This patch wires up the new syscall sys_bpf() on powerpc.

Passes the tests in samples/bpf:

    #0 add+sub+mul OK
    #1 unreachable OK
    #2 unreachable2 OK
    #3 out of range jump OK
    #4 out of range jump2 OK
    #5 test1 ld_imm64 OK
    #6 test2 ld_imm64 OK
    #7 test3 ld_imm64 OK
    #8 test4 ld_imm64 OK
    #9 test5 ld_imm64 OK
    #10 no bpf_exit OK
    #11 loop (back-edge) OK
    #12 loop2 (back-edge) OK
    #13 conditional loop OK
    #14 read uninitialized register OK
    #15 read invalid register OK
    #16 program doesn't init R0 before exit OK
    #17 stack out of bounds OK
    #18 invalid call insn1 OK
    #19 invalid call insn2 OK
    #20 invalid function call OK
    #21 uninitialized stack1 OK
    #22 uninitialized stack2 OK
    #23 check valid spill/fill OK
    #24 check corrupted spill/fill OK
    #25 invalid src register in STX OK
    #26 invalid dst register in STX OK
    #27 invalid dst register in ST OK
    #28 invalid src register in LDX OK
    #29 invalid dst register in LDX OK
    #30 junk insn OK
    #31 junk insn2 OK
    #32 junk insn3 OK
    #33 junk insn4 OK
    #34 junk insn5 OK
    #35 misaligned read from stack OK
    #36 invalid map_fd for function call OK
    #37 don't check return value before access OK
    #38 access memory with incorrect alignment OK
    #39 sometimes access memory with incorrect alignment OK
    #40 jump test 1 OK
    #41 jump test 2 OK
    #42 jump test 3 OK
    #43 jump test 4 OK
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
[mpe: test using samples/bpf]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Change maintainer of nx-842 compression coprocessor driver
to Dan Streetman.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Remove the check of CONFIG_PPC_SUBPAGE_PROT when deciding if
is_hugepage_only_range() is extern or inline. The extern version is in
slice.c and is built if CONFIG_PPC_MM_SLICES=y.

There was no build break possible because CONFIG_PPC_SUBPAGE_PROT is
only selectable under conditions which also mean CONFIG_PPC_MM_SLICES
will be selected.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

arch/powerpc/mm/slice.c:704:5: error: expected identifier or ‘(’ before numeric constant
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
     ^
make[1]: *** [arch/powerpc/mm/slice.o] Error 1
make: *** [arch/powerpc/mm/slice.o] Error 2

This got introduced via 1217d34b
"powerpc: Ensure global functions include their prototype". We
started including linux/hugetlb.h with that patch and now we have

 #define is_hugepage_only_range(mm, addr, len)	0

with hugetlbfs disabled.

Fixes: 1217d34b ("powerpc: Ensure global functions include their prototype")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull SCSI target updates from Nicholas Bellinger:
 "Here are the target updates for v3.18-rc2 code.  These where
  originally destined for -rc1, but due to the combination of travel
  last week for KVM Forum and my mistake of taking the three week merge
  window literally, the pull request slipped..  Apologies for that.

  Things where reasonably quiet this round.  The highlights include:

   - New userspace backend driver (target_core_user.ko) by Shaohua Li
     and Andy Grover
   - A number of cleanups in target, iscsi-taret and qla_target code
     from Joern Engel
   - Fix an OOPs related to queue full handling with CHECK_CONDITION
     status from Quinn Tran
   - Fix to disable TX completion interrupt coalescing in iser-target,
     that was causing problems on some hardware
   - Fix for PR APTPL metadata handling with demo-mode ACLs

  I'm most excited about the new backend driver that uses UIO + shared
  memory ring to dispatch I/O and control commands into user-space.
  This was probably the most requested feature by users over the last
  couple of years, and opens up a new area of development + porting of
  existing user-space storage applications to LIO.  Thanks to Shaohua +
  Andy for making this happen.

  Also another honorable mention, a new Xen PV SCSI driver was merged
  via the xen/tip.git tree recently, which puts us now at 10 target
  drivers in upstream! Thanks to David Vrabel + Juergen Gross for their
  work to get this code merged"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
  target/file: fix inclusive vfs_fsync_range() end
  iser-target: Disable TX completion interrupt coalescing
  target: Add force_pr_aptpl device attribute
  target: Fix APTPL metadata handling for dynamic MappedLUNs
  qla_target: don't delete changed nacls
  target/user: Recalculate pad size inside is_ring_space_avail()
  tcm_loop: Fixup tag handling
  iser-target: Fix smatch warning
  target/user: Fix up smatch warnings in tcmu_netlink_event
  target: Add a user-passthrough backstore
  target: Add documentation on the target userspace pass-through driver
  uio: Export definition of struct uio_device
  target: Remove unneeded check in sbc_parse_cdb
  target: Fix queue full status NULL pointer for SCF_TRANSPORT_TASK_SENSE
  qla_target: rearrange struct qla_tgt_prm
  qla_target: improve qlt_unmap_sg()
  qla_target: make some global functions static
  qla_target: remove unused parameter
  target: simplify core_tmr_abort_task
  target: encapsulate smp_mb__after_atomic()
  ...

