- 09 Sep, 2005 40 commits
-
-
Andrew Stribblehill authored
* Makes BFS code endianness-clean. * Fixes some signedness warnings. * Fixes a problem in fs/bfs/inode.c:164 where inodes not synced to disk don't get fully marked as clean. Here's how to reproduce it: # mount -o loop -t bfs /bfs.img /mnt # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 1 47 3% /mnt # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 5 508 1% /mnt # cp 60k-archive.zip /mnt/mt.zip # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 65 447 13% /mnt # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 2 46 5% /mnt # rm /mnt/mt.zip # echo $? 0 [If the unlink happens before the buffers flush, the following happens:] # df -i /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /bfs.img 48 2 46 5% /mnt # df -k /mnt Filesystem 1K-blocks Used Available Use% Mounted on /bfs.img 512 65 447 13% /mnt fs/bfs/bfs.h | 1 Signed-off-by:
Andrew Stribblehill <ads@wompom.org> Cc: <tigran@veritas.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Chen, Kenneth W authored
For architecture like ia64, the switch stack structure is fairly large (currently 528 bytes). For context switch intensive application, we found that significant amount of cache misses occurs in switch_to() function. The following patch adds a hook in the schedule() function to prefetch switch stack structure as soon as 'next' task is determined. This allows maximum overlap in prefetch cache lines for that structure. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Jason Baron authored
Race is as follows. Process A forks process B, both being part of the same session. Then, A calls disassociate_ctty while B forks C: A B ==== ==== fork() copy_signal() dissasociate_ctty() .... attach_pid(p, PIDTYPE_SID, p->signal->session); Now, C can have current->signal->tty pointing to a freed tty structure, as it hasn't yet been added to the session group (to have its controlling tty cleared on the diassociate_ctty() call). This has shown up as an oops but could be even more serious. I haven't tried to create a test case, but a customer has verified that the patch below resolves the issue, which was occuring quite frequently. I'll try and post the test case if i can. The patch simply checks for a NULL tty *after* it has been attached to the proper session group and clears it as necessary. Alternatively, we could simply do the tty assignment after the the process is added to the proper session group. Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Alexander Krizhanovsky authored
This patch for old autofs (version 3) cleans dentries which are not putted after killing the automount daemon (it's analogue of recent patch for autofs4). Signed-off-by:
Alexander Krizhanovsky <klx@yandex.ru> Cc: Ian Kent <raven@themaw.net> Signed-off-by:
-
Samuel Thibault authored
Some people use 66-cells braille devices for reading the console, and hence would like to reduce the width of the screen by using: stty cols 66 However, the vga text console doesn't behave correctly: the 14 first characters of the second line are put on the right of the first line and so forth. Here is a patch to correct that. It corrects the disp_end and offset registers of the vga board on console resize and console switch. On usual screens, you then correctly get a right and/or bottom blank margin. On some laptop panels, the output is resized so that text actually gets magnified, which can be great for some people (see http://dept-info.labri.fr/~thibault/ls.jpg ). Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Jason Baron authored
The idea of this patch is to lock both sides of a ptmx/pty pair during line discipline changing. This is needed to ensure that say a poll on one side of the pty doesn't occur while the line discipline is actively being changed. This resulted in an oops reported on lkml, see: http://marc.theaimsgroup.com/?l=linux-kernel&m=111342171410005&w=2 A 'hacky' approach was previously implmemented which served to eliminate the poll vs. line discipline changing race. However, this patch takes a more general approach to the issue. The patch only adds locking on a less often used path, the line-discipline changing path, as opposed to locking the ptmx/pty pair on read/write/poll paths. The patch below, takes both ldisc locks in either order b/c the locks are both taken under the same spinlock(). I thought about locking the ptmx/pty separately, such as master always first but that introduces a 3 way deadlock. For example, process 1 does a blocking read on the slave side. Then, process 2 does an ldisc change on the slave side, which acquires the master ldisc lock but not the slave's. Finally, process 3 does a write which blocks on the process 2's ldisc reference. This patch does introduce some changes in semantics. For example, a line discipline change on side 'a' of a ptmx/pty pair, will now wait for a read/write to complete on the other side, or side 'b'. The current behavior is to simply wait for any read/writes on only side 'a', not both sides 'a' and 'b'. I think this behavior makes sense, but I wanted to point it out. I've tested the patch with a bunch of read/write/poll while changing the line discipline out from underneath. This patch obviates the need for the above "hide the problem" patch. Signed-off-by:
-
Chaskiel Grundman authored
