- 08 Jun, 2020 5 commits
-
-
Paolo Bonzini authored
is_intercept takes an INTERCEPT_* constant, not SVM_EXIT_*; because of this, the compiler was removing the body of the conditionals, as if is_intercept returned 0. This unveils a latent bug: when clearing the VINTR intercept, int_ctl must also be changed in the L1 VMCB (svm->nested.hsave), just like the intercept itself is also changed in the L1 VMCB. Otherwise V_IRQ remains set and, due to the VINTR intercept being clear, we get a spurious injection of a vector 0 interrupt on the next L2->L1 vmexit. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
GCC10 fails to build vmx_preemption_timer_test: gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I../../../../tools/include -I../../../../tools/arch/x86/include -I../../../../usr/include/ -Iinclude -Ix86_64 -Iinclude/x86_64 -I.. -pthread -no-pie x86_64/evmcs_test.c ./linux/tools/testing/selftests/kselftest_harness.h ./linux/tools/testing/selftests/kselftest.h ./linux/tools/testing/selftests/kvm/libkvm.a -o ./linux/tools/testing/selftests/kvm/x86_64/evmcs_test /usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o): ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603: multiple definition of `ctrl_exit_rev'; /tmp/ccMQpvNt.o: ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603: first defined here /usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o): ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602: multiple definition of `ctrl_pin_rev'; /tmp/ccMQpvNt.o: ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602: first defined here ... ctrl_exit_rev/ctrl_pin_rev/basic variables are only used in vmx_preemption_timer_test.c, just move them there. Fixes: 8d7fbf01 ("KVM: selftests: VMX preemption timer migration test") Reported-by:
Marcelo Bandeira Condotta <mcondotta@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200608112346.593513-2-vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Add x86_64/debug_regs to .gitignore. Reported-by:
-
Vitaly Kuznetsov authored
handle_vmptrst()/handle_vmread() stopped injecting #PF unconditionally and switched to nested_vmx_handle_memory_failure() which just kills the guest with KVM_EXIT_INTERNAL_ERROR in case of MMIO access, zeroing 'exception' in kvm_write_guest_virt_system() is not needed anymore. This reverts commit 541ab2ae. Signed-off-by:
-
Vitaly Kuznetsov authored
Syzbot reports the following issue: WARNING: CPU: 0 PID: 6819 at arch/x86/kvm/x86.c:618 kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618 ... Call Trace: ... RIP: 0010:kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618 ... nested_vmx_get_vmptr+0x1f9/0x2a0 arch/x86/kvm/vmx/nested.c:4638 handle_vmon arch/x86/kvm/vmx/nested.c:4767 [inline] handle_vmon+0x168/0x3a0 arch/x86/kvm/vmx/nested.c:4728 vmx_handle_exit+0x29c/0x1260 arch/x86/kvm/vmx/vmx.c:6067 'exception' we're trying to inject with kvm_inject_emulated_page_fault() comes from: nested_vmx_get_vmptr() kvm_read_guest_virt() kvm_read_guest_virt_helper() vcpu->arch.walk_mmu->gva_to_gpa() but it is only set when GVA to GPA conversion fails. In case it doesn't but we still fail kvm_vcpu_read_guest_page(), X86EMUL_IO_NEEDED is returned and nested_vmx_get_vmptr() calls kvm_inject_emulated_page_fault() with zeroed 'exception'. This happen when the argument is MMIO. Paolo also noticed that nested_vmx_get_vmptr() is not the only place in KVM code where kvm_read/write_guest_virt*() return result is mishandled. VMX instructions along with INVPCID have the same issue. This was already noticed before, e.g. see commit 541ab2ae ("KVM: x86: work around leak of uninitialized stack contents") but was never fully fixed. KVM could've handled the request correctly by going to userspace and performing I/O but there doesn't seem to be a good need for such requests in the first place. Introduce vmx_handle_memory_failure() as an interim solution. Note, nested_vmx_get_vmptr() now has three possible outcomes: OK, PF, KVM_EXIT_INTERNAL_ERROR and callers need to know if userspace exit is needed (for KVM_EXIT_INTERNAL_ERROR) in case of failure. We don't seem to have a good enum describing this tristate, just add "int *ret" to nested_vmx_get_vmptr() interface to pass the information. Reported-by: syzbot+2a7156e11dc199bdbd8a@syzkaller.appspotmail.com Suggested-by:Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
