- 15 Aug, 2013 6 commits
-
-
Dan Carpenter authored
We know that "dev" is a valid pointer at this point, so we can remove the test and clean up a little. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Dichtel says: ==================== This series is a follow up of the previous series whcih adds this functionality for sit tunnels. The goal is to add x-netns support for the module ipip and ip6_tunnel, ie. the encapsulation addresses and the network device are not owned by the same namespace. Note that the two first patches are cleanups. Example to configure an ipip tunnel: modprobe ipip ip netns add netns1 ip link add ipip1 type ipip remote 10.16.0.121 local 10.16.0.249 ip l s ipip1 netns netns1 ip netns exec netns1 ip l s lo up ip netns exec netns1 ip l s ipip1 up ip netns exec netns1 ip a a dev ipip1 192.168.2.123 remote 192.168.2.121 or an ip6_tunnel: modprobe ip6_tunnel ip netns add netns1 ip link add ip6tnl1 type ip6tnl remote 2001:660:3008:c1c3::121 local 2001:660:3008:c1c3::123 ip l s ip6tnl1 netns netns1 ip netns exec netns1 ip l s lo up ip netns exec netns1 ip l s ip6tnl1 up ip netns exec netns1 ip a a dev ip6tnl1 192.168.1.123 remote 192.168.1.121 ip netns exec netns1 ip -6 a a dev ip6tnl1 2001:1235::123 remote 2001:1235::121 v2: remove the patch 1/3 of the v1 series (already included) use net_eq() add patch 1/4 and 2/4 ====================- Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
This patch allows to switch the netns when packet is encapsulated or decapsulated. In other word, the encapsulated packet is received in a netns, where the lookup is done to find the tunnel. Once the tunnel is found, the packet is decapsulated and injecting into the corresponding interface which stands to another netns. When one of the two netns is removed, the tunnel is destroyed. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
It's better to use available helpers for these tests. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
skb_scrub_packet() was called before eth_type_trans() to let eth_type_trans() set pkt_type. In fact, we should force pkt_type to PACKET_HOST, so move the call after eth_type_trans(). Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Aug, 2013 1 commit
-
-
Hannes Frederic Sowa authored
Commit cab70040 ("net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3") and 2690048c ("net: igmp: Allow user-space configuration of igmp unsolicited report interval") by William Manley made igmp unsolicited report intervals configurable per interface and corrected the interval of unsolicited igmpv3 report messages resendings to 1s. Same needs to be done for IPv6: MLDv1 (RFC2710 7.10.): 10 seconds MLDv2 (RFC3810 9.11.): 1 second Both intervals are configurable via new procfs knobs mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval. (also added .force_mld_version to ipv6_devconf_dflt to bring structs in line without semantic changes) v2: a) Joined documentation update for IPv4 and IPv6 MLD/IGMP unsolicited_report_interval procfs knobs. b) incorporate stylistic feedback from William Manley v3: a) add new DEVCONF_* values to the end of the enum (thanks to David Miller) Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: William Manley <william.manley@youview.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 13 Aug, 2013 8 commits
-
-
Yuchung Cheng authored
On timeout the TCP sender unconditionally resets the estimated degree of network reordering (tp->reordering). The idea behind this is that the estimate is too large to trigger fast recovery (e.g., due to a IP path change). But for example if the sender only had 2 packets outstanding, then a timeout doesn't tell much about reordering. A sender that learns about reordering on big writes and loses packets on small writes will end up falsely retransmitting again and again, especially when reordering is more likely on big writes. Therefore the sender should only suspect that tp->reordering is too high if it could have gone into fast recovery with the (lower) default estimate. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== This is a batch of updates intended for 3.12. It is mostly driver stuff, although Johannes Berg and Simon Wunderlich make a good showing with mac80211 bits (particularly some work on 5/10 MHz channel support). The usual suspects are mostly represented. There are lots of updates to iwlwifi, ath9k, ath10k, mwifiex, rt2x00, wil6210, as usual. The bcma bus gets some love this time, as do cw1200, iwl4965, and a few other bits here and there. I don't think there is much unusual here, FWIW. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
The new IP version which is present in AM43xx SoC has a minor changes and the offsets are same as the previous version, so adding new IP version support in the driver. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
eTSEC has Rx and Tx flow control capabilities that may be enabled through MACCFG1[Rx_Flow, Tx_Flow] bits. These bits must not be set however when eTSEC is operated in Half-Duplex mode. Unfortunately, the driver currently sets these bits unconditionally. This patch adds the proper handling of the PAUSE frame capability register bits by implementing the ethtool -A interface. When pause autoneg is enabled, the controller uses the phy's capability to negotiate PAUSE frame settings with the link partner and reconfigures its Rx_Flow and Tx_Flow settings to match the capabilities of the link partner. If pause autoneg is off, the PAUSE frame generation may be forced manually (ethtool -A). Flow control is disabled by default now. This implementation is inspired by the tg3 driver. Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Pptp driver has lots of byte order warnings from sparse. This was because the on-the-wire header is in network byte order (obviously) but the definition did not reflect that. Also, the address structure to user space actually put the call id in host order. Rather than break ABI compatibility, just acknowledge the existing design. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Yasevich authored
