- 08 Nov, 2009 1 commit
-
-
Krzysztof Helt authored
1. Set the third argument of the snd_device_new to not NULL, so there is no warning about bug during chip detection. The third argument is not used in this driver. It was changed in my previous patch. 2. Remove the fm_port and mpu_port fields from the snd_es18xx structure. They can be converted to function arguments. 3. Remove the dmaN_size fields from the snd_es18xx structure. These values are used only in pointer functions and can be easily calculated. 4. Remove the ctrl_lock spinlock which is used only in one read function which is called once during chip initialization. There are many writes to the same register and they are not protected on purpose (see the comment ina the snd_es18xx_config_write()). 5. Use the first part of the text5Sources string table as the text4Soruces table (they are the same). 6. Merge the same cases for the ES1887 and ES1888 when setting chip's caps. 7. Move the snd_es18xx_reset() to __devinit section. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 05 Nov, 2009 1 commit
-
-
Krzysztof Helt authored
The cs4236 was two step detection with call to the snd_wss_free() between two steps. The snd_wss_free() did not free a sound device created in the snd_wss_create(). This caused an OOPS during module removal as the same sound device was released twice. The same OOPS happened if the cs4236 module loading failed. Fix this by adapting the snd_cs4236_create() to correctly work with chips less capable then cs4236. The snd_cs4236_create() behaves the same as the snd_wss_create() if the chip is less capable than the cs4236. Signed-off-by:
-
- 04 Nov, 2009 1 commit
-
-
Rafael Ignacio Zurita authored
This is a port of the sound/oss/sh_dac_audio.c driver. The driver uses an on-chip 8-bit D/A converter, which has a speaker connected to one of its channels, found in several ancient HP machines. For interrupts it uses a high-resolution timer (hrtimer). Tested on SH7709 based hp6xx (HP Jornada 680/690 and HP Palmtop 620lx/660lx). Also, since OSS Emulation works, the old OSS sound/oss/sh_dac_audio.c driver would be obsolete soon, and it could be removed. Signed-off-by:
Rafael Ignacio Zurita <rizurita@yahoo.com> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
- 01 Nov, 2009 2 commits
-
-
Stas Sergeev authored
Currently, if the high-res timers are unavailable, snd-pcsp does not initialize. People who choose it over pcspkr, loose their console beeps in that case and get annoyed. With this patch, the console beeps remain regardless of the high-res timers. Additionally, the "nopcm" modparam is added to forcibly disable the PCM capabilities of the driver. Signed-off-by:
Stas Sergeev <stsp@aknet.ru> Signed-off-by:
-
Takashi Iwai authored
-
- 30 Oct, 2009 12 commits
-
-
Krzysztof Helt authored
Remove intermediate snd_audiodrive structure between snd_card structure and snd_es18xx. This reduces size of source code and binary driver. Signed-off-by:
-
Krzysztof Helt authored
The snd_card pointer is redundant and code can be easily changed to work without it. Signed-off-by:
-
Krzysztof Helt authored
The OSS driver for Ensoniq SoundScape cards is broken after conversion to mutexes and a new ALSA snd-sscape driver handles all devices handled by the OSS one. The ALSA driver was tested with these cards: Spea V7 MediaFX Ensoniq Soundscape Elite Ensoniq Soundscape VIVO (this card is not handled by the OSS driver) Signed-off-by:
-
Clemens Ladisch authored
Activate the DXS volume controls only when the corresponding stream is being used. This makes the behaviour consistent with the other drivers that have per-stream volume controls. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Mark Hills authored
Signed-off-by:
Mark Hills <mark@pogo.org.uk> Acked-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Mark Hills authored
Fix a bug which can result in white noise from the driver after stream start or unpause. Signed-off-by:
