- 13 Jun, 2019 1 commit
-
-
Vitaly Kuznetsov authored
Unfortunately, a couple of mistakes were made while implementing Enlightened VMCS support, in particular, wrong clean fields were used in copy_enlightened_to_vmcs12(): - exception_bitmap is covered by CONTROL_EXCPN; - vm_exit_controls/pin_based_vm_exec_control/secondary_vm_exec_control are covered by CONTROL_GRP1. Fixes: 945679e3 ("KVM: nVMX: add enlightened VMCS state") Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 31 May, 2019 2 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fixes - fix compilation for !CONFIG_PCI - fix the output of KVM_CAP_MAX_VCPU_ID
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-fixes-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fixes for 5.2 - Several bug fixes for the new XIVE-native code. - Replace kvm->lock by other mutexes in several places where we hold a vcpu mutex, to avoid lock order inversions. - Fix a lockdep warning on guest entry for radix-mode guests. - Fix a bug causing user-visible corruption of SPRG3 on the host.
-
- 30 May, 2019 6 commits
-
-
Suraj Jitindar Singh authored
The sprgs are a set of 4 general purpose sprs provided for software use. SPRG3 is special in that it can also be read from userspace. Thus it is used on linux to store the cpu and numa id of the process to speed up syscall access to this information. This register is overwritten with the guest value on kvm guest entry, and so needs to be restored on exit again. Thus restore the value on the guest exit path in kvmhv_p9_guest_entry(). Cc: stable@vger.kernel.org # v4.20+ Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
Commit 3309bec8 ("KVM: PPC: Book3S HV: Fix lockdep warning when entering the guest") moved calls to trace_hardirqs_{on,off} in the entry path used for HPT guests. Similar code exists in the new streamlined entry path used for radix guests on POWER9. This makes the same change there, so as to avoid lockdep warnings such as this: [ 228.686461] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled) [ 228.686480] WARNING: CPU: 116 PID: 3803 at ../kernel/locking/lockdep.c:4219 check_flags.part.23+0x21c/0x270 [ 228.686544] Modules linked in: vhost_net vhost xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat +xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter +ebtables ip6table_filter ip6_tables iptable_filter fuse kvm_hv kvm at24 ipmi_powernv regmap_i2c ipmi_devintf +uio_pdrv_genirq ofpart ipmi_msghandler uio powernv_flash mtd ibmpowernv opal_prd ip_tables ext4 mbcache jbd2 btrfs +zstd_decompress zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor +raid6_pq raid1 raid0 ses sd_mod enclosure scsi_transport_sas ast i2c_opal i2c_algo_bit drm_kms_helper syscopyarea +sysfillrect sysimgblt fb_sys_fops ttm drm i40e e1000e cxl aacraid tg3 drm_panel_orientation_quirks i2c_core [ 228.686859] CPU: 116 PID: 3803 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc1-xive+ #42 [ 228.686911] NIP: c0000000001b394c LR: c0000000001b3948 CTR: c000000000bfad20 [ 228.686963] REGS: c000200cdb50f570 TRAP: 0700 Not tainted (5.2.0-rc1-xive+) [ 228.687001] MSR: 9000000002823033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 48222222 XER: 20040000 [ 228.687060] CFAR: c000000000116db0 IRQMASK: 1 [ 228.687060] GPR00: c0000000001b3948 c000200cdb50f800 c0000000015e7600 000000000000002e [ 228.687060] GPR04: 0000000000000001 c0000000001c71a0 000000006e655f73 72727563284e4f5f [ 228.687060] GPR08: 0000200e60680000 0000000000000000 c000200cdb486180 0000000000000000 [ 228.687060] GPR12: 0000000000002000 c000200fff61a680 0000000000000000 00007fffb75c0000 [ 228.687060] GPR16: 0000000000000000 0000000000000000 c0000000017d6900 c000000001124900 [ 228.687060] GPR20: 0000000000000074 c008000006916f68 0000000000000074 0000000000000074 [ 228.687060] GPR24: ffffffffffffffff ffffffffffffffff 0000000000000003 c000200d4b600000 [ 228.687060] GPR28: c000000001627e58 c000000001489908 c000000001627e58 c000000002304de0 [ 228.687377] NIP [c0000000001b394c] check_flags.part.23+0x21c/0x270 [ 228.687415] LR [c0000000001b3948] check_flags.part.23+0x218/0x270 [ 228.687466] Call Trace: [ 228.687488] [c000200cdb50f800] [c0000000001b3948] check_flags.part.23+0x218/0x270 (unreliable) [ 228.687542] [c000200cdb50f870] [c0000000001b6548] lock_is_held_type+0x188/0x1c0 [ 228.687595] [c000200cdb50f8d0] [c0000000001d939c] rcu_read_lock_sched_held+0xdc/0x100 [ 228.687646] [c000200cdb50f900] [c0000000001dd704] rcu_note_context_switch+0x304/0x340 [ 228.687701] [c000200cdb50f940] [c0080000068fcc58] kvmhv_run_single_vcpu+0xdb0/0x1120 [kvm_hv] [ 228.687756] [c000200cdb50fa20] [c0080000068fd5b0] kvmppc_vcpu_run_hv+0x5e8/0xe40 [kvm_hv] [ 228.687816] [c000200cdb50faf0] [c0080000071797dc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 228.687863] [c000200cdb50fb10] [c0080000071755dc] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm] [ 228.687916] [c000200cdb50fba0] [c008000007165ccc] kvm_vcpu_ioctl+0x424/0x838 [kvm] [ 228.687957] [c000200cdb50fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0 [ 228.687995] [c000200cdb50fdb0] [c000000000434724] ksys_ioctl+0x104/0x120 [ 228.688033] [c000200cdb50fe00] [c000000000434768] sys_ioctl+0x28/0x80 [ 228.688072] [c000200cdb50fe20] [c00000000000b888] system_call+0x5c/0x70 [ 228.688109] Instruction dump: [ 228.688142] 4bf6342d 60000000 0fe00000 e8010080 7c0803a6 4bfffe60 3c82ff87 3c62ff87 [ 228.688196] 388472d0 3863d738 4bf63405 60000000 <0fe00000> 4bffff4c 3c82ff87 3c62ff87 [ 228.688251] irq event stamp: 205 [ 228.688287] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688344] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688412] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688464] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 [ 228.688513] ---[ end trace eb16f6260022a812 ]--- [ 228.688548] possible reason: unannotated irqs-off. [ 228.688571] irq event stamp: 205 [ 228.688607] hardirqs last enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv] [ 228.688664] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv] [ 228.688719] softirqs last enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4 [ 228.688758] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210 Cc: stable@vger.kernel.org # v4.20+ Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests") Signed-off-by:
Cédric Le Goater <clg@kaod.org> Tested-by:
-
Cédric Le Goater authored
Under XIVE, the ESB pages of an interrupt are used for interrupt management (EOI) and triggering. They are made available to guests through a mapping of the XIVE KVM device. When a device is passed-through, the passthru_irq helpers, kvmppc_xive_set_mapped() and kvmppc_xive_clr_mapped(), clear the ESB pages of the guest IRQ number being mapped and let the VM fault handler repopulate with the correct page. The ESB pages are mapped at offset 4 (KVM_XIVE_ESB_PAGE_OFFSET) in the KVM device mapping. Unfortunately, this offset was not taken into account when clearing the pages. This lead to issues with the passthrough devices for which the interrupts were not functional under some guest configuration (tg3 and single CPU) or in any configuration (e1000e adapter). Reviewed-by:
Greg Kurz <groug@kaod.org> Tested-by:
-
Cédric Le Goater authored
According to Documentation/virtual/kvm/locking.txt, the srcu read lock should be taken when accessing the memslots of the VM. The XIVE KVM device needs to do so when configuring the page of the OS event queue of vCPU for a given priority and when marking the same page dirty before migration. This avoids warnings such as : [ 208.224882] ============================= [ 208.224884] WARNING: suspicious RCU usage [ 208.224889] 5.2.0-rc2-xive+ #47 Not tainted [ 208.224890] ----------------------------- [ 208.224894] ../include/linux/kvm_host.h:633 suspicious rcu_dereference_check() usage! [ 208.224896] other info that might help us debug this: [ 208.224898] rcu_scheduler_active = 2, debug_locks = 1 [ 208.224901] no locks held by qemu-system-ppc/3923. [ 208.224902] stack backtrace: [ 208.224907] CPU: 64 PID: 3923 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc2-xive+ #47 [ 208.224909] Call Trace: [ 208.224918] [c000200cdd98fa30] [c000000000be1934] dump_stack+0xe8/0x164 (unreliable) [ 208.224924] [c000200cdd98fa80] [c0000000001aec80] lockdep_rcu_suspicious+0x110/0x180 [ 208.224935] [c000200cdd98fb00] [c0080000075933a0] gfn_to_memslot+0x1c8/0x200 [kvm] [ 