- 21 Jan, 2014 1 commit
-
-
Joe Thornber authored
This bug was introduced in commit 7e664b3d ("dm space map metadata: fix extending the space map"). When extending a dm-thin metadata volume we: - Switch the space map into a simple bootstrap mode, which allocates all space linearly from the newly added space. - Add new bitmap entries for the new space - Increment the reference counts for those newly allocated bitmap entries - Commit changes to disk - Switch back out of bootstrap mode. But, the disk commit may allocate space itself, if so this fact will be lost when switching out of bootstrap mode. The bug exhibited itself as an error when the bitmap_root, with an erroneous ref count of 0, was subsequently decremented as part of a later disk commit. This would cause the disk commit to fail, and thinp to enter read_only mode. The metadata was not damaged (thin_check passed). The fix is to put the increments + commit into a loop, running until the commit has not allocated extra space. In practise this loop only runs twice. With this fix the following device mapper testsuite test passes: dmtest run --suite thin-provisioning -n thin_remove_works_after_resize Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # depends on commit 7e664b3d
-
- 16 Jan, 2014 2 commits
-
-
Mike Snitzer authored
The cache's policy may have been established using the "default" alias, which is currently the "mq" policy but the default policy may change in the future. It is useful to know exactly which policy is being used. Add a 'real' member to the dm_cache_policy_type structure and have the "default" dm_cache_policy_type point to the real "mq" dm_cache_policy_type. Update dm_cache_policy_get_name() to check if real is set, if so report the name of the real policy (not the alias). Requested-by:
Jonathan Brassow <jbrassow@redhat.com> Signed-off-by:
-
Mike Snitzer authored
Commit 787a996c ("dm thin: add error_if_no_space feature") mistakenly forgot to increase the number of feature args supported. Signed-off-by:
-
- 15 Jan, 2014 3 commits
-
-
Mikulas Patocka authored
This reverts commit be35f486 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
This patch modifies dm-snapshot so that it prefetches the buffers when loading the exceptions. The number of buffers read ahead is specified in the DM_PREFETCH_CHUNKS macro. The current value for DM_PREFETCH_CHUNKS (12) was found to provide the best performance on a single 15k SCSI spindle. In the future we may modify this default or make it configurable. Also, introduce the function dm_bufio_set_minimum_buffers to setup bufio's number of internal buffers before freeing happens. dm-bufio may hold more buffers if enough memory is available. There is no guarantee that the specified number of buffers will be available - if you need a guarantee, use the argument reserved_buffers for dm_bufio_client_create. Signed-off-by:
-
Mikulas Patocka authored
Use dm-bufio for initial loading of the exceptions. Introduce a new function dm_bufio_forget that frees the given buffer. Signed-off-by:
-
- 14 Jan, 2014 2 commits
-
-
Mikulas Patocka authored
Change the functions get_exception, read_exception and insert_exceptions so that ps->area is passed as an argument. This patch doesn't change any functionality, but it refactors the code to allow for a cleaner switch over to using dm-bufio. Signed-off-by:
-
Mikulas Patocka authored
The list of initial exceptions is loaded in the target constructor. We are allowed to allocate memory with GFP_KERNEL at this point. So, change alloc_completed_exception to use GFP_KERNEL when being called from the constructor. Signed-off-by:
-
- 10 Jan, 2014 1 commit
-
-
Mike Snitzer authored
Improve cache_status to emit: <metadata block size> <#used metadata blocks>/<#total metadata blocks> <cache block size> <#used cache blocks>/<#total cache blocks> ... Adding the block sizes allows for easier calculation of the overall size of both the metadata and cache devices. Adding <#total cache blocks> provides useful context for how much of the cache is used. Unfortunately these additions to the status will require updates to users' scripts that monitor the cache status. But these changes help provide more comprehensive information about the cache device and will simplify tools that are being developed to manage dm-cache devices -- because they won't need to issue 3 operations to cobble together the information that we can easily provide via a single status ioctl. While updating the status documentation in cache.txt spaces were tabify'd. Requested-by:
-
- 09 Jan, 2014 1 commit
-
-
Joe Thornber authored
dm_btree_find_lowest_key is the reciprocal of dm_btree_find_highest_key. Factor out common code for dm_btree_find_{highest,lowest}_key. dm_btree_find_lowest_key is needed for an upcoming DM target, as such it is best to get this interface in place. Signed-off-by:
-
- 08 Jan, 2014 3 commits
-
-