- 05 Jun, 2020 2 commits
-
-
Paolo Bonzini authored
Instructions starting with 0f18 up to 0f1f are reserved nops, except those that were assigned to MPX. These include the endbr markers used by CET. List them correctly in the opcode table. Signed-off-by: -
Vitaly Kuznetsov authored
Marcelo reports that kvm selftests fail to build with "make ARCH=x86_64": gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I../../../../tools/include -I../../../../tools/arch/x86_64/include -I../../../../usr/include/ -Iinclude -Ilib -Iinclude/x86_64 -I.. -c lib/kvm_util.c -o /var/tmp/20200604202744-bin/lib/kvm_util.o In file included from lib/kvm_util.c:11: include/x86_64/processor.h:14:10: fatal error: asm/msr-index.h: No such file or directory #include <asm/msr-index.h> ^~~~~~~~~~~~~~~~~ compilation terminated. "make ARCH=x86", however, works. The problem is that arch specific headers for x86_64 live in 'tools/arch/x86/include', not in 'tools/arch/x86_64/include'. Fixes: 66d69e08 ("selftests: fix kvm relocatable native/cross builds and installs") Reported-by:
-
- 04 Jun, 2020 33 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM update for 5.8 - Updates and bug fixes for secure guest support - Other minor bug fixes and cleanups.
-
Anthony Yznaga authored
Consolidate the code and correct the comments to show that the actions taken to update existing mappings to disable or enable dirty logging are not necessary when creating, moving, or deleting a memslot. Signed-off-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Message-Id: <1591128450-11977-4-git-send-email-anthony.yznaga@oracle.com> Signed-off-by:
-
Anthony Yznaga authored
On large memory guests it has been observed that creating a memslot for a very large range can take noticeable amount of time. Investigation showed that the time is spent walking the rmaps to update existing sptes to remove write access or set/clear dirty bits to support dirty logging. These rmap walks are unnecessary when creating or moving a memslot. A newly created memslot will not have any existing mappings, and the existing mappings of a moved memslot will have been invalidated and flushed. Any mappings established once the new/moved memslot becomes visible will be set using the properties of the new slot. Signed-off-by:
-
Anthony Yznaga authored
There's no write access to remove. An existing memslot cannot be updated to set or clear KVM_MEM_READONLY, and any mappings established in a newly created or moved read-only memslot will already be read-only. Signed-off-by:
-
Denis Efremov authored
Replace opencoded alloc and copy with vmemdup_user(). Signed-off-by:
Denis Efremov <efremov@linux.com> Message-Id: <20200603101131.2107303-1-efremov@linux.com> Signed-off-by:
-
Sean Christopherson authored
Remove KVM_DEBUG_FS, which can easily be misconstrued as controlling KVM-as-a-host. The sole user of CONFIG_KVM_DEBUG_FS was removed by commit cfd8983f ("x86, locking/spinlocks: Remove ticket (spin)lock implementation"). Signed-off-by:
-
Huacai Chen authored
This patch enable KVM support for Loongson-3 by selecting HAVE_KVM, but only enable KVM/VZ on Loongson-3A R4+ (because VZ of early processors are incomplete). Besides, Loongson-3 support SMP guests, so we clear the linked load bit of LLAddr in kvm_vz_vcpu_load() if the guest has more than one VCPUs. Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by:
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Co-developed-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <1590220602-3547-15-git-send-email-chenhc@lemote.com> Signed-off-by:
-
Huacai Chen authored
This patch add more MMIO load/store instructions emulation, which can be observed in QXL and some other device drivers: 1, LWL, LWR, LDW, LDR, SWL, SWR, SDL and SDR for all MIPS; 2, GSLBX, GSLHX, GSLWX, GSLDX, GSSBX, GSSHX, GSSWX and GSSDX for Loongson-3. Reviewed-by:
