- 22 Oct, 2005 25 commits
-
-
Randolph Chung authored
Disable use of fpregs in pa_memcpy, and turn on the -mdisable-fpregs flag. Signed-off-by:
Randolph Chung <tausq@parisc-linux.org> Signed-off-by:
Kyle McMartin <kyle@parisc-linux.org>
-
Kyle McMartin authored
git commit 976ecd12 changed our locking characteristics, and put the onus of spin_lock_init on superio.c. Signed-off-by:
-
Grant Grundler authored
PA20 arch book (page 7-52 and 7-55) indicate a "sync" is required after the FDC "to enforce instruction ordering". And we want to make sure FIC is executed after FDC has retired. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
-
Grant Grundler authored
minor cleanup: qualify constant with "UL" Acked-by:
"Hmamouche, Youssef" <youssef@ece.utexas.edu> Signed-off-by:
-
Grant Grundler authored
2.6.12-rc4-pa3 s/__LP64__/CONFIG_64BIT/ and fixup config.h usage Signed-off-by:
-
Grant Grundler authored
2.6.12-rc1-pa6 use work queue in LED/LCD driver instead of tasklet. Main advantage is it allows use of msleep() in the led_LCD_driver to "atomically" perform two MMIO writes (CMD, then DATA). Lead to nice cleanup of the main led_work_func() and led_LCD_driver(). Kudos to David for being persistent. From: David Pye <dmp@davidmpye.dyndns.org> Signed-off-by:
-
Jens Axboe authored
add syscall entries for ioprio_set/get as per Jens Axboe. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Grant Grundler authored
Optimize ext2_find_next_zero_bit. Gives about 25% perf improvement with a rsync test with ext3. Signed-off-by:
James Bottomley <jejb@parisc-linux.org> Fixup bitops.h to use volatile for *_bit() ops Based on this email thread: http://marc.theaimsgroup.com/?t=108826637900003 In a nutshell: *_bit() want use of volatile. __*_bit() are "relaxed" and don't use spinlock or volatile. other minor changes: o replaces hweight64() macro with alias to generic_hweight64() (Joel Soete) o cleanup ext2* macros so (a) it's obvious what the XOR magic is about and (b) one version that works for both 32/64-bit. o replace 2 uses of CONFIG_64BIT with __LP64__. bitops.h used both. I think header files that might go to user space should use something userspace will know about (__LP64__). Signed-off-by:
-
Stuart Brady authored
update comment about CAFL_STRIDE Signed-off-by:
Stuart Brady <sdb@parisc-linux.org> Signed-off-by:
-
Kyle McMartin authored
Add support for changing unaligned trap behaviour on a per-thread basis. Signed-off-by: -
Randolph Chung authored
convert some bl calls to b,l or bv to use longer offsets Signed-off-by:
-
Stuart Brady authored
o Added a control for the input source (which can be either "line" or "mic") o Mute the speaker/line-out/headphone outputs by default. o Increased the buffer size from 10 pages to 16. Signed-off-by:
-
Randolph Chung authored
export profile_pc() symbol - oprofile needs it when built as a module. Signed-off-by:
-
Matthew Wilcox authored
Fix some whitespace issues Reorganise parisc_device probe routine to be a little less convoluted Use ->hpa.start instead of ->hpa Signed-off-by:
Matthew Wilcox <willy@parisc-linux.org> Signed-off-by:
-
Matthew Wilcox authored
Neaten up the CONFIG_PA20 ifdefs More merge fixes, this time for SMP Signed-off-by:
-
Grant Grundler authored
move pa_tlb_lock and it's primary consumers to tlb_flush.h Future step will be to move spinlock_t definition out of system.h. Signed-off-by:
-
Grant Grundler authored
2.6.12-rc4-pa3 : first pass at making sure use of RFI conforms to PA 2.0 arch pages F-4 and F-5, PA 1.1 Arch page 3-19 and 3-20. The discussion revolves around all the rules for clearing PSW Q-bit. The hard part is meeting all the rules for "relied upon translation". .align directive is used to guarantee the critical sequence ends more than 8 instructions (32 bytes) from the end of page. Signed-off-by:
-
Grant Grundler authored
add || STI_CONSOLE to some of the basic FONTs. May need to get at least one of them to default to "Y" for parisc. Signed-off-by:
-
Matthew Wilcox authored
Fix card-mode Dino crashes on 725 (and probably other Snake) systems. Dino was coming up in fatal mode after a warm reboot. Resetting Dino brings it out of fatal mode, so do that if the status register indicates we're in fatal mode. Since this was never observed on any later systems, I presume firmware does this for us on those. Signed-off-by:
-
Grant Grundler authored
revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by:
-
Grant Grundler authored
revert use of %%sr0 in fdc asm. Thanks to Joel Soete for pointing out this oversight. Signed-off-by:
-
Matthew Wilcox authored
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by:
-
Matthew Wilcox authored
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver names. Signed-off-by:
-
Matthew Wilcox authored
Fix parse_tree_node. much more needs to be done to fix this file. Signed-off-by:
Richard Hirst <rhirst@parisc-linux.org> Do a proper depth-first search returning parents before children, using the new klist infrastructure. Signed-off-by:
-
Chris Wright authored
Not sure how it slipped by, but here's a trivial typo fix for powernow. Signed-off-by:
Chris Wright <chrisw@osdl.org> [ It's "nurter" backwards.. Maybe we have a hillbilly The Shining fan? ] Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 21 Oct, 2005 11 commits
-
-
Roland McGrath authored
When I originally moved exit_itimers into __exit_signal, that was the only place where we could reliably know it was the last thread in the group dying, without races. Since then we've gotten the signal_struct.live counter, and do_exit can reliably do group-wide cleanup work. This patch moves the call to do_exit, where it's made without locks. This avoids the deadlock issues that the old __exit_signal code's comment talks about, and the one that Oleg found recently with process CPU timers. [ This replaces e03d13e9, which is why it was just reverted. ] Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Revert commit e03d13e9, to be replaced by a much nicer fix from Roland.
