Changes queued in gpio/next for the start of the 3.3 merge window

* tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add decode of WM8994 GPIO configuration
  gpio: Convert GPIO drivers to module_platform_driver
  gpio: Fix typo in comment in Samsung driver
  gpio: Explicitly index samsung_gpio_cfgs
  gpio: Add Linus Walleij as gpio co-maintainer
  of: Add device tree selftests
  of: create of_phandle_args to simplify return of phandle parsing data
  gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()
  gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
  gpiolib: output basic details and consolidate gpio device drivers
  pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
  spi/pl022: make the chip deselect handling thread safe
  spi/pl022: add support for pm_runtime autosuspend
  spi/pl022: disable the PL022 block when unused
  spi/pl022: move device disable to workqueue thread
  spi/pl022: skip default configuration before suspending
  spi/pl022: fix build warnings
  spi/pl022: only enable RX interrupts when TX is complete

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (21 commits)
  m68k/mac: Make CONFIG_HEARTBEAT unavailable on Mac
  m68k/serial: Remove references to obsolete serial config options
  m68k/net: Remove obsolete IRQ_FLG_* users
  m68k: Don't comment out syscalls used by glibc
  m68k/atari: Move declaration of atari_SCC_reset_done to header file
  m68k/serial: Remove references to obsolete CONFIG_SERIAL167
  m68k/hp300: Export hp300_ledstate
  m68k: Initconst section fixes
  m68k/mac: cleanup macro case
  mac_scsi: fix mac_scsi on some powerbooks
  m68k/mac: fix powerbook 150 adb_type
  m68k/mac: fix baboon irq disable and shutdown
  m68k/mac: oss irq fixes
  m68k/mac: fix nubus slot irq disable and shutdown
  m68k/mac: enable via_alt_mapping on performa 580
  m68k/mac: cleanup forward declarations
  m68k/mac: cleanup mac_irq_pending
  m68k/mac: cleanup mac_clear_irq
  m68k/mac: early console
  m68k/mvme16x: Add support for EARLY_PRINTK
  ...

Fix up trivial conflict in arch/m68k/Kconfig.debug due to new
EARLY_PRINTK config option addition clashing with movement of the
BOOTPARAM options.

* 'for-linus' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (207 commits)
  ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.h
  ARM: 7269/1: mach-sa1100: fix sched_clock breakage
  ARM: 7198/1: arm/imx6: add restart support for imx6q
  ARM: restart: remove the now empty arch_reset()
  ARM: restart: remove comments about adding code to arch_reset()
  ARM: restart: lpc32xx & u300: remove unnecessary printk
  ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook
  ARM: restart: w90x900: use new restart hook
  ARM: restart: Versatile Express: use new restart hook
  ARM: restart: versatile: use new restart hook
  ARM: restart: u300: use new restart hook
  ARM: restart: tegra: use new restart hook
  ARM: restart: spear: use new restart hook
  ARM: restart: shark: use new restart hook
  ARM: restart: sa1100: use new restart hook
  ARM: 7252/1: restart: S5PV210: use new restart hook
  ARM: 7251/1: restart: S5PC100: use new restart hook
  ARM: 7250/1: restart: S5P64X0: use new restart hook
  ARM: 7266/1: restart: S3C64XX: use new restart hook
  ARM: 7265/1: restart: S3C24XX: use new restart hook
  ...

Fix up trivial conflict in arch/arm/mm/init.c due to removal of
memblock_init() clashing with the movement of the sorting of the meminfo
array.

Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm

* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h

* 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: gracefully handle NULL pstore_info functions
  pstore: pass reason to backend write callback

* 'misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: pcibr: Use kmemdup rather than duplicating its implementation
  ia64: sn: Use kmemdup rather than duplicating its implementation
  ia64: tioca: Use kmemdup rather than duplicating its implementation
  [IA64] Merge overlapping reserved regions at boot

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (56 commits)
  m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled
  m68k/Kconfig: Separate classic m68k and coldfire early
  m68k: add ColdFire with MMU enabled support to the m68k mem init code
  m68k: do not use m68k startup or interrupt code for ColdFire CPUs
  m68k: add ColdFire FPU support for the V4e ColdFire CPUs
  m68k: adjustments to stack frame for ColdFire with MMU enabled
  m68k: use non-MMU linker script for ColdFire MMU builds
  m68k: ColdFire with MMU enabled uses same clocking code as non-MMU
  m68k: add code to setup a ColdFire 54xx platform when MMU enabled
  m68k: use non-MMU entry.S code when compiling for ColdFire CPU
  m68k: create ColdFire MMU pgalloc code
  m68k: compile appropriate mm arch files for ColdFire MMU support
  m68k: ColdFire V4e MMU paging init code and miss handler
  m68k: use ColdFire MMU read/write bit flags when ioremapping
  m68k: modify cache push and clear code for ColdFire with MMU enable
  m68k: use tracehook_report_syscall_entry/exit for ColdFire MMU ptrace path
  m68k: ColdFire V4e MMU context support code
  m68k: MMU enabled ColdFire needs 8k ELF alignment
  m68k: set ColdFire MMU page size
  m68k: define PAGE_OFFSET_RAW for ColdFire CPU with MMU enabled
  ...

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits)
  powerpc: fix compile error with 85xx/p1010rdb.c
  powerpc: fix compile error with 85xx/p1023_rds.c
  powerpc/fsl: add MSI support for the Freescale hypervisor
  arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree
  powerpc/fsl: Add support for Integrated Flash Controller
  powerpc/fsl: update compatiable on fsl 16550 uart nodes
  powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
  powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig
  powerpc/fsl: Update defconfigs to enable some standard FSL HW features
  powerpc: Add TBI PHY node to first MDIO bus
  sbc834x: put full compat string in board match check
  powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address
  powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit
  offb: Fix setting of the pseudo-palette for >8bpp
  offb: Add palette hack for qemu "standard vga" framebuffer
  offb: Fix bug in calculating requested vram size
  powerpc/boot: Change the WARN to INFO for boot wrapper overlap message
  powerpc/44x: Fix build error on currituck platform
  powerpc/boot: Change the load address for the wrapper to fit the kernel
  powerpc/44x: Enable CRASH_DUMP for 440x
  ...

Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to
the additional sparse-checking code for cputime_t.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1958 commits)
  net: pack skb_shared_info more efficiently
  net_sched: red: split red_parms into parms and vars
  net_sched: sfq: extend limits
  cnic: Improve error recovery on bnx2x devices
  cnic: Re-init dev->stats_addr after chip reset
  net_sched: Bug in netem reordering
  bna: fix sparse warnings/errors
  bna: make ethtool_ops and strings const
  xgmac: cleanups
  net: make ethtool_ops const
  vmxnet3" make ethtool ops const
  xen-netback: make ops structs const
  virtio_net: Pass gfp flags when allocating rx buffers.
  ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() call
  netdev: FCoE: Add new ndo_get_fcoe_hbainfo() call
  igb: reset PHY after recovering from PHY power down
  igb: add basic runtime PM support
  igb: Add support for byte queue limits.
  e1000: cleanup CE4100 MDIO registers access
  e1000: unmap ce4100_gbe_mdio_base_virt in e1000_remove
  ...

* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: add IRQ context simulation in module mce-inject
  x86, mce, therm_throt: Don't report power limit and package level thermal throttle events in mcelog
  x86, MCE: Drain mcelog buffer
  x86, mce: Add wrappers for registering on the decode chain

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Update copyrights
  x86, microcode, AMD: Exit early on success
  x86, microcode, AMD: Simplify ucode verification
  x86, microcode, AMD: Add a reusable buffer
  x86, microcode, AMD: Add a vendor-specific exit function

* 'x86-rdrand-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  random: Use arch_get_random_int instead of cycle counter if avail

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, centaur: Enable cx8 for VIA Eden too

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Use "do { } while(0)" for empty lock_cmos()/unlock_cmos() macros
  x86: Use "do { } while(0)" for empty flush_tlb_fix_spurious_fault() macro
  x86, CPU: Drop superfluous get_cpu_cap() prototype
  arch/x86/mm/pageattr.c: Quiet sparse noise; local functions should be static
  arch/x86/kernel/ptrace.c: Quiet sparse noise
  x86: Use kmemdup() in copy_thread(), rather than duplicating its implementation
  x86: Replace the EVT_TO_HPET_DEV() macro with an inline function

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86: Fix atomic64_xxx_cx8() functions
  x86: Fix and improve cmpxchg_double{,_local}()
  x86_64, asm: Optimise fls(), ffs() and fls64()
  x86, bitops: Move fls64.h inside __KERNEL__
  x86: Fix and improve percpu_cmpxchg{8,16}b_double()
  x86: Report cpb and eff_freq_ro flags correctly
  x86/i386: Use less assembly in strlen(), speed things up a bit
  x86: Use the same node_distance for 32 and 64-bit
  x86: Fix rflags in FAKE_STACK_FRAME
  x86: Clean up and extend do_int3()
  x86: Call do_notify_resume() with interrupts enabled
  x86/div64: Add a micro-optimization shortcut if base is power of two
  x86-64: Cleanup some assembly entry points
  x86-64: Slightly shorten line system call entry and exit paths
  x86-64: Reduce amount of redundant code generated for invalidate_interruptNN
  x86-64: Slightly shorten int_ret_from_sys_call
  x86, efi: Convert efi_phys_get_time() args to physical addresses
  x86: Default to vsyscall=emulate
  x86-64: Set siginfo and context on vsyscall emulation faults
  x86: consolidate xchg and xadd macros
  ...

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Skip cpus with apic-ids >= 255 in !x2apic_mode
  x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
  x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping
  x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present
  x86, apic: Add probe() for apic_flat
  x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
  x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
  x86: Add per-cpu stat counter for APIC ICR read tries
  pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86
  x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support
  x86: Add NumaChip support
  x86: Add x86_init platform override to fix up NUMA core numbering
  x86: Make flat_init_apic_ldr() available

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc: Skip TSC synchronization checks for tsc=reliable
  clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz
  clocksource: cris: Convert to clocksource_register_khz
  clocksource: xtensa: Convert to clocksource_register_hz/khz
  clocksource: um: Convert to clocksource_register_hz/khz
  clocksource: parisc: Convert to clocksource_register_hz/khz
  clocksource: m86k: Convert to clocksource_register_hz/khz
  time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from mach_timer.h
  time: x86: Remove CLOCK_TICK_RATE from tsc code
  time: Fix spelling mistakes in new comments
  time: fix bogus comment in timekeeping_get_ns_raw

This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Following should be fixed in your driver-core/driver-core-next.

From: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  sched/tracing: Add a new tracepoint for sleeptime
  sched: Disable scheduler warnings during oopses
  sched: Fix cgroup movement of waking process
  sched: Fix cgroup movement of newly created process
  sched: Fix cgroup movement of forking process
  sched: Remove cfs bandwidth period check in tg_set_cfs_period()
  sched: Fix load-balance lock-breaking
  sched: Replace all_pinned with a generic flags field
  sched: Only queue remote wakeups when crossing cache boundaries
  sched: Add missing rcu_dereference() around ->real_parent usage
  [S390] fix cputime overflow in uptime_proc_show
  [S390] cputime: add sparse checking and cleanup
  sched: Mark parent and real_parent as __rcu
  sched, nohz: Fix missing RCU read lock
  sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
  sched, nohz: Fix the idle cpu check in nohz_idle_balance
  sched: Use jump_labels for sched_feat
  sched/accounting: Fix parameter passing in task_group_account_field
  sched/accounting: Fix user/system tick double accounting
  sched/accounting: Re-use scheduler statistics for the root cgroup
  ...

