- 16 Oct, 2007 40 commits
-
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (264 commits) [ALSA] version 1.0.15 [ALSA] Fix thinko in cs4231 mce down check [ALSA] sun-cs4231: improved waiting after MCE down [ALSA] sun-cs4231: use cs4231-regs.h [ALSA] This simplifies and fixes waiting loops of the mce_down() [ALSA] This patch adds support for a wavetable chip on [ALSA] This patch removes open_mutex from the ad1848-lib as [ALSA] fix bootup crash in snd_gus_interrupt() [ALSA] hda-codec - Fix SKU ID function for realtek codecs [ALSA] Support ASUS P701 eeepc [0x1043 0x82a1] support [ALSA] hda-codec - Add array terminator for dmic in STAC codec [ALSA] hdsp - Fix zero division [ALSA] usb-audio - Fix double comment [ALSA] hda-codec - Fix STAC922x volume knob control [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz [ALSA] hda-codec - Fix for Fujitsu Lifebook C1410 [ALSA] mpu-401: remove MPU401_INFO_UART_ONLY flag [ALSA] mpu-401: do not require an ACK byte for the ENTER_UART command [ALSA] via82xx - Add DXS quirk for Shuttle AK31v2 [ALSA] hda-codec - Fix input_mux numbers for vaio stac92xx ...
-
git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits) Fix memory leak in dm-crypt SPARC64: sg chaining support SPARC: sg chaining support PPC: sg chaining support PS3: sg chaining support IA64: sg chaining support x86-64: enable sg chaining x86-64: update pci-gart iommu to sg helpers x86-64: update nommu to sg helpers x86-64: update calgary iommu to sg helpers swiotlb: sg chaining support i386: enable sg chaining i386 dma_map_sg: convert to using sg helpers mmc: need to zero sglist on init Panic in blk_rq_map_sg() from CCISS driver remove sglist_len remove blk_queue_max_phys_segments in libata revert sg segment size ifdefs Fixup u14-34f ENABLE_SG_CHAINING qla1280: enable use_sg_chaining option ...
-
Ingo Molnar authored
improve performance of sys_time(). sys_time() returns time in seconds, but it does so by calling do_gettimeofday() and then returning the tv_sec portion of the GTOD time. But the data structure "xtime", which is updated by every timer/scheduler tick, already offers HZ granularity time. the patch improves the sysbench oltp macrobenchmark by 4-5% on an AMD dual-core system: v2.6.23: #threads 1: transactions: 4073 (407.23 per sec.) 2: transactions: 8530 (852.81 per sec.) 3: transactions: 8321 (831.88 per sec.) 4: transactions: 8407 (840.58 per sec.) 5: transactions: 8070 (806.74 per sec.) v2.6.23 + sys_time-speedup.patch: 1: transactions: 4281 (428.09 per sec.) 2: transactions: 8910 (890.85 per sec.) 3: transactions: 8659 (865.79 per sec.) 4: transactions: 8676 (867.34 per sec.) 5: transactions: 8532 (852.91 per sec.) and by 4-5% on an Intel dual-core system too: 2.6.23: 1: transactions: 4560 (455.94 per sec.) 2: transactions: 10094 (1009.30 per sec.) 3: transactions: 9755 (975.36 per sec.) 4: transactions: 9859 (985.78 per sec.) 5: transactions: 9701 (969.72 per sec.) 2.6.23 + sys_time-speedup.patch: 1: transactions: 4779 (477.84 per sec.) 2: transactions: 10103 (1010.14 per sec.) 3: transactions: 10141 (1013.93 per sec.) 4: transactions: 10371 (1036.89 per sec.) 5: transactions: 10178 (1017.50 per sec.) (the more CPUs the system has, the more speedup this patch gives for this particular workload.) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mikael Pettersson authored
New URL due to local reorganization.
