The name field of of_platform_driver is just copied into the
included device_driver.  By not overriding an already initialised
device_driver name, we can convert the drivers over time to stop using
the of_platform_driver name.

Also we were not copying the owner field from of_platform_driver, so do
the same with it.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added asm-sparc/irqflags.h and moved irq related code from system.h to it.
Renamed local_irq functions to raw_local_irq in irq.c.
Modified system.h to include linux/irqflags.h which includes asm/irqflags.h.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

This is the first step in adding IRQ-flags state tracing as outlined in
Documentation/irqflags-tracing.txt.  These changes should be harmless
because they just move things around and rename them.

The next step is making the lowlevel entry code modifications which
to be honest are beyond my capabilities at this point.

Boot tested on an ss20 running an SMP kernel.
Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Apply a consistent format to vmlinux.lds.
The file is now to some degree readable.

In addition move several labels inside the braces
such that they reflect the actual start address of a section.

Without this the label would not reflect if ld added alignment.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make vmlinux.lds almost readable.
When going through the file fixed the following:
- Use PAGE_SIZE as replacement for hardcoded 4096
- Moves label definitions inside {} to avoid ld alignment
  that may be added between label and section
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The support code is identical to the hypervisor sun4v stuff,
just replacing the hypervisor calls with register reads and
writes in the Fire controller.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch cleans up the driver a bit. It contains
coding style fixes (pointed by Lindent and checkpatch)
and white space clean ups.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds accelerated copyarea and sets READS_FAST flag.
This doubles scrolling speed on SparcStation20 85MHz.

It also fixes a comment in cg6_fillrect function.
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch:
- corrects coding style errors pointed by Lindent and checkpatch
- replaces space chunks with tabs
- removes one redundant include
- improves indentations of defines
- removes from comments leftovers from skeletonfb
- adds __devinit attribute to two init functions
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  mlx4_core: Fix infinite loop on device initialization

The i2c-nforce2 driver has SMBus PEC support, so it should say so.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This patch is to add an abort function that will bring back the MCP51/55
controller if it was blocked by a block-read operation, in particular.
(When a slave sends a wrong byte count on a byte read, the host gets
locked up). I've only tested it on an MCP51 and MCP55. However, I'm
almost certain it will also work on MCP65, I just did not have the board
to test it on. Thus for now the abort function will only be called
if an MCP51/55 was detected.
Signed-off-by: Oleg Ryjkov <olegr@olegr.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This is the first part of the patch that adds a function to reset the
nvidia MCP51/55 i2c controller, if something bad happens to it (e.g.
a slave sends a wrong byte count during a block transaction).

This patch just adds nforce2_check_status function. It was originally
written by Hans-Frieder Vogt.

The reason that I'm the one sending it is:
- I relied on it for the second part of the patch,
- It makes the driver code cleaner/better.
Signed-off-by: Oleg Ryjkov <olegr@olegr.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fix a "mis-used register" problem on the AMD MIPS Alchemy au1550
I2C interface.

In summary, the programmable serial controller seems to hang the kernel
when I send a single 'address' byte on the I2C bus.  The patch
essentially uses the PSC_SMBSTAT register's TE (transmit FIFO empty)
bit to check when the transmit FIFO is empty, instead of using the
PSC_SMBEVNT register's TU (transmit underflow) bit.  Using the TE bit
fixed the hang problem.
Signed-off-by: Chris David <cd@chrisdavid.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Rename I2C_FUNC_SMBUS_HWPEC_CALC as I2C_FUNC_SMBUS_PEC, and list that
functionality as always available through the software implementation.
Update documentation accordingly (and list similar requirements).

The way it's currently packaged doesn't present the capability in a
useful way.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Mark the i2c-at91 driver BROKEN in Kconfig, and explain just
why it's broken.  (Summary:  hardware design issues.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Move the i2c-dev support into <linux/i2c-dev.h> where it should always
have lived.  Now <linux/i2c.h> no longer holds stuff related to the
optional userspace /dev/i2c-X interface.  Improve the descriptions
for these ioctl requests.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This removes:

 - An effectively unused hook:  i2c_algorithm.algo_control.

 - The i2c_control() call, used only by i2c-dev to call that
   unused hook or set two barely supported adapter params.

   (That param setting moves into i2c-dev.c ... still iffy
   due to lack of locking, but no other changes.)

As shown by diffstat, this is a net code shrink.  It also reduces the
complexity of the I2C adapter and /dev interfaces.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c_algorithm.algo_control is about to be removed.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>

This removes NOP implementations of i2c_algorithm.algo_control.

With this change, there are no implementations of this hook in
the kernel.org tree ... that hook seems about ripe to remove.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The I2C_M_RECV_LEN calling convention for i2c_mesg.flags involves
playing games with reported buffer lengths.  (They start out less
than their actual size, and the length is then modified to reflect
how many bytes were delivered ... which one hopes is less than the
presumed actual size.)  Refuse to play such error prone games across
the boundary between userspace and kernel.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add support for multiple chips to i2c-stub. I've changed the memory
allocation scheme from static to dynamic, so that we don't waste too
much memory.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mark M. Hoffman <mhoffman@lightlink.com>

Remove this unneeded mutex. Indeed it was used to serialize access to
the hardware, but this is already done by the i2c-core layer, see
'bus_lock' mutex used by i2c_transfer().
Signed-off-by: Francis Moreau <francis.moro@gmail.com>
Acked-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add the Intel Tolapai SMBus Controller DID.
Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Clarify use of the I2C_M_* flags by highlighting the fact that
most of them depend on I2C_FUNC_PROTOCOL_MANGLING.

