Currently kdb allows the output of comamnds to be filtered using the
| grep feature. This is useful but does not permit the output emitted
shortly after a string match to be examined without wading through the
entire unfiltered output of the command. Such a feature is particularly
useful to navigate function traces because these traces often have a
useful trigger string *before* the point of interest.

This patch reuses the existing filtering logic to introduce a simple
forward search to kdb that can be triggered from the more prompt.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Currently when the "| grep" feature is used to filter the output of a
command then the prompt is not displayed for the subsequent command.
Likewise any characters typed by the user are also not echoed to the
display. This rather disconcerting problem eventually corrects itself
when the user presses Enter and the kdb_grepping_flag is cleared as
kdb_parse() tries to make sense of whatever they typed.

This patch resolves the problem by moving the clearing of this flag
from the middle of command processing to the beginning.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Issuing a stack dump feels ergonomically wrong when entering due to NMI.

Entering due to NMI is normally a reaction to a user request, either the
NMI button on a server or a "magic knock" on a UART. Therefore the
backtrace behaviour on entry due to NMI should be like SysRq-g (no stack
dump) rather than like oops.

Note also that the stack dump does not offer any information that
cannot be trivial retrieved using the 'bt' command.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then the prefix will be preserved when sent to
printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c8 ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

There was a follow on replacement patch against the prior
"kgdb: Timeout if secondary CPUs ignore the roundup".

See: https://lkml.org/lkml/2015/1/7/442

This patch is the delta vs the patch that was committed upstream:
  * Fix an off-by-one error in kdb_cpu().
  * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we
    really want a static limit.
  * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c
    (kgdb-next contains a patch which introduced pr_fmt() to this file
    to the tag will now be applied automatically).

Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The output of KDB 'summary' command should report MemTotal, MemFree
and Buffers output in kB. Current codes report in unit of pages.

A define of K(x) as
is defined in the code, but not used.

This patch would apply the define to convert the values to kB.
Please include me on Cc on replies. I do not subscribe to linux-kernel.
Signed-off-by: Jay Lan <jlan@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Pull nios2 fix from Ley Foon Tan:
 "This fixes incorrect behavior of some user programs"

* tag 'nios2-fixes-v3.19-final' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: fix unhandled signals

Pull aio nested sleep annotation from Ben LaHaise,

* git://git.kvack.org/~bcrl/aio-fixes:
  aio: annotate aio_read_event_ring for sleep patterns

Merge tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull ftrace fixes from Steven Rostedt:
 "During testing Sedat Dilek hit a "suspicious RCU usage" splat that
  pointed out a real bug.  During suspend and resume the tlb_flush
  tracepoint is called when the CPU is going offline.  As the CPU has
  been noted as offline, RCU is ignoring that CPU, which means that it
  can not use RCU protected locks.  When tracepoints are activated, they
  require RCU locking, and if RCU is ignoring a CPU that runs a
  tracepoint, there is a chance that the tracepoint could cause
  corruption.

  The solution was to change the tracepoint into a
  TRACE_EVENT_CONDITION() which allows us to check a condition to
  determine if the tracepoint should be called or not.  If the condition
  is not met, the rcu protected code will not be executed.  By adding
  the condition "cpu_online(smp_processor_id())", this will prevent the
  RCU protected code from being executed if the CPU is marked offline.

  After adding this, another bug was discovered.  As RCU checks rcu
  callers, if a rcu call is not done, there is no check (obviously).  We
  found that tracepoints could be added in RCU ignored locations and not
  have lockdep complain until the tracepoint is activated.  This missed
  places where tracepoints were added in places they should not have
  been.  To fix this, code was added in 3.18 that if lockdep is enabled,
  any tracepoint will still call the rcu checks even if the tracepoint
  is not enabled.  The bug here, is that the check does not take the
  CONDITION into account.  As the condition may prevent tracepoints from
  being activated in RCU ignored areas (as the one patch does), we get
  false positives when we enable lockdep and hit a tracepoint that the
  condition prevents it from being called in a RCU ignored location.