-
Mark Hills authored
Fix a race which causes snd_pcm_update_hw_ptr_pos() to report a bug. Signed-off-by:
-
Roel Kluin authored
The variables are unsigned so the test `>= 0' is always true, the `< 0' test always fails. In these cases the other part of the test catches wrapped values. In dac_audio_write() there does not occur a test for wrapped values, but the test appears redundant. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Julia Lawall authored
If the NULL test on h is needed in snd_harmony_mixer_init, then the dereference should be after the NULL test. Actually, there is a sequence of calls: snd_harmony_create, then snd_harmony_pcm_init, and then snd_harmony_mixer_init. snd_harmony_create initializes h, but may indeed leave it as NULL. There was no NULL test at the beginning of snd_harmony_pcm_init, so I have added one. The NULL test in snd_harmony_mixer_init is then not necessary, but in case the ordering of the calls changes, I have left it, and moved the dereference after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
In pcm.c, if the NULL test on pcm is needed, then the dereference should be after the NULL test. In dummy.c and ali5451.c, the context of the calls to snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice, respectively cannot be NULL. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by:
-
Stas Sergeev authored
The attached patch fixes the problems introduced in this commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=eea0579fc85e64e9f05361d5aacf496fe7a151aa - Fix nForce workaround by honouring the pointer_update var - Revert "ns" to u64, as per the hrtimer API - Revert to the zero-delay timer startup, since I can't reproduce any problem with it (please, give me the hint!) Signed-off-by:
-
Wu Zhangjin authored
SND_CS5535AUDIO is available on Loongson(MIPS compatible) family machines, and checked it with ARCH=x86_64, no relative compiling warnings & errors, so, remove the platform dependency directly. Reported-by: rixed@happyleptic.org Acked-by:
Andres Salomon <dilinger@collabora.co.uk> Signed-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by:
-
- 13 Oct, 2009 8 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
In the commit f0613d57 ALSA: hda - Add full rates/formats support for Nvidia HDMI the flag LIMITIED_RATE_FMT_SUPPORT was set as default, as I forgot to clear before commit. Let's enable all formats/rates as default. Signed-off-by:
-
Philby John authored
After a reboot on an ARM1176 which amounts to a softreset, it has been noted that the ALSA driver does not get registered and the probe fails with the error "aaci-pl041 fpga:04: ac97 read back fail". In the process of reading from a register the SL1TxBusy bit is set indicating that the transceiver is busy and remains so until the default timeout occurs. Set the Power down register 0x26 to an arbitrary value as specified in the PL041 manual (page: 3-18) so that AACISL1TX/AACISL2TX registers take their default state. Signed-off-by:
Philby John <pjohn@in.mvista.com> Signed-off-by:
-
Takashi Iwai authored
The volume-knob widget needs to be set with 0x7f instead of 0xff for Dell laptops with STAC9228 codec, too, like the previous commit. Reference: Novell bnc#545013 http://bugzilla.novell.com/show_bug.cgi?id=545013Signed-off-by:
-
Takashi Iwai authored
On FSC laptops, the sound gets muted gradually when the volume is chnaged. This is due to the wrong volume-knob widget setup. The delta bit (bit 7) shouldn't be set for these devices. This patch adds a new quirk to set the value 0x7f to the widget 0x24 instead of 0xff. Reference: Novell bnc#546006 http://bugzilla.novell.com/show_bug.cgi?id=546006Signed-off-by:
-
Takashi Iwai authored
Signed-off-by: -
Tobias Hansen authored
snd-usb-us122l: corrent error number for not probing US-144 on ehci-hcd This is the correct error number for telling the USB system that this driver is not for the device. Signed-off-by:
