Control Groups: Add Paul Menage as maintainer
Signed-off-by: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add a <linux/gpio.h> defining fail/warn stubs for GPIO calls on platforms that
don't support the GPIO programming interface.  That includes the arch-specific
implementation glue otherwise.

This facilitates a new model for GPIO usage: drivers that can use GPIOs if
they're available, but don't require them.  One example of such a driver is
NAND driver for various FreeScale chips.  On platforms update with GPIO
support, they can be used instead of a worst-case delay to verify that the
BUSY signal is off.

(Also includes a couple minor unrelated doc updates.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Noticed by sparse, trivial to see:
drivers/char/specialix.c:2112:3: warning: context imbalance in 'sx_throttle' - unexpected unlock
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds basic get/set time support for the Seiko Instruments S-35390A.
This chip communicates using I2C and is used on the QNAP TS-109/TS-209 NAS
devices.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: Tim Ellis <tim@ngndg.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The memory controller has a requirement that while writing values, we need
to use echo -n. This patch fixes the problem and makes the UI more consistent.
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2f569afd
(CONFIG_HIGHPTE vs. sub-page page tables) introduced use of
inc_zone_page_state and dec_zone_page_state in include/linux/mm.h.

Those are defined in include/linux/vmstat.h, but after it includes
mm.h, making it impossible to include vmstat.h since inc_zone_page_state
and dec_zone_page_state then would be undefined.

arch/cris/arch-v10/kernel/time.c does just this, which makes the
CRIS v10 build break with the following error:

...
  CC      arch/cris/arch-v10/kernel/time.o
In file included from include/linux/vmstat.h:7,
                 from arch/cris/arch-v10/kernel/time.c:17:
include/linux/mm.h: In function 'pgtable_page_ctor':
include/linux/mm.h:902: error: implicit declaration of function 'inc_zone_page_state'
include/linux/mm.h: In function 'pgtable_page_dtor':
include/linux/mm.h:908: error: implicit declaration of function 'dec_zone_page_state'
make[2]: *** [arch/cris/arch-v10/kernel/time.o] Error 1
make[1]: *** [arch/cris/arch-v10/kernel] Error 2
make: *** [sub-make] Error 2
...

By changing kernel/time.c to include linux/mm.h, the build succeeds.
Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Thomas Lehmann <thomas.lehmann@alumni.tu-berlin.de> verified that this
entry works.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This version brings a number of minor fixes updating the type detector and
the unary tracker.  It also brings a few small fixes for false positives.
It also reverts the --file warning.  Of note:

 - limit CVS checks to added lines
 - improved type detections
 - fixes to the unary tracker

Andy Whitcroft (13):
      Version: 0.15
      EXPORT_SYMBOL checks need to accept array variables
      export checks must match DECLARE_foo and LIST_HEAD
      possible types: cleanup debugging missing line
      values: track values through preprocessor conditional paths
      typeof is actually a type
      possible types: detect definitions which cross lines
      values: include line numbers on value debug information
      values: ensure we find correctly record pending brackets
      values: simplify the brace history stack
      CVS keyword checks should only apply to added lines
      loosen spacing for comments
      allow braces for single statement blocks with multiline conditionals

Harvey Harrison (1):
      checkpatch: remove fastcall

Ingo Molnar (1):
      checkpatch.pl: revert wrong --file message

Uwe Kleine-Koenig (1):
      fix typo "goot" -> "good"
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Joel Schopp <jschopp@austin.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The documentation says the default value of notify_on_release of a child
cgroup is inherited from its parent, which is reasonable, but the
implementation just sets the flag disabled.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

P4 has been coming out as CPU_FAMILY=4 instead of 6: fix MPENTIUM4 typo.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  scsi: missing add of padded bytes to io completion byte count

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] fs/ocfs2/aops.c: Correct use of ! and &
  [2.6 patch] ocfs2: make dlm_do_assert_master() static
  [2.6 patch] make ocfs2_downconvert_thread() static
  [2.6 patch] fs/ocfs2/: possible cleanups
  [PATCH] ocfs2: le*_add_cpu conversion
  ocfs2: Fix writeout in ocfs2_data_convert_worker()
  ocfs2: Enable localalloc for local mounts

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ioat: fix 'ack' handling, driver must ensure that 'ack' is zero
  dmaengine: fix sparse warning
  fsldma: do not cleanup descriptors in hardirq context
  dmaengine: add driver for Freescale MPC85xx DMA controller