Fix up conflicts in
 - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h
	usecs_to_cputime64() vs the sparse cleanups
 - kernel/sched/fair.c, kernel/time/tick-sched.c
	scheduler changes in multiple branches

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
  perf kvm: Fix copy & paste error in description
  perf script: Kill script_spec__delete
  perf top: Fix a memory leak
  perf stat: Introduce get_ratio_color() helper
  perf session: Remove impossible condition check
  perf tools: Fix feature-bits rework fallout, remove unused variable
  perf script: Add generic perl handler to process events
  perf tools: Use for_each_set_bit() to iterate over feature flags
  perf tools: Unify handling of features when writing feature section
  perf report: Accept fifos as input file
  perf tools: Moving code in some files
  perf tools: Fix out-of-bound access to struct perf_session
  perf tools: Continue processing header on unknown features
  perf tools: Improve macros for struct feature_ops
  perf: builtin-record: Document and check that mmap_pages must be a power of two.
  perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
  perf tools: Fix truncated annotation
  perf script: look up thread using tid instead of pid
  perf tools: Look up thread names for system wide profiling
  perf tools: Fix comm for processes with named threads
  ...

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  cpu: Export cpu_up()
  rcu: Apply ACCESS_ONCE() to rcu_boost() return value
  Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
  docs: Additional LWN links to RCU API
  rcu: Augment rcu_batch_end tracing for idle and callback state
  rcu: Add rcutorture tests for srcu_read_lock_raw()
  rcu: Make rcutorture test for hotpluggability before offlining CPUs
  driver-core/cpu: Expose hotpluggability to the rest of the kernel
  rcu: Remove redundant rcu_cpu_stall_suppress declaration
  rcu: Adaptive dyntick-idle preparation
  rcu: Keep invoking callbacks if CPU otherwise idle
  rcu: Irq nesting is always 0 on rcu_enter_idle_common
  rcu: Don't check irq nesting from rcu idle entry/exit
  rcu: Permit dyntick-idle with callbacks pending
  rcu: Document same-context read-side constraints
  rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
  rcu: Remove dynticks false positives and RCU failures
  rcu: Reduce latency of rcu_prepare_for_idle()
  rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
  rcu: Avoid needlessly IPIing CPUs at GP end
  ...

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  printk, lockdep: Switch to tracked irq ops
  printk, lockdep: Remove superfluous preempt_disable()
  printk, lockdep: Disable lock debugging on zap_locks()

* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  memblock: Reimplement memblock allocation using reverse free area iterator
  memblock: Kill early_node_map[]
  score: Use HAVE_MEMBLOCK_NODE_MAP
  s390: Use HAVE_MEMBLOCK_NODE_MAP
  mips: Use HAVE_MEMBLOCK_NODE_MAP
  ia64: Use HAVE_MEMBLOCK_NODE_MAP
  SuperH: Use HAVE_MEMBLOCK_NODE_MAP
  sparc: Use HAVE_MEMBLOCK_NODE_MAP
  powerpc: Use HAVE_MEMBLOCK_NODE_MAP
  memblock: Implement memblock_add_node()
  memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users
  memblock: Track total size of regions automatically
  powerpc: Cleanup memblock usage
  memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove()
  memblock: Make memblock functions handle overflowing range @size
  memblock: Reimplement __memblock_remove() using memblock_isolate_range()
  memblock: Separate out memblock_isolate_range() from memblock_set_node()
  memblock: Kill memblock_init()
  memblock: Kill sentinel entries at the end of static region arrays
  memblock: Add __memblock_dump_all()
  ...