Tobias Hansen <Tobias.Hansen@physik.uni-hamburg.de> Signed-off-by:
-
Takashi Iwai authored
ALC861-VD lenovo model causes overflow of spec->init_verbs entries due to the recent changes. Simply increase the array size to avoid the overflow. Reported-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
-
- 12 Oct, 2009 1 commit
-
-
Wu Zhangjin authored
SND_CS5535AUDIO is available on Loongson(MIPS compatible) family machines, and checked it with ARCH=x86_64, no relative compiling warnings & errors, so, remove the platform dependency directly. Reported-by: rixed@happyleptic.org Acked-by:
-
- 11 Oct, 2009 3 commits
-
-
David Henningsson authored
If two streams are started immediately after one another (such as a playback and a recording stream), the call to set hw params fails with EBUSY. This patch makes the call succeed, so playback and recording will work properly. Signed-off-by:
David Henningsson <launchpad.web@epost.diwic.se> Signed-off-by:
-
Krzysztof Helt authored
The chipsets with the isa_dma_bridge_buggy set do not stop DMA during DMA counter reads. The DMA counter is read in two 8-bit read steps on x86 platform. Sometimes, such reads happen during higher byte change so the lower byte is already decremented (rolled over) but the higher byte is not. It introduces an error that position is moved 256 bytes ahead of the true position. Thus, the next DMA position read can return a lower value then the previous read. If the DMA position is decreased (reversed) the ALSA subsystem is tricked into the playback underrun error and resets the playback. It results in a "pop" during a playback. Work around the issue by reading the counter twice and choosing a higher value. Signed-off-by:
-
Krzysztof Helt authored
The C4231 control set is a superset of the AD1848 control set so reuse the CS4231 controls definitions for the AD1848. Signed-off-by:
-
- 10 Oct, 2009 3 commits
-
-
Krzysztof Helt authored
Convert CS4231 mixer to dB scale after AD1848 mixer. Also, add missing microphone boost control for the AD1848 and correct wrong bits for loopback volume on the AD1848. Signed-off-by:
-
Krzysztof Helt authored
Fix coding style errors in the driver. Also, add missing argument for CMD_XXX_MIDI_VOL command. Signed-off-by:
-
Robert Hancock authored
Fix the num_total_dacs setting for Chaintech AV710. The existing comment that only PSDOUT0 is connected is correct, but since the card is using packed AC97 mode to send 6 channels to the codec, num_total_dacs should be set to 6 and not 2. This allows 6-channel surround to work. Also clarify a comment regarding the additional WM8728 codec on this card (it's connected to the SPDIF output and always receives the same data). Signed-off-by:
Robert Hancock <hancockrwd@gmail.com> Signed-off-by:
-
- 09 Oct, 2009 1 commit
-
-
Takashi Iwai authored
Allow Nvidia HDMI to support more possible sample rates and formats. At best, the really supported rates and formats should be determined together with the negotiation with the HDMI receiver, but it's currently not implemented yet (Nvidia stuff seems incompatible with HDMI 1.3 standard in this regard). As a compromise, we enable all bits, assuming that all recent devices do support such rates/formats. Tested-by:
Alan Alan <alanwww1@gmail.com> Signed-off-by:
-
- 08 Oct, 2009 5 commits
-
-
Takashi Iwai authored
-
Takashi Iwai authored
-
Robert Hancock authored
Increase the default and maximum PCM buffer prellocation size for ice1724's SPDIF and independent stereo pair outputs to 256K, which is the hardware's maximum supported size. This allows a reduction in interrupt rate and potentially power usage when an application is not latency-critical. Signed-off-by:
-
Krzysztof Helt authored