This patch adds a base infrastructure that allows SCTP to do memory accounting for control chunks. Real accounting code will follow. This patch alos fixes the following triggered bug ... [ 553.109742] kernel BUG at include/linux/skbuff.h:1813! [ 553.109766] invalid opcode: 0000 [#1] SMP [ 553.109789] Modules linked in: sctp libcrc32c rfcomm [...] [ 553.110259] uinput i915 i2c_algo_bit drm_kms_helper e1000e drm ptp pps_core i2c_core wmi video sunrpc [ 553.110320] CPU: 0 PID: 1636 Comm: lt-test_1_to_1_ Not tainted 3.11.0-rc3+ #2 [ 553.110350] Hardware name: LENOVO 74597D6/74597D6, BIOS 6DET60WW (3.10 ) 09/17/2009 [ 553.110381] task: ffff88020a01dd40 ti: ffff880204ed0000 task.ti: ffff880204ed0000 [ 553.110411] RIP: 0010:[<ffffffffa0698017>] [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110459] RSP: 0018:ffff880204ed1bb8 EFLAGS: 00010286 [ 553.110483] RAX: ffff8802086f5a40 RBX: ffff880204303300 RCX: 0000000000000000 [ 553.110487] RDX: ffff880204303c28 RSI: ffff8802086f5a40 RDI: ffff880202158000 [ 553.110487] RBP: ffff880204ed1bb8 R08: 0000000000000000 R09: 0000000000000000 [ 553.110487] R10: ffff88022f2d9a04 R11: ffff880233001600 R12: 0000000000000000 [ 553.110487] R13: ffff880204303c00 R14: ffff8802293d0000 R15: ffff880202158000 [ 553.110487] FS: 00007f31b31fe740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [ 553.110487] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 553.110487] CR2: 000000379980e3e0 CR3: 000000020d225000 CR4: 00000000000407f0 [ 553.110487] Stack: [ 553.110487] ffff880204ed1ca8 ffffffffa068d7fc 0000000000000000 0000000000000000 [ 553.110487] 0000000000000000 ffff8802293d0000 ffff880202158000 ffffffff81cb7900 [ 553.110487] 0000000000000000 0000400000001c68 ffff8802086f5a40 000000000000000f [ 553.110487] Call Trace: [ 553.110487] [<ffffffffa068d7fc>] sctp_sendmsg+0x6bc/0xc80 [sctp] [ 553.110487] [<ffffffff8128f185>] ? sock_has_perm+0x75/0x90 [ 553.110487] [<ffffffff815a3593>] inet_sendmsg+0x63/0xb0 [ 553.110487] [<ffffffff8128f2b3>] ? selinux_socket_sendmsg+0x23/0x30 [ 553.110487] [<ffffffff8151c5d6>] sock_sendmsg+0xa6/0xd0 [ 553.110487] [<ffffffff81637b05>] ? _raw_spin_unlock_bh+0x15/0x20 [ 553.110487] [<ffffffff8151cd38>] SYSC_sendto+0x128/0x180 [ 553.110487] [<ffffffff8151ce6b>] ? SYSC_connect+0xdb/0x100 [ 553.110487] [<ffffffffa0690031>] ? sctp_inet_listen+0x71/0x1f0 [sctp] [ 553.110487] [<ffffffff8151d35e>] SyS_sendto+0xe/0x10 [ 553.110487] [<ffffffff81640202>] system_call_fastpath+0x16/0x1b [ 553.110487] Code: e0 48 c7 c7 00 22 6a a0 e8 67 a3 f0 e0 48 c7 [...] [ 553.110487] RIP [<ffffffffa0698017>] skb_orphan.part.9+0x4/0x6 [sctp] [ 553.110487] RSP <ffff880204ed1bb8> [ 553.121578] ---[ end trace 46c20c5903ef5be2 ]--- The approach taken here is to split data and control chunks creation a bit. Data chunks already have memory accounting so noting needs to happen. For control chunks, add stubs handlers. Signed-off-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Brown authored
Ensure that the definition of ax88172a_info matches the declaration seen by users and silence sparse warnings about symbols without declarations in the global namespace by moving the declaration into the shared header asix.h. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mark Brown authored
Make functions that are only referenced from ops structures static, they do not need to be in the global namespace and sparse complains about this. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 12 Aug, 2013 4 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/ethernet/broadcom/Kconfig
-
Bing Zhao authored
config: make ARCH=m68k allmodconfig All error/warnings: drivers/net/wireless/mwifiex/cfg80211.c: In function 'mwifiex_fill_coalesce_rule_info': >> drivers/net/wireless/mwifiex/cfg80211.c:2493:3: error: implicit declaration of function 'mwifiex_is_pattern_supported' [-Werror=implicit-function-declaration] drivers/net/wireless/mwifiex/cfg80211.c: At top level: drivers/net/wireless/mwifiex/cfg80211.c:2537:12: warning: 'mwifiex_cfg80211_set_coalesce' defined but not used [-Wunused-function] cc1: some warnings being treated as errors Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Eric Dumazet authored
commit e370a723 ("af_unix: improve STREAM behavior with fragmented memory") added a bug on large send() because the skb_copy_datagram_from_iovec() call always start from the beginning of iovec. We must instead use the @sent variable to properly skip the already processed part. Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonas Jensen authored
The MOXA UC-711X hardware(s) has an ethernet controller that seem to be developed internally. The IC used is "RTL8201CP". Since there is no public documentation, this driver is mostly the one published by MOXA that has been heavily cleaned up / ported from linux 2.6.9. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Aug, 2013 3 commits