Pull email address change from Boaz Harrosh.

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  Boaz Harrosh - fix email in Documentation
  Boaz Harrosh - Fix broken email address
  MAINTAINERS: Change Boaz Harrosh's email

Pull mailbox framework from Jassi Brar:
 "A framework for Mailbox controllers and clients have been cooking for
  more than a year now.

  Everybody in the CC list had been copied on patchset revisions and
  most of them have made sounds of approval, though just one concrete
  Reviewed-by.  The patchset has also been in linux-next for a couple of
  weeks now and no conflict has been reported.  The framework has the
  backing of at least 5 platforms, though I can't say if/when they
  upstream their drivers (some businesses have 'changed')"

(Further acked-by by Arnd Bergmann and Suman Anna in the pull request
thread)

* 'mailbox-for-linus' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt: mailbox: add generic bindings
  doc: add documentation for mailbox framework
  mailbox: Introduce framework for mailbox
  mailbox: rename pl320-ipc specific mailbox.h

Pull watchdog updates from Wim Van Sebroeck:
 - new Cadence WDT driver
 - new Ricoh RN5T618 watchdog
 - new DA9063 PMIC watchdog driver
 - new Meson WDT driver
 - add restart handling code
 - fixes and improvements

* git://www.linux-watchdog.org/linux-watchdog: (25 commits)
  watchdog: meson: remove magic value for reboot
  watchdog: Let XILINX_WATCHDOG and TEGRA_WATCHDOG depend on HAS_IOMEM
  watchdog: sunxi: Add A31 watchdog support
  watchdog: sunxi: support parameterized compatible strings
  watchdog: imx2_wdt: add restart handler support
  watchdog: qcom: register a restart notifier
  watchdog: s3c2410: add restart handler
  watchdog: dw_wdt: add restart handler support
  ARM: defconfig: update multi_v7_defconfig
  ARM: meson: add watchdog driver
  ARM: docs: add documentation binding for meson watchdog
  stmp3xxx_rtc_wdt: Add suspend/resume PM support
  watchdog: Add DA9063 PMIC watchdog driver.
  watchdog: add driver for Ricoh RN5T618 watchdog
  watchdog: s3c2410_wdt: Add support for Watchdog device on Exynos7
  watchdog: qcom: document device tree bindings
  watchdog: qcom: add support for KPSS WDT
  watchdog: dw_wdt: initialise TOP_INIT in dw_wdt_set_top()
  devicetree: Add Cadence WDT devicetree bindings documentation
  watchdog: Add Cadence WDT driver
  ...

Pull LED update from Bryan Wu:
 "Basically we have some bug fixing and clean up and one big thing is we
  start to merge patch to add support LED Flash class"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: gpio: cleanup the leds-gpio driver
  led: gpio: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  led: gpio: Sort include headers alphabetically
  leds: Improve and export led_update_brightness
  leds: trigger: gpio: fix warning in gpio trigger for gpios whose accessor function may sleep
  leds: lp3944: fix sparse warning
  leds: avoid using DEVICE_ATTR macro for max_brightness attribute
  leds: make brightness type consistent across whole subsystem
  leds: Reorder include directives

Merge tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "There are no new drivers here, only a couple of fixes all over the
  place"

* tag 'pwm/for-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: Let PWM_CLPS711X depend on HAS_IOMEM
  pwm: atmel: Fix calculation of prescale value
  pwm: Fix uninitialized warnings in pwm_get()
  pwm: rockchip: Allow polarity invert on rk3288
  pwm: imx: Avoid sample FIFO overflow for i.MX PWM version2
  pwm: imx: Cleanup indentation for register definitions
  pwm: imx: Fix the macro MX3_PWMCR_PRESCALER(x) definition
  pwm: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  pwm: lpss: make it buildable only on X86
  pwm: lpss: use c99 initializers in structures
  pwm: lpss: Fix build failure on PowerPC
  pwm: lpss: pci: Move to use pcim_enable_device()
  pwm: lpss: Properly split driver to parts
  pwm: lpss: Add ACPI and PCI IDs for Intel Braswell
  pwm: fsl-ftm: Select REGMAP_MMIO
  pwm: fsl-ftm: Document 'big-endian' property
  pwm: fsl-ftm: Convert to direct regmap API usage
  pwm: fsl-ftm: Clean up the code

Pull ARC updates from Vineet Gupta:
 "Sorry for the late pull request.  Current stuff was ready for a while
  but I was hoping to squeeze in support for almost ready ARC SDP
  platform (and avoid a 2nd pull request), however it seems there are
  still some loose ends which warrant more time.