208.224943] [c000200cdd98fb40] [c008000007599600] gfn_to_pfn+0x28/0x60 [kvm] [ 208.224951] [c000200cdd98fb70] [c008000007599658] gfn_to_page+0x20/0x40 [kvm] [ 208.224959] [c000200cdd98fb90] [c0080000075b495c] kvmppc_xive_native_set_attr+0x8b4/0x1480 [kvm] [ 208.224967] [c000200cdd98fca0] [c00800000759261c] kvm_device_ioctl_attr+0x64/0xb0 [kvm] [ 208.224974] [c000200cdd98fcf0] [c008000007592730] kvm_device_ioctl+0xc8/0x110 [kvm] [ 208.224979] [c000200cdd98fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0 [ 208.224981] [c000200cdd98fdb0] [c000000000434724] ksys_ioctl+0x104/0x120 [ 208.224984] [c000200cdd98fe00] [c000000000434768] sys_ioctl+0x28/0x80 [ 208.224988] [c000200cdd98fe20] [c00000000000b888] system_call+0x5c/0x70 legoater@boss01:~$ Fixes: 13ce3297 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration") Fixes: e6714bd1 ("KVM: PPC: Book3S HV: XIVE: Add a control to dirty the XIVE EQ pages") Signed-off-by: -
Cédric Le Goater authored
The passthrough interrupts are defined at the host level and their IRQ data should not be cleared unless specifically deconfigured (shutdown) by the host. They differ from the IPI interrupts which are allocated by the XIVE KVM device and reserved to the guest usage only. This fixes a host crash when destroying a VM in which a PCI adapter was passed-through. In this case, the interrupt is cleared and freed by the KVM device and then shutdown by vfio at the host level. [ 1007.360265] BUG: Kernel NULL pointer dereference at 0x00000d00 [ 1007.360285] Faulting instruction address: 0xc00000000009da34 [ 1007.360296] Oops: Kernel access of bad area, sig: 7 [#1] [ 1007.360303] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV [ 1007.360314] Modules linked in: vhost_net vhost iptable_mangle ipt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc kvm_hv kvm xt_tcpudp iptable_filter squashfs fuse binfmt_misc vmx_crypto ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi nfsd ip_tables x_tables autofs4 btrfs zstd_decompress zstd_compress lzo_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq multipath mlx5_ib ib_uverbs ib_core crc32c_vpmsum mlx5_core [ 1007.360425] CPU: 9 PID: 15576 Comm: CPU 18/KVM Kdump: loaded Not tainted 5.1.0-gad7e7d0ef #4 [ 1007.360454] NIP: c00000000009da34 LR: c00000000009e50c CTR: c00000000009e5d0 [ 1007.360482] REGS: c000007f24ccf330 TRAP: 0300 Not tainted (5.1.0-gad7e7d0ef) [ 1007.360500] MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24002484 XER: 00000000 [ 1007.360532] CFAR: c00000000009da10 DAR: 0000000000000d00 DSISR: 00080000 IRQMASK: 1 [ 1007.360532] GPR00: c00000000009e62c c000007f24ccf5c0 c000000001510600 c000007fe7f947c0 [ 1007.360532] GPR04: 0000000000000d00 0000000000000000 0000000000000000 c000005eff02d200 [ 1007.360532] GPR08: 0000000000400000 0000000000000000 0000000000000000 fffffffffffffffd [ 1007.360532] GPR12: c00000000009e5d0 c000007fffff7b00 0000000000000031 000000012c345718 [ 1007.360532] GPR16: 0000000000000000 0000000000000008 0000000000418004 0000000000040100 [ 1007.360532] GPR20: 0000000000000000 0000000008430000 00000000003c0000 0000000000000027 [ 1007.360532] GPR24: 00000000000000ff 0000000000000000 00000000000000ff c000007faa90d98c [ 1007.360532] GPR28: c000007faa90da40 00000000000fe040 ffffffffffffffff c000007fe7f947c0 [ 1007.360689] NIP [c00000000009da34] xive_esb_read+0x34/0x120 [ 1007.360706] LR [c00000000009e50c] xive_do_source_set_mask.part.0+0x2c/0x50 [ 1007.360732] Call Trace: [ 1007.360738] [c000007f24ccf5c0] [c000000000a6383c] snooze_loop+0x15c/0x270 (unreliable) [ 1007.360775] [c000007f24ccf5f0] [c00000000009e62c] xive_irq_shutdown+0x5c/0xe0 [ 1007.360795] [c000007f24ccf630] [c00000000019e4a0] irq_shutdown+0x60/0xe0 [ 1007.360813] [c000007f24ccf660] [c000000000198c44] __free_irq+0x3a4/0x420 [ 1007.360831] [c000007f24ccf700] [c000000000198dc8] free_irq+0x78/0xe0 [ 1007.360849] [c000007f24ccf730] [c00000000096c5a8] vfio_msi_set_vector_signal+0xa8/0x350 [ 1007.360878] [c000007f24ccf7f0] [c00000000096c938] vfio_msi_set_block+0xe8/0x1e0 [ 1007.360899] [c000007f24ccf850] [c00000000096cae0] vfio_msi_disable+0xb0/0x110 [ 1007.360912] [c000007f24ccf8a0] [c00000000096cd04] vfio_pci_set_msi_trigger+0x1c4/0x3d0 [ 