-
-
Eric Dumazet authored
Adding paged frags skbs to af_unix sockets introduced a performance regression on large sends because of additional page allocations, even if each skb could carry at least 100% more payload than before. We can instruct sock_alloc_send_pskb() to attempt high order allocations. Most of the time, it does a single page allocation instead of 8. I added an additional parameter to sock_alloc_send_pskb() to let other users to opt-in for this new feature on followup patches. Tested: Before patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 46861.15 After patch : $ netperf -t STREAM_STREAM STREAM STREAM TEST Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 2304 212992 212992 10.00 57981.11 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
unix_stream_sendmsg() currently uses order-2 allocations, and we had numerous reports this can fail. The __GFP_REPEAT flag present in sock_alloc_send_pskb() is not helping. This patch extends the work done in commit eb6a2481 ("af_unix: reduce high order page allocations) for datagram sockets. This opens the possibility of zero copy IO (splice() and friends) The trick is to not use skb_pull() anymore in recvmsg() path, and instead add a @consumed field in UNIXCB() to track amount of already read payload in the skb. There is a performance regression for large sends because of extra page allocations that will be addressed in a follow-up patch, allowing sock_alloc_send_pskb() to attempt high order page allocations. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuchung Cheng authored
Encrypt the cookie with both server and client IPv4 addresses, such that multi-homed server will grant different cookies based on both the source and destination IPs. No client change is needed since cookie is opaque to the client. Signed-off-by: Yuchung Cheng <ycheng@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Aug, 2013 18 commits
-
-
stephen hemminger authored
callid_sock array is referenced via rcu_dereference and sparse rcu checks complains about address space mismatch. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Nithin Nayak Sujir <nsujir@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Manish Chopra <manish.chopra@qlogic.com> Cc: Sony Chacko <sony.chacko@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Andrew Gallatin <gallatin@myri.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: netdev@vger.kernel.org Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
PCI core will initialize device MSI/MSI-X capability in pci_msi_init_pci_dev(). So device driver should use pci_dev->msi_cap/msix_cap to determine whether the device support MSI/MSI-X instead of using pci_find_capability(pci_dev, PCI_CAP_ID_MSI/MSIX). Access to PCIe device config space again will consume more time. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: Michael Chan <mchan@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit cda5f98e. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sujith Manoharan authored
The LNA combining algorithm has to be run for cards that support the required diversity features, make sure that that correct conditions are met before enabing this algorithm. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Sujith Manoharan authored
BTCOEX has to be *disabled* for WLAN RX diversity to work on combo cards. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Create a per-vif dummy node entry for keeping the multicast software queues. This helps in setups with a lot of mulitcast traffic that could otherwise potentially drown out unicast traffic to stations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Instead of trying to schedule the same TID multiple times in a loop, iterate over other TIDs/stations first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
This is a first step for improving fairness between legacy and 802.11n traffic, and it should also improve reliability of resets and channel changes by keeping the hardware queue depth very short. When an aggregation session is torn down, all packets in the retry queue will be removed from the BAW and freed. For all subframes that have not been transmitted yet, the A-MPDU flag will be cleared, and a sequence number allocated. This ensures that the next A-MPDU session will get the correct initial sequence number. This happens both on aggregation session start and stop. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Otherwise in some cases, EAPOL frames might be filtered during the initial handshake, causing delays and assoc failures. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When the tid aggregation state has been marked as inactive, free completed tx packets immediately. When a new aggregation session has not been initialized yet, the BAW checks do not recognize it as expired. Might fix potential stalls in setting up a new aggregation session. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
- Allow ath_tx_get_tid_subframe to return non-AMPDU subframes. - Reset the tid paused state on aggregation stop - Initialize software queues even when HT is not supported Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
When a packet has been tracked as part of the BlockAck window and added to the hardware queue, it can end up back in the TID queue again with fi->retries still set to 0 (e.g. if the frame was filtered). Keep an extra bit for the BAW tracking status to fix this corner case. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-