Fix following circular locking in the opl3 driver. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc3 #87 ------------------------------------------------------- swapper/0 is trying to acquire lock: (&opl3->voice_lock){..-...}, at: [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] but task is already holding lock: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&opl3->sys_timer_lock){..-...}: [<c02461d5>] validate_chain+0xa25/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca75046>] snd_opl3_note_on+0x686/0x790 [snd_opl3_synth] [<cca68912>] snd_midi_process_event+0x322/0x590 [snd_seq_midi_emul] [<cca74245>] snd_opl3_synth_event_input+0x15/0x20 [snd_opl3_synth] [<cca4dcc0>] snd_seq_deliver_single_event+0x100/0x200 [snd_seq] [<cca4de07>] snd_seq_deliver_event+0x47/0x1f0 [snd_seq] [<cca4e50b>] snd_seq_dispatch_event+0x3b/0x140 [snd_seq] [<cca5008c>] snd_seq_check_queue+0x10c/0x120 [snd_seq] [<cca5037b>] snd_seq_enqueue_event+0x6b/0xe0 [snd_seq] [<cca4e0fd>] snd_seq_client_enqueue_event+0xdd/0x100 [snd_seq] [<cca4eb7a>] snd_seq_write+0xea/0x190 [snd_seq] [<c02827b6>] vfs_write+0x96/0x160 [<c0282c9d>] sys_write+0x3d/0x70 [<c0202c45>] syscall_call+0x7/0xb -> #0 (&opl3->voice_lock){..-...}: [<c02467e6>] validate_chain+0x1036/0x1040 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c02269e8>] __do_softirq+0x78/0x110 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c020328e>] common_interrupt+0x2e/0x40 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c066>] i386_start_kernel+0x66/0x70 other info that might help us debug this: 2 locks held by swapper/0: #0: (&opl3->tlist){+.-...}, at: [<c022abd0>] run_timer_softirq+0xf0/0x1e0 #1: (&opl3->sys_timer_lock){..-...}, at: [<cca75169>] snd_opl3_timer_func+0x19/0xc0 [snd_opl3_synth] stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc3 #87 Call Trace: [<c0245188>] print_circular_bug+0xc8/0xd0 [<c02467e6>] validate_chain+0x1036/0x1040 [<c0247f14>] ? check_usage_forwards+0x54/0xd0 [<c0246aca>] __lock_acquire+0x2da/0xab0 [<c024731a>] lock_acquire+0x7a/0xa0 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c300>] _spin_lock_irqsave+0x40/0x60 [<cca748fe>] ? snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<cca748fe>] snd_opl3_note_off+0x1e/0xe0 [snd_opl3_synth] [<c044c307>] ? _spin_lock_irqsave+0x47/0x60 [<cca751f0>] snd_opl3_timer_func+0xa0/0xc0 [snd_opl3_synth] [<c022ac46>] run_timer_softirq+0x166/0x1e0 [<c022abd0>] ? run_timer_softirq+0xf0/0x1e0 [<cca75150>] ? snd_opl3_timer_func+0x0/0xc0 [snd_opl3_synth] [<c02269e8>] __do_softirq+0x78/0x110 [<c044c0fd>] ? _spin_unlock+0x1d/0x20 [<c025915f>] ? handle_level_irq+0xaf/0xe0 [<c0226ac6>] do_softirq+0x46/0x50 [<c0226e26>] irq_exit+0x36/0x40 [<c0204bd2>] do_IRQ+0x42/0xb0 [<c024463c>] ? trace_hardirqs_on_caller+0x12c/0x180 [<c020328e>] common_interrupt+0x2e/0x40 [<c0208d88>] ? default_idle+0x38/0x50 [<c021092f>] apm_cpu_idle+0x10f/0x290 [<c0201b11>] cpu_idle+0x21/0x40 [<c04443cd>] rest_init+0x4d/0x60 [<c055c835>] start_kernel+0x235/0x280 [<c055c210>] ? unknown_bootoption+0x0/0x210 [<c055c066>] i386_start_kernel+0x66/0x70 Signed-off-by: -
Pavel Hofman authored
* PLEASE NOTE - this change requires the corresponding update of envy24control for ice1712 - kind of an ABI change. * The "Multi Track Peak" control is read-only level meters indicator. * The control is VERY confusing to most users since it is currently displayed in regular mixers. E.g. alsamixer ignores its read-only status and allows changing the levels with keys which makes no sense. Signed-off-by:
Pavel Hofman <pavel.hofman@ivitera.com> Acked-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
-
- 07 Oct, 2009 1 commit
-
-
Takashi Iwai authored
Since patch_alc268() doesn't call set_capture_mixer() (due to its h/w design different from other siblings), it needs to call fixup_automic_adc() explicitly to set up the auto-mic routing. Otherwise the indices for int/ext mics aren't set properly. Reference: Novell bnc#544899 http://bugzilla.novell.com/show_bug.cgi?id=544899Signed-off-by:
-
- 06 Oct, 2009 1 commit
-
-
Mark Brown authored
-