  The fix for this is to add the CONDITION to the rcu checks, even if
  the tracepoint is not enabled"

* tag 'trace-fixes-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  x86/tlb/trace: Do not trace on CPU that is offline
  tracing: Add condition check to RCU lockdep checks

Follow other architectures for user fault handling.
Signed-off-by: Chung-Ling Tang <cltang@codesourcery.com>
Acked-by: Ley Foon Tan <lftan@altera.com>

When taking a CPU down for suspend and resume, a tracepoint may be called
when the CPU has been designated offline. As tracepoints require RCU for
protection, they must not be called if the current CPU is offline.

Unfortunately, trace_tlb_flush() is called in this scenario as was noted
by LOCKDEP:

...

 Disabling non-boot CPUs ...
 intel_pstate CPU 1 exiting

 ===============================
 smpboot: CPU 1 didn't die...
 [ INFO: suspicious RCU usage. ]
 3.19.0-rc7-next-20150204.1-iniza-small #1 Not tainted
 -------------------------------
 include/trace/events/tlb.h:35 suspicious rcu_dereference_check() usage!

 other info that might help us debug this:

 RCU used illegally from offline CPU!
 rcu_scheduler_active = 1, debug_locks = 0
 no locks held by swapper/1/0.

 stack backtrace:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.19.0-rc7-next-20150204.1-iniza-small #1
 Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
  0000000000000001 ffff88011a44fe18 ffffffff817e370d 0000000000000011
  ffff88011a448290 ffff88011a44fe48 ffffffff810d6847 ffff8800c66b9600
  0000000000000001 ffff88011a44c000 ffffffff81cb3900 ffff88011a44fe78
 Call Trace:
  [<ffffffff817e370d>] dump_stack+0x4c/0x65
  [<ffffffff810d6847>] lockdep_rcu_suspicious+0xe7/0x120
  [<ffffffff810b71a5>] idle_task_exit+0x205/0x2c0
  [<ffffffff81054c4e>] play_dead_common+0xe/0x50
  [<ffffffff81054ca5>] native_play_dead+0x15/0x140
  [<ffffffff8102963f>] arch_cpu_idle_dead+0xf/0x20
  [<ffffffff810cd89e>] cpu_startup_entry+0x37e/0x580
  [<ffffffff81053e20>] start_secondary+0x140/0x150
 intel_pstate CPU 2 exiting

...

By converting the tlb_flush tracepoint to a TRACE_EVENT_CONDITION where the
condition is cpu_online(smp_processor_id()), we can avoid calling RCU protected
code when the CPU is offline.

Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com

Cc: stable@vger.kernel.org # 3.17+
Fixes: d17d8f9d "x86/mm: Add tracepoints for TLB flushes"
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The trace_tlb_flush() tracepoint can be called when a CPU is going offline.
When a CPU is offline, RCU is no longer watching that CPU and since the
tracepoint is protected by RCU, it must not be called. To prevent the
tlb_flush tracepoint from being called when the CPU is offline, it was
converted to a TRACE_EVENT_CONDITION where the condition checks if the
CPU is online before calling the tracepoint.

Unfortunately, this was not enough to stop lockdep from complaining about
it. Even though the RCU protected code of the tracepoint will never be
called, the condition is hidden within the tracepoint, and even though the
condition prevents RCU code from being called, the lockdep checks are
outside the tracepoint (this is to test tracepoints even when they are not
enabled).

Even though tracepoints should be checked to be RCU safe when they are not
enabled, the condition should still be considered when checking RCU.

Link: http://lkml.kernel.org/r/CA+icZUUGiGDoL5NU8RuxKzFjoLjEKRtUWx=JB8B9a0EQv-eGzQ@mail.gmail.com

Fixes: 3a630178 "tracing: generate RCU warnings even when tracepoints are disabled"
Cc: stable@vger.kernel.org # 3.18+
Acked-by: Dave Hansen <dave@sr71.net>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull one more infiniband revert from Roland Dreier:
 "One more last-second RDMA change for 3.19: Yann realized that the
  previous revert of new userspace ABI did not go far enough, and we're
  still exposing a change that we don't want.  Revert even closer to
  3.18 interface to make sure we get things right in the long run"

Yann Droneaud pipes up:
 "I hope this could go in v3.19 as, at this stage, we don't want to
  expose any bits of this ABI in a released kernel"

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  Revert "IB/core: Add support for extended query device caps"

