- 10 Jan, 2011 1 commit
-
-
Alagu Sankar authored
This patch adds support for handling SDIO interrupt on DaVinci MMC/SD controller. The patch has been tested on DM355 and DA850 EVMs with Marvell Libertas based SDIO wireless LAN card. Signed-off-by:
Alagu Sankar <alagusankar@embwise.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Chris Ball <cjb@laptop.org>
-
- 09 Jan, 2011 38 commits
-
-
Linus Walleij authored
The card is not always clocked and the clock frequency zero is perfectly legal, thus this code in mmc_set_data_timeout() may cause a division by zero. It will be triggered more often if you're using software clock gating but can be triggered under other conditions too. Reported-by:
Pierre Tardy <tardyp@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@stericsson.com> Reviewed-by:
-
Arnd Hannemann authored
With current code card insert/eject interrupts will acknowledge outstanding commands. Normally this seems to be no problem, however if the hardware gets stuck and no interrupts for CMD_TIMEOUT or CMD_RESPEND are generated, then inserting and ejecting cards will falsely acknowledge outstanding commands from the core. This patch changes the behavior so that CMDs are only acked, if CMD_TIMEOUT or CMD_RESPEND is received. Signed-off-by:
Arnd Hannemann <arnd@arndnet.de> Signed-off-by:
-
Arnd Hannemann authored
When doing excessive hotplug, e.g., repeated insert/eject operations, the hardware may get confused to a point where no CMDTIMEOUT/CMDRESPEND interrupts are generated any more. As a result requests get stuck, e.g.: [ 360.351562] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 360.351562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.359375] kworker/u:0 D c020c2b4 0 5 2 0x00000000 [ 360.367187] Backtrace: [ 360.367187] [<c020bfb0>] (schedule+0x0/0x340) from [<c020c480>] (schedule_timeout+0x20/0x190) [ 360.375000] r8:c702fd70 r7:00000002 r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.375000] r3:c701e040 [ 360.382812] [<c020c460>] (schedule_timeout+0x0/0x190) from [<c020be78>] (wait_for_common+0xc4/0x150) [ 360.390625] r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.390625] [<c020bdb4>] (wait_for_common+0x0/0x150) from [<c020bfac>] (wait_for_completion+0x18/0x1c) [ 360.398437] [<c020bf94>] (wait_for_completion+0x0/0x1c) from [<c0185590>] (mmc_wait_for_req+0x214/0x234) [ 360.406250] [<c018537c>] (mmc_wait_for_req+0x0/0x234) from [<c01889d0>] (mmc_sd_switch+0xfc/0x114) [ 360.414062] r7:c702fe4c r6:c702fe20 r5:c7179800 r4:00fffff0 [ 360.421875] [<c01888d4>] (mmc_sd_switch+0x0/0x114) from [<c0187f70>] (mmc_sd_setup_card+0x260/0x384) [ 360.429687] [<c0187d10>] (mmc_sd_setup_card+0x0/0x384) from [<c01885e0>] (mmc_sd_init_card+0x13c/0x1e0) [ 360.437500] [<c01884a4>] (mmc_sd_init_card+0x0/0x1e0) from [<c01887a8>] (mmc_attach_sd+0x124/0x1a8) [ 360.445312] r8:c02db404 r7:ffffff92 r6:c702ff34 r5:c6007da8 r4:c6007c00 [ 360.453125] [<c0188684>] (mmc_attach_sd+0x0/0x1a8) from [<c0185140>] (mmc_rescan+0x248/0x2f0) [ 360.460937] r5:c6007da8 r4:c6007c00 [ 360.468750] [<c0184ef8>] (mmc_rescan+0x0/0x2f0) from [<c00467f0>] (process_one_work+0x1ec/0x318) [ 360.476562] r7:c6007da8 r6:00000000 r5:c710ec00 r4:c701bde0 [ 360.484375] [<c0046604>] (process_one_work+0x0/0x318) from [<c0047fb0>] (worker_thread+0x1b0/0x2cc) [ 360.492187] [<c0047e00>] (worker_thread+0x0/0x2cc) from [<c004b338>] (kthread+0x8c/0x94) [ 360.500000] [<c004b2ac>] (kthread+0x0/0x94) from [<c0037fc4>] (do_exit+0x0/0x590) [ 360.507812] r7:00000013 r6:c0037fc4 r5:c004b2ac r4:c7021f00 This patch addresses this problem by introducing timeouts for outstanding interrupts. If a hardware interrupt is missing, a soft reset will be performed to bring the hardware back to a working state. Tested with the SDHI hardware block in sh7372 / AP4EVB. Signed-off-by:
-
Arnd Hannemann authored
The SDHI Controller on SH-Mobile SoCs supports SDIO IRQ signalling. This patch advertises this fact to the tmio_mmc driver. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Arnd Hannemann authored
This patch implements SDIO IRQ support for mfds which announce the TMIO_MMC_SDIO_IRQ flag for tmio_mmc. If MMC_CAP_SDIO_IRQ is also set SDIO IRQ signalling is activated. Tested with a b43-based wireless SDIO card and sh_mobile_sdhi. Signed-off-by:
-
Guennadi Liakhovetski authored
The SDHI controller on SH-Mobile SoCs requires even buffer addresses, when used with DMA. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by:
-
Arnd Hannemann authored
with "mmc: tmio: implement a bounce buffer for unaligned DMA" gcc generates the following warnings: drivers/mmc/host/tmio_mmc.c:654:6: warning: 'ret' may be used uninitialized in this function drivers/mmc/host/tmio_mmc.c:730:6: warning: 'ret' may be used uninitialized in this function This patch fixes these by setting ret to -EINVAL in the affected code paths. Signed-off-by:
-
Guennadi Liakhovetski authored