   - Platform code reduction/moving-up (TB10X no longer needs any
     callbacks)
   - updated boot printing
   - kgdb update for arc gdb 7.5
   - bug fixes (some marked for stable)
   - more code refactoring/consolidation"

* tag 'arc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: boot: cpu feature print enhancements
  ARC: boot: consolidate cross-checking of h/w and s/w
  ARC: unbork FPU save/restore
  ARC: remove extraneous __KERNEL__ guards
  ARC: Update order of registers in KGDB to match GDB 7.5
  ARC: Remove unneeded Kconfig entry NO_DMA
  ARC: BUG() dumps stack after @msg (@msg now same as in generic BUG))
  ARC: refactoring: reduce the scope of some local vars
  ARC: remove gcc mpy heuristics
  ARC: RIP @running_on_hw
  ARC: Update comments about uncached address space
  ARC: rename kconfig option for unaligned emulation
  ARC: [nsimosci] Allow "headless" models to boot
  ARC: [arcfpga] Get rid of ARC_BOARD_ANGEL4 and ARC_BOARD_ML509
  ARC: [arcfpga] Remove more dead code
  ARC: [plat*] move code out of .init_machine into common
  ARC: [arcfpga] consolidate machine description, DT
  ARC: Allow SMP kernel to build/boot on UP-only infrastructure

Pull more powerpc updates from Michael Ellerman:
 "Here's some more updates for powerpc for 3.18.

  They are a bit late I know, though must are actually bug fixes.  In my
  defence I nearly cut the top of my finger off last weekend in a
  gruesome bike maintenance accident, so I spent a good part of the week
  waiting around for doctors.  True story, I can send photos if you like :)

  Probably the most interesting fix is the sys_call_table one, which
  enables syscall tracing for powerpc.  There's a fix for HMI handling
  for old firmware, more endian fixes for firmware interfaces, more EEH
  fixes, Anton fixed our routine that gets the current stack pointer,
  and a few other misc bits"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (22 commits)
  powerpc: Only do dynamic DMA zone limits on platforms that need it
  powerpc: sync pseries_le_defconfig with pseries_defconfig
  powerpc: Add printk levels to setup_system output
  powerpc/vphn: NUMA node code expects big-endian
  powerpc/msi: Use WARN_ON() in msi bitmap selftests
  powerpc/msi: Fix the msi bitmap alignment tests
  powerpc/eeh: Block CFG upon frozen Shiner adapter
  powerpc/eeh: Don't collect logs on PE with blocked config space
  powerpc/eeh: Block PCI config access upon frozen PE
  powerpc/pseries: Drop config requests in EEH accessors
  powerpc/powernv: Drop config requests in EEH accessors
  powerpc/eeh: Rename flag EEH_PE_RESET to EEH_PE_CFG_BLOCKED
  powerpc/eeh: Fix condition for isolated state
  powerpc/pseries: Make CPU hotplug path endian safe
  powerpc/pseries: Use dump_stack instead of show_stack
  powerpc: Rename __get_SP() to current_stack_pointer()
  powerpc: Reimplement __get_SP() as a function not a define
  powerpc/numa: Add ability to disable and debug topology updates
  powerpc/numa: check error return from proc_create
  powerpc/powernv: Fallback to old HMI handling behavior for old firmware
  ...

Pull s390 updates from Martin Schwidefsky:
 "One patch to enable the BPF system call and three more bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/uprobes: fix kprobes dependency
  s390: wire up bpf syscall
  s390/mm: fixing calls of pte_unmap_unlock
  s390/hmcdrv: Restrict s390 HMC driver to S390 arch

This patch removes the magic value used for rebooting the board. This
value is useless and leads to a static checker warning as reported by
Dan Carpenter.
Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

They need HAS_IOMEM, so let them depend on it, the related error (with
allmodconfig under um):

    MODPOST 1205 modules
  ERROR: "devm_ioremap_resource" [drivers/watchdog/tegra_wdt.ko] undefined!
  ERROR: "devm_ioremap_resource" [drivers/watchdog/of_xilinx_wdt.ko] undefined!
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch adds support for the watchdog hardware found in A31 and
newer SoCs. This new hardware has registers at different offsets, and
the system reset control has been split out of the "mode" register
into a new "configuration" register.

Differences not supported by this driver include separate interrupt
lines for each watchdog, instead of sharing an interrupt line and
registers with the timer block.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch adds support for hardware parameters tied to compatible
strings, so similar hardware can reuse the driver.