-
Roland McGrath authored
This cleans up the formatting in the vDSO linker script, mostly just the use of whitespace. It's intended to approximate the kernel standard conventions for indenting C, treating elements of the linker script about like initialized variable definitions. Signed-off-by:
Roland McGrath <roland@redhat.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Roland McGrath authored
This cleans up the formatting in the vDSO linker script, mostly just the use of whitespace. It's intended to approximate the kernel standard conventions for indenting C, treating elements of the linker script about like initialized variable definitions. Signed-off-by:
-
Roland McGrath authored
This cleans up the formatting in the vDSO linker script, mostly just the use of whitespace. It's intended to approximate the kernel standard conventions for indenting C, treating elements of the linker script about like initialized variable definitions. Signed-off-by:
-
Roland McGrath authored
This cleans up the formatting in the vDSO linker script, mostly just the use of whitespace. It's intended to approximate the kernel standard conventions for indenting C, treating elements of the linker script about like initialized variable definitions. Signed-off-by:
-
Peter Zijlstra authored
A slight oversight tripped lockdep debugging code, each lockdep class should have but a single init site. Rearange the code to make this true. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Boaz Harrosh authored
- Previese patch to NCR5380 broke scsi_mac because AUTOSENSE was defined after the inclusion of NCR5380.h. Fix it Signed-off-by:Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Andrew Morton authored
sparc64: net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 3) net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 4) Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "David S. Miller" <davem@davemloft.net> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Maciej W. Rozycki authored
There is a test in tgafb_mono_imageblit() for a colour image with a fall-back to cfb_imageblit(). The test is not necessary as the only caller, which is tgafb_imageblit(), checks it too and only invokes this function for monochrome images. It looks like a left-over from before some changes to tgafb_imageblit(). Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: Antonino Daplas <adaplas@pol.net> Cc: Jay Estabrook <Jay.Estabrook@hp.com> Signed-off-by:
-
Maciej W. Rozycki authored
The pixel mask calculation in tgafb_mono_imageblit() uses a variable left-shift on a 32-bit data type by up to 32. Shifting by the width of a data type or more produces an unpredictable result according to the C standard. Rather than widening the data type this fix makes sure the count is between 0 and 31. The reason is not to penalise 32-bit platforms with operation on a "long long" type for a marginal case that is meant not to happen (blitting an image of a zero width). The reason it has escaped for so long is the Alpha, being purely 64-bit, :-) does not mask the shift out to 32 bits. This is a valid implementation -- producing the correct result certainly falls within "unpredictable behaviour". It does trigger on MIPS though and it is the recent merge of the TC support which only enabled the driver for use on anything other than the Alpha. For MIPS when the width is 32 the mask ends up being 0 rather than 0xffffffff as it should be and the frame buffer is not updated. Signed-off-by:
-
Antonino Daplas authored
As reported in Bugzilla Bug 9093, upon switching to X, a small rectangular cursor can still be seen blinking in the upper left part of the screen. It is fbcon's text cursor. This is caused by a strange ioctl(..., KDSETMODE, KD_TEXT) call done by something in userspace, perhaps by X itself, while the tty is still in graphics mode. And when the tty is in KD_TEXT mode, the cursor timer is restarted. Although this is a userspace problem, we can work around it by delaying the restart of the cursor timer until an fbcon_switch() is called. In other words, the cursor timer will not be restarted even if a KD_TEXT mode switch is requested. Regression potential: Present but low Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Pavel Pisa authored
This correct case, when source and destination X coordinates difference is n multiple of pixels in byte. This is probably rare case, but this case should supported for completeness. Reorganization of FB_READL and FB_WRITEL calls results in code size decrease for normal build without swapping support and size with support enabled is reasonable too. [adaplas] Add missing fb_rev_pixels_in_long() prototype. Signed-off-by:
Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by:
-
Krzysztof Helt authored
This patch adds check if selected pixclock is valid (is in the PLL range). Previously, if the pixclock could not be set, the new mode resolution was set but pixclock was not set which led to incorrect timings sent to monitor. [adaplas] Fixed a few misplaced curly braces. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Ondrej Zajicek authored
This patch changes mode selection matching algorithm. It allows to choose mode with matching depth even when requested color lengths are greater than color lengths of every mode with requested color depth. It also fixes bug in s3fb - wrong error value returned when format is not supported by chip. Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
Geert Uytterhoeven authored
Default to the 480p video mode on DVI-D and HDMI displays if `video=safe' is passed on the kernel command line. This is intended to be used by `kboot'-style boot loaders (i.e. first-stage kernels) for the PS3, to provide a failsafe video mode. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Geert Uytterhoeven authored
Move the extern declaration for global_mode_option to <linux/fb.h> and rename the variable to fb_mode_option. Signed-off-by:
-
Geert Uytterhoeven authored
