: Andy Green <andy@warmcat.com>
      Cc: Ben Dooks <ben-linux@fluff.org>
      Cc: Russell King <rmk+kernel@arm.linux.org.uk>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cb66cb48
    • Souptick Joarder's avatar
      mm: create the new vm_fault_t type · 3d353901
      Souptick Joarder authored
      Page fault handlers are supposed to return VM_FAULT codes, but some
      drivers/file systems mistakenly return error numbers.  Now that all
      drivers/file systems have been converted to use the vm_fault_t return
      type, change the type definition to no longer be compatible with 'int'.
      By making it an unsigned int, the function prototype becomes
      incompatible with a function which returns int.  Sparse will detect any
      attempts to return a value which is not a VM_FAULT code.
      
      VM_FAULT_SET_HINDEX and VM_FAULT_GET_HINDEX values are changed to avoid
      conflict with other VM_FAULT codes.
      
      [jrdr.linux@gmail.com: fix warnings]
        Link: http://lkml.kernel.org/r/20190109183742.GA24326@jordon-HP-15-Notebook-PC
      Link: http://lkml.kernel.org/r/20190108183041.GA12137@jordon-HP-15-Notebook-PCSigned-off-by: default avatarSouptick Joarder <jrdr.linux@gmail.com>
      Reviewed-by: default avatarWilliam Kucharski <william.kucharski@oracle.com>
      Reviewed-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Reviewed-by: default avatarMatthew Wilcox <willy@infradead.org>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Cc: Rik van Riel <riel@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3d353901
    • Mike Rapoport's avatar
      arm, s390, unicore32: remove oneliner wrappers for memblock_alloc() · c2938eeb
      Mike Rapoport authored
      arm, s390 and unicore32 use oneliner wrappers for memblock_alloc().
      Replace their usage with direct call to memblock_alloc().
      
      Link: http://lkml.kernel.org/r/1546248566-14910-7-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Suggested-by: default avatarChristoph Hellwig <hch@infradead.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <michal.simek@xilinx.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stafford Horne <shorne@gmail.com>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c2938eeb
    • Mike Rapoport's avatar
      arch: simplify several early memory allocations · b63a07d6
      Mike Rapoport authored
      There are several early memory allocations in arch/ code that use
      memblock_phys_alloc() to allocate memory, convert the returned physical
      address to the virtual address and then set the allocated memory to
      zero.
      
      Exactly the same behaviour can be achieved simply by calling
      memblock_alloc(): it allocates the memory in the same way as
      memblock_phys_alloc(), then it performs the phys_to_virt() conversion
      and clears the allocated memory.
      
      Replace the longer sequence with a simpler call to memblock_alloc().
      
      Link: http://lkml.kernel.org/r/1546248566-14910-6-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <michal.simek@xilinx.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stafford Horne <shorne@gmail.com>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b63a07d6
    • Mike Rapoport's avatar
      openrisc: simplify pte_alloc_one_kernel() · 1e8ffd50
      Mike Rapoport authored
      The pte_alloc_one_kernel() function allocates a page using
      __get_free_page(GFP_KERNEL) when mm initialization is complete and
      memblock_phys_alloc() on the earlier stages.  The physical address of
      the page allocated with memblock_phys_alloc() is converted to the
      virtual address and in the both cases the allocated page is cleared
      using clear_page().
      
      The code is simplified by replacing __get_free_page() with
      get_zeroed_page() and by replacing memblock_phys_alloc() with
      memblock_alloc().
      
      Link: http://lkml.kernel.org/r/1546248566-14910-5-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Acked-by: default avatarStafford Horne <shorne@gmail.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <michal.simek@xilinx.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1e8ffd50
    • Mike Rapoport's avatar
      sh: prefer memblock APIs returning virtual address · 47f1e926
      Mike Rapoport authored
      Rather than use the memblock_alloc_base that returns a physical address
      and then convert this address to the virtual one, use appropriate
      memblock function that returns a virtual address.
      
