- 16 Sep, 2020 14 commits
-
-
Alex Dewar authored
kmemdup() can be used instead of kmalloc()+memcpy(). Replace two occurrences of this pattern. Issue identified with Coccinelle. Link: https://lore.kernel.org/r/20200909185855.151964-1-alex.dewar90@gmail.comSigned-off-by:
Alex Dewar <alex.dewar90@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Matej Genci authored
VirtIO 1.0 spec says: The removed and rescan events ... when sent for LUN 0, they MAY apply to the entire target so the driver can ask the initiator to rescan the target to detect this. This change introduces the behaviour described above by scanning the entire SCSI target when LUN is set to 0. This is both a functional and a performance fix. It aligns the driver with the spec and allows control planes to hotplug targets with large numbers of LUNs without having to request a RESCAN for each one of them. Link: https://lore.kernel.org/r/CY4PR02MB33354370E0A81E75DD9DFE74FB520@CY4PR02MB3335.namprd02.prod.outlook.comSuggested-by:Felipe Franciosi <felipe@nutanix.com> Acked-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Matej Genci <matej.genci@nutanix.com> Signed-off-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/scsi/myrb.c:2229:27: warning: symbol 'myrb_template' was not declared. Should it be static? drivers/scsi/myrb.c:2318:31: warning: symbol 'myrb_raid_functions' was not declared. Should it be static? drivers/scsi/myrb.c:2492:6: warning: symbol 'myrb_err_status' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200915084018.2826922-1-yanaijie@huawei.comReported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/scsi/myrs.c:1532:5: warning: symbol 'myrs_host_reset' was not declared. Should it be static? drivers/scsi/myrs.c:1922:27: warning: symbol 'myrs_template' was not declared. Should it be static? drivers/scsi/myrs.c:2036:31: warning: symbol 'myrs_raid_functions' was not declared. Should it be static? drivers/scsi/myrs.c:2046:6: warning: symbol 'myrs_flush_cache' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200915084008.2826835-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/scsi/isci/phy.c:672:6: warning: symbol 'scu_link_layer_set_txcomsas_timeout' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200915084000.2826741-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:53:1: warning: symbol 'bnx2fc_global_lock' was not declared. Should it be static? drivers/scsi/bnx2fc/bnx2fc_fcoe.c:111:6: warning: symbol 'bnx2fc_devloss_tmo' was not declared. Should it be static? drivers/scsi/bnx2fc/bnx2fc_fcoe.c:116:6: warning: symbol 'bnx2fc_max_luns' was not declared. Should it be static? drivers/scsi/bnx2fc/bnx2fc_fcoe.c:121:6: warning: symbol 'bnx2fc_queue_depth' was not declared. Should it be static? drivers/scsi/bnx2fc/bnx2fc_fcoe.c:126:6: warning: symbol 'bnx2fc_log_fka' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033758.142601-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/scsi/isci/init.c:145:25: warning: symbol 'isci_host_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033741.142415-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This eliminates the following sparse warning: drivers/scsi/aacraid/aachba.c:245:5: warning: symbol 'aac_convert_sgl' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:293:5: warning: symbol 'acbsize' was not declared. Should it be static? drivers/scsi/aacraid/aachba.c:324:5: warning: symbol 'aac_wwn' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033749.142488-1-yanaijie@huawei.comReported-by:
-
Ye Bin authored
If (x_status & XE_PARITY_ERR) is true we set cam_status = DID_PARITY, othervise cam_status always ends up being DID_ERROR. Delete superfluous else-if statements. Link: https://lore.kernel.org/r/20200902061646.576966-1-yebin10@huawei.comSigned-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
-
Brian King authored