Pull btrfs fix from Chris Mason:
 "Forrest Liu tracked down a missing blk_finish_plug in the btrfs
  logging code.  This isn't a new bug, and it's hard to hit.  But, it's
  safe enough for inclusion now, and in my for-linus branch"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: add missing blk_finish_plug in btrfs_sync_log()

Merge branches 'timers-urgent-for-linus' and 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer and x86 fix from Ingo Molnar:
 "A CLOCK_TAI early expiry fix and an x86 microcode driver oops fix"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Fix incorrect tai offset calculation for non high-res timer systems

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Return error from driver init code when loader is disabled

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix deadline parameter modification handling
  sched/wait: Remove might_sleep() from wait_event_cmd()
  sched: Fix crash if cpuset_cpumask_can_shrink() is passed an empty cpumask
  sched/fair: Avoid using uninitialized variable in preferred_group_nid()

Pull core kernel fixes from Ingo Molnar:
 "Two liblockdep fixes and a CPU hotplug race fix"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tools/liblockdep: don't include host headers
  tools/liblockdep: ignore generated .so file
  smpboot: Add missing get_online_cpus() in smpboot_register_percpu_thread()

Pull sound fixes from Takashi Iwai:
 "Hopefully the final pull request for 3.19: this ended up with a
  slightly higher volume than wished, but I put them all as they are
  either stable or 3.19 regression fixes.

  Most of commits are from ASoC, and have been stewed for a while in
  linux-next.  The only change in the common code is the regression
  fixes for ASoC AC97 stuff wrt device registrations.  The rest are
  device-specific, mostly small fixes in various ASoC drivers and ak411x
  on ice1724 boards"

* tag 'sound-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: Intel: fix sst firmware path for cht-bsw-rt5672
  ARM: dts: Fix I2S1, I2S2 compatible for exynos4 SoCs
  ASoC: sgtl5000: add delay before first I2C access
  MAINTAINERS: ASoC: add maintainer for Intel BDW/HSW ASoC driver
  ASoC: atmel_ssc_dai: fix the setting for DSP mode
  ASoC: sgtl5000: Use shift mask when setting codec mode
  ASoC: tlv320aic3x: Fix data delay configuration
  ALSA: ak411x: Fix stall in work callback
  ASoC: Intel: Used lock version to update shim registers
  ASoC: wm8731: init mutex in i2c init path
  ASoC: atmel_ssc_dai: fix start event for I2S mode
  ASoC: rt5640: Add RT5642 ACPI ID for Intel Baytrail
  ASoC: wm97xx: Reset AC'97 device before registering it
  ASoC: Add support for allocating AC'97 device before registering it

Merge misc fixes from Andrew Morton:
 "7 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/debug_pagealloc: fix build failure on ppc and some other archs
  nilfs2: fix deadlock of segment constructor over I_SYNC flag
  MAINTAINERS: remove SUPERH website
  memcg, shmem: fix shmem migration to use lrucare
  mm: export "high_memory" symbol on !MMU
  .mailmap: update Konstantin Khlebnikov's email address
  mm: pagewalk: call pte_hole() for VM_PFNMAP during walk_page_range

Pull MIPS fixes from Ralf Baechle:
 "The pending MIPS fixes for 3.19.  All across the field and nothing
  particularly severe or dramatic"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (23 commits)
  IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp
  MIPS: Fix syscall_get_nr for the syscall exit tracing.
  MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers.
  MIPS: elf2ecoff: Rewrite main processing loop to switch.
  MIPS: fork: Fix MSA/FPU/DSP context duplication race
  MIPS: Fix C0_Pagegrain[IEC] support.
  MIPS: traps: Fix inline asm ctc1 missing .set hardfloat
  MIPS: mipsregs.h: Add write_32bit_cp1_register()
  MIPS: Fix kernel lockup or crash after CPU offline/online
  MIPS: OCTEON: fix kernel crash when offlining a CPU
  MIPS: ARC: Fix build error.
  MIPS: IRQ: Fix disable_irq on CPU IRQs
  MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs
  MIPS: Fix restart of indirect syscalls
  MIPS: ELF: fix loading o32 binaries on 64-bit kernels
  MIPS: mips-cm: Fix sparse warnings
  MIPS: Kconfig: Fix recursive dependency.
  MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.
  MIPS: JZ4740: Fixup #include's (sparse)
  MIPS: Wire up execveat(2).
  ...

