- 20 Jul, 2008 40 commits
-
-
Michael Krufky authored
The build option, MEDIA_TUNER_CUSTOMIZE, allows us to disable tuner drivers that would have otherwise been selected by default. This is an advanced customization option that should be disabled by default. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
$ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \; linux/drivers/media/dvb/dvb-usb/m920x.c linux/drivers/media/dvb/ttpci/budget-ci.c Signed-off-by: -
Mauro Carvalho Chehab authored
Auto-selects tda10023, for budget-ci, if !DVB_FE_CUSTOMISE. This is needed for Technotrend budget C-1501 dvb board. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Sigmund Augdal authored
The following experimental patch adds support for the technotrend budget C-1501 dvb-c card. The parameters used to configure the tda10023 demod chip are largely determined experimentally, but works quite for me in my initial tests. Signed-off-by:
Sigmund Augdal <sigmund@snap.tv> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Jean Delvare authored
Clean up the use of structure templates in bttv-i2c. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. This clean-up shrinks bttv-i2c.o by 29% (x86_64). Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Clean up the use of structure templates in zoran_card. For one thing, a real template is supposed to be read-only. And in some cases it's more efficient to initialize the few fields we need individually. Signed-off-by:
Ronald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by:
-
Antti Palosaari authored
- select DVB_PLL - fix typos in comments Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
- support for Anysee E30C Plus rev 0.4 - set IO port E - set correct TS mode - change deltaf according to latest Windows driver Signed-off-by:
-
Antti Palosaari authored
- make TS output mode configurable Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Carl Karsten authored
Signed-off-by:
Carl Karsten <carl@personnelware.com> Signed-off-by:
-
Dmitry Belimov authored
Split the Beholder M6 family to different models. Because M6 hasn`t RDS, M63 has chip with AC3 codec, M6 Extra has other type of HF module. Add correct data for support MPEG encoder. Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Dmitry Belimov authored
Rework saa7134_enable_i2s function. Remove vendor specific data. Configure I2S output port specific for model of SAA7133/5-SAA7134. I think it is more good. Renamed definition of I2S audio output control register. It`s SAA7133/5 register Start video port after configuring procedure. Signed-off-by:
-
Antti Palosaari authored
- coding style fixes raised by checkpatch Signed-off-by:
-
Devin Heitmueller authored
- Separate the newer variant of the HVR-900 into its own device profile because it has a Micronas DRX397 instead of the Zarlink demod. This doesn't make the device work, but at least we don't try to initialize it as though it had the Zarlink device. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> [mchehab@infradead.org: avoid compilation breakage at mainstream, where drx397xD.h doesn't exist yet] Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - this now finally adds hardware frequency seek support Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - afc indication: device has no indication whether freq is too low or too high therefore afc always return 1, when freq is wrong Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - comment on how to listen to an usb audio device (i get so many questions about that...) - code cleanup (error handling, more warnings, spacing, ...) Signed-off-by:
-
Tobias Lorenz authored
This patch brings the following changes: - version bumped to 1.0.8 for all the following patches - si470x_get_freq now returns errno Signed-off-by:
-
Tobias Lorenz authored
this patch brings the following changes: - move the global disconnect lock into the device structure - code cleanup (spaces to tabs, long line splits, ...) Signed-off-by:
-
Devin Heitmueller authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Michael Krufky authored
Only one frontend is enabled right now. The second frontend can lock, but transport doesn't work yet. The device will be supported as a single tuner device until the second frontend is working. Signed-off-by:
-
Michael Krufky authored
This file was renamed but we forgot to change it in the comments. Signed-off-by:
-
Dmitri Belimov authored
Rework saa7134_enable_i2s function. Add vendor specific data. Add definition for I2S audio output control register. Signed-off-by:
-
Antti Palosaari authored
- update license comments - change MODULE_DESCRIPTION from device specific to chipset specific - correct debug switch from deb_rc to deb_info - correct MPEG2 stream interval from 1.25 to 1 - change frontend_attach error code from -EIO to -ENODEV Signed-off-by:
-
Antti Palosaari authored
- remove useless identify_state - device is always warm Signed-off-by:
-
Antti Palosaari authored
- coding style fixes raised by checkpatch Signed-off-by:
-
Hans Verkuil authored
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match the v4l2_buf_type name. Signed-off-by:
-
Hans Verkuil authored
V4L/DVB (7948): videodev: add missing vidioc_try_fmt_sliced_vbi_output and VIDIOC_ENUMOUTPUT handling There was no vidioc_try_fmt_sliced_vbi_output, instead vidioc_try_fmt_vbi_output was reused. The VIDIOC_ENUMOUTPUT handling was missing altogether, even though the callback existed. Signed-off-by:
-
Hans Verkuil authored
The default videodev behavior for VIDIOC_G_STD is not correct for all devices. Add a new callback that drivers can use instead. Signed-off-by:
-
Hans Verkuil authored
__video_do_ioctl incorrectly zeroed the tuner field of v4l2_frequency and did not zero the full fmt union of v4l2_format. Signed-off-by:
-
Tobias Lorenz authored
Signed-off-by:
-
Mike Isely authored
Back in the early days of the pvrusb2 driver, the kernel class mechanism in use for the sysfs interface had no means to pass per-attribute information to the show / store functions. This forced me to implement a horrible ugly thunking mechanism (i.e. infer the missing data through the use of dedicated cookie cutter bounce functions). However now we're using a better mechanism which also passes enough additional information to the show / store functions that we no longer need the hack. So eliminate all the crap. Yay! Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
The driver enforces a "quiet period" on the encoder in certain situations before attempting to operate it. This seems to help avoid video encoding errors / corruption. The quiet period was 50msec, but through experimentation it has been observed to improve further if the interval is increased to 100msec. Signed-off-by:
-
Mike Isely authored
This is primarily a cosmetic change to make it easier to change some of the time constants used in the driver. Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Hans Verkuil authored
Separate gpio_init field and xceive_pin and combine the two when the gpio is initialized. So there is no longer any need to set the xceive pin in the gpio_init values, simplifying the creation of a new card definition. Signed-off-by:
-
Hans Verkuil authored
Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by:
-