Also provide kerneldoc for i2c_smbus_read_block_data() and also
for "struct i2c_msg".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Do not initialize the PCF8574 with an arbitrary value. Users will have
to write the initial value to sysfs themselves.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Acked-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Use i2c_bit_add_numbered_adapter() if device id specified, so that the
i2c-ibm_iic adapter works well with new-style pre-declared devices.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Switch the tps65010 driver into a "new-style" I2C driver, and convert all
of its in-tree users (board support for OSK, H2, H3) accordingly.

That accounts for most of the board-specific code in this driver; the
rest of that code is now moved into board-specific initcalls.

Also remove some of the many now-superfluous #includes.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Prepare to convert tps65010 driver to "new style" driver by changing
how it references the i2c_client.  This lets the eventual patch with
driver and platform updates be smaller.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

After the i2c-isa removal some code can become static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

We need to be able to flag I2C devices, such as RTCs, which can issue wake
events (usually through IRQ lines).  This adds an i2c_board_info.flags bit,
and uses it to initialize the i2c device node.  (And shrinks a few lines
that were overly long.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I2C devices do not have any form of ID as PCI or USB devices have.
No driver uses "MODULE_DEVICE_TABLE(i2c, ...)" because it doesn't
make sense. So we can get rid of struct i2c_device_id and the
associated support code.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Greg KH <greg@kroah.com>

    
Commit 3d73c288 ("mlx4_core: Fix section mismatches") introduced a
stupid bug in device init: when some of mlx4_init_one() was split off
into __mlx4_init_one(), the call from the main mlx4_init_one()
function was back to mlx4_init_one() rather than to __mlx4_init_one(),
which leads to an obvious infinite loop if the function is every
called.
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... and yes, caller wants it to return int.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit e30408b2 ("JFS: fix bio-related
build breakage") removed some "return 0;" statements, rather than
changing them to null returns.
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] SMP: Fix use of cpumasks.
  [MIPS] Revert "[MIPS] tlbex.c: Cleanup __init usage."
  [MIPS] CFE: Add missing parenthesis.

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (27 commits)
  alim15x3: remove redundant m5229_revision check
  sc1200: fix ->dma_base equal zero handling
  cs5520: fix ->dma_base equal zero handling
  sgiioc4: add missing ->dma_base check
  cs5535: add missing ->dma_base check
  ide: remove CONFIG_IDEDMA_IVB config option
  ide: change master/slave IDENTIFY order
  ide: move ide_config_drive_speed() calls to upper layers (take 2)
  pdc202xx_new: check ide_config_drive_speed() return value
  cs5535: check ide_config_drive_speed() return value
  amd74xx/via82cxxx: check ide_config_drive_speed() return value
  au1xxx: fix au1xxx_set_pio_mode()
  icside: use ide_tune_dma()
  ide-pmac: fix PIO setup and enable autotune
  ide-pmac: use ide_tune_dma() (take 2)
  ide-pmac: remove pmac_ide_do_setfeature() (take 2)
  ide-pmac: remove nIEN clearing from pmac_ide_do_setfeature()
  ide-pmac: use __ide_wait_stat()
  ide-pmac: remove extra good status wait from pmac_ide_do_setfeature()
  ide: add __ide_wait_stat() helper
  ...

* git://git.infradead.org/mtd-2.6: (91 commits)
  [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver
  [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug
  [MTD] [NAND] Fix compiler warning in Alauda driver
  [JFFS2] Remove stray debugging printk
  [JFFS2] Handle dirents on the flash with embedded zero bytes in names.
  [JFFS2] Check for creation of dirents with embedded zero bytes in name.
  [JFFS2] Don't count all 'very dirty' blocks except in debug mode
  [JFFS2] Check whether garbage-collection actually obsoleted its victim.
  [JFFS2] Relax threshold for triggering GC due to dirty blocks.
  [MTD] [OneNAND] Fix typo related with recent commit
  [JFFS2] Trigger garbage collection when very_dirty_list size becomes excessive
  [MTD] [NAND] Avoid deadlock in erase callback; release chip lock first.
  [MTD] [NAND] Resume method for CAFÉ NAND controller
  [MTD] [NAND] Fix PCI ident table for CAFÉ NAND controller.
  [MTD] [NAND] s3c2410: fix arch moves
  [MTD] [OneNAND] fix numerous races
  [MTD] map driver for NOR flash on the Intel Vermilion Range chipset
  [JFFS2] Fix unpoint length
  [MTD] fix CFI point method for discontiguous maps
  [MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (106 commits)
  KVM: Replace enum by #define
  KVM: Skip pio instruction when it is emulated, not executed
  KVM: x86 emulator: popf
  KVM: x86 emulator: fix src, dst value initialization
  KVM: x86 emulator: jmp abs
  KVM: x86 emulator: lea
  KVM: X86 emulator: jump conditional short
  KVM: x86 emulator: imlpement jump conditional relative
  KVM: x86 emulator: sort opcodes into ascending order
  KVM: Improve emulation failure reporting
  KVM: x86 emulator: pushf
  KVM: x86 emulator: call near
  KVM: x86 emulator: push imm8
  KVM: VMX: Fix exit qualification width on i386
  KVM: Move main vcpu loop into subarch independent code
  KVM: VMX: Move vm entry failure handling to the exit handler
  KVM: MMU: Don't do GFP_NOWAIT allocations
  KVM: Rename kvm_arch_ops to kvm_x86_ops
  KVM: Simplify memory allocation
  KVM: Hoist SVM's get_cs_db_l_bits into core code.
  ...