-
Dave Jones authored
AMD recently discovered that on some hardware, there is a race condition possible when a C-state change request goes onto the bus at the same time as a P-state change request. Both requests happen, but the southbridge hardware only acknowledges the C-state change. The PowerNow! driver is then stuck in a loop, waiting for the P-state change acknowledgement. The driver eventually times out, but can no longer perform P-state changes. It turns out the solution is to resend the P-state change, which the southbridge will acknowledge normally. Thanks to Johannes Winkelmann for reporting this and testing the fix. Signed-off-by:
Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
David Gibson authored
This fixes a stupid typo bug in the iSeries hash table code. When we place a hash PTE in the secondary bucket, instead of setting the SECONDARY flag bit, as we should, we (redundantly) set the VALID flag. This was introduced with the patch abolishing bitfields from the hash table code. Mea culpa, oops. It hasn't been noticed until now because in practice we don't hit the secondary bucket terribly often. Signed-off-by:
David Gibson <dwg@au1.ibm.com> Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
-
Dave Airlie authored
The wrong state emission routines were being called for G550, and consistent maps weren't correctly mapped... Signed-off-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Benjamin Herrenschmidt authored
While working on 64K pages, I found this little buglet in our update_mmu_cache() implementation. The code calls __hash_page() passing it an "access" parameter (the type of access that triggers the hash) containing the bits _PAGE_RW and _PAGE_USER of the linux PTE. The latter is useless in this case and the former is wrong. In fact, if we have a writeable PTE and we pass _PAGE_RW to hash_page(), it will set _PAGE_DIRTY (since we track dirty that way, by hash faulting !dirty) which is not what we want. In fact, the correct fix is to always pass 0. That means that only read-only or already dirty read write PTEs will be preloaded. The (hopefully rare) case of a non dirty read write PTE can't be preloaded this way, it will have to fault in hash_page on the actual access. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Paul Mackerras authored
This fixes a typo in the div128_by_32 function used in the timekeeping calculations on ppc64. If you look at the code it's quite obvious that we need (rb + c) rather than (rb + b). The "b" is clearly just a typo. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Eric Moore authored
This fixes handling of the phy identifiers in mptsas. Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> [ split it a pre-2.6.14 portion from Eric's bigger patch ] Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Russell King authored
Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
- 20 Oct, 2005 4 commits
-
-
Ben Dooks authored
Patch from Ben Dooks From: Guillaume Gourat <guillaume.gourat@nexvision.fr> Add MASK definitions for DCLK0 and DCLK1 Signed-off-by:
Guillaume Gourat <guillaume.gourat@nexvision.fr> Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks The current Simtec BAST nand area timings are a little too slow to be obtained by a 2410 running at 266MHz, so reduce the timings slightly to bring them into the acceptable range. Signed-off-by:
-
Ben Dooks authored
Patch from Ben Dooks Avoid the possiblity that if the board is using a 16.9334 or higher crystal with a high PLL multiplier, then the pll value could overflow the capability of an int. Also fix the value types of the intermediate variables to unsigned int. Rewrite of patch from Guillaume Gourat Signed-off-by:
-
Matt Reimer authored
Patch from Matt Reimer Adds an I2S platform_device for PXA. I2S is used to interface with sound chips on systems like iPAQ h1910/h2200/hx4700 and Asus 716. Signed-off-by: mreimer@vpop.net Signed-off-by:
-