arch/alpha/kernel/module.c:process_reloc_for_got(), which figures out how big the .got section for a module should be, appears to be confusing r_offset (the file offset that the relocation needs to be applied to) with r_addend (the offset of the relocation's actual target address from the address of the relocation's symbol). Because of this, one .got entry is allocated for each relocation instead of one each unique symbol/addend. In the module I am working with, this causes the .got section to be almost 10 times larger than it needs to be (75544 bytes instead of 7608 bytes). As the .got is accessed with global-pointer-relative instructions, it needs to be within the 64k gp "zone", and a 75544 byte .got clearly does not fit. The result of this is that relocation overflows are detected during module load and the load is aborted. Change struct got_entry/process_reloc_for_got to fix this. Acked-by:
Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Ashok Raj authored
enforce_max_cpus nukes out cpu_present_map and cpu_possible_map making it impossible to add new cpus in the system. Since it doesnt provide any additional value apart this call and reference is removed. Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Acked-by:
Andi Kleen <ak@muc.de> Signed-off-by:
-
Ashok Raj authored
The use of non-shortcut version of routines breaking CPU hotplug. The option to select this via cmdline also is deleted with the physflat patch, hence directly placing this code under CONFIG_HOTPLUG_CPU. We dont want to use broadcast mode IPI's when hotplug is enabled. This causes bad effects in send IPI to a cpu that is offline which can trip when the cpu is in the process of being kicked alive. Signed-off-by:
-
Andrea Arcangeli authored
This is the same issue as ppc64 before, when returning to userland we shouldn't re-compute the seccomp check or the task could be killed during sigreturn when orig_eax is overwritten by the sigreturn syscall. This was found by Roland. This was harmless from a security standpoint, but some i686 users reported failures with auditing enabled system wide (some distro surprisingly makes it the default) and I reproduced it too by keeping the whole workload under strace -f. Patch is tested and works for me under strace -f. nobody@athlon:~/cpushare> strace -o /tmp/o -f python seccomp_test.py make: Nothing to be done for `seccomp_test'. Starting computing some malicious bytecode init load start stop receive_data failure kill exit_code 0 signal 9 The malicious bytecode has been killed successfully by seccomp Starting computing some safe bytecode init load start stop 174 counts kill exit_code 0 signal 0 The seccomp_test.py completed successfully, thank you for testing. (akpm: collaterally cleaned up a bit of do_syscall_trace() too) Signed-off-by:
Andrea Arcangeli <andrea@cpushare.com> Signed-off-by:
-
Yoichi Yuasa authored
Add TANBAC TB0287 support. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Tom Rini authored
The following patch changes the usages of PVR_440* into strcmp's with the cpu_name field, and removes the defines altogether. The Ebony portion was briefly tested long ago. One benefit of moving from PVR-tests to string tests in general is that not all CPUs can be on and be able to do this type of comparison. See http://patchwork.ozlabs.org/linuxppc/patch?id=1250 for the original thread. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Tom Rini authored
Modifies serial_init to get base baud rate from the rs_table entry instead of BAUD_BASE. This patch eliminates duplication between the SERIAL_PORT_DFNS macro and BAUD_BASE. Without the patch, if a port set the baud rate in SERIAL_PORT_DFNS, but did not update BASE_BAUD, the BASE_BAUD value would still be used. Signed-off-by:
Grant Likely <grant.likely@gdcanada.com> Signed-off-by:
-
Frank van Maarseveen authored
In the flush and invalidate bootcode on PPC4xx we were accidentally using the wrong instruction. Use cmplw, which reads from a register like we want. Signed-off-by:
-
Marcelo Tosatti authored
Subject says it all, there is no need to link perfmon.o on sub-architectures other than CONFIG_E500. Signed-off-by:
Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by:
-
Stephen Smalley authored
This patch removes the inode_post_link and inode_post_rename LSM hooks as they are unused (and likely useless). Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
-
Stephen Smalley authored
This patch removes the inode_post_create/mkdir/mknod/symlink LSM hooks as they are obsoleted by the new inode_init_security hook that enables atomic inode security labeling. If anyone sees any reason to retain these hooks, please speak now. Also, is anyone using the post_rename/link hooks; if not, those could also be removed. Signed-off-by:
-
Stephen Smalley authored
This patch modifies tmpfs to call the inode_init_security LSM hook to set up the incore inode security state for new inodes before the inode becomes accessible via the dcache. As there is no underlying storage of security xattrs in this case, it is not necessary for the hook to return the (name, value, len) triple to the tmpfs code, so this patch also modifies the SELinux hook function to correctly handle the case where the (name, value, len) pointers are NULL. The hook call is needed in tmpfs in order to support proper security labeling of tmpfs inodes (e.g. for udev with tmpfs /dev in Fedora). With this change in place, we should then be able to remove the security_inode_post_create/mkdir/... hooks safely. Signed-off-by:
-
Stephen Smalley authored
This patch modifies ext3 to call the inode_init_security LSM hook to obtain the security attribute for a newly created inode and to set the resulting attribute on the new inode as part of the same transaction. This parallels the existing processing for setting ACLs on newly created inodes. Signed-off-by:
-
Stephen Smalley authored
