- 21 Jun, 2006 40 commits
-
-
Duncan Sands authored
Remove pointless inline. Signed-off-by:
Duncan Sands <baldrick@free.fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Pete Zaitcev authored
Remove the check for NULL which makes no sense. Suggested by Al. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
Some hubs claim not to support port-power switching, and right now the hub driver believes them and does not enable power to their ports. However it turns out that even though they don't actually switch power, they do ignore all events on a port until told to turn on the power! This problem has been reported by several users. This revised patch (as672b) makes the hub driver always try to turn on port power to all hubs, regardless of what the hub descriptor says. It also adds a comment explaining the need for this. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Nicolas Boichat authored
Add support for MacBook touchpad in appletouch driver. Thanks to Alex Harper for the informations. Use u16 instead of int16_t in atp_is_geyser* functions. Acked-by:
Johannes Berg <johannes@sipsolutions.net> Acked-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
Nicolas Boichat <nicolas@boichat.ch> Signed-off-by:
-
Guennadi Liakhovetski authored
Prevent sending further output to a USB-serial console after the dongle is disconnected, take care not to leak kref. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Paul Fulghum authored
Prevent ENODEV on a /dev/ttyUSBx, used as a USB-serial console. From: Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Prevent NULL dereference when used as a USB-serial console. Signed-off-by:
-
Paul Fulghum authored
Append Carriage-Returns after Line-Feeds, analogous to the serial driver. From: Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
Kumar Gala authored
In some systems we may have both a platform EHCI controller and PCI EHCI controller. Previously we couldn't build the EHCI support as a module due to conflicting module_init() calls in the code. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Adrian Bunk authored
This patch contains the following possible cleanups: - make needlessly global functions static - function and struct declarations belong into header files - make SiS_VCLKData const - #if 0 the following unused global functions: - sisusb.c: sisusb_writew() - sisusb.c: sisusb_readw() - sisusb_init.c: SiSUSB_GetModeID() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Arjan van de Ven authored
From: Arjan van de Ven <arjan@infradead.org> Convert the semaphores-used-as-mutex to mutexes in the sisusb video driver; this required manual checking due to the "return as locked" stuff in this driver, but the ->lock semaphore is still used as mutex in the end. Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Cc: Thomas Winischhofer <winischhofer.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Eduard Warkentin authored
Add support for detection and dworking with a ASIX 88178 based USB-Gigabit adaptor. With the patch, it is detected and handled correctly by the asix module. Signed-off-by:
-
David Brownell authored
This includes an MTU fixup which could affect larger packets with newer Zaurii, described as http://bugzilla.kernel.org/show_bug.cgi?id=6286; plus minor whitespace cleanup. Signed-off-by:
-
Oliver Neukum authored
this fixes the "duplicated text" bug. There's a modem that cannot cope with large transfers and more than one urb in flight. This patch adds a special case to the driver. Signed-off-by:
Oliver Neukum <oliver@neukum.name> Signed-off-by:
-
Henk Vergonet authored
Keys on Yealink based phones will not function properly when using the generic HID driver. This patch prevents the generic HID code from grabbing the device before the regular yealink driver can get a grip on it. Signed-off-by:
Henk Vergonet <Henk.Vergonet@gmail.com> Signed-off-by:
Vojtech Pavlik <vojtech@suse.cz> Signed-off-by:
-
Paul Serice authored
From: Paul Serice <paul@serice.net> The workaround in commit f7201c3d broke. The work around requires memory for DMA transfers for some NVidia EHCI controllers to be below 2GB, but recent changes have caused some DMA memory to be allocated before the DMA mask is set. Signed-off-by:
Paul Serice <paul@serice.net> Signed-off-by:
-
Rene Herman authored
During the recent "isa drivers using platform devices" discussion it was pointed out that (ALSA) ISA drivers ran into the problem of not having the option to fail driver load (device registration rather) upon not finding their hardware due to a probe() error not being passed up through the driver model. In the course of that, I suggested a seperate ISA bus might be best; Russell King agreed and suggested this bus could use the .match() method for the actual device discovery. The attached does this. For this old non (generically) discoverable ISA hardware only the driver itself can do discovery so as a difference with the platform_bus, this isa_bus also distributes match() up to the driver. As another difference: these devices only exist in the driver model due to the driver creating them because it might want to drive them, meaning that all device creation has been made internal as well. The usage model this provides is nice, and has been acked from the ALSA side by Takashi Iwai and Jaroslav Kysela. The ALSA driver module_init's now (for oldisa-only drivers) become: static int __init alsa_card_foo_init(void) { return isa_register_driver(&snd_foo_isa_driver, SNDRV_CARDS); } static void __exit alsa_card_foo_exit(void) { isa_unregister_driver(&snd_foo_isa_driver); } Quite like the other bus models therefore. This removes a lot of duplicated