When a canister on a FS9100, or similar storage, running in NPIV mode, is rebooted, its WWPNs will fail over to another canister. When this occurs, we see a WWPN going away from the fabric at one N-Port ID, and, a short time later, the same WWPN appears at a different N-Port ID. When the canister is fully operational again, the WWPNs fail back to the original canister. If there is any I/O outstanding to the target when this occurs, it will result in the implicit logout the ibmvfc driver issues before removing the rport to fail. When the WWPN then shows up at a different N-Port ID, and we issue a PLOGI to it, the VIOS will see that it still has a login for this WWPN at the old N-Port ID, which results in the VIOS simulating a link down / link up sequence to the client, in order to get the VIOS and client LPAR in sync. The patch below improves the way we handle this scenario so as to avoid the link bounce, which affects all targets under the virtual host adapter. The change is to utilize the Move Login MAD, which will work even when I/O is outstanding to the target. The change only alters the target state machine for the case where the implicit logout fails prior to deleting the rport. If this implicit logout fails, we defer deleting the ibmvfc_target object after calling fc_remote_port_delete. This enables us to later retry the implicit logout after terminate_rport_io occurs, or to issue the Move Login request if a WWPN shows up at a new N-Port ID prior to this occurring. This has been tested by IBM's storage interoperability team on a FS9100, forcing the failover to occur. With debug tracing enabled in the ibmvfc driver, we confirmed the move login was sent in this scenario and confirmed the link bounce no longer occurred. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/1599859706-8505-1-git-send-email-brking@linux.vnet.ibm.comSigned-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
Damien Le Moal authored
Add missing Additional Sense Codes listed in http://www.t10.org/lists/asc-num.txt. Link: https://lore.kernel.org/r/20200910074843.217661-3-damien.lemoal@wdc.comReviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Damien Le Moal authored
No need for else after return. Link: https://lore.kernel.org/r/20200910074843.217661-2-damien.lemoal@wdc.comReviewed-by:
-
Xiongfeng Wang authored
The tcmu 'global_max_data_area_mb' parameter in sysfs is missing a newline. Add it. Link: https://lore.kernel.org/r/1599132573-33818-1-git-send-email-wangxiongfeng2@huawei.comSigned-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Daejun Park authored
Boot occasionally fails with some Samsung low-power UFS devices. The reason is that these devices have a little bit higher latency for NOP OUT responses. This causes boot to fail because the NOP OUT command is issued during initialization to check whether the device transport protocol is ready or not. Increase NOP_OUT_TIMEOUT value from 30 to 50ms. Link: https://lore.kernel.org/r/231786897.01599016081767.JavaMail.epsvc@epcpadp2Acked-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
Daejun Park <daejun7.park@samsung.com> Signed-off-by:
-
- 15 Sep, 2020 15 commits
-
-
Tomas Henzl authored
There is no need to compute modulo. A simple comparison is good enough. Link: https://lore.kernel.org/r/20200911180057.14633-1-thenzl@redhat.comAcked-by:
sreekanth reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Tomas Henzl authored
_base_process_reply_queue() called from _base_interrupt() may schedule a new irq poll. Fix this by calling synchronize_irq() first. Also ensure that enable_irq() is called only when necessary to avoid "Unbalanced enable for IRQ..." errors. Link: https://lore.kernel.org/r/20200910142126.8147-1-thenzl@redhat.com Fixes: 320e77ac ("scsi: mpt3sas: Irq poll to avoid CPU hard lockups") Acked-by:
-
Sreekanth Reddy authored
The driver will throw an error message when a tampered type controller is detected. The intent is to avoid interacting with any firmware which is not secured/signed by Broadcom. Any tampering on firmware component will be detected by hardware and it will be communicated to the driver to avoid any further interaction with that component. [mkp: switched back to dev_err] Link: https://lore.kernel.org/r/20200814130426.2741171-1-sreekanth.reddy@broadcom.comSigned-off-by:
-
Jason Yan authored