This patch modifies ext2 to call the inode_init_security LSM hook to obtain the security attribute for a newly created inode and to set the resulting attribute on the new inode. This parallels the existing processing for setting ACLs on newly created inodes. Signed-off-by:
-
Stephen Smalley authored
The following patch set enables atomic security labeling of newly created inodes by altering the fs code to invoke a new LSM hook to obtain the security attribute to apply to a newly created inode and to set up the incore inode security state during the inode creation transaction. This parallels the existing processing for setting ACLs on newly created inodes. Otherwise, it is possible for new inodes to be accessed by another thread via the dcache prior to complete security setup (presently handled by the post_create/mkdir/... LSM hooks in the VFS) and a newly created inode may be left unlabeled on the disk in the event of a crash. SELinux presently works around the issue by ensuring that the incore inode security label is initialized to a special SID that is inaccessible to unprivileged processes (in accordance with policy), thereby preventing inappropriate access but potentially causing false denials on legitimate accesses. A simple test program demonstrates such false denials on SELinux, and the patch solves the problem. Similar such false denials have been encountered in real applications. This patch defines a new inode_init_security LSM hook to obtain the security attribute to apply to a newly created inode and to set up the incore inode security state for it, and adds a corresponding hook function implementation to SELinux. Signed-off-by:
-
Ralf Baechle authored
Support for the new RBHMA4500 eval board for the TX4938. General update from the 8250 ancestor of this driver. Replace use of deprecated interfaces. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Mark Fasheh authored
Update the file systems in fs/ implementing a delete_inode() callback to call truncate_inode_pages(). One implementation note: In developing this patch I put the calls to truncate_inode_pages() at the very top of those filesystems delete_inode() callbacks in order to retain the previous behavior. I'm guessing that some of those could probably be optimized. Signed-off-by:
Mark Fasheh <mark.fasheh@oracle.com> Acked-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Mark Fasheh authored
Allow file systems supporting ->delete_inode() to call truncate_inode_pages() on their own. OCFS2 wants this so it can query the cluster before making a final decision on whether to wipe an inode from disk or not. In some corner cases an inode marked on the local node via voting may not actually get orphaned. A good example is node death before the transaction moving the inode to the orphan dir commits to the journal. Without this patch, the truncate_inode_pages() call in generic_delete_inode() would discard valid data for such inodes. During earlier discussion in the 2.6.13 merge plan thread, Christoph Hellwig indicated that other file systems might also find this useful. IMHO, the best solution would be to just allow ->drop_inode() to do the cluster query but it seems that would require a substantial reworking of that section of the code. Assuming it is safe to call write_inode_now() in ocfs2_delete_inode() for those inodes which won't actually get wiped, this solution should get us by for now. Trivial testing of this patch (and a related OCFS2 update) has shown this to avoid the corruption I'm seeing. Signed-off-by:
-
Kumar Gala authored
Looks like the help comment for MPC834x got merged incorrectly. Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Magnus Damm authored
Fix a typo involving CONFIG_ACPI_SRAT. Signed-off-by:
Magnus Damm <magnus@valinux.co.jp> Signed-off-by:
-
Giancarlo Formicuccia authored
An oversight. We don't want to carry the IO scheduler's "we hold exclusive fs resources" hint over to the child across fork(). Acked-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Andrew Morton authored
Remove the weird and apparently unnecessary logic in MP_processor_info() which assumes that the BSP is the first one to run MP_processor_info(). On one of my boxes that isn't true and cpu_possible_map gets the wrong value. Cc: Zwane Mwaikambo <zwane@arm.linux.org.uk> Cc: Alexander Nyberg <alexn@telia.com> Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
This makes ACPI_BLACKLIST_YEAR be consistently defined when ACPI is enabled, regardless of whether we're on x86 or not, and thus avoids bogus -Wundef warnings on ia64. Signed-off-by: -
Linus Torvalds authored
-
Karsten Wiese authored
The legacy PIC's name is "i8259". Signed-off-by:
Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Passes -m64 to sparse on uml/amd64, tells sparse to stay out of USER_OBJS. Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Removed gratuitous includes of asm/serial.h in synklinkmp and ip2main. Allows to remove the rest of "broken on sparc32" in drivers/char - this stuff doesn't break the build anymore. Since it got zero testing, it almost certainly won't work there, though... Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
<qualifier> void * is not the same as void <qualifier> *... Signed-off-by:
-
viro@ZenIV.linux.org.uk authored
Signed-off-by:
-
Brett M Russ authored
Previous INTx cleanup patch had a bug that was not caught. I found this last night during testing and can confirm that it is now 100% working. Signed-off-by:
Brett Russ <russb@emc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Acked-by:
Jeff Garzik <jgarzik@pobox.com> Signed-off-by:
-
Anton Altaparmakov authored
-