1007.360922] [c000007f24ccf910] [c00000000096d910] vfio_pci_set_irqs_ioctl+0xa0/0x170 [ 1007.360941] [c000007f24ccf930] [c00000000096b400] vfio_pci_disable+0x80/0x5e0 [ 1007.360963] [c000007f24ccfa10] [c00000000096b9bc] vfio_pci_release+0x5c/0x90 [ 1007.360991] [c000007f24ccfa40] [c000000000963a9c] vfio_device_fops_release+0x3c/0x70 [ 1007.361012] [c000007f24ccfa70] [c0000000003b5668] __fput+0xc8/0x2b0 [ 1007.361040] [c000007f24ccfac0] [c0000000001409b0] task_work_run+0x140/0x1b0 [ 1007.361059] [c000007f24ccfb20] [c000000000118f8c] do_exit+0x3ac/0xd00 [ 1007.361076] [c000007f24ccfc00] [c0000000001199b0] do_group_exit+0x60/0x100 [ 1007.361094] [c000007f24ccfc40] [c00000000012b514] get_signal+0x1a4/0x8f0 [ 1007.361112] [c000007f24ccfd30] [c000000000021cc8] do_notify_resume+0x1a8/0x430 [ 1007.361141] [c000007f24ccfe20] [c00000000000e444] ret_from_except_lite+0x70/0x74 [ 1007.361159] Instruction dump: [ 1007.361175] 38422c00 e9230000 712a0004 41820010 548a2036 7d442378 78840020 71290020 [ 1007.361194] 4082004c e9230010 7c892214 7c0004ac <e9240000> 0c090000 4c00012c 792a0022 Cc: stable@vger.kernel.org # v4.12+ Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller") Signed-off-by:
-
Cédric Le Goater authored
The XICS-on-XIVE KVM device needs to allocate XIVE event queues when a priority is used by the OS. This is referred as EQ provisioning and it is done under the hood when : 1. a CPU is hot-plugged in the VM 2. the "set-xive" is called at VM startup 3. sources are restored at VM restore The kvm->lock mutex is used to protect the different XIVE structures being modified but in some contexts, kvm->lock is taken under the vcpu->mutex which is not permitted by the KVM locking rules. Introduce a new mutex 'lock' for the KVM devices for them to synchronize accesses to the XIVE device structures. Reviewed-by:
-
- 29 May, 2019 7 commits
-
-
Cédric Le Goater authored
When a vCPU is connected to the KVM device, it is done using its vCPU identifier in the guest. Fix the enforced limit on the vCPU identifier by taking into account the SMT mode. Reported-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Tested-by:
-
Cédric Le Goater authored
When a CPU is hot-unplugged, the EQ is deconfigured using a zero size and a zero address. In this case, there is no need to check the flag and queue size validity. Move the checks after the queue reset code section to fix CPU hot-unplug. Reported-by:
-
Cédric Le Goater authored
Improve the release of the XIVE KVM device by clearing the file address_space, which is used to unmap the interrupt ESB pages when a device is passed-through. Suggested-by:
-
Paul Mackerras authored
Currently the HV KVM code takes the kvm->lock around calls to kvm_for_each_vcpu() and kvm_get_vcpu_by_id() (which can call kvm_for_each_vcpu() internally). However, that leads to a lock order inversion problem, because these are called in contexts where the vcpu mutex is held, but the vcpu mutexes nest within kvm->lock according to Documentation/virtual/kvm/locking.txt. Hence there is a possibility of deadlock. To fix this, we simply don't take the kvm->lock mutex around these calls. This is safe because the implementations of kvm_for_each_vcpu() and kvm_get_vcpu_by_id() have been designed to be able to be called locklessly. Signed-off-by:
-
Paul Mackerras authored
Currently the Book 3S KVM code uses kvm->lock to synchronize access to the kvm->arch.rtas_tokens list. Because this list is scanned inside kvmppc_rtas_hcall(), which is called with the vcpu mutex held, taking kvm->lock cause a lock inversion problem, which could lead to a deadlock. To fix this, we add a new mutex, kvm->arch.rtas_token_lock, which nests inside the vcpu mutexes, and use that instead of kvm->lock when accessing the rtas token list. This removes the lockdep_assert_held() in kvmppc_rtas_tokens_free(). At this point we don't hold the new mutex, but that is OK because kvmppc_rtas_tokens_free() is only called when the whole VM is being destroyed, and at that point nothing can be looking up a token in the list. Signed-off-by: -
Paul Mackerras authored