init code from the ALSA ISA drivers. The passed in isa_driver struct is the regular driver struct embedding a struct device_driver, the normal probe/remove/shutdown/suspend/resume callbacks, and as indicated that .match callback. The "SNDRV_CARDS" you see being passed in is a "unsigned int ndev" parameter, indicating how many devices to create and call our methods with. The platform_driver callbacks are called with a platform_device param; the isa_driver callbacks are being called with a "struct device *dev, unsigned int id" pair directly -- with the device creation completely internal to the bus it's much cleaner to not leak isa_dev's by passing them in at all. The id is the only thing we ever want other then the struct device * anyways, and it makes for nicer code in the callbacks as well. With this additional .match() callback ISA drivers have all options. If ALSA would want to keep the old non-load behaviour, it could stick all of the old .probe in .match, which would only keep them registered after everything was found to be present and accounted for. If it wanted the behaviour of always loading as it inadvertently did for a bit after the changeover to platform devices, it could just not provide a .match() and do everything in .probe() as before. If it, as Takashi Iwai already suggested earlier as a way of following the model from saner buses more closely, wants to load when a later bind could conceivably succeed, it could use .match() for the prerequisites (such as checking the user wants the card enabled and that port/irq/dma values have been passed in) and .probe() for everything else. This is the nicest model. To the code... This exports only two functions; isa_{,un}register_driver(). isa_register_driver() register's the struct device_driver, and then loops over the passed in ndev creating devices and registering them. This causes the bus match method to be called for them, which is: int isa_bus_match(struct device *dev, struct device_driver *driver) { struct isa_driver *isa_driver = to_isa_driver(driver); if (dev->platform_data == isa_driver) { if (!isa_driver->match || isa_driver->match(dev, to_isa_dev(dev)->id)) return 1; dev->platform_data = NULL; } return 0; } The first thing this does is check if this device is in fact one of this driver's devices by seeing if the device's platform_data pointer is set to this driver. Platform devices compare strings, but we don't need to do that with everything being internal, so isa_register_driver() abuses dev->platform_data as a isa_driver pointer which we can then check here. I believe platform_data is available for this, but if rather not, moving the isa_driver pointer to the private struct isa_dev is ofcourse fine as well. Then, if the the driver did not provide a .match, it matches. If it did, the driver match() method is called to determine a match. If it did _not_ match, dev->platform_data is reset to indicate this to isa_register_driver which can then unregister the device again. If during all this, there's any error, or no devices matched at all everything is backed out again and the error, or -ENODEV, is returned. isa_unregister_driver() just unregisters the matched devices and the driver itself. More global points/questions... - I'm introducing include/linux/isa.h. It was available but is ofcourse a somewhat generic name. Moving more isa stuff over to it in time is ofcourse fine, so can I have it please? :) - I'm using device_initcall() and added the isa.o (dependent on CONFIG_ISA) after the base driver model things in the Makefile. Will this do, or I really need to stick it in drivers/base/init.c, inside #ifdef CONFIG_ISA? It's working fine. Lastly -- I also looked, a bit, into integrating with PnP. "Old ISA" could be another pnp_protocol, but this does not seem to be a good match, largely due to the same reason platform_devices weren't -- the devices do not have a life of their own outside the driver, meaning the pnp_protocol {get,set}_resources callbacks would need to callback into driver -- which again means you first need to _have_ that driver. Even if there's clean way around that, you only end up inventing fake but valid-form PnP IDs and generally catering to the PnP layer without any practical advantages over this very simple isa_bus. The thing I also suggested earlier about the user echoing values into /sys to set up the hardware from userspace first is... well, cute, but a horrible idea from a user standpoint. Comments ofcourse appreciated. Hope it's okay. As said, the usage model is nice at least. Signed-off-by:Rene Herman <rene.herman@keyaccess.nl>
-
Alan Stern authored
This patch (as721) makes dev_info and related macros print the device's bus name if the device doesn't have a driver, instead of printing just a blank. If the device isn't on a bus either... well, then it does leave a blank space. But it will be easier for someone else to change if they want. Cc: Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Greg Kroah-Hartman authored
We need to create the "compatible" symlinks that class_devices used to create when they were in the class directories so that userspace does not know anything changed at all. Yeah, we have a lot of symlinks now, but we should be able to get rid of them in a year or two... (wishful thinking...) Signed-off-by: -
Kay Sievers authored
Like the SUBSYTEM= key we find in the environment of the uevent, this creates a generic "subsystem" link in sysfs for every device. Userspace usually doesn't care at all if its a "class" or a "bus" device. This provides an unified way to determine the subsytem of a device, regardless of the way the driver core has created it. Signed-off-by:
