An error occurred fetching the project authors.
- 18 Feb, 2019 3 commits
-
-
Stanislaw Gruszka authored
Since we now support mt76x2u feature to allow set mac address when creating interface in common code we can use it for mt76x2u. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Stanislaw Gruszka authored
Use vif_mask to count interfaces to allow to set mac address in HW if there is only one interface and report error if we create interface with wrong BSSID resulting in already used index. Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2019-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Fourth batch of iwlwifi patches intended for v5.1 * Work on the new debugging infrastructure continues; * FTM (Fine Timing Measurement) initiator and responder implementation; * Support for a new device family started; * Bump supported FW API to 46; * General bugfixes; * Other cleanups;
-
- 14 Feb, 2019 37 commits
-
-
Avraham Stern authored
AP interfaces still use some static TX queues (for probes, broadcast and multicast frames). These queues were not stopped correctly when the transport layer indicated the queue should be stopped. As a result, when flushing the queues, new frames from the overflow queue were tx'd, so the queues still had frames after flushing. This ended up in an assert since trying to remove a station with non-empty queues. Fix it by stopping the static queues correctly when required. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Shahar S Matityahu authored
Add IWL_FW_INI_APPLY_EARLY and IWL_FW_INI_APPLY_AFTER_ALIVE apply points to unified images. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Ilan Peer authored
When HW restart is requested but not started yet, commands would not be sent to the FW, and some function calls would return an error. In case of iwl_mvm_mac_sta_state() returning an error value when a station is removed can lead to an unneeded warning in __sta_info_destroy_part2(). Handle this by setting the return value to 0, in case HW restart is in progress. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Ilan Peer authored
When HW restart is requested but not started yet, commands would not be sent to the FW, and some function calls return an error. Such cases can trigger unneeded warning messages, e.g., in iwl_mvm_mac_sta_state() and iwl_mvm_bss_info_changed_station(). Handle a couple of these cases by also checking in the WARN_ON() condition that HW restart is not requested. Signed-off-by:
-
Shahar S Matityahu authored
The size of the buffer is IWL_FW_TRIGGER_ID_NUM - 1 which is equal to IWL_FW_TRIGGER_ID_HOST_CHANNEL_SWITCH_COMPLETE so if the driver receives this trigger, it will cause a buffer overflow. Solve this by increasing the buffer size by 1. Signed-off-by:
-
Emmanuel Grumbach authored
The spatial reuse 4 words fields are fetched from the HE-SIGA by the firmware and propagated to the driver through the Rx info. This is useful to populate the radiotap header. We were looking at the wrong place in the firmware data and got bogus values. Fix that. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: bdf180c8 ("iwlwifi: mvm: change PHY data RX for HE radiotap") Signed-off-by:
-
Shahar S Matityahu authored
Enable ignore consecutive trigger feature which allows to configure the driver to skip consecutive triggers from the same type. Signed-off-by:
-
Shahar S Matityahu authored
Fix several issues related to dump delay: 1. In legacy dump trigger, use stop_delay field instead of trig_dis_ms. 2. ini delay is messured in usec so align both ini and legacy to usec. 3. schedule_delayed_work receives the delay value in jiffies so translate the dump delay to jiffies. Signed-off-by:
-
Luca Coelho authored
We don't support A-step for some device combinations anymore. So change them to use B-step, renaming and reorganizing the config structures. Additionally, fix one device that was using the wrong configuration. Signed-off-by: -
Avraham Stern authored
Add debug prints for FTM results info. These prints are used by tests automation. Signed-off-by:
-
Johannes Berg authored
In HE-TB PPDUs (labeled HE-TRIG in radiotap), we were overwriting the data4.spatial_reuse_1 field with the spatial reuse data that the firmware gives us for SU/MU PPDUs. Fix that by moving that, we are already setting the data4.spatial_reuse_{1,2,3,4} fields in the TB PPDU case. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Fixes: 69f3ca8e ("iwlwifi: mvm: show more HE radiotap data for TB PPDUs") Signed-off-by:
-
Avraham Stern authored
The FTM new API uses API TLV bit 15. The driver mistakenly uses this bit for beacon filter API, although no TLV was assigned for the beacon filter API. For now, make beacon filter use bit 16 instead (not set by the fw anyway). Once a TLV is assigned to the beacon filter API it should be updated. Signed-off-by:
-
Ilan Peer authored
- The FW supports up to 4 concurrent scans, so adjust the definitions accordingly. - Only a single periodic scan is supported, so enforce it in the code. Signed-off-by:
-
Shahar S Matityahu authored
D3 debug data is disabled by default. Currently it is done by tampering the dump mask. Add an operation that will allow this to be changed without recompilation. Signed-off-by:
-
Shaul Triebitz authored
For AX210 devices, the periphry for forcing NMI has changed. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Shaul Triebitz authored
In AX210 family, UMAC periphery address space moved from 0xA00000 to 0xD00000. Signed-off-by:
-
Shaul Triebitz authored
Many periphery addresses have changed in AX210 devices. Until sorting out which peripheries should be dumped, skip that step for now. Signed-off-by:
-
Haim Dreyfuss authored
In low power modes, the chip clock source for platform integrated devices is 32kHz. It is generated internally and supplied by a crystal oscillator. However using a 32kHz sourced from crystal oscillator has high power penalty. There is an option to get an external 32kHz clock from the platform. Past experience shows that the reliability is platform dependent, i.e. on some platforms it works good and on other it doesn’t. Working from external clock will save 0.5 mW in sleep state, from overall 1.8mW that we have today, i.e. almost 30%. Each OEM can enable or disable the use of the external 32kHz clock by setting a BIOS configuration. In case the OEM configured to use 32kHz external clock the driver will pass this indication to the FW. Signed-off-by:
Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by:
-
Sara Sharon authored
When flushing TX queues no new TX should go into the system. However, in the following scenario we get TX: 1. Queues are stopped and there are packets in overflow queue 2. Station is removed and flush begins 3. Flush empties space, and reclaim path TXes SKB from overflow queue. Note that the fact the queues are stopped during the process doesn't matter - the packet will be TXed since the TX path doesn't care if TX queues are stopped or not, just if there is space in the queue, which there is, since we just freed a packet. A fix here is rather complicated, since the flow is very racy. Change code not to warn if we are TXing from overflow TX. In case there is TX from both overflow TX and TX path we will miss a warning we optimally had, but we can live with that. Make sure we don't return before overflow queue is empty, otherwise we will think queues are empty, but they will be refilled, resulting with assert. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Fixes: 3955525d ("iwlwifi: pcie: buffer packets to avoid overflowing Tx queues") Signed-off-by:
-
Johannes Berg authored
Start supporting API version 46 where applicable. Signed-off-by:
-
Sara Sharon authored
This is useful for automated tests. Signed-off-by:
-
Avraham Stern authored
iwl_mvm_te_clear_data() is called for cleanup in case sending the HOT_SPOT_CMD failed. However, in case sending the command caused a fw error and restart (e.g. if the command is not supported) then the te_data pointer may no longer be valid, which leads to a NULL pointer dereference. Fix it by checking that the te_data pointer is not NULL before dereferencing it. Signed-off-by:
-
Shaul Triebitz authored
Until supporting UHB (ultra high band) channels for devices AX210, do not fail if number of channels reported by firmware is greater than NL80211_MAX_SUPP_REG_RULES. The Driver in that case will use only the non-UHB channels. Signed-off-by:
-
Mordechay Goodstein authored
Add new API and TLV for the ability to send commands in the beginning and end of reset flow. The full flow of recovery is: 1. While loading FW, get address (from the TLV) of target buffer to read in case of reset 2. If an error/assert happens read the address data from step 1. 3. Reset the HW and load the FW. 4. Send the data read in step 2. 5. Add station keys 6. Send notification to FW that reset flow is done. The main use of the recovery flow is for support in PN/SN recovery when offloaded Signed-off-by:
Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by:
-
Shaul Triebitz authored
Add new device family AX210. Make the needed changes for this family. Signed-off-by:
-
Shahar S Matityahu authored
Trigger field ignore_default was changed to override_trig. The first byte of the field indicates the driver to override existing configuration or keep the previous one The second byte of the field indicated the driver to replace the regions of the previous trigger or to append new regions to it. Change the way the active triggers are maintained to support trigger override in different apply points. Do this by making a trigger that updates at runtime by the triggers that are being used in the different apply points. In case of an assert, the driver does not reconfigure the triggers and uses the old configuration which leads to undefined behavior. Solve this by clearing the triggers in assert recovery flow. Signed-off-by:
-
Shahar S Matityahu authored
TLV 54 holds umac debug related addresses. TLV 55 holds lmac debug related addresses. These TLVs aim to replace the alive notification data in the future. Parse and keep error table addresses received from the TLVs for both lmac and umac and use these addresses instead of the pointer received from alive notification. The feature supports only unified image. Signed-off-by:
-
Johannes Berg authored
We now no longer have any special code in iwl_mvm_pass_packet_to_mac80211(), so don't need to pass NO_PSDU packets through it. Stop doing so and clean up the code there. Signed-off-by:
-
Johannes Berg authored
Add support for FTM initiator, i.e. peer measurements with FTM if the firmware supports FTM. Additionally, add two defines we depend on in include/linux/ieee80211.h. Signed-off-by:
-
Johannes Berg authored
Add support for FTM responder for hardware/firmware combinations that advertise support for it. Signed-off-by:
-
Shahar S Matityahu authored
Implement monitor dram memory dump in the new dump mechanism. Signed-off-by:
-
Ido Yariv authored
WOWLAN images in unified firmwares should not be used, so don't require them to support wowlan. This will allow to reduce the firmware's file size. Signed-off-by:
Ido Yariv <idox.yariv@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
Implement monitor sram memory dump in the new dump mechanism. Signed-off-by:
-
Sara Sharon authored
Currently there is no way to debug RX/TX paths using prints without harming tpt. Add prints to debug RX allocation path. We can still get 1.9 gbps with those on. Signed-off-by:
-
Sara Sharon authored
Use IWL_DL_FW instead. This will free a bit for more needed prints in newer devices. Signed-off-by:
-
Sara Sharon authored
Allocator swaps the pending requests with 0 when it starts working. This means that relying on it n RX path to decide if to move to emergency is not always a good idea, since it may be zero, but there are still a lot of unallocated RBs in the system. Change allocator to decrement the pending requests on real time. It is more expensive since it accesses the atomic variable more times, but it gives the RX path a better idea of the system's status. Reported-by:
-
Luca Coelho authored
Start supporting API version 45 where applicable. Signed-off-by:
-