Currently the HV KVM code uses kvm->lock in conjunction with a flag, kvm->arch.mmu_ready, to synchronize MMU setup and hold off vcpu execution until the MMU-related data structures are ready. However, this means that kvm->lock is being taken inside vcpu->mutex, which is contrary to Documentation/virtual/kvm/locking.txt and results in lockdep warnings. To fix this, we add a new mutex, kvm->arch.mmu_setup_lock, which nests inside the vcpu mutexes, and is taken in the places where kvm->lock was taken that are related to MMU setup. Additionally we take the new mutex in the vcpu creation code at the point where we are creating a new vcore, in order to provide mutual exclusion with kvmppc_update_lpcr() and ensure that an update to kvm->arch.lpcr doesn't get missed, which could otherwise lead to a stale vcore->lpcr value. Signed-off-by: -
Paul Mackerras authored
Currently, kvmppc_xive_release() and kvmppc_xive_native_release() clear kvm->arch.mmu_ready and call kick_all_cpus_sync() as a way of ensuring that no vcpus are executing in the guest. However, future patches will change the mutex associated with kvm->arch.mmu_ready to a new mutex that nests inside the vcpu mutexes, making it difficult to continue to use this method. In fact, taking the vcpu mutex for a vcpu excludes execution of that vcpu, and we already take the vcpu mutex around the call to kvmppc_xive_[native_]cleanup_vcpu(). Once the cleanup function is done and we release the vcpu mutex, the vcpu can execute once again, but because we have cleared vcpu->arch.xive_vcpu, vcpu->arch.irq_type, vcpu->arch.xive_esc_vaddr and vcpu->arch.xive_esc_raddr, that vcpu will not be going into XIVE code any more. Thus, once we have cleaned up all of the vcpus, we are safe to clean up the rest of the XIVE state, and we don't need to use kvm->arch.mmu_ready to hold off vcpu execution. Signed-off-by:
-
- 28 May, 2019 2 commits
-
-
Thomas Huth authored
KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all architectures. However, on s390x, the amount of usable CPUs is determined during runtime - it is depending on the features of the machine the code is running on. Since we are using the vcpu_id as an index into the SCA structures that are defined by the hardware (see e.g. the sca_add_vcpu() function), it is not only the amount of CPUs that is limited by the hard- ware, but also the range of IDs that we can use. Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too. So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common code into the architecture specific code, and on s390x we have to return the same value here as for KVM_CAP_MAX_VCPUS. This problem has been discovered with the kvm_create_max_vcpus selftest. With this change applied, the selftest now passes on s390x, too. Reviewed-by:
Andrew Jones <drjones@redhat.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Thomas Huth <thuth@redhat.com> Message-Id: <20190523164309.13345-9-thuth@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Christian Borntraeger authored
We also need to fence the memunmap part. Fixes: e45adf66 ("KVM: Introduce a new guest mapping API") Fixes: d30b214d (kvm: fix compilation on s390) Cc: Michal Kubecek <mkubecek@suse.cz> Cc: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
-
- 26 May, 2019 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing warning fix from Steven Rostedt: "Make the GCC 9 warning for sub struct memset go away. GCC 9 now warns about calling memset() on partial structures when it goes across multiple fields. This adds a helper for the place in tracing that does this type of clearing of a structure" * tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Silence GCC 9 array bounds warning
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "The usual smattering of fixes and tunings that came in too late for the merge window, but should not wait four months before they appear in a release. I also travelled a bit more than usual in the first part of May, which didn't help with picking up patches and reports promptly" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits) KVM: x86: fix return value for reserved EFER tools/kvm_stat: fix fields filter for child events KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard kvm: selftests: aarch64: compile with warnings on kvm: selftests: aarch64: fix default