For example, with SDIO WLAN cards, some transfers happen with buffers at odd addresses, whereas the SH-Mobile DMA engine requires even addresses for SDHI. This patch extends the tmio driver with a bounce buffer, that is used for single entry scatter-gather lists both for sending and receiving. If we ever encounter unaligned transfers with multi-element sg lists, this patch will have to be extended. For now it just falls back to PIO in this and other unsupported cases. Signed-off-by:
-
Guennadi Liakhovetski authored
drivers/mmc/host/tmio_mmc.h is only used by drivers/mmc/host/tmio_mmc.c, this needlessly complicates source-code handling. Signed-off-by:
-
Guennadi Liakhovetski authored
The easiest way to fall back to PIO, when a DMA descriptor allocation fails is to disable DMA on the controller but continue with the current request in PIO mode. This way tmio_mmc_start_dma() can become void, since it cannot be failing any more. The current version is also broken: it is testing a wrong pointer and thus failing to recognise, that a descriptor allocation wasn't successful. Signed-off-by:
-
Guennadi Liakhovetski authored
The driver is capable of handling multi-element sg lists in both PIO and DMA modes. In DMA mode this also allows to use the DMA sg capability more efficiently and almost doubles the throughput. Signed-off-by:
-
Viresh Kumar authored
This way, the probe function may register debugfs files if it wants to. This fixes a bug with mmc_test where mmc_test_register_file_test() is called before the card's debugfs dir exists, and so it fails. Signed-off-by:
Viresh Kumar <viresh.kumar@st.com> Tested-by:
-
Chris Ball authored
Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Chris Ball authored
Signed-off-by: -
Andy Ross authored
Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by:
Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by:
Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by:
-
Takashi Iwai authored
With the bus-width test patch, mmc_set_bus_width*() isn't called properly when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode. This patch fixes the regression by moving the call up before the cap test. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Will Newton authored
This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by:
Will Newton <will.newton@imgtec.com> Reviewed-by:
Matt Fleming <matt@console-pimps.org> Reviewed-by:
-
Olof Johansson authored
SDHCI driver for Tegra. This driver plugs in as a new variant of sdhci-pltfm, using the platform data structure passed in to specify the GPIOs to use for card detect, write protect and card power enablement. Original driver (of which only the header file is left): Signed-off-by:
Yvonne Yip <y@palm.com> The rest, which has been rewritten by now: Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Acked-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Olof Johansson authored
Some controllers misparse segment length 0 as being 0, not 65536. Add a quirk to deal with it. Signed-off-by:
-
Linus Walleij authored
Since we make sure the clock is enabled in the mmc_host_clk_exit() function we should expect a reference counter of 1, not 0. Signed-off-by:
-
Jeongbae Seo authored
This patch supports controllers with no internal clock divider in SDHCI, such as the s5pc210 board. The external clock divider can be used to make a proper clock because SDHCI doesn't support internal clock divider by itself. If external clock divider type is selected, some functions related to clock control will be overrided by other functions. The current clock control index is added to let you know which clock bus is used for SDHCI when overriding functions. Checking functions are added into sdhci_s3c_consider_clock, because the clock divider step is different from that of host controller. Signed-off-by:
Jeongbae Seo <jeongbae.seo@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Acked-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Jeongbae Seo authored
This patch adds support for additional host capabilities like SD/MMC high speed, SDHCI bus width, etc. Signed-off-by:
-
Takashi Iwai authored
Signed-off-by:
-
Aries Lee authored
Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by:
Aries Lee <arieslee@jmicron.com> Signed-off-by:
Philip Rakity <prakity@marvell.com> Tested-by:
-
Michal Miroslaw authored
In case of failure, mmc_attach_sdio() will power off the SD bus. Power it up and reinitialize before trying SD memory detection. Reported-by:
Sahitya Tummala <stummala@codeaurora.org> Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Reviewed-by:
-
Ohad Ben-Cohen authored
Upon system resume, SDIO core must reinitialize cards that were powered off during suspend. If the card had its power kept during suspend (and thus it is 'powered-resumed'), SDIO core performs only a limited reinitializing, mainly needed to make sure that the card wasn't removed/replaced. If a __nonremovable__ card is powered-resumed, we can safely skip the reinitializing phase. Note: 9b966aae (mmc: sdio: fully reconfigure oldcard on resume) removed the bus width reconfiguration since mmc_sdio_init_card already does it. It is brought back now in case mmc_sdio_init_card is skipped. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Ohad Ben-Cohen authored