-
Huacai Chen authored
Loongson-3 has CONFIG6 and DIAG registers which need to be emulated. CONFIG6 is mostly used to enable/disable FTLB and SFB, while DIAG is mostly used to flush BTB, ITLB, DTLB, VTLB and FTLB. Acked-by:
-
Huacai Chen authored
Loongson-3 overrides lwc2 instructions to implement CPUCFG and CSR read/write functions. These instructions all cause guest exit so CSR doesn't benifit KVM guest (and there are always legacy methods to provide the same functions as CSR). So, we only emulate CPUCFG and let it return a reduced feature list (which means the virtual CPU doesn't have any other advanced features, including CSR) in KVM. Reviewed-by:
-
Huacai Chen authored
This patch add Loongson-3 Virtual IPI interrupt support in the kernel. The current implementation of IPI emulation in QEMU is based on GIC for MIPS, but Loongson-3 doesn't use GIC. Furthermore, IPI emulation in QEMU is too expensive for performance (because of too many context switches between Host and Guest). With current solution, the IPI delay may even cause RCU stall warnings in a multi-core Guest. So, we design a faster solution that emulate IPI interrupt in kernel (only used by Loongson-3 now). Reviewed-by:
-
Huacai Chen authored
In current implementation, MIPS KVM uses IP2, IP3, IP4 and IP7 for external interrupt, two kinds of IPIs and timer interrupt respectively, but Loongson-3 based machines prefer to use IP2, IP3, IP6 and IP7 for two kinds of external interrupts, IPI and timer interrupt. So we define two priority-irq mapping tables: kvm_loongson3_priority_to_irq[] for Loongson-3, and kvm_default_priority_to_irq[] for others. The virtual interrupt infrastructure is updated to deliver all types of interrupts from IP2, IP3, IP4, IP6 and IP7. Reviewed-by:
-
Huacai Chen authored
Loongson-3's indexed cache operations need a node-id in the address, but in KVM guest the node-id may be incorrect. So, let indexed cache operations cause guest exit on Loongson-3. Reviewed-by:
-
Huacai Chen authored
KVM guest has two levels of address translation: guest tlb translates GVA to GPA, and root tlb translates GPA to HPA. By default guest's CCA is controlled by guest tlb, but Loongson-3 maintains all cache coherency by hardware (including multi-core coherency and I/O DMA coherency) so it prefers all guest mappings be cacheable mappings. Thus, we use root tlb to control guest's CCA for Loongson-3. Reviewed-by:
-
Huacai Chen authored
Loongson-3 has lddir/ldpte instructions and their related CP0 registers are the same as HTW. So we introduce a cpu_guest_has_ldpte flag and use it to indicate whether we need to save/restore HTW related CP0 registers (PWBase, PWSize, PWField and PWCtl). Acked-by:
-
Huacai Chen authored
Loongson-3 can use lddir/ldpte instuctions to accelerate page table walking, so use them to lookup gpa_mm.pgd. Reviewed-by:
-
Huacai Chen authored
Add EVENTFD support for KVM/MIPS, which is needed by VHOST. Tested on Loongson-3 platform. Reviewed-by:
-
Huacai Chen authored
Loongson-3 based machines can have as many as 16 CPUs, and so does memory slots, so increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16. Reviewed-by:
-
Xing Li authored
If a CPU support more than 32bit vmbits (which is true for 64bit CPUs), VPN2_MASK set to fixed 0xffffe000 will lead to a wrong EntryHi in some functions such as _kvm_mips_host_tlb_inv(). The cpu_vmbits definition of 32bit CPU in cpu-features.h is 31, so we still use the old definition. Cc: Stable <stable@vger.kernel.org> Reviewed-by:
Xing Li <lixing@loongson.cn> [Huacai: Improve commit messages] Signed-off-by:
-
Xing Li authored
The code in decode_config4() of arch/mips/kernel/cpu-probe.c asid_mask = MIPS_ENTRYHI_ASID; if (config4 & MIPS_CONF4_AE) asid_mask |= MIPS_ENTRYHI_ASIDX; set_cpu_asid_mask(c, asid_mask); set asid_mask to cpuinfo->asid_mask. So in order to support variable ASID_MASK, KVM_ENTRYHI_ASID should also be changed to cpu_asid_mask(&boot_cpu_data). Cc: Stable <stable@vger.kernel.org> #4.9+ Reviewed-by: -
Babu Moger authored