vm mode kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION KVM: x86/pmu: do not mask the value that is written to fixed PMUs KVM: x86/pmu: mask the result of rdpmc according to the width of the counters x86/kvm/pmu: Set AMD's virt PMU version to 1 KVM: x86: do not spam dmesg with VMCS/VMCB dumps kvm: Check irqchip mode before assign irqfd kvm: svm/avic: fix off-by-one in checking host APIC ID KVM: selftests: do not blindly clobber registers in guest asm KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow kvm: vmx: Fix -Wmissing-prototypes warnings KVM: nVMX: Fix using __this_cpu_read() in preemptible context kvm: fix compilation on s390 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/randomLinus Torvalds authored
Pull /dev/random fix from Ted Ts'o: "Fix a soft lockup regression when reading from /dev/random in early boot" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: fix soft lockup when trying to read from an uninitialized blocking pool
-
Theodore Ts'o authored
Fixes: eb9d1bf0: "random: only read from /dev/random after its pool has received 128 bits" Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu>
-
Miguel Ojeda authored
Starting with GCC 9, -Warray-bounds detects cases when memset is called starting on a member of a struct but the size to be cleared ends up writing over further members. Such a call happens in the trace code to clear, at once, all members after and including `seq` on struct trace_iterator: In function 'memset', inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3: ./include/linux/string.h:344:9: warning: '__builtin_memset' offset [8505, 8560] from the object at 'iter' is out of the bounds of referenced subobject 'seq' with type 'struct trace_seq' at offset 4368 [-Warray-bounds] 344 | return __builtin_memset(p, c, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ In order to avoid GCC complaining about it, we compute the address ourselves by adding the offsetof distance instead of referring directly to the member. Since there are two places doing this clear (trace.c and trace_kdb.c), take the chance to move the workaround into a single place in the internal header. Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.comSigned-off-by:Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [ Removed unnecessary parenthesis around "iter" ] Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org>
-
- 25 May, 2019 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Bug fixes (including a regression fix) for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix dcache lookup of !casefolded directories ext4: do not delete unlinked inode from orphan list on failed truncate ext4: wait for outstanding dio during truncate in nojournal mode ext4: don't perform block validity checks on the journal inode
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: - Fix a regression that disabled device-mapper dax support - Remove unnecessary hardened-user-copy overhead (>30%) for dax read(2)/write(2). - Fix some compilation warnings. * tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead dax: Arrange for dax_supported check to span multiple devices libnvdimm: Fix compilation warnings with W=1
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Tom Zanussi sent me some small fixes and cleanups to the histogram code and I forgot to incorporate them. I also added a small clean up patch that was sent to me a while ago and I just noticed it" * tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: kernel/trace/trace.h: Remove duplicate header of trace_seq.h tracing: Add a check_val() check before updating cond_snapshot() track_val tracing: Check keys for variable references in expressions too tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
-
Gabriel Krisman Bertazi authored