Initial SDIO runtime PM implementation took a conservative approach of powering up cards (and fully reinitializing them) on system suspend, just before the suspend handlers of the relevant drivers were executed. To avoid redundant power and reinitialization cycles, this patch removes this behavior: if a card is already powered off when system suspend kicks in, it is left at that state. If a card is active when a system sleep starts, everything is straightforward and works exactly like before. But if the card was already suspended before the sleep began, then when the MMC core powers it back up on resume, its run-time PM status has to be updated to reflect the actual post-system sleep status. The technique to do that is borrowed from the I2C runtime PM implementation (for more info see Documentation/power/runtime_pm.txt). Signed-off-by:
-
Ohad Ben-Cohen authored
mmc_rescan() checks whether registered cards are still present before skipping them, by calling the bus-specific ->detect() handler. With buses that support runtime PM, the card may be powered off at this point, so they need to be powered on and fully reinitialized before ->detect() executes. This whole process is redundant with nonremovable cards; in those cases, we can safely skip calling ->detect() and implicitly assume its success. Signed-off-by:
-
Takashi Iwai authored
JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for SD, but MMC doesn't work with the low-voltage, resulting in an error at probing. This patch adds the support for multiple voltage mask per device type, so that SD works with 1.8V while MMC forces 3.3V. Here new ocr_avail_* fields for each device are introduced, so that the actual OCR mask is switched dynamically. Also, the restriction of low-voltage in core/sd.c is removed when the bit is allowed explicitly via ocr_avail_sd mask. This patch was rewritten from scratch based on Aries' original code. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Philip Rakity authored
More information should be shown when sdhci_dumpregs is called. Knowing the command is useful for debugging, and Capability 1 is useful for SD v3. Signed-off-by:
-
Linus Walleij authored
This patch modifies the MMC core code to optionally call the set_ios() operation on the driver with the clock frequency set to 0 (gate) after a grace period of at least 8 MCLK cycles, then restore it (ungate) before any new request. This gives the driver the option to shut down the MCI clock to the MMC/SD card when the clock frequency is 0, i.e. the core has stated that the MCI clock does not need to be generated. It is inspired by existing clock gating code found in the OMAP and Atmel drivers and brings this up to the host abstraction. Gating is performed before and after any MMC request. This patchset implements this for the MMCI/PL180 MMC/SD host controller, but it should be simple to switch OMAP/Atmel over to using this instead. mmc_set_{gated,ungated}() add variable protection to the state holders for the clock gating code. This is particularly important when ordinary .set_ios() calls would race with the .set_ios() call resulting from a delayed gate operation. Signed-off-by: -
Jennifer Li authored
This patch disables the broken ADMA on selected O2Micro devices. Signed-off-by:
Jennifer Li <Jennifer.li@o2micro.com> Reviewed-by:
-
Axel Lin authored
Remove release_resource() after release_mem_region(). Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
Alberto Panizzo authored
This also fixes the build problem introduced by my previous patch due to unhandled API changes introduced by commit: 99fc5131 (mmc: Move regulator handling closer to core) Signed-off-by:
Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by:
-
Alberto Panizzo authored
This implementation is based on the pxamci.c driver and it will be used to support the mx31_3ds machine. Signed-off-by:
-
Mike Rapoport authored
Signed-off-by:
-
Mike Rapoport authored
Implement an sdhci-pltfm driver for the controller found in the Marvell Dove SoC. Signed-off-by:
-
- 08 Jan, 2011 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplusLinus Torvalds authored
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/hfsplus: hfsplus: %L-to-%ll, macro correction, and remove unneeded braces hfsplus: spaces/indentation clean-up hfsplus: C99 comments clean-up hfsplus: over 80 character lines clean-up hfsplus: fix an artifact in ioctl flag checking hfsplus: flush disk caches in sync and fsync hfsplus: optimize fsync hfsplus: split up inode flags hfsplus: write up fsync for directories hfsplus: simplify fsync hfsplus: avoid useless work in hfsplus_sync_fs hfsplus: make sure sync writes out all metadata hfsplus: use raw bio access for partition tables hfsplus: use raw bio access for the volume headers hfsplus: always use hfsplus_sync_fs to write the volume header hfsplus: silence a few debug printks hfsplus: fix option parsing during remount Fix up conflicts due to VFS changes in fs/hfsplus/{hfsplus_fs.h,unicode.c}
-