      There is a small functional change in the allocation of then
      NODE_DATA().  Instead of panicing if the local allocation failed, the
      non-local allocation attempt will be made.
      
      Link: http://lkml.kernel.org/r/1546248566-14910-4-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <michal.simek@xilinx.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stafford Horne <shorne@gmail.com>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      47f1e926
    • Mike Rapoport's avatar
      microblaze: prefer memblock API returning virtual address · 3e5e79f2
      Mike Rapoport authored
      Rather than use the memblock_alloc_base that returns a physical address
      and then convert this address to the virtual one, use appropriate
      memblock function that returns a virtual address.
      
      Link: http://lkml.kernel.org/r/1546248566-14910-3-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Tested-by: default avatarMichal Simek <michal.simek@xilinx.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stafford Horne <shorne@gmail.com>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3e5e79f2
    • Mike Rapoport's avatar
      powerpc: prefer memblock APIs returning virtual address · f806714f
      Mike Rapoport authored
      Patch series "memblock: simplify several early memory allocation", v4.
      
      These patches simplify some of the early memory allocations by replacing
      usage of older memblock APIs with newer and shinier ones.
      
      Quite a few places in the arch/ code allocated memory using a memblock
      API that returns a physical address of the allocated area, then
      converted this physical address to a virtual one and then used memset(0)
      to clear the allocated range.
      
      More recent memblock APIs do all the three steps in one call and their
      usage simplifies the code.
      
      It's important to note that regardless of API used, the core allocation
      is nearly identical for any set of memblock allocators: first it tries
      to find a free memory with all the constraints specified by the caller
      and then falls back to the allocation with some or all constraints
      disabled.
      
      The first three patches perform the conversion of call sites that have
      exact requirements for the node and the possible memory range.
      
      The fourth patch is a bit one-off as it simplifies openrisc's
      implementation of pte_alloc_one_kernel(), and not only the memblock
      usage.
      
      The fifth patch takes care of simpler cases when the allocation can be
      satisfied with a simple call to memblock_alloc().
      
      The sixth patch removes one-liner wrappers for memblock_alloc on arm and
      unicore32, as suggested by Christoph.
      
      This patch (of 6):
      
      There are a several places that allocate memory using memblock APIs that
      return a physical address, convert the returned address to the virtual
      address and frequently also memset(0) the allocated range.
      
      Update these places to use memblock allocators already returning a
      virtual address.  Use memblock functions that clear the allocated memory
      instead of calling memset(0) where appropriate.
      
      The calls to memblock_alloc_base() that were not followed by memset(0)
      are replaced with memblock_alloc_try_nid_raw().  Since the latter does
      not panic() when the allocation fails, the appropriate panic() calls are
      added to the call sites.
      
      Link: http://lkml.kernel.org/r/1546248566-14910-2-git-send-email-rppt@linux.ibm.comSigned-off-by: default avatarMike Rapoport <rppt@linux.ibm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Guan Xuetao <gxt@pku.edu.cn>
      Cc: Greentime Hu <green.hu@gmail.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Michael Ellerman <mpe@ellerman.id.au>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Rich Felker <dalias@libc.org>
      Cc: Russell King <linux@armlinux.org.uk>
      Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
      Cc: Stafford Horne <shorne@gmail.com>
      Cc: Vincent Chen <deanbo422@gmail.com>
      Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
      Cc: Christoph Hellwig <hch@infradead.org>
      Cc: Michal Simek <michal.simek@xilinx.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f806714f
    • Dave Rodgman's avatar
      lib/lzo: separate lzo-rle from lzo · 45ec975e
      Dave Rodgman authored
      To prevent any issues with persistent data, separate lzo-rle from lzo so
      that it is treated as a separate algorithm, and lzo is still available.
      