While commit 7e36ef82 ("IB/core: Temporarily disable
ex_query_device uverb") is correct as it makes the extended
QUERY_DEVICE uverb (which came as part of commit 5a77abf9
("IB/core: Add support for extended query device caps") and commit
860f10a7 ("IB/core: Add flags for on demand paging support")) not
available to userspace, it doesn't address the initial issue regarding
ib_copy_to_udata() [1][2].

Additionally, further discussions around this new uverb seems to
conclude it would require a different data structure than the one
currently described in <rdma/ib_user_verbs.h> [3].

Both of these issues require a revert of the changes, so this patch
partially reverts commit 8cdd312c ("IB/mlx5: Implement the ODP
capability query verb") and commit 860f10a7 ("IB/core: Add flags
for on demand paging support") and fully reverts commit 5a77abf9
("IB/core: Add support for extended query device caps").

[1] "Re: [PATCH v3 06/17] IB/core: Add support for extended query device caps"
    http://mid.gmane.org/1418733236.2779.26.camel@opteya.com

[2] "Re: [PATCH] IB/core: Temporarily disable ex_query_device uverb"
    http://mid.gmane.org/1423067503.3030.83.camel@opteya.com

[3] "RE: [PATCH v1 1/5] IB/uverbs: ex_query_device: answer must not depend on request's comp_mask"
    http://mid.gmane.org/2807E5FD2F6FDA4886F6618EAC48510E0CC12C30@CRSMSX101.amr.corp.intel.com

Cc: Eli Cohen <eli@mellanox.com>
Cc: Haggai Eran <haggaie@mellanox.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>

Kim Phillips reported following build failure.

  LD      init/built-in.o
  mm/built-in.o: In function `free_pages_prepare':
  mm/page_alloc.c:770: undefined reference to `.kernel_map_pages'
  mm/built-in.o: In function `prep_new_page':
  mm/page_alloc.c:933: undefined reference to `.kernel_map_pages'
  mm/built-in.o: In function `map_pages':
  mm/compaction.c:61: undefined reference to `.kernel_map_pages'
  make: *** [vmlinux] Error 1

Reason for this problem is that commit 031bc574
("mm/debug-pagealloc: make debug-pagealloc boottime configurable")
forgot to remove the old declaration of kernel_map_pages() for some
architectures.  This patch removes them to fix build failure.
Reported-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nilfs2 eventually hangs in a stress test with fsstress program.  This
issue was caused by the following deadlock over I_SYNC flag between
nilfs_segctor_thread() and writeback_sb_inodes():

  nilfs_segctor_thread()
    nilfs_segctor_thread_construct()
      nilfs_segctor_unlock()
        nilfs_dispose_list()
          iput()
            iput_final()
              evict()
                inode_wait_for_writeback()  * wait for I_SYNC flag

  writeback_sb_inodes()
     * set I_SYNC flag on inode->i_state
    __writeback_single_inode()
      do_writepages()
        nilfs_writepages()
          nilfs_construct_dsync_segment()
            nilfs_segctor_sync()
               * wait for completion of segment constructor
    inode_sync_complete()
       * clear I_SYNC flag after __writeback_single_inode() completed

writeback_sb_inodes() calls do_writepages() for dirty inodes after
setting I_SYNC flag on inode->i_state.  do_writepages() in turn calls
nilfs_writepages(), which can run segment constructor and wait for its
completion.  On the other hand, segment constructor calls iput(), which
can call evict() and wait for the I_SYNC flag on
inode_wait_for_writeback().

Since segment constructor doesn't know when I_SYNC will be set, it
cannot know whether iput() will block or not unless inode->i_nlink has a
non-zero count.  We can prevent evict() from being called in iput() by
implementing sop->drop_inode(), but it's not preferable to leave inodes
with i_nlink == 0 for long periods because it even defers file
truncation and inode deallocation.  So, this instead resolves the
deadlock by calling iput() asynchronously with a workqueue for inodes
with i_nlink == 0.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mentioned website only displays information about buying and selling
domains.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It has been reported that 965GM might trigger

  VM_BUG_ON_PAGE(!lrucare && PageLRU(oldpage), oldpage)

in mem_cgroup_migrate when shmem wants to replace a swap cache page
because of shmem_should_replace_page (the page is allocated from an
inappropriate zone).  shmem_replace_page expects that the oldpage is not
on LRU list and calls mem_cgroup_migrate without lrucare.  This is
obviously incorrect because swapcache pages might be on the LRU list
(e.g. swapin readahead page).