Original patch from Tejun Heo <htejun@gmail.com> but should use ->extra_len
and not ->data_len, as we would then overshoot the original request size.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched-devel:
  sched: revert load_balance_monitor() changes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86/xen: fix DomU boot problem
  x86: not set node to cpu_to_node if the node is not online
  x86, i387: fix ptrace leakage using init_fpu()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  x86: disable KVM for Voyager and friends
  KVM: VMX: Avoid rearranging switched guest msrs while they are loaded
  KVM: MMU: Fix race when instantiating a shadow pte
  KVM: Route irq 0 to vcpu 0 exclusively
  KVM: Avoid infinite-frequency local apic timer
  KVM: make MMU_DEBUG compile again
  KVM: move alloc_apic_access_page() outside of non-preemptable region
  KVM: SVM: fix Windows XP 64 bit installation crash
  KVM: remove the usage of the mmap_sem for the protection of the memory slots.
  KVM: emulate access to MSR_IA32_MCG_CTL
  KVM: Make the supported cpuid list a host property rather than a vm property
  KVM: Fix kvm_arch_vcpu_ioctl_set_sregs so that set_cr0 works properly
  KVM: SVM: set NM intercept when enabling CR0.TS in the guest
  KVM: SVM: Fix lazy FPU switching

Initialize 'ack' to zero in case the descriptor has been recycled.

Prevents "kernel BUG at crypto/async_tx/async_xor.c:185!"
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: stable@kernel.org

include/linux/dmaengine.h:364:2: warning: returning void-valued expression
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

"Cleaning" descriptors involves calling pending callbacks and clients
assume that their callback will only ever happen in softirq context.
Delay cleanup to the tasklet.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Zhang Wei <wei.zhang@freescale.com>

The driver implements DMA engine API for Freescale MPC85xx DMA controller,
which could be used by devices in the silicon.  The driver supports the
Basic mode of Freescale MPC85xx DMA controller.  The MPC85xx processors
supported include MPC8540/60, MPC8555, MPC8548, MPC8641 and so on.

The MPC83xx(MPC8349, MPC8360) are also supported.

[kamalesh@linux.vnet.ibm.com: build fix]
[dan.j.williams@intel.com: merge mm fixes, rebase on async_tx-2.6.25]
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
Acked-by: Kumar Gala <galak@gate.crashing.org>
Cc: Shannon Nelson <shannon.nelson@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

The following commits cause a number of regressions:

  commit 58e2d4ca
  Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
  Date:   Fri Jan 25 21:08:00 2008 +0100
  sched: group scheduling, change how cpu load is calculated

  commit 6b2d7700
  Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
  Date:   Fri Jan 25 21:08:00 2008 +0100
  sched: group scheduler, fix fairness of cpu bandwidth allocation for task groups

Namely:
 - very frequent wakeups on SMP, reported by PowerTop users.
 - cacheline trashing on (large) SMP
 - some latencies larger than 500ms

While there is a mergeable patch to fix the latter, the former issues
are not fixable in a manner suitable for .25 (we're at -rc3 now).

Hence we revert them and try again in v2.6.26.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Tested-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Construct Xen guest e820 map with a hole between 640K-1M.

It's pure luck that Xen kernels have gotten away with it in the past.

The patch below seems like the right thing to do. It certainly boots in
a domU without the DMI problem (without any of the other related patches
such as Alexander's).
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Tested-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

resolve boot problem reported by Mel Gorman:

   http://lkml.org/lkml/2008/2/13/404

init_cpu_to_node will use cpu->apic (from MADT or mptable) and
apic->node(from SRAT or AMD config space with k8_bus_64.c) to have
cpu->node mapping, and later identify_cpu will overwrite them
again...(with nearby_node...)

this patch checks if the node is online, otherwise it will not
update cpu_node map. so keep cpu_node map to online node before
identify_cpu..., to prevent possible error.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

This bug got introduced by the recent i387 merge:

  commit 44210111
  Author: Roland McGrath <roland@redhat.com>
  Date:   Wed Jan 30 13:31:50 2008 +0100

      x86: x86 i387 user_regset

Current usage of unlazy_fpu() in ptrace specific routines is wrong.
unlazy_fpu() will not init fpu if the task never used math. So the
ptrace calls can expose the parent tasks FPU data in some cases.

Replace it with the init_fpu() which will init the math state, if the
task never used math before.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix blkdev_issue_flush() not detecting and passing EOPNOTSUPP back
  block: fix shadowed variable warning in blk-map.c
  block: remove extern on function definition
  cciss: remove READ_AHEAD define and use block layer defaults
  make cdrom.c:check_for_audio_disc() static
  block/genhd.c: proper externs
  unexport blk_rq_map_user_iov
  unexport blk_{get,put}_queue
  block/genhd.c: cleanups
  proper prototype for blk_dev_init()
  block/blk-tag.c should #include "blk.h"
  Fix DMA access of block device in 64-bit kernel on some non-x86 systems with 4GB or upper 4GB memory
  block: separate out padding from alignment
  block: restore the meaning of rq->data_len to the true data length
  resubmit: cciss: procfs updates to display info about many
  splice: only return -EAGAIN if there's hope of more data
  block: fix kernel-docbook parameters and files

m68k{,nommu}: Wire up the new timerfd syscalls, which were introduced in
commit 4d672e7a ("timerfd: new timerfd API").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The FEC driver has a common interrupt handler for all interrupt event
types. It is raised on a number of distinct interrupt vectors.
This handler can't be re-entered while processing an interrupt, so
make sure all requested vectors are flagged as IRQF_DISABLED.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Need a declaration of do_IRQ for the 68328 interrupt handling code.
It is common to all m68knommu targets, so a common declaration makes
sense.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove duplicate hw_tick() function from 68328 timers code.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update the m68knommu defconfig.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 5ce2087e (Fix default compose
table initialization) left a trailing quote.