Both Intel and AMD support (MPK) Memory Protection Key feature. Move the feature detection from VMX to the common code. It should work for both the platforms now. Signed-off-by:
Babu Moger <babu.moger@amd.com> Message-Id: <158932795627.44260.15144185478040178638.stgit@naples-babu.amd.com> Signed-off-by:
-
Xiaoyao Li authored
Delay the assignment of array.maxnent to use correct value for the case cpuid->nent > KVM_MAX_CPUID_ENTRIES. Fixes: e53c95e8 ("KVM: x86: Encapsulate CPUID entries and metadata in struct") Signed-off-by:
Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200604041636.1187-1-xiaoyao.li@intel.com> Signed-off-by:
-
Sean Christopherson authored
Unconditionally return true when querying the validity of MSR_IA32_PERF_CAPABILITIES so as to defer the validity check to intel_pmu_{get,set}_msr(), which can properly give the MSR a pass when the access is initiated from host userspace. The MSR is emulated so there is no underlying hardware dependency to worry about. Fixes: 27461da3 ("KVM: x86/pmu: Support full width counting") Cc: Like Xu <like.xu@linux.intel.com> Signed-off-by: -
Paolo Bonzini authored
After commit 63d04348 ("KVM: x86: move kvm_create_vcpu_debugfs after last failure point") we are creating the pre-vCPU debugfs files after the creation of the vCPU file descriptor. This makes it possible for userspace to reach kvm_vcpu_release before kvm_create_vcpu_debugfs has finished. The vcpu->debugfs_dentry then does not have any associated inode anymore, and this causes a NULL-pointer dereference in debugfs_create_file. The solution is simply to avoid removing the files; they are cleaned up when the VM file descriptor is closed (and that must be after KVM_CREATE_VCPU returns). We can stop storing the dentry in struct kvm_vcpu too, because it is not needed anywhere after kvm_create_vcpu_debugfs returns. Reported-by: syzbot+705f4401d5a93a59b87d@syzkaller.appspotmail.com Fixes: 63d04348 ("KVM: x86: move kvm_create_vcpu_debugfs after last failure point") Signed-off-by:
-
Linus Torvalds authored
The atomisp_mrfld_power() function isn't actually ever called, because the two call-sites have commented out the use because it breaks on some platforms. That results in: drivers/staging/media/atomisp/pci/atomisp_v4l2.c:764:12: warning: ‘atomisp_mrfld_power’ defined but not used [-Wunused-function] 764 | static int atomisp_mrfld_power(struct atomisp_device *isp, bool enable) | ^~~~~~~~~~~~~~~~~~~ during the build. Rather than commenting out the use entirely, just disable it semantically instead (using a "0 &&" construct), leaving the call in place from a syntax standpoint, and avoiding the warning. I really don't want my builds to have any warnings that can then hide real issues. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h> media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ...
-
Linus Torvalds authored
Merge more updates from Andrew Morton: "More mm/ work, plenty more to come Subsystems affected by this patch series: slub, memcg, gup, kasan, pagealloc, hugetlb, vmscan, tools, mempolicy, memblock, hugetlbfs, thp, mmap, kconfig" * akpm: (131 commits) arm64: mm: use ARCH_HAS_DEBUG_WX instead of arch defined x86: mm: use ARCH_HAS_DEBUG_WX instead of arch defined riscv: support DEBUG_WX mm: add DEBUG_WX support drivers/base/memory.c: cache memory blocks in xarray to accelerate lookup mm/thp: rename pmd_mknotpresent() as pmd_mkinvalid() powerpc/mm: drop platform defined pmd_mknotpresent() mm: thp: don't need to drain lru cache when splitting and mlocking THP hugetlbfs: get unmapped area below TASK_UNMAPPED_BASE for hugetlbfs sparc32: register memory occupied by kernel as memblock.memory include/linux/memblock.h: fix minor typo and unclear comment mm, mempolicy: fix up gup usage in lookup_node tools/vm/page_owner_sort.c: filter out unneeded line mm: swap: memcg: fix memcg stats for huge pages mm: swap: fix vmstats for huge pages mm: vmscan: limit the range of LRU type balancing mm: vmscan: reclaim writepage is IO cost mm: vmscan: determine anon/file pressure balance at the reclaim root mm: balance LRU lists based on relative thrashing mm: only count actual rotations as LRU reclaim cost ...