Fix this by enabling lrucare for the migration in shmem_replace_page.
Also clarify that lrucare should be used even if one of the pages might
be on LRU list.

The BUG_ON will trigger only when CONFIG_DEBUG_VM is enabled but even
without that the migration code might leave the old page on an
inappropriate memcg' LRU which is not that critical because the page
would get removed with its last reference but it is still confusing.

Fixes: 0a31bc97 ("mm: memcontrol: rewrite uncharge API")
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Dave Airlie <airlied@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>	[3.17+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The symbol 'high_memory' is provided on both MMU- and NOMMU-kernels, but
only one of them is exported, which leads to module build errors in
drivers that work fine built-in:

  ERROR: "high_memory" [drivers/net/virtio_net.ko] undefined!
  ERROR: "high_memory" [drivers/net/ppp/ppp_mppe.ko] undefined!
  ERROR: "high_memory" [drivers/mtd/nand/nand.ko] undefined!
  ERROR: "high_memory" [crypto/tcrypt.ko] undefined!
  ERROR: "high_memory" [crypto/cts.ko] undefined!

This exports the symbol to get these to work on NOMMU as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

get_maintainer.pl returns k.khlebnikov@samsung.com via git history, for
which emails get rejected:

   RCPT TO:<k.khlebnikov@samsung.com>
   550 5.1.1 Recipient address rejected: User unknown

Use his other address that passes vger's mxverify:

   RCPT TO:<koct9i@gmail.com>
   250 2.1.5 OK ir10si13843754pbc.62 - gsmtp

and add his old email address in the wrong email address field.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

walk_page_range() silently skips vma having VM_PFNMAP set, which leads
to undesirable behaviour at client end (who called walk_page_range).
Userspace applications get the wrong data, so the effect is like just
confusing users (if the applications just display the data) or sometimes
killing the processes (if the applications do something with
misunderstanding virtual addresses due to the wrong data.)

For example for pagemap_read, when no callbacks are called against
VM_PFNMAP vma, pagemap_read may prepare pagemap data for next virtual
address range at wrong index.

Eventually userspace may get wrong pagemap data for a task.
Corresponding to a VM_PFNMAP marked vma region, kernel may report
mappings from subsequent vma regions.  User space in turn may account
more pages (than really are) to the task.

In my case I was using procmem, procrack (Android utility) which uses
pagemap interface to account RSS pages of a task.  Due to this bug it
was giving a wrong picture for vmas (with VM_PFNMAP set).

Fixes: a9ff785e ("mm/pagewalk.c: walk_page_range should avoid VM_PFNMAP areas")
Signed-off-by: Shiraz Hashim <shashim@codeaurora.org>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>	[3.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'asoc-fix-ac97-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: AC'97 fixes

These are rather too large for this late in the release cycle but
they're clear, well understood and have been tested to fix a regression
which was introduced for v3.19.  The details are all in Lars' changelog
and they've been cooking in -next for a while, to a large extent out
of conservatism about the size.

Merge tag 'asoc-fix-intel-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fix for Intel firmware name

Another one liner that arrived after the earlier pull request.  There's
a trivial conflict with my -next branch, I'll send a pull request with
that resolution and some other new stuff before Monday.

Merge tag 'asoc-fix-v3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.19

A few last minute fixes for v3.19, all driver specific.  None of them
stand out particularly - it's all the standard people who are affected
will care stuff.

The Samsung fix is a DT only fix for the audio controller, it's being
merged via the ASoC tree due to process messups (the submitter sent it
at the end of a tangentally related series rather than separately to the
ARM folks) in order to make sure that it gets to people sooner.

All sst firmware is provided under the intel directory of the linux-firmware
tree. By default this directory structure is kept when installing on a target
system. Change the path to expect a default linux-firmware installation.
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

I2S1, I2S2 on Exynos4 SoC series have limited functionality compared
to I2S0, "samsung,s3c6410-i2s" compatible should be used for them.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org