ps3fb: Enhance horizontal panning on firmware 1.90 and up: - On firmware 1.90 and up, L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT supports copying rectangles from XDR to DDR memory with different source and destination line lengths. Hence larger horizontal virtual resolutions can be supported (up to 16368 pixels). - As the actual frame buffer memory layout no longer matches the entries in ps3fb_res[], create fake struct ps3fb_ioctl_res data for the PS3FB_IOCTL_SCREENINFO ioctl, so user space applications that depend on it keep on working. Signed-off-by: -
Geert Uytterhoeven authored
ps3fb: Add virtual screen and panning support: - The vertical virtual screen size is limited by the amount of memory reserved for ps3fb, - The horizontal virtual screen size is limited to the fullscreen width, - Advertise that we support panning, so fbcon will use it if the virtual screen is enabled. Enabling a virtual screen (using `fbset -vyres nnn') can speed up text console scrolling by a factor of 10-15, depending on the video mode. Signed-off-by: -
Geert Uytterhoeven authored
Don't keep the borders for non-fullscreen modes in XDR memory: - Extract ps3fb_sync_image() - Work around the alignment restrictions of L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT by using an offset with L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP - Only copy the visible part of the screen on every vblank - Always put the real frame buffer at the start of video memory - Clear fullscreen DDR memory on mode change Signed-off-by: -
Geert Uytterhoeven authored
ps3fb: Use fb_info.par properly: o Move mode-specific fields into struct ps3fb_par o Allocate struct ps3fb_par using framebuffer_alloc() o Protect access to ps3fb_par in ps3fb_sync() using the console semaphore (this semaphore is already held when ps3fb_set_par() is called) o Avoid calling ps3av_set_video_mode() if the actual video mode hasn't changed Signed-off-by: -
Geert Uytterhoeven authored
ps3fb: In the case of non-fullscreen video modes, there was a partial overlap of the GPU command buffer and the frame buffer. Fix and cleanup various issues with overlap and alignment: - Move the GPU command buffer from the beginning to the end of video memory - Exclude the GPU command buffer from the actual frame buffer memory - Align the start of the virtual frame buffer to PAGE_SIZE instead of to 64 KiB, and don't waste memory if it's already aligned (for fullscreen modes) - Take into account the alignment when checking memory requirements and maximum number of frames - Make sure fb_fix_screeninfo.smem_start always points to the virtual frame buffer start, so we don't have to compensate for that in ps3fb_mmap() Signed-off-by: -
Geert Uytterhoeven authored
Make ps3fb_wait_for_vsync() and ps3fb_flip_ctl() static, as they're no (longer) used outside ps3fb. Signed-off-by:
-
Geert Uytterhoeven authored
Clean up includes Signed-off-by:
-
Geert Uytterhoeven authored
Do not print warnings on invalid frame numbers, as this can be triggered from user space. Signed-off-by:
-
Geert Uytterhoeven authored
Convert ps3fb from printk()/DPRINTK() to dev_*()/pr_*() Signed-off-by:
-
Pavel Pisa authored
The i.MX frame-buffer read operation should be faster for all configurations then drawing each individual character again in response to scroll events. The nonstandard fields allows to configure frame-buffer special options flags for different display configurations by board specific initialization code. One of such specific options is reversed order of pixels in each individual byte. i.MX frame-buffer seems to be designed for big-endian use first. The byte order is correctly configured for little-endian ordering, but if 1, 2 or 4 bits per pixel are used, pixels ordering is incompatible to Linux generic frame-buffer drawing functions. The patch "Allow generic BitBLT functions to work with swapped pixel order in bytes" introduces required functionality into FBDEV core. The pixels ordering selection has to be enabled at compile time CONFIG_FB_CFB_REV_PIXELS_IN_BYTE and for each display configuration which requires it by flag FB_NONSTD_REV_PIX_IN_B in "nonstd" field of info structure. This patch provides way for board specific code to select this option. Signed-off-by:
-
Geert Uytterhoeven authored
don't distinguish between `boot' and `non-boot' autodetection now the autodetection code has been improved Signed-off-by:
-
Geert Uytterhoeven authored
remove unused ps3av_set_mode() Signed-off-by:
-
Geert Uytterhoeven authored
add a quirk database for broken monitors where the `best' advertised video mode doesn't work Signed-off-by:
-
Geert Uytterhoeven authored
add autodetection for VESA modes Signed-off-by:
-
Geert Uytterhoeven authored
treat DVI-D monitors like HDMI monitors when autodetecting the best video mode Signed-off-by:
-
Geert Uytterhoeven authored
It doesn't make much sense to use the PS3AV_CMD_VIDEO_VID_* values in the autodetection code, just to convert them to PS3 video mode ids afterwards. Signed-off-by:
-
Geert Uytterhoeven authored
ps3av: eliminate PS3AV_DEBUG - Move ps3av_cmd_av_monitor_info_dump from ps3av_cmd.c to ps3av.c, as it's used there only - Integrate ps3av_cmd_av_hw_conf_dump() into its sole user - Use pr_debug() for printing debug info Signed-off-by: -
Geert Uytterhoeven authored
ps3av: eliminate unneeded temporary variables Signed-off-by:
-
Randy Dunlap authored
Move AGP and DRM menus into the video graphics support menu. They use 'menuconfig' so that they can all be disabled with one selection. Make the console menu use 'menuconfig' so that it can all be disabled with one selection. Make the frame buffer menu use 'menuconfig' so that it can all be disabled with one selection. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Michael Hennerich authored
Blackfin BF54x framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD [adaplas] Add 'fb' suffix to driver name. Move Makefile entry under platform device section Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Randy Dunlap authored
Add logo.nologo kernel boot option to disable the logo in order to provide more screen space for kernel messages; especially useful when debugging and screen space is more critical. newport_con driver changes are untested. [akpm@linux-foundation.org: cleanups, coding-style fixes] Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