This will be used to support the newer watchdog found in A31 and
later SoCs. Differences in the new hardware include separate
interrupt lines for each watchdog, and corresponding interrupt
control/status registers. Watchdog control registers were also
slightly rearranged.

Also replace ioread32()/iowrite32() with readl()/writel() in various
places changed.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

  Register the watchdog as the system restart function
to the new introducing kernel restart call chain in the
driver instead of providing the restart in machine desc.
  This restart handler function is from the mxc_restart()
in arch/arm/mach-imx/system.c
Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The WDT's BITE_TIME warm-reset behavior can be leveraged as a last
resort mechanism for triggering chip reset.  Usually, other restart
methods (such as PS_HOLD) are preferrable for issuing a more complete
reset of the chip.  As such, keep the priority of the watchdog notifier
low.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

On a lot of Samsung systems the watchdog is responsible for restarting the
system and until now this code was contained in plat-samsung/watchdog-reset.c.

With the introduction of the restart handlers, this code can now move into
driver itself, removing the need for arch-specific code.

Tested on a S3C2442 based GTA02
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The kernel core now provides an API to trigger a system restart.
Register with it to support restarting the system via. watchdog.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Update the multi_v7_defconfig enabling the watchdog driver for Meson
SoCs.
Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This patch adds the watchdog driver for the Amlogic Meson SoCs used also
to reboot the device.
Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Carlo Caione <carlo@caione.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

There is no conflict with rtc/rtc-stmp3xxx.c parent
because modified registers in PM functions of stmp3xxx_rtc_wdt
are different.
Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This driver supports the watchdog device inside the DA9063 PMIC.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

This adds a driver for the watchdog timer available in Ricoh RN5T618
PMIC. The device supports a programmable expiration time of 1, 8, 32
or 128 seconds.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Exynos7 SoC has a Watchdog for Atlas (A57) cores
This patch adds support for the Atlas watchdog.
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The Qualcomm Krait Processor Sub-system (KPSS) contains one or more
instances of the WDT.  Provide documentation on how to describe these in
the device tree.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add a driver for the watchdog timer block found in the Krait Processor
Subsystem (KPSS) on the MSM8960, APQ8064, and IPQ8064.
Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

The TOP_INIT, ie bit 4-7 of the WDOG_TIMEOUT_RANGE_REG_OFFSET register
may be zero, so the timeout period may be very short after initialization
is done, thus the system may be reset soon after enabling. We fix this
problem by also initialising the TOP_INIT when setting TOP in function
dw_wdt_set_top().
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add cadence-wdt bindings documentation.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Add Cadence WDT driver. This is used by Xilinx Zynq.
Signed-off-by: Harini Katakam <harinik@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Uwe Kleine-K=C3=B6nig <u.kleine-koenig@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

There is no need to store the return value of misc_deregister() in a
variable. Instead we can just return the value directly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Building booke_wdt fails when trying to build as a module as there is no
early_param() in module. Fix by using module_param() instead of early_param().
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

There is no need to init .owner field.

Based on the patch from Peter Griffin <peter.griffin@linaro.org>
"mmc: remove .owner field for drivers using module_platform_driver"

This patch removes the superflous .owner field for drivers which
use the module_platform_driver API, as this is overriden in
platform_driver_register anyway."
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull ext4 updates from Ted Ts'o:
 "A large number of cleanups and bug fixes, with some (minor) journal
  optimizations"

[ This got sent to me before -rc1, but was stuck in my spam folder.   - Linus ]

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits)
  ext4: check s_chksum_driver when looking for bg csum presence
  ext4: move error report out of atomic context in ext4_init_block_bitmap()
  ext4: Replace open coded mdata csum feature to helper function
  ext4: delete useless comments about ext4_move_extents
  ext4: fix reservation overflow in ext4_da_write_begin
  ext4: add ext4_iget_normal() which is to be used for dir tree lookups
  ext4: don't orphan or truncate the boot loader inode
  ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT
  ext4: optimize block allocation on grow indepth
  ext4: get rid of code duplication
  ext4: fix over-defensive complaint after journal abort
  ext4: fix return value of ext4_do_update_inode
  ext4: fix mmap data corruption when blocksize < pagesize
  vfs: fix data corruption when blocksize < pagesize for mmaped data
  ext4: fold ext4_nojournal_sops into ext4_sops
  ext4: support freezing ext2 (nojournal) file systems
  ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs()
  ext4: don't check quota format when there are no quota files
  jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list
  jbd2: avoid pointless scanning of checkpoint lists
  ...

PWM_CLPS711X needs HAS_IOMEM, so depend on it, the related error (with
allmodconfig under um):

    MODPOST 1205 modules
  ERROR: "devm_ioremap_resource" [drivers/pwm/pwm-clps711x.ko] undefined!
  ERROR: "devm_ioremap" [drivers/net/phy/mdio-bcm-unimac.ko] undefined!
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>