  CC      drivers/s390/char/defkeymap.o
drivers/s390/char/defkeymap.c:155: error: missing terminating ' character
drivers/s390/char/defkeymap.c:156: error: syntax error before ';' token
make[3]: *** [drivers/s390/char/defkeymap.o] Error 1

Fix that.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] remove unused variable
  [CIFS] consolidate duplicate code in posix/unix inode handling
  [CIFS] fix build break when proc disabled
  [CIFS] factoring out common code in get_inode_info functions
  [CIFS] fix prepath conversion when server supports posix paths
  [CIFS] Only convert / when server does not support posix paths
  [CIFS] Fix mixed case name in structure dfs_info3_param
  [CIFS] fixup prefixpaths which contain multiple path components
  [CIFS] fix typo
  [CIFS] patch to fix incorrect encoding of number of aces on set mode
  [CIFS] Fix typo in quota operations
  [CIFS] clean up some hard to read ifdefs
  [CIFS] reduce checkpatch warnings
  [CIFS] fix warning in cifs_spnego.c

This changes the "freezer" code used by suspend/hibernate in its treatment
of tasks in TASK_STOPPED (job control stop) and TASK_TRACED (ptrace) states.

As I understand it, the intent of the "freezer" is to hold all tasks
from doing anything significant.  For this purpose, TASK_STOPPED and
TASK_TRACED are "frozen enough".  It's possible the tasks might resume
from ptrace calls (if the tracer were unfrozen) or from signals
(including ones that could come via timer interrupts, etc).  But this
doesn't matter as long as they quickly block again while "freezing" is
in effect.  Some minor adjustments to the signal.c code make sure that
try_to_freeze() very shortly follows all wakeups from both kinds of
stop.  This lets the freezer code safely leave stopped tasks unmolested.

Changing this fixes the longstanding bug of seeing after resuming from
suspend/hibernate your shell report "[1] Stopped" and the like for all
your jobs stopped by ^Z et al, as if you had freshly fg'd and ^Z'd them.
It also removes from the freezer the arcane special case treatment for
ptrace'd tasks, which relied on intimate knowledge of ptrace internals.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Most classic Pentiums don't have hardware virtualization extension,
and building kvm with Voyager, Visual Workstation, or NUMAQ
generates spurious failures.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

KVM tries to run as much as possible with the guest msrs loaded instead of
host msrs, since switching msrs is very expensive.  It also tries to minimize
the number of msrs switched according to the guest mode; for example,
MSR_LSTAR is needed only by long mode guests.  This optimization is done by
setup_msrs().

However, we must not change which msrs are switched while we are running with
guest msr state:

 - switch to guest msr state
 - call setup_msrs(), removing some msrs from the list
 - switch to host msr state, leaving a few guest msrs loaded

An easy way to trigger this is to kexec an x86_64 linux guest.  Early during
setup, the guest will switch EFER to not include SCE.  KVM will stop saving
MSR_LSTAR, and on the next msr switch it will leave the guest LSTAR loaded.
The next host syscall will end up in a random location in the kernel.

Fix by reloading the host msrs before changing the msr list.
Signed-off-by: Avi Kivity <avi@qumranet.com>

For improved concurrency, the guest walk is performed concurrently with other
vcpus.  This means that we need to revalidate the guest ptes once we have
write-protected the guest page tables, at which point they can no longer be
modified.

The current code attempts to avoid this check if the shadow page table is not
new, on the assumption that if it has existed before, the guest could not have
modified the pte without the shadow lock.  However the assumption is incorrect,
as the racing vcpu could have modified the pte, then instantiated the shadow
page, before our vcpu regains control:

  vcpu0        vcpu1

  fault
  walk pte

               modify pte
               fault in same pagetable
               instantiate shadow page

  lookup shadow page
  conclude it is old
  instantiate spte based on stale guest pte

We could do something clever with generation counters, but a test run by
Marcelo suggests this is unnecessary and we can just do the revalidation
unconditionally.  The pte will be in the processor cache and the check can
be quite fast.
Signed-off-by: Avi Kivity <avi@qumranet.com>

Some Linux versions allow the timer interrupt to be processed by more than
one cpu, leading to hangs due to tsc instability.  Work around the issue
by only disaptching the interrupt to vcpu 0.

Problem analyzed (and patch tested) by Sheng Yang.
Signed-off-by: Avi Kivity <avi@qumranet.com>

If the local apic initial count is zero, don't start a an hrtimer with infinite
frequency, locking up the host.
Signed-off-by: Avi Kivity <avi@qumranet.com>

the cr3 variable is now inside the vcpu->arch structure.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>