      Link: http://lkml.kernel.org/r/20190205155944.16007-3-dave.rodgman@arm.comSigned-off-by: default avatarDave Rodgman <dave.rodgman@arm.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
      Cc: Matt Sealey <matt.sealey@arm.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Nitin Gupta <nitingupta910@gmail.com>
      Cc: Richard Purdie <rpurdie@openedhand.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Sonny Rao <sonnyrao@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      45ec975e
    • Dave Rodgman's avatar
      lib/lzo: implement run-length encoding · 5ee4014a
      Dave Rodgman authored
      Patch series "lib/lzo: run-length encoding support", v5.
      
      Following on from the previous lzo-rle patchset:
      
        https://lkml.org/lkml/2018/11/30/972
      
      This patchset contains only the RLE patches, and should be applied on
      top of the non-RLE patches ( https://lkml.org/lkml/2019/2/5/366 ).
      
      Previously, some questions were raised around the RLE patches.  I've
      done some additional benchmarking to answer these questions.  In short:
      
       - RLE offers significant additional performance (data-dependent)
      
       - I didn't measure any regressions that were clearly outside the noise
      
      One concern with this patchset was around performance - specifically,
      measuring RLE impact separately from Matt Sealey's patches (CTZ & fast
      copy).  I have done some additional benchmarking which I hope clarifies
      the benefits of each part of the patchset.
      
      Firstly, I've captured some memory via /dev/fmem from a Chromebook with
      many tabs open which is starting to swap, and then split this into 4178
      4k pages.  I've excluded the all-zero pages (as zram does), and also the
      no-zero pages (which won't tell us anything about RLE performance).
      This should give a realistic test dataset for zram.  What I found was
      that the data is VERY bimodal: 44% of pages in this dataset contain 5%
      or fewer zeros, and 44% contain over 90% zeros (30% if you include the
      no-zero pages).  This supports the idea of special-casing zeros in zram.
      
      Next, I've benchmarked four variants of lzo on these pages (on 64-bit
      Arm at max frequency): baseline LZO; baseline + Matt Sealey's patches
      (aka MS); baseline + RLE only; baseline + MS + RLE.  Numbers are for
      weighted roundtrip throughput (the weighting reflects that zram does
      more compression than decompression).
      
        https://drive.google.com/file/d/1VLtLjRVxgUNuWFOxaGPwJYhl_hMQXpHe/view?usp=sharing
      
      Matt's patches help in all cases for Arm (and no effect on Intel), as
      expected.
      
      RLE also behaves as expected: with few zeros present, it makes no
      difference; above ~75%, it gives a good improvement (50 - 300 MB/s on
      top of the benefit from Matt's patches).
      
      Best performance is seen with both MS and RLE patches.
      
      Finally, I have benchmarked the same dataset on an x86-64 device.  Here,
      the MS patches make no difference (as expected); RLE helps, similarly as
      on Arm.  There were no definite regressions; allowing for observational
      error, 0.1% (3/4178) of cases had a regression > 1 standard deviation,
      of which the largest was 4.6% (1.2 standard deviations).  I think this
      is probably within the noise.
      
        https://drive.google.com/file/d/1xCUVwmiGD0heEMx5gcVEmLBI4eLaageV/view?usp=sharing
      
      One point to note is that the graphs show RLE appears to help very
      slightly with no zeros present! This is because the extra code causes
      the clang optimiser to change code layout in a way that happens to have
      a significant benefit.  Taking baseline LZO and adding a do-nothing line
      like "__builtin_prefetch(out_len);" immediately before the "goto next"
      has the same effect.  So this is a real, but basically spurious effect -
      it's small enough not to upset the overall findings.
      
      This patch (of 3):
      
      When using zram, we frequently encounter long runs of zero bytes.  This
      adds a special case which identifies runs of zeros and encodes them
      using run-length encoding.
      
      This is faster for both compression and decompresion.  For high-entropy
      data which doesn't hit this case, impact is minimal.
      
      Compression ratio is within a few percent in all cases.
      
      This modifies the bitstream in a way which is backwards compatible
      (i.e., we can decompress old bitstreams, but old versions of lzo cannot
      decompress new bitstreams).
      