This addresses the following sparse warning: drivers/scsi/megaraid/megaraid_sas_base.c:80:5: warning: symbol 'smp_affinity_enable' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200915083948.2826598-1-yanaijie@huawei.comReported-by:
-
Jing Xiangfeng authored
The variable ret has been initialized with a value '0'. The assignment in switch-case is redundant. Remove it. Link: https://lore.kernel.org/r/20200914023207.113792-1-jingxiangfeng@huawei.comReviewed-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by:
-
Julian Wiedmann authored
While reviewing commit 936e6b85 ("scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action"), I stumbled over zfcp_fsf_req_complete() and wondered whether it has similar issues wrt concurrent modification of req->erp_action by zfcp_erp_strategy_check_fsfreq(). But a closer look shows that both its two callers [zfcp_fsf_reqid_check(), zfcp_fsf_req_dismiss_all()] remove the request from the adapter's req_list under the req_list's lock. Hence we can trust that if zfcp_erp_strategy_check_fsfreq() concurrently looks up the corresponding req_id, it won't find this request and is thus unable to modify it while it's being processed by zfcp_fsf_req_complete(). Add a code comment that hopefully makes this easier for future readers, and condense the two accesses to ->erp_action that made me trip over this code path in the first place. Link: https://lore.kernel.org/r/c500eac301fcbba5af942bbd200f2d6b14e46994.1599765652.git.bblock@linux.ibm.comReviewed-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Use the right helper to avoid poking around in the list's internals. Link: https://lore.kernel.org/r/ed669555c73aab95b29444c10066f492c0c43391.1599765652.git.bblock@linux.ibm.comReviewed-by:
-
YueHaibing authored
There is no caller in tree. Remove it. Link: https://lore.kernel.org/r/20200909135711.35728-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
drivers/scsi/libfc/fc_disc.c:304 fc_disc_error() warn: passing zero to 'PTR_ERR' fp may be NULL in fc_disc_error(), use PTR_ERR_OR_ZERO to handle this. Link: https://lore.kernel.org/r/20200909135432.36772-1-yuehaibing@huawei.comSigned-off-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/scsi/fnic/fnic_main.c:446:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200911091057.2938685-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/scsi/nsp32.c:1250:4-5: Unneeded semicolon drivers/scsi/nsp32.c:1842:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200911091049.2938158-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/scsi/sym53c8xx_2/sym_fw.c:372:3-4: Unneeded semicolon drivers/scsi/sym53c8xx_2/sym_fw.c:480:3-4: Unneeded semicolon drivers/scsi/sym53c8xx_2/sym_fw.c:536:2-3: Unneeded semicolon Link: https://lore.kernel.org/r/20200911091031.2937834-1-yanaijie@huawei.comReported-by:
-
Jason Yan authored
This addresses the following coccinelle warning: drivers/scsi/qla2xxx/qla_init.c:7112:5-9: Unneeded variable: "rval". Return "QLA_SUCCESS" on line 7115 Link: https://lore.kernel.org/r/20200911091021.2937708-1-yanaijie@huawei.comReported-by:
-
Adrian Hunter authored
Intel host controllers support the setting of latency tolerance. Accordingly, implement the PM QoS ->set_latency_tolerance() callback. The raw register values are also exposed via debugfs. Link: https://lore.kernel.org/r/20200827072030.24655-1-adrian.hunter@intel.com Fixes: 8c09d752 ("scsi: ufshdc-pci: Add Intel PCI IDs for EHL") Fixes: 1ab27c9c ("ufs: Add support for clock gating") Reviewed-by:
Stanley Chu <stanley.chu@mediatek.com> Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Martin K. Petersen authored
Resolve UFS discrepancies between fixes and queue. Signed-off-by:
-
- 10 Sep, 2020 11 commits
-
-
Ye Bin authored
This addresses the following gcc warning with "make W=1": not used [-Wunused-but-set-variable] struct lpfc_sli4_hdw_queue *qp; ^ Link: https://lore.kernel.org/r/20200909082716.37787-1-yebin10@huawei.comReported-by: -
Ye Bin authored
This addresses the following gcc warning with "make W=1": drivers/scsi/gdth.c: In function ‘gdth_async_event’: drivers/scsi/gdth.c:3010:9: warning: variable ‘cmd_index’ set but not used [-Wunused-but-set-variable] int cmd_index; Link: https://lore.kernel.org/r/20200909082627.101984-1-yebin10@huawei.comReported-by: -