Found by visual inspection, this wasn't caught by my xfstest, since it's effect is ignoring positive dentries in the cache the fallback just goes to the disk. it was introduced in the last iteration of the case-insensitive patch. d_compare should return 0 when the entries match, so make sure we are correctly comparing the entire string if the encoding feature is set and we are on a case-INsensitive directory. Fixes: b886ee3e ("ext4: Support case-insensitive file name lookups") Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is the same set of patches sent in the merge window as the final pull except that Martin's read only rework is replaced with a simple revert of the original change that caused the regression. Everything else is an obvious fix or small cleanup" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: Revert "scsi: sd: Keep disk read-only when re-reading partition" scsi: bnx2fc: fix incorrect cast to u64 on shift operation scsi: smartpqi: Reporting unhandled SCSI errors scsi: myrs: Fix uninitialized variable scsi: lpfc: Update lpfc version to 12.2.0.2 scsi: lpfc: add check for loss of ndlp when sending RRQ scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show scsi: lpfc: resolve lockdep warnings scsi: qedi: remove set but not used variables 'cdev' and 'udev' scsi: qedi: remove memset/memcpy to nfunc and use func instead scsi: qla2xxx: Add cleanup for PCI EEH recovery
-
- 24 May, 2019 11 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes from a few folks. - bio and sbitmap before atomic barrier fixes (Andrea) - Hang fix for blk-mq freeze and unfreeze (Bob) - Single segment count regression fix (Christoph) - AoE now has a new maintainer - tools/io_uring/ Makefile fix, and sync with liburing (me) * tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits) tools/io_uring: sync with liburing tools/io_uring: fix Makefile for pthread library link blk-mq: fix hang caused by freeze/unfreeze sequence block: remove the bi_seg_{front,back}_size fields in struct bio block: remove the segment size check in bio_will_gap block: force an unlimited segment size on queues with a virt boundary block: don't decrement nr_phys_segments for physically contigous segments sbitmap: fix improper use of smp_mb__before_atomic() bio: fix improper use of smp_mb__before_atomic() aoe: list new maintainer for aoe driver nvme-pci: use blk-mq mapping for unmanaged irqs nvme: update MAINTAINERS nvme: copy MTFA field from identify controller nvme: fix memory leak for power latency tolerance nvme: release namespace SRCU protection before performing controller ioctls nvme: merge nvme_ns_ioctl into nvme_ioctl nvme: remove the ifdef around nvme_nvm_ioctl nvme: fix srcu locking on error return in nvme_get_ns_from_disk nvme: Fix known effects nvme-pci: Sync queues on reset ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: - Two fixes to regressions introduced in kselftest Makefile test run output refactoring work (Kees Cook) - Adding Atom support to syscall_arg_fault test (Tong Bo) * tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/timers: Add missing fflush(stdout) calls selftests: Remove forced unbuffering for test running selftests/x86: Support Atom for syscall_arg_fault test
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull Devicetree fixes from Rob Herring: - Update checkpatch.pl to use DT vendor-prefixes.yaml - Fix DT binding references to files converted to DT schema - Clean-up Arm CPU binding examples to match schema - Add Sifive block versioning scheme documentation - Pass binding directory base to validation tools for reference lookups * tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: checkpatch.pl: Update DT vendor prefix check dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example dt-bindings: arm: Clean up CPU binding examples dt: fix refs that were renamed to json with the same file name dt-bindings: Pass binding directory to validation tools dt-bindings: sifive: describe sifive-blocks versioning
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pule more SPDX updates from Greg KH: "Here is another set of reviewed patches that adds SPDX tags to different kernel files, based on a set of rules that are being used to parse the comments to try to determine that the license of the file is "GPL-2.0-or-later". Only the "obvious" versions of these matches are included here, a number of "non-obvious" variants of text have been found but those have been postponed for later review and analysis. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers" * tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98 ...