-
Zong Li authored
Extract DEBUG_WX to mm/Kconfig.debug for shared use. Change to use ARCH_HAS_DEBUG_WX instead of DEBUG_WX defined by arch port. Signed-off-by:
Zong Li <zong.li@sifive.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/e19709e7576f65e303245fe520cad5f7bae72763.1587455584.git.zong.li@sifive.comSigned-off-by:
-
Zong Li authored
Extract DEBUG_WX to mm/Kconfig.debug for shared use. Change to use ARCH_HAS_DEBUG_WX instead of DEBUG_WX defined by arch port. Signed-off-by:
-
Zong Li authored
Support DEBUG_WX to check whether there are mapping with write and execute permission at the same time. [akpm@linux-foundation.org: replace macros with C] Signed-off-by:
-
Zong Li authored
Patch series "Extract DEBUG_WX to shared use". Some architectures support DEBUG_WX function, it's verbatim from each others, so extract to mm/Kconfig.debug for shared use. PPC and ARM ports don't support generic page dumper yet, so we only refine x86 and arm64 port in this patch series. For RISC-V port, the DEBUG_WX support depends on other patches which be merged already: - RISC-V page table dumper - Support strict kernel memory permissions for security This patch (of 4): Some architectures support DEBUG_WX function, it's verbatim from each others. Extract to mm/Kconfig.debug for shared use. [akpm@linux-foundation.org: reword text, per Will Deacon & Zong Li] Link: http://lkml.kernel.org/r/20200427194245.oxRJKj3fn%25akpm@linux-foundation.org [zong.li@sifive.com: remove the specific name of arm64] Link: http://lkml.kernel.org/r/3a6a92ecedc54e1d0fc941398e63d504c2cd5611.1589178399.git.zong.li@sifive.com [zong.li@sifive.com: add MMU dependency for DEBUG_WX] Link: http://lkml.kernel.org/r/4a674ac7863ff39ca91847b10e51209771f99416.1589178399.git.zong.li@sifive.comSuggested-by:
Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by:
-
Scott Cheloha authored
Searching for a particular memory block by id is an O(n) operation because each memory block's underlying device is kept in an unsorted linked list on the subsystem bus. We can cut the lookup cost to O(log n) if we cache each memory block in an xarray. This time complexity improvement is significant on systems with many memory blocks. For example: 1. A 128GB POWER9 VM with 256MB memblocks has 512 blocks. With this change memory_dev_init() completes ~12ms faster and walk_memory_blocks() completes ~12ms faster. Before: [ 0.005042] memory_dev_init: adding memory blocks [ 0.021591] memory_dev_init: added memory blocks [ 0.022699] walk_memory_blocks: walking memory blocks [ 0.038730] walk_memory_blocks: walked memory blocks 0-511 After: [ 0.005057] memory_dev_init: adding memory blocks [ 0.009415] memory_dev_init: added memory blocks [ 0.010519] walk_memory_blocks: walking memory blocks [ 0.014135] walk_memory_blocks: walked memory blocks 0-511 2. A 256GB POWER9 LPAR with 256MB memblocks has 1024 blocks. With this change memory_dev_init() completes ~88ms faster and walk_memory_blocks() completes ~87ms faster. Before: [ 0.252246] memory_dev_init: adding memory blocks [ 0.395469] memory_dev_init: added memory blocks [ 0.409413] walk_memory_blocks: walking memory blocks [ 0.433028] walk_memory_blocks: walked memory blocks 0-511 [ 0.433094] walk_memory_blocks: walking memory blocks [ 0.500244] walk_memory_blocks: walked memory blocks 131072-131583 After: [ 0.245063] memory_dev_init: adding memory blocks [ 0.299539] memory_dev_init: added memory blocks [ 0.313609] walk_memory_blocks: walking memory blocks [ 0.315287] walk_memory_blocks: walked memory blocks 0-511 [ 0.315349] walk_memory_blocks: walking memory blocks [ 0.316988] walk_memory_blocks: walked memory blocks 131072-131583 3. A 32TB POWER9 LPAR with 256MB memblocks has 131072 blocks. With this change we complete memory_dev_init() ~37 minutes faster and