      Link: http://lkml.kernel.org/r/20190205155944.16007-2-dave.rodgman@arm.comSigned-off-by: default avatarDave Rodgman <dave.rodgman@arm.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
      Cc: Matt Sealey <matt.sealey@arm.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Nitin Gupta <nitingupta910@gmail.com>
      Cc: Richard Purdie <rpurdie@openedhand.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Sonny Rao <sonnyrao@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5ee4014a
    • Matt Sealey's avatar
      lib/lzo: fast 8-byte copy on arm64 · 761b3238
      Matt Sealey authored
      Enable faster 8-byte copies on arm64.
      
      Link: http://lkml.kernel.org/r/20181127161913.23863-6-dave.rodgman@arm.com
      Link: http://lkml.kernel.org/r/20190205141950.9058-4-dave.rodgman@arm.comSigned-off-by: default avatarMatt Sealey <matt.sealey@arm.com>
      Signed-off-by: default avatarDave Rodgman <dave.rodgman@arm.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Nitin Gupta <nitingupta910@gmail.com>
      Cc: Richard Purdie <rpurdie@openedhand.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Sonny Rao <sonnyrao@google.com>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      761b3238
    • Matt Sealey's avatar
      lib/lzo: 64-bit CTZ on arm64 · 433b3b3d
      Matt Sealey authored
      LZO leaves some performance on the table by not realising that arm64 can
      optimize count-trailing-zeros bit operations.
      
      Add CONFIG_ARM64 to the checked definitions alongside CONFIG_X86_64 to
      enable the use of rbit/clz instructions on full 64-bit quantities.
      
      Link: http://lkml.kernel.org/r/20181127161913.23863-5-dave.rodgman@arm.com
      Link: http://lkml.kernel.org/r/20190205141950.9058-3-dave.rodgman@arm.comSigned-off-by: default avatarMatt Sealey <matt.sealey@arm.com>
      Signed-off-by: default avatarDave Rodgman <dave.rodgman@arm.com>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Nitin Gupta <nitingupta910@gmail.com>
      Cc: Richard Purdie <rpurdie@openedhand.com>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Sonny Rao <sonnyrao@google.com>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      433b3b3d
    • Dave Rodgman's avatar
      lib/lzo: tidy-up ifdefs · 95777591
      Dave Rodgman authored
      Patch series "lib/lzo: performance improvements", v5.
      
      This patch (of 3):
      
      Modify the ifdefs in lzodefs.h to be more consistent with normal kernel
      macros (e.g., change __aarch64__ to CONFIG_ARM64).
      
      Link: http://lkml.kernel.org/r/20190205141950.9058-2-dave.rodgman@arm.comSigned-off-by: default avatarDave Rodgman <dave.rodgman@arm.com>
      Cc: Herbert Xu <herbert@gondor.apana.org.au>
      Cc: David S. Miller <davem@davemloft.net>
      Cc: Nitin Gupta <nitingupta910@gmail.com>
      Cc: Richard Purdie <rpurdie@openedhand.com>
      Cc: Markus F.X.J. Oberhumer <markus@oberhumer.com>
      Cc: Minchan Kim <minchan@kernel.org>
      Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
      Cc: Sonny Rao <sonnyrao@google.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Matt Sealey <matt.sealey@arm.com>
      Cc: Stephen Rothwell <sfr@canb.auug.org.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      95777591
    • Gustavo A. R. Silva's avatar
      ipc/sem.c: replace kvmalloc/memset with kvzalloc and use struct_size · 4a2ae929
      Gustavo A. R. Silva authored
      Use kvzalloc() instead of kvmalloc() and memset().
      
      Also, make use of the struct_size() helper instead of the open-coded
      version in order to avoid any potential type mistakes.
      
      This code was detected with the help of Coccinelle.
      
      Link: http://lkml.kernel.org/r/20190131214221.GA28930@embeddedorSigned-off-by: default avatarGustavo A. R. Silva <gustavo@embeddedor.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Cc: Davidlohr Bueso <dave@stgolabs.net>
      Cc: Manfred Spraul <manfred@colorfullife.com>
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4a2ae929
    • Mathieu Malaterre's avatar
      ipc: annotate implicit fall through · 667da6a2
      Mathieu Malaterre authored
      There is a plan to build the kernel with -Wimplicit-fallthrough and this
      place in the code produced a warning (W=1).
      