Joe Thornber authored
When extending a metadata space map we should do the first commit whilst still in bootstrap mode -- a mode where all blocks get allocated in the new area. That way the commit overhead is allocated from the newly added space. Otherwise we risk running out of space. With this fix, and the previous commit "dm space map common: make sure new space is used during extend", the following device mapper testsuite test passes: dmtest run --suite thin-provisioning -n /resize_metadata_no_io/ Signed-off-by:
-
Joe Thornber authored
When extending a low level space map we should update nr_blocks at the start so the new space is used for the index entries. Otherwise extend can fail, e.g.: sm_metadata_extend call sequence that fails: -> sm_ll_extend -> dm_tm_new_block -> dm_sm_new_block -> sm_bootstrap_new_block => returns -ENOSPC because smm->begin == smm->ll.nr_blocks Signed-off-by: -
Mikulas Patocka authored
There may be other parts of the kernel holding a reference on the dm kobject. We must wait until all references are dropped before deallocating the mapped_device structure. The dm_kobject_release method signals that all references are dropped via completion. But dm_kobject_release doesn't free the kobject (which is embedded in the mapped_device structure). This is the sequence of operations: * when destroying a DM device, call kobject_put from dm_sysfs_exit * wait until all users stop using the kobject, when it happens the release method is called * the release method signals the completion and should return without delay * the dm device removal code that waits on the completion continues * the dm device removal code drops the dm_mod reference the device had * the dm device removal code frees the mapped_device structure that contains the kobject Using kobject this way should avoid the module unload race that was mentioned at the beginning of this thread: https://lkml.org/lkml/2014/1/4/83Signed-off-by:
-
- 07 Jan, 2014 21 commits
-
-
Mikulas Patocka authored
The comparison is always true and the compiler optimizes it out anyway. Milan offered additional context relative to the original commit 784aae73 ("dm: add name and uuid to sysfs") which introduced the code: "I think it is just relict of some experiments before I committed this simple embedded sysfs kobj handling". Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
-
Chuansheng Liu authored
In case CONFIG_DEBUG_OBJECTS_WORK is defined, it is needed to call destroy_work_on_stack() which frees the debug object to pair with INIT_WORK_ONSTACK(). Signed-off-by:
Liu, Chuansheng <chuansheng.liu@intel.com> Signed-off-by:
-
Joe Thornber authored
Internally the mq policy maintains a promotion threshold variable. If the hit count of a block not in the cache goes above this threshold it gets promoted to the cache. This patch introduces three new tunables that allow you to tweak the promotion threshold by adding a small value. These adjustments depend on the io type: read_promote_adjustment: READ io, default 4 write_promote_adjustment: WRITE io, default 8 discard_promote_adjustment: READ/WRITE io to a discarded block, default 1 If you're trying to quickly warm a new cache device you may wish to reduce these to encourage promotion. Remember to switch them back to their defaults after the cache fills though. Signed-off-by:
-
Wei Yongjun authored
Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
-
Mike Snitzer authored
The pool mode must not be switched until after the corresponding pool process_* methods have been established. Otherwise, because set_pool_mode() isn't interlocked with the IO path for performance reasons, the IO path can end up executing process_* operations that don't match the mode. This patch eliminates problems like the following (as seen on really fast PCIe SSD storage when transitioning the pool's mode from PM_READ_ONLY to PM_WRITE): kernel: device-mapper: thin: 253:2: reached low water mark for data device: sending event. kernel: device-mapper: thin: 253:2: no free data space available. kernel: device-mapper: thin: 253:2: switching pool to read-only mode kernel: device-mapper: thin: 253:2: switching pool to write mode kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 11 PID: 7564 at drivers/md/dm-thin.c:995 handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]() ... kernel: Workqueue: dm-thin do_worker [dm_thin_pool] kernel: 00000000000003e3 ffff880308831cc8 ffffffff8152ebcb 00000000000003e3 kernel: 0000000000000000 ffff880308831d08 ffffffff8104c46c ffff88032502a800 kernel: ffff880036409000 ffff88030ec7ce00 0000000000000001 00000000ffffffc3 kernel: Call Trace: kernel: [<ffffffff8152ebcb>] dump_stack+0x49/0x5e kernel: [<ffffffff8104c46c>] warn_slowpath_common+0x8c/0xc0 kernel: [<ffffffff8104c4ba>] warn_slowpath_null+0x1a/0x20 kernel: [<ffffffffa001e2c6>] handle_unserviceable_bio+0x146/0x160 [dm_thin_pool] kernel: [<ffffffffa001f276>] process_bio_read_only+0x136/0x180 [dm_thin_pool] kernel: [<ffffffffa0020b75>] process_deferred_bios+0xc5/0x230 [dm_thin_pool] kernel: [<ffffffffa0020d31>] do_worker+0x51/0x60 [dm_thin_pool] kernel: [<ffffffff81067823>] process_one_work+0x183/0x490 kernel: [<ffffffff81068c70>] worker_thread+0x120/0x3a0 kernel: [<ffffffff81068b50>] ? manage_workers+0x160/0x160 kernel: [<ffffffff8106e86e>] kthread+0xce/0xf0 kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70 kernel: [<ffffffff8153b3ec>] ret_from_fork+0x7c/0xb0 kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70 kernel: ---[ end trace 3f00528e08ffa55c ]--- kernel: device-mapper: thin: pool mode is PM_WRITE not PM_READ_ONLY like expected!? dm-thin.c:995 was the WARN_ON_ONCE(get_pool_mode(pool) != PM_READ_ONLY); at the top of handle_unserviceable_bio(). And as the additional debugging I had conveys: the pool mode was _not_ PM_READ_ONLY like expected, it was already PM_WRITE, yet pool->process_bio was still set to process_bio_read_only(). Also, while fixing this up, reduce logging of redundant pool mode transitions by checking new_mode is different from old_mode. Signed-off-by: -
Mike Snitzer authored
The pool's error_if_no_space flag can easily serve the same purpose that no_free_space did, namely: control whether handle_unserviceable_bio() will error a bio or requeue it. This is cleaner since error_if_no_space is established when the pool's features are processed during table load. So it avoids managing the no_free_space flag by taking the pool's spinlock. Signed-off-by: -
Mike Snitzer authored
If the pool runs out of data or metadata space, the pool can either queue or error the IO destined to the data device. The default is to queue the IO until more space is added. An admin may now configure the pool to error IO when no space is available by setting the 'error_if_no_space' feature when loading the thin-pool table. Signed-off-by:
-
Mike Snitzer authored
Now that we switch the pool to read-only mode when the data device runs out of space it causes active writers to get IO errors once we resume after resizing the data device. If no_free_space is set, save bios to the 'retry_on_resume_list' and requeue them on resume (once the data or metadata device may have been resized). With this patch the resize_io test passes again (on slower storage): dmtest run --suite thin-provisioning -n /resize_io/ Later patches fix some subtle races associated with the pool mode transitions done as part of the pool's -ENOSPC handling. These races are exposed on fast storage (e.g. PCIe SSD). Signed-off-by:
-
Mike Snitzer authored
Factor out_of_data_space() out of alloc_data_block(). Eliminate the use of 'no_free_space' as a latch in alloc_data_block() -- this is no longer needed now that we switch to read-only mode when we run out of data or metadata space. In a later patch, the 'no_free_space' flag will be eliminated entirely (in favor of checking metadata rather than relying on a transient flag). Move no metdata space handling into metdata_operation_failed(). Set no_free_space when metadata space is exhausted too. This is useful, because it offers consistency, for the following patch that will requeue data IOs if no_free_space. Also, rename no_space() to retry_bios_on_resume(). Signed-off-by:
-
Mike Snitzer authored
Signed-off-by:
-
Joe Thornber authored
Introduce metadata_operation_failed() wrappers, around set_pool_mode(), to assist with improving the consistency of how metadata failures are handled. Logging is improved and metadata operation failures trigger read-only mode immediately. Also, eliminate redundant set_pool_mode() calls in the two alloc_data_block() caller's error paths. Signed-off-by:
-
Joe Thornber authored
Factor check_low_water_mark() out of alloc_data_block(). Change a couple unsigned flags in the pool structure to bool. Signed-off-by:
-
Mike Snitzer authored
Mappings could be processed in descending logical block order, particularly if buffered IO is used. This could adversely affect the latency of IO processing. Fix this by adding mappings to the end of the 'prepared_mappings' and 'prepared_discards' lists. Signed-off-by:
-
Joe Thornber authored
Signed-off-by:
-
Mike Snitzer authored
Also, move 'err' member in dm_thin_new_mapping structure to eliminate 4 byte hole (reduces size from 88 bytes to 80). Signed-off-by:
-
Mike Snitzer authored
DM's persistent-data library is now used my multiple targets so exclusive references to "pool" or "thin provisioning" need to be cleaned up. Adjust Kconfig's DM_DEBUG_BLOCK_STACK_TRACING text and remove "pool" from a block manager error message. Signed-off-by:
-
Mike Snitzer authored
The "unable to allocate new metadata block" error can be a particularly verbose error if there is a systemic issue with the metadata device. Signed-off-by:
-
Mikulas Patocka authored