Ye Bin authored
This addresses the following gcc warning with "make W=1": drivers/scsi/pmcraid.c: In function ‘pmcraid_abort_cmd’: drivers/scsi/pmcraid.c:2863:33: warning: variable ‘res’ set but not used [-Wunused-but-set-variable] struct pmcraid_resource_entry *res; ^ Link: https://lore.kernel.org/r/20200909082627.101984-2-yebin10@huawei.comReported-by: -
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/scsi/qla1280.c: In function ‘qla1280_status_entry’: drivers/scsi/qla1280.c:3607:28: warning: variable ‘lun’ set but not used [-Wunused-but-set-variable] 3607 | unsigned int bus, target, lun; | ^~~ drivers/scsi/qla1280.c:3607:20: warning: variable ‘target’ set but not used [-Wunused-but-set-variable] 3607 | unsigned int bus, target, lun; | ^~~~~~ drivers/scsi/qla1280.c:3607:15: warning: variable ‘bus’ set but not used [-Wunused-but-set-variable] 3607 | unsigned int bus, target, lun; | ^~~ Link: https://lore.kernel.org/r/20200907074518.2326360-5-yanaijie@huawei.comReported-by: -
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/scsi/qla1280.c: In function ‘qla1280_mailbox_command’: drivers/scsi/qla1280.c:2430:11: warning: variable ‘data’ set but not used [-Wunused-but-set-variable] 2430 | uint16_t data; | ^~~~ Link: https://lore.kernel.org/r/20200907074518.2326360-4-yanaijie@huawei.comReported-by: -
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/scsi/qla1280.c: In function ‘qla1280_nvram_config’: drivers/scsi/qla1280.c:2188:36: warning: variable ‘ddma_conf’ set but not used [-Wunused-but-set-variable] 2188 | uint16_t hwrev, cfg1, cdma_conf, ddma_conf; | ^~~~~~~~~ Link: https://lore.kernel.org/r/20200907074518.2326360-3-yanaijie@huawei.comReported-by: -
Jason Yan authored
This addresses the following gcc warning with "make W=1": drivers/scsi/qla1280.c: In function ‘qla1280_done’: drivers/scsi/qla1280.c:1244:19: warning: variable ‘lun’ set but not used [-Wunused-but-set-variable] 1244 | int bus, target, lun; | ^~~ Link: https://lore.kernel.org/r/20200907074518.2326360-2-yanaijie@huawei.comReported-by: -
Alim Akhtar authored
With !CONFIG_OF and SCSI_UFS_EXYNOS selected, the below warning is given: WARNING: unmet direct dependencies detected for PHY_SAMSUNG_UFS Depends on [n]: OF [=n] && (ARCH_EXYNOS || COMPILE_TEST [=y]) Selected by [y]: - SCSI_UFS_EXYNOS [=y] && SCSI_LOWLEVEL [=y] && SCSI [=y] && SCSI_UFSHCD_PLATFORM [=y] && (ARCH_EXYNOS || COMPILE_TEST [=y]) Fix it by removing PHY_SAMSUNG_UFS dependency. Link: https://lore.kernel.org/r/20200721172021.28922-1-alim.akhtar@samsung.comReported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by:
-
Jing Xiangfeng authored
Fix to return error code PTR_ERR() from the error handling case instead of 0. Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.comAcked-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Stanley Chu authored
Fix build warnings with make W=1 as below, 1. >> drivers/scsi/ufs/ufs-mediatek.c:116:22: warning: format '%d' expects >> argument of type 'int', but argument 4 has type 'long int' 2. CC [M] drivers/scsi/ufs/ufs-mediatek.o ../drivers/scsi/ufs/ufs-mediatek.c:749: error: Cannot parse struct or union! /** is used specifically with kernel-doc tool. As a quick fix by removing dubious /** in the comment block of struct ufs_hba_variant_ops ufs_hba_mtk_vops. Link: https://lore.kernel.org/r/20200910013756.11385-1-stanley.chu@mediatek.comSigned-off-by:
-
Daniel Wagner authored
It was observed on an ISP8324 16Gb HBA with fw=8.08.203 (d0d5) in a PowerPC64 machine that pkt->entry_type was MBX_IOCB_TYPE/0x39 with an sp->type SRB_SCSI_CMD which is invalid and should not be possible. Reading the entry_type from the crash dump shows the expected value of STATUS_TYPE/0x03 but the call trace shows that qla24xx_mbx_iocb_entry() is used. Add a check to verify for consistency and reset the HBA if an invalid state is reached. Obviously, this is only a workaround until the real problem is solved. Link: https://lore.kernel.org/r/20200908081516.8561-5-dwagner@suse.deReviewed-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
-