      This commit remove the following warning:
      
        ipc/sem.c:1683:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
      
      Link: http://lkml.kernel.org/r/20190114203608.18218-1-malat@debian.orgSigned-off-by: default avatarMathieu Malaterre <malat@debian.org>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      667da6a2
    • David Engraf's avatar
      init/initramfs.c: provide more details in error messages · e5eed351
      David Engraf authored
      Use distinct error messages when archive decompression failed.
      
      Link: http://lkml.kernel.org/r/20190212075635.7373-1-david.engraf@sysgo.comSigned-off-by: default avatarDavid Engraf <david.engraf@sysgo.com>
      Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Tested-by: default avatarAndy Shevchenko <andy.shevchenko@gmail.com>
      Cc: Dominik Brodowski <linux@dominikbrodowski.net>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Philippe Ombredanne <pombredanne@nexb.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e5eed351
    • Anders Roxell's avatar
      lib/ubsan: default UBSAN_ALIGNMENT to not set · 1a6a1dbe
      Anders Roxell authored
      When booting an allmodconfig kernel, there are a lot of false-positives.
      With a message like this 'UBSAN: Undefined behaviour in...' with a call
      trace that follows.
      
      UBSAN warnings are a result of enabling noisy CONFIG_UBSAN_ALIGNMENT
      which is disabled by default if HAVE_EFFICIENT_UNALIGNED_ACCESS=y.
      
      It's noisy even if don't have efficient unaligned access, e.g.  people
      often add __cacheline_aligned_in_smp in structs, but forget to align
      allocations of such struct (kmalloc() give 8-byte alignment in worst
      case).
      
      Rework so that when building a allmodconfig kernel that turns everything
      into '=m' or '=y' will turn off UBSAN_ALIGNMENT.
      
      [aryabinin@virtuozzo.com: changelog addition]
      Link: http://lkml.kernel.org/r/20181217150326.30933-1-anders.roxell@linaro.orgSigned-off-by: default avatarAnders Roxell <anders.roxell@linaro.org>
      Suggested-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1a6a1dbe
    • Jackie Liu's avatar
      scripts/gdb: replace flags (MS_xyz -> SB_xyz) · 663cb634
      Jackie Liu authored
      Since commit 1751e8a6 ("Rename superblock flags (MS_xyz ->
      SB_xyz)"), scripts/gdb should be updated to replace MS_xyz with SB_xyz.
      
      This change didn't directly affect the running operation of scripts/gdb
      until commit e262e32d "vfs: Suppress MS_* flag defs within the
      kernel unless explicitly enabled" removed the definitions used by
      constants.py.
      
      Update constants.py.in to utilise the new internal flags, matching the
      implementation at fs/proc_namespace.c::show_sb_opts.
      
      Note to stable, e262e32d landed in v5.0-rc1 (which was just
      released), so we'll want this picked back to 5.0 stable once this patch
      hits mainline (akpm just picked it up).  Without this, debugging a
      kernel a kernel via GDB+QEMU is broken in the 5.0 release.
      
      [kieran.bingham@ideasonboard.com: add fixes tag, reword commit message]
      Link: http://lkml.kernel.org/r/20190305103014.25847-1-kieran.bingham@ideasonboard.com
      Fixes: e262e32d "vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled"
      Signed-off-by: default avatarJackie Liu <liuyun01@kylinos.cn>
      Signed-off-by: default avatarKieran Bingham <kieran.bingham@ideasonboard.com>
      Tested-by: default avatarNick Desaulniers <ndesaulniers@google.com>
      Tested-by: default avatarKieran Bingham <kieran.bingham@ideasonboard.com>
      Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
      Cc: Dan Robertson <danlrobertson89@gmail.com>
      Cc: Jan Kiszka <jan.kiszka@siemens.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      663cb634
    • Elena Reshetova's avatar
      kcov: convert kcov.refcount to refcount_t · 39e07cb6
      Elena Reshetova authored
      atomic_t variables are currently used to implement reference
      counters with the following properties:
      
       - counter is initialized to 1 using atomic_set()
      
       - a resource is freed upon counter reaching zero
      
       - once counter reaches zero, its further
         increments aren't allowed
      
       - counter schema uses basic atomic operations
         (set, inc, inc_not_zero, dec_and_test, etc.)
      