Kay Sievers <kay.sievers@suse.de> Signed-off-by:
-
Greg Kroah-Hartman authored
This is the first step in moving class_device to being replaced by struct device. It allows struct device to export a dev_t and makes it easy to dynamically create and destroy struct device as long as they are associated with a specific class. Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: -
Greg Kroah-Hartman authored
This is needed for a future patch for the device code to create the proper symlinks for devices that are "class devices". Signed-off-by: -
Laura Garcia authored
Hi, this patch converts semaphores to mutexes for Randy's firmware_class. Signed-off-by:
Laura Garcia Liebana <nevola@gmail.com> Signed-off-by:
-
David Brownell authored
This makes the driver model PM suspend debug messages more useful, by (a) explaining what event is being sent, since not all suspend() requests mean the same thing; (b) reporting when a PM_EVENT_SUSPEND call is allowing the device to issue wakeup events. Signed-off-by: -
David Brownell authored
Remove a chunk of duplicated documentation text. Signed-off-by: -
Michael Holzheu authored
To have a home for all hypervisors, this patch creates /sys/hypervisor. A new config option SYS_HYPERVISOR is introduced, which should to be set by architecture dependent hypervisors (e.g. s390 or Xen). Acked-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Michael Holzheu <holzheu@de.ibm.com> Signed-off-by:
-
Russell King authored
platform_device_add() should be using device_add() rather than device_register() - any platform device passed to platform_device_add() should have already been initialised, either by platform_device_alloc() or platform_device_register(). Signed-off-by:
Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Shaohua Li authored
allow sysdev_class adding attribute. Next patch will use the new API to add an attribute under /sys/device/system/cpu/. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: -
David Brownell authored
This patch adds modalias support to platform devices, for simpler hotplug/coldplug driven driver setup. Signed-off-by:
-
David Brownell authored
The drivers/base/power PM debug messages should appear when either PM or driver model debug are enabled. Signed-off-by:
-
Stephen Hemminger authored
class_device_add needs to check the return value of all the setup it does. It doesn't handle out of memory well. This is not complete, probably more needs to be done. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Hansjoerg Lipp authored
Using the class device pointer returned by tty_register_device() with part 1 of the patch, attach the Gigaset drivers' "cidmode" sysfs entry to its tty class device, where it can be found more easily by users who do not know nor care which USB port the device is attached to. Signed-off-by:
Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Signed-off-by:
-
Hansjoerg Lipp authored
Let tty_register_device() return a pointer to the class device it creates. This allows registrants to add their own sysfs files under the class device node. Signed-off-by:
-
Kay Sievers authored
split bus_add_device() and send device uevents after sysfs population Signed-off-by:
-
Greg Kroah-Hartman authored
Signed-off-by: -
Greg Kroah-Hartman authored
Signed-off-by:
-
Greg Kroah-Hartman authored
These really need to be fixed, shout it out to the world. Signed-off-by: -
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (30 commits) [PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init() [PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug Controller Driver [PATCH] shpchp: Cleanup improper info messages [PATCH] shpchp: Remove Unused hpc_evelnt_lock [PATCH] shpchp: Cleanup interrupt polling timer [PATCH] shpchp: Cleanup SHPC commands [PATCH] shpchp: Cleanup interrupt handler [PATCH] shpchp: Remove unnecessary hpc_ctlr_handle check [PATCH] pciehp: Implement get_address callback [PATCH] pciehp: Add missing pci_dev_put [PATCH] pciehp: Replace pci_find_slot() with pci_get_slot() [PATCH] SGI Hotplug: Incorrect power status [PATCH] shpchp: Create shpchpd at controller probe time [PATCH] shpchp: Mask Global SERR and Intr at controller release time [PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits access [PATCH] SHPC: Fix SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register access [PATCH] SHPC: Cleanup SHPC register access [PATCH] pciehp: Fix programming hotplug parameters ...
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (85 commits) [SCSI] 53c700: remove reliance on deprecated cmnd fields [SCSI] hptiop: don't use cmnd->bufflen [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver [SCSI] aacraid: small misc. cleanups [SCSI] aacraid: Update supported product information [SCSI] aacraid: Fix return code interpretation [SCSI] scsi_transport_sas: fix panic in sas_free_rphy [SCSI] remove RQ_SCSI_* flags [SCSI] remove scsi_request infrastructure [SCSI] mptfusion: change driver revision to 3.03.10 [SCSI] mptfc: abort of board reset leaves port dead requiring reboot [SCSI] mptfc: fix fibre channel infinite request/response loop [SCSI] mptfc: set fibre channel fw target missing timers to one second [SCSI] mptfusion: move fc event/reset handling to mptfc [SCSI] spi transport: don't allow dt to be set on SE or HVD buses [SCSI] aic7xxx: expose the bus setting to sysfs [SCSI] scsi: remove Documentation/scsi/cpqfc.txt [SCSI] drivers/scsi: Use ARRAY_SIZE macro [SCSI] Remove last page_address from dc395x.c [SCSI] hptiop: HighPoint RocketRAID 3xxx controller driver ... Fixed up conflicts in drivers/message/fusion/mptbase.c manually (due to the sparc interrupt cleanups)
-