walk_memory_blocks() at least ~30 minutes faster. The exact timing for walk_memory_blocks() is missing, though I observed that the soft lockups in walk_memory_blocks() disappeared with the change, suggesting that lower bound. Before: [ 13.703907] memory_dev_init: adding blocks [ 2287.406099] memory_dev_init: added all blocks [ 2347.494986] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2527.625378] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2707.761977] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 2887.899975] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3068.028318] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3248.158764] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3428.287296] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3608.425357] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3788.554572] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 3968.695071] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 [ 4148.823970] [c000000014c5bb60] [c000000000869af4] walk_memory_blocks+0x94/0x160 After: [ 13.696898] memory_dev_init: adding blocks [ 15.660035] memory_dev_init: added all blocks (the walk_memory_blocks traces disappear) There should be no significant negative impact for machines with few memory blocks. A sparse xarray has a small footprint and an O(log n) lookup is negligibly slower than an O(n) lookup for only the smallest number of memory blocks. 1. A 16GB x86 machine with 128MB memblocks has 132 blocks. With this change memory_dev_init() completes ~300us faster and walk_memory_blocks() completes no faster or slower. The improvement is pretty close to noise. Before: [ 0.224752] memory_dev_init: adding memory blocks [ 0.227116] memory_dev_init: added memory blocks [ 0.227183] walk_memory_blocks: walking memory blocks [ 0.227183] walk_memory_blocks: walked memory blocks 0-131 After: [ 0.224911] memory_dev_init: adding memory blocks [ 0.226935] memory_dev_init: added memory blocks [ 0.227089] walk_memory_blocks: walking memory blocks [ 0.227089] walk_memory_blocks: walked memory blocks 0-131 [david@redhat.com: document the locking] Link: http://lkml.kernel.org/r/bc21eec6-7251-4c91-2f57-9a0671f8d414@redhat.comSigned-off-by:
Scott Cheloha <cheloha@linux.ibm.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Acked-by:
Nathan Lynch <nathanl@linux.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Rick Lindsley <ricklind@linux.vnet.ibm.com> Cc: Scott Cheloha <cheloha@linux.ibm.com> Link: http://lkml.kernel.org/r/20200121231028.13699-1-cheloha@linux.ibm.comSigned-off-by:
-
Anshuman Khandual authored
pmd_present() is expected to test positive after pmdp_mknotpresent() as the PMD entry still points to a valid huge page in memory. pmdp_mknotpresent() implies that given PMD entry is just invalidated from MMU perspective while still holding on to pmd_page() referred valid huge page thus also clearing pmd_present() test. This creates the following situation which is counter intuitive. [pmd_present(pmd_mknotpresent(pmd)) = true] This renames pmd_mknotpresent() as pmd_mkinvalid() reflecting the helper's functionality more accurately while changing the above mentioned situation as follows. This does not create any functional change. [pmd_present(pmd_mkinvalid(pmd)) = true] This is not applicable for platforms that define own pmdp_invalidate() via __HAVE_ARCH_PMDP_INVALIDATE. Suggestion for renaming came during a previous discussion here. https://patchwork.kernel.org/patch/11019637/ [anshuman.khandual@arm.com: change pmd_mknotvalid() to pmd_mkinvalid() per Will] Link: http://lkml.kernel.org/r/1587520326-10099-3-git-send-email-anshuman.khandual@arm.comSuggested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1584680057-13753-3-git-send-email-anshuman.khandual@arm.comSigned-off-by:
-