      Such atomic variables should be converted to a newly provided refcount_t
      type and API that prevents accidental counter overflows and underflows.
      This is important since overflows and underflows can lead to
      use-after-free situation and be exploitable.
      
      The variable kcov.refcount is used as pure reference counter.  Convert
      it to refcount_t and fix up the operations.
      
      **Important note for maintainers:
      
      Some functions from refcount_t API defined in lib/refcount.c have
      different memory ordering guarantees than their atomic counterparts.
      
      The full comparison can be seen in https://lkml.org/lkml/2017/11/15/57
      and it is hopefully soon in state to be merged to the documentation
      tree.  Normally the differences should not matter since refcount_t
      provides enough guarantees to satisfy the refcounting use cases, but in
      some rare cases it might matter.  Please double check that you don't
      have some undocumented memory guarantees for this variable usage.
      
      For the kcov.refcount it might make a difference
      in following places:
       - kcov_put(): decrement in refcount_dec_and_test() only
         provides RELEASE ordering and control dependency on success
         vs. fully ordered atomic counterpart
      
      Link: http://lkml.kernel.org/r/1547634429-772-1-git-send-email-elena.reshetova@intel.comSigned-off-by: default avatarElena Reshetova <elena.reshetova@intel.com>
      Suggested-by: default avatarKees Cook <keescook@chromium.org>
      Reviewed-by: default avatarDavid Windsor <dwindsor@gmail.com>
      Reviewed-by: default avatarHans Liljestrand <ishkamiel@gmail.com>
      Reviewed-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Reviewed-by: default avatarAndrea Parri <andrea.parri@amarulasolutions.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      39e07cb6
    • Greg Kroah-Hartman's avatar
      kcov: no need to check return value of debugfs_create functions · ec9672d5
      Greg Kroah-Hartman authored
      When calling debugfs functions, there is no need to ever check the
      return value.  The function can work or not, but the code logic should
      never do something different based on this.
      
      Link: http://lkml.kernel.org/r/20190122152151.16139-46-gregkh@linuxfoundation.orgSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Mark Rutland <mark.rutland@arm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Anders Roxell <anders.roxell@linaro.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ec9672d5
    • Masahiro Yamada's avatar
      kernel/configs: use .incbin directive to embed config_data.gz · 13610aa9
      Masahiro Yamada authored
      This slightly optimizes the kernel/configs.c build.
      
      bin2c is not very efficient because it converts a data file into a huge
      array to embed it into a *.c file.
      
      Instead, we can use the .incbin directive.
      
      Also, this simplifies the code; Makefile is cleaner, and the way to get
      the offset/size of the config_data.gz is more straightforward.
      
      I used the "asm" statement in *.c instead of splitting it into *.S
      because MODULE_* tags are not supported in *.S files.
      
      I also cleaned up kernel/.gitignore; "config_data.gz" is unneeded
      because the top-level .gitignore takes care of the "*.gz" pattern.
      
      [yamada.masahiro@socionext.com: v2]
        Link: http://lkml.kernel.org/r/1550108893-21226-1-git-send-email-yamada.masahiro@socionext.com
      Link: http://lkml.kernel.org/r/1549941160-8084-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Cc: Randy Dunlap <rdunlap@infradead.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Alexander Popov <alex.popov@linux.com>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Dan Williams <dan.j.williams@intel.com>
      Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
      Cc: Richard Guy Briggs <rgb@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      13610aa9