Starting with commit c0820cf5 ("dm: introduce per_bio_data"), device mapper has the capability to pre-allocate a target-specific structure with the bio. This patch changes dm-delay to use this facility instead of a slab cache and mempool. Signed-off-by:
-
Mikulas Patocka authored
A device mapper table is allocated in the following way: * The function dm_table_create is called, it gets the number of targets as an argument -- it allocates a targets array accordingly. * For each target, we call dm_table_add_target. If we add more targets than were specified in dm_table_create, the function dm_table_add_target reallocates the targets array. However, this reallocation code is wrong - it moves the targets array to a new location, while some target constructors hold pointers to the array in the old location. The following DM target drivers save the pointer to the target structure, so they corrupt memory if the target array is moved: multipath, raid, mirror, snapshot, stripe, switch, thin, verity. Under normal circumstances, the reallocation function is not called (because dm_table_create is called with the correct number of targets), so the buggy reallocation code is not used. Prior to the fix "dm table: fail dm_table_create on dm_round_up overflow", the reallocation code could only be used in case the user specifies too large a value in param->target_count, such as 0xffffffff. Signed-off-by:
-
Joe Thornber authored
If a snapshot is created and later deleted the origin dm_thin_device's snapshotted_time will have been updated to reflect the snapshot's creation time. The 'shared' flag in the dm_thin_lookup_result struct returned from dm_thin_find_block() is an approximation based on snapshotted_time -- this is done to avoid 0(n), or worse, time complexity. In this case, the shared flag would be true. But because the 'shared' flag reflects an approximation a block can be incorrectly assumed to be shared (e.g. false positive for 'shared' because the snapshot no longer exists). This could result in discards issued to a thin device not being passed down to the pool's underlying data device. To fix this we double check that a thin block is really still in-use after a mapping is removed using dm_pool_block_is_used(). If the reference count for a block is now zero the discard is allowed to be passed down. Also add a 'definitely_not_shared' member to the dm_thin_new_mapping structure -- reflects that the 'shared' flag in the response from dm_thin_find_block() can only be held as definitive if false is returned. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1043527Signed-off-by:
-
Mike Snitzer authored
As additional members are added to the dm_thin_new_mapping structure care should be taken to make sure they get initialized before use. Signed-off-by:
-
- 15 Dec, 2013 6 commits
-
-
Linus Torvalds authored
-
Matias Bjorling authored
For NUMA systems, initializing the blk-mq layer and using per node hctx. We initialize submit queues to 1, while blk-mq nr_hw_queues is initialized to the number of NUMA nodes. This makes the null_init_hctx function overwrite memory outside of what it allocated. In my case it lead to writing garbage into struct request_queue's mq_map. Signed-off-by:
Matias Bjorling <m@bjorling.me> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Sergey Senozhatsky authored
Since commit ec39f64b ("drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups") radeon_hwmon_init() is using hwmon_device_register_with_groups(), which sets `rdev' as a device private driver_data, while hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'. Fix them by using dev_get_drvdata(), in order to avoid this oops: BUG: unable to handle kernel paging request at 0000000000001e28 IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon] PGD 15057e067 PUD 151a8e067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Call Trace: internal_create_group+0x114/0x1d9 sysfs_create_group+0xe/0x10 sysfs_create_groups+0x22/0x5f device_add+0x34f/0x501 device_register+0x15/0x18 hwmon_device_register_with_groups+0xb5/0xed radeon_hwmon_init+0x56/0x7c [radeon] radeon_pm_init+0x134/0x7e5 [radeon] radeon_modeset_init+0x75f/0x8ed [radeon] radeon_driver_load_kms+0xc6/0x187 [radeon] drm_dev_register+0xf9/0x1b4 [drm] drm_get_pci_dev+0x98/0x129 [drm] radeon_pci_probe+0xa3/0xac [radeon] pci_device_probe+0x6e/0xcf driver_probe_device+0x98/0x1c4 __driver_attach+0x5c/0x7e bus_for_each_dev+0x7b/0x85 driver_attach+0x19/0x1b bus_add_driver+0x104/0x1ce driver_register+0x89/0xc5 __pci_register_driver+0x58/0x5b drm_pci_init+0x86/0xea [drm] radeon_init+0x97/0x1000 [radeon] do_one_initcall+0x7f/0x117 load_module+0x1583/0x1bb4 SyS_init_module+0xa0/0xaf Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't figure out why it breaks things. 2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it was basically doing "x == x", from Dave Jones. 3) Freescale FEC driver was DMA mapping the wrong number of bytes, from Sebastian Siewior. 