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep/waitqueues: Add better annotation
  lockdep, bug: Exclude TAINT_OOT_MODULE from disabling lock debugging
  lockdep: Print lock name in lockdep_init_error()
  init/main.c: Execute lockdep_init() as early as possible
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  lockdep, rtmutex, bug: Show taint flags on error
  lockdep, bug: Exclude TAINT_FIRMWARE_WORKAROUND from disabling lockdep
  lockdep: Always try to set ->class_cache in register_lock_class() lockdep_init_map()

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Use debugobjects to catch deletion of uninitialized timers
  timer: Setup uninitialized timer with a stub callback
  debugobjects: Extend to assert that an object is initialized
  debugobjects: Be smarter about static objects

We're doing some odd things there, which already messes up various users
(see the net/socket.c code that this removes), and it was going to add
yet more crud to the block layer because of the incorrect error code
translation.

ENOIOCTLCMD is not an error return that should be returned to user mode
from the "ioctl()" system call, but it should *not* be translated as
EINVAL ("Invalid argument").  It should be translated as ENOTTY
("Inappropriate ioctl for device").

That EINVAL confusion has apparently so permeated some code that the
block layer actually checks for it, which is sad.  We continue to do so
for now, but add a big comment about how wrong that is, and we should
remove it entirely eventually.  In the meantime, this tries to keep the
changes localized to just the EINVAL -> ENOTTY fix, and removing code
that makes it harder to do the right thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nr_frags can be 8 bits since 256 is plenty of fragments. This allows it to be
packed with tx_flags.

Also by moving ip6_frag_id and dataref (both 4 bytes) next to each other we can
avoid a hole between ip6_frag_id and frag_list on 64 bit systems.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch splits the red_parms structure into two components.

One holding the RED 'constant' parameters, and one containing the
variables.

This permits a size reduction of GRED qdisc, and is a preliminary step
to add an optional RED unit to SFQ.

SFQRED will have a single red_parms structure shared by all flows, and a
private red_vars per flow.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Dave Taht <dave.taht@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SFQ as implemented in Linux is very limited, with at most 127 flows
and limit of 127 packets. [ So if 127 flows are active, we have one
packet per flow ]

This patch brings to SFQ following features to cope with modern needs.

- Ability to specify a smaller per flow limit of inflight packets.
    (default value being at 127 packets)

- Ability to have up to 65408 active flows (instead of 127)

- Ability to have head drops instead of tail drops
  (to drop old packets from a flow)

Example of use : No more than 20 packets per flow, max 8000 flows, max
20000 packets in SFQ qdisc, hash table of 65536 slots.

tc qdisc add ... sfq \
        flows 8000 \
        depth 20 \
        headdrop \
        limit 20000 \
	divisor 65536

Ram usage :

2 bytes per hash table entry (instead of previous 1 byte/entry)
32 bytes per flow on 64bit arches, instead of 384 for QFQ, so much
better cache hit ratio.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a bnx2x device encounters parity errors, it will not respond to all
SPQ messages.  As a result, the shutdown sequence before reset can take
a long time as the ulp drivers (bnx2i/bnx2fc) have to wait for timeout
of all such messages.

To improve this scenario, when bnx2x returns error on the SPQ, we'll send
an immediate response to the ulp drivers to avoid such lengthy timeouts.

Adjust the return code of relevant functions to return error only if
the message cannot be sent on the SPQ so that we'll generate an error
completion to the ulp drivers.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

because bnx2x frees the old and allocates new memory during chip reset.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Not now, but it looks you are correct. q->qdisc is NULL until another
additional qdisc is attached (beside tfifo). See 50612537.
The following patch should work.

From: Hagen Paul Pfeifer <hagen@jauu.net>

netem: catch NULL pointer by updating the real qdisc statistic
Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a several sparse warnings.
  * the __iomem tag was being used incorrectly (needs to be a prefix)
  * several variables should have been static since local to one file
  * the firmware was not being forwared declared
    and was const one place and not the other
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make local function static, make ethtool_ops const.
Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Auditing all usage of ethtool_ops found several drivers that
are not declaring the struct const when it should be.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All tables of function pointers should be const to make hacks
more difficult. Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

All tables of function pointers should be const to make hacks
more difficult. Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>