-
Waiman Long authored
The kernel test robot has reported that the use of __this_cpu_add() causes bug messages like: BUG: using __this_cpu_add() in preemptible [00000000] code: ... Given the imprecise nature of the count and the possibility of resetting the count and doing the measurement again, this is not really a big problem to use the unprotected __this_cpu_*() functions. To make the preemption checking code happy, the this_cpu_*() functions will be used if CONFIG_DEBUG_PREEMPT is defined. The imprecise nature of the locking counts are also documented with the suggestion that we should run the measurement a few times with the counts reset in between to get a better picture of what is going on under the hood. Fixes: a8654596 ("locking/rwsem: Enable lock event counting") Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Commit 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes", 2019-04-02) introduced a "return false" in a function returning int, and anyway set_efer has a "nonzero on error" conventon so it should be returning 1. Reported-by:
Pavel Machek <pavel@denx.de> Fixes: 11988499 ("KVM: x86: Skip EFER vs. guest CPUID checks for host-initiated writes") Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Stefan Raspl authored
The fields filter would not work with child fields, as the respective parents would not be included. No parents displayed == no childs displayed. To reproduce, run on s390 (would work on other platforms, too, but would require a different filter name): - Run 'kvm_stat -d' - Press 'f' - Enter 'instruct' Notice that events like instruction_diag_44 or instruction_diag_500 are not displayed - the output remains empty. With this patch, we will filter by matching events and their parents. However, consider the following example where we filter by instruction_diag_44: kvm statistics - summary regex filter: instruction_diag_44 Event Total %Total CurAvg/s exit_instruction 276 100.0 12 instruction_diag_44 256 92.8 11 Total 276 12 Note that the parent ('exit_instruction') displays the total events, but the childs listed do not match its total (256 instead of 276). This is intended (since we're filtering all but one child), but might be confusing on first sight. Signed-off-by:Stefan Raspl <raspl@linux.ibm.com> Signed-off-by:
-
Thomas Huth authored
struct kvm_nested_state is only available on x86 so far. To be able to compile the code on other architectures as well, we need to wrap the related code with #ifdefs. Signed-off-by:
-
Andrew Jones authored
aarch64 fixups needed to compile with warnings as errors. Reviewed-by:
-
Andrew Jones authored
VM_MODE_P52V48_4K is not a valid mode for AArch64. Replace its use in vm_create_default() with a mode that works and represents a good AArch64 default. (We didn't ever see a problem with this because we don't have any unit tests using vm_create_default(), but it's good to get it fixed in advance.) Reported-by:
-
Andrew Jones authored
The memory slot size must be aligned to the host's page size. When testing a guest with a 4k page size on a host with a 64k page size, then 3 guest pages are not host page size aligned. Since we just need a nearly arbitrary number of extra pages to ensure the memslot is not aligned to a 64 host-page boundary for this test, then we can use 16, as that's 64k aligned, but not 64 * 64k aligned. Fixes: 76d58e0f ("KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size", 2019-04-17) Signed-off-by:
-