4) Blackhole and prohibit routes in ipv6 were not doing the right thing because their ->input and ->output methods were not being assigned correctly. Now they behave properly like their ipv4 counterparts. From Kamala R. 5) Several drivers advertise the NETIF_F_FRAGLIST capability, but really do not support this feature and will send garbage packets if fed fraglist SKBs. From Eric Dumazet. 6) Fix long standing user triggerable BUG_ON over loopback in RDS protocol stack, from Venkat Venkatsubra. 7) Several not so common code paths can potentially try to invoke packet scheduler actions that might be NULL without checking. Shore things up by either 1) defining a method as mandatory and erroring on registration if that method is NULL 2) defininig a method as optional and the registration function hooks up a default implementation when NULL is seen. From Jamal Hadi Salim. 8) Fix fragment detection in xen-natback driver, from Paul Durrant. 9) Kill dangling enter_memory_pressure method in cg_proto ops, from Eric W Biederman. 10) SKBs that traverse namespaces should have their local_df cleared, from Hannes Frederic Sowa. 11) IOCB file position is not being updated by macvtap_aio_read() and tun_chr_aio_read(). From Zhi Yong Wu. 12) Don't free virtio_net netdev before releasing all of the NAPI instances. From Andrey Vagin. 13) Procfs entry leak in xt_hashlimit, from Sergey Popovich. 14) IPv6 routes that are no cached routes should not count against the garbage collection limits. We had this almost right, but were missing handling addrconf generated routes properly. From Hannes Frederic Sowa. 15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL route info when they are called, from Stefan Tomanek. 16) TUN and MACVTAP have had truncated packet signalling for some time, fix from Jason Wang. 17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet. 18) xen-netback does not interpret the NAPI budget properly for TX work, fix from Paul Durrant. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits) igb: Fix for issue where values could be too high for udelay function. i40e: fix null dereference xen-netback: fix gso_prefix check net: make neigh_priv_len in struct net_device 16bit instead of 8bit drivers: net: cpsw: fix for cpsw crash when build as modules xen-netback: napi: don't prematurely request a tx event xen-netback: napi: fix abuse of budget sch_tbf: use do_div() for 64-bit divide udp: ipv4: must add synchronization in udp_sk_rx_dst_set() net:fec: remove duplicate lines in comment about errata ERR006358 Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature" 8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature xen-netback: make sure skb linear area covers checksum field net: smc91x: Fix device tree based configuration so it's usable udp: ipv4: fix potential use after free in udp_v4_early_demux() macvtap: signal truncated packets tun: unbreak truncated packet signalling net: sched: htb: fix the calculation of quantum net: sched: tbf: fix the calculation of max_size micrel: add support for KSZ8041RNLI ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Peter Anvin: "This is a pretty small batch: The biggest single change is to stop using EFI time services on 32-bit platforms. This matches our current behavior on 64-bit platforms as we already had ruled them out there as being too unreliable. Turns out that affects 32-bit platforms, too. One NULL pointer fix for SGI UV. Two minor build fixes, one of which only affects icc and the other which affects icc and future versions or nonstandard default settings of gcc" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: Don't use (U)EFI time services on 32 bit x86, build, icc: Remove uninitialized_var() from compiler-intel.h x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used x86, build: Pass in additional -mno-mmx, -mno-sse options
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: "PCI device hotplug - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael Wysocki) Host bridge drivers - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn Helgaas) - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin (Jason Gunthorpe) Miscellaneous - Avoid unnecessary CPU switch when calling .probe() (Alexander Duyck) - Revert "workqueue: allow work_on_cpu() to be called recursively" (Bjorn Helgaas) - Disable Bus Master only on kexec reboot (Khalid Aziz) - Omit PCI ID macro strings to shorten quirk names for LTO (Michal Marek)" * tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers PCI: Disable Bus Master only on kexec reboot PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin PCI: Omit PCI ID macro strings to shorten quirk names PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev() Revert "workqueue: allow work_on_cpu() to be called recursively" PCI: Avoid unnecessary CPU switch when calling driver .probe() method
-
