- 11 Dec, 2009 40 commits
-
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
Clean up the names to be Linux like Remove the unused pad buffer Signed-off-by:
-
Alan Cox authored
Keep this small change separate for bisectability Signed-off-by:
-
Alan Cox authored
Clean up the minor uglies left from the previous work Signed-off-by:
-
Alan Cox authored
The Linux driver doesn't keep a pending queue as the old one did. so we can remove all the code related to it. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
We don't use them for anything having stripped out the debug gunge in the original driver. Signed-off-by:
-
Alan Cox authored
Sort out the variable naming and clean up types and obvious trivia Signed-off-by:
-
Alan Cox authored
So we can remove this alignment work. Signed-off-by:
-
Alan Cox authored
Say goodbye to it Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
A little more complex but again move the structure and typedef into into the documentation Signed-off-by:
-
Alan Cox authored
This is basically not really used so turn it into a u32 and comment the format for reference Signed-off-by:
-
Alan Cox authored
Turn it into a u32 and document the fields in a comment instead Signed-off-by:
-
Alan Cox authored
Remove the stuff that falls out from this always being zero. Signed-off-by:
-
Alan Cox authored
The NMI code is in the shipped driver for "validation". We won't be doing chip validation and we have proper core nmi handling so this can go. Signed-off-by:
-
Alan Cox authored
Perform some easy tidying so we can see what needs to be done next Signed-off-by:
-
Alan Cox authored
Another write once "variable" Signed-off-by:
-
Alan Cox authored
This puts all the eeprom handling in one place and cleans up the interfaces Signed-off-by:
-
Alan Cox authored
Turn this one into something resembling a clean Linux driver Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Julia Lawall authored
The definition of slic_netdev_ops has initializations of a local function and eth_mac_addr for its ndo_set_mac_address field. This change uses only the local function. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Paul Mundt authored
Both the max1363 and lis3l02dq modules rely on IIO trigger support in their ring buffer implementations, which is presently a separate config option. In the case of IIO_RING_BUFFER=y and IIO_TRIGGER=n, we end up with the following: ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined! ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/adc/max1363.ko] undefined! ERROR: "iio_trigger_unregister" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_notify_done" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_read_name" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_poll" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_attach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_register" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_free_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_trigger_dettach_poll_func" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! ERROR: "iio_allocate_trigger" [drivers/staging/iio/accel/lis3l02dq.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 This adds an IIO_TRIGGER select for these two drivers conditional on IIO ring buffer support. Caught with an SH randconfig in -next. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Randy Dunlap authored
Fix iio header files kernel-doc notation errors, spelling, typos, indentation, grammar, etc. It would also be good if these function names were spelled correctly, but I didn't change them: iio_push_or_escallate_ring_event() iio_trigger_dettach_poll_func() Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Randy Dunlap authored
Fix spelling, typos, indentation in iio Kconfig files. Signed-off-by:
-
Peter Huewe authored
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/staging/phison/phison.c Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Peter Huewe authored
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of drivers/staging/p9auth/p9auth.c Signed-off-by:
-
Peter Huewe authored
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of ./staging/cx25821/cx25821-core.c Signed-off-by:
-
Peter Huewe authored
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of ./staging/et131x/et131x_initpci.c Greg, please have a look at the small patch and either pull it through your staging tree, or please ack' it so Jiri can pull it through the trivial tree. Signed-off-by:
-
Nitin Gupta authored
TODO file for ramzswap. Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Signed-off-by:
-
Nitin Gupta authored
Short guide on how to setup and use ramzswap. Signed-off-by:
-
Nitin Gupta authored
Creates RAM based block devices (/dev/ramzswapX) which can be used (only) as swap disks. Pages swapped to these are compressed and stored in memory itself. The module is called ramzswap.ko. It depends on: - xvmalloc memory allocator (compiled with this driver) - lzo_compress.ko - lzo_decompress.ko See ramzswap.txt for usage details. Signed-off-by:
-
Nitin Gupta authored
* Features: - Low metadata overhead (just 4 bytes per object) - O(1) Alloc/Free - except when we have to call system page allocator to get additional memory. - Very low fragmentation: In all tests, xvmalloc memory usage is within 12% of "Ideal". - Pool based allocator: Each pool can grow and shrink. - It maps pages only when required. So, it does not hog vmalloc area which is very small on 32-bit systems. SLUB allocator could not be used due to fragmentation issues: http://code.google.com/p/compcache/wiki/AllocatorsComparison Data here shows kmalloc using ~43% more memory than TLSF and xvMalloc is showed ~2% more space efficiency than TLSF (due to smaller metadata). Creating various kmem_caches can reduce space efficiency gap but still problem of being limited to low memory exists. Also, it depends on allocating higher order pages to reduce fragmentation - this is not acceptable for ramzswap as it is used under memory crunch (its a swap device!). SLOB allocator could not be used do to reasons mentioned here: http://lkml.org/lkml/2009/3/18/210 * Implementation: It uses two-level bitmap search to find free list containing block of correct size. This idea is taken from TLSF (Two-Level Segregate Fit) allocator and is well explained in its paper (see [Links] below). * Limitations: - Poor scalability: No per-cpu data structures (work in progress). [Links] 1. Details and Performance data: http://code.google.com/p/compcache/wiki/xvMalloc http://code.google.com/p/compcache/wiki/xvMallocPerformance 2. TLSF memory allocator: home: http://rtportal.upv.es/rtmalloc/ paper: http://rtportal.upv.es/rtmalloc/files/MRBC_2008.pdfSigned-off-by:
-
Ian Abbott authored
The COMEDI_CMDTEST ioctl needs to clear unsupported bits in the struct comedi_cmd's convert_src and other *_src members. This needs fixing in the pcl816 driver's AI cmdtest. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ian Abbott authored
The i8253_cascade_ns_to_timer_2div() function (and i8253_cascade_ns_to_timer macro) checks the old values *d1 and *d2 for correctness as a heuristic before calculating new values. Don't call the function with uninitialized values in *d1 and *d2. Signed-off-by:
-
Ian Abbott authored
512 bytes of stack can be saved in serial_2002_open() by modifying 'struct config_t'. A short int suffices for the 'kind' and 'bits' members. (Actually, a char would suffice, but wouldn't save any more stack than a short int.) Signed-off-by:
-
Bernd Porr authored
I've fixed a bug in the USBDUX driver which caused timeouts while sending commands to the boards. This was mainly because of one bulk transfer which had a timeout of 1ms (!). I've now set all timeouts to 1000ms. From: Bernd Porr <BerndPorr@f2s.com> Signed-off-by: -
Dirk Hohndel authored
80 char limit (where useful) braces around single line block KERN_ facility for printk Signed-off-by:
Dirk Hohndel <hohndel@infradead.org> Signed-off-by:
-
Dirk Hohndel authored
add KERN_ facility to printk (mostly KERN_INFO, some KERN_WARNING) I think I found a bug - commented on it but didn't change as it's just in a printk (off by 1 error in output) Signed-off-by:
-
Dirk Hohndel authored
No code changes - left some 80 char violations alone as folding those lines would have made code less readable Signed-off-by:
-
