- 06 Jan, 2009 40 commits
-
-
Hannes Eder authored
Fix this sparse warnings: drivers/video/intelfb/intelfbdrv.c:1497:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1525:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1544:3: warning: returning void-valued expression drivers/video/intelfb/intelfbdrv.c:1558:3: warning: returning void-valued expression Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hannes Eder authored
Fix this sparse warnings: drivers/video/i810/i810_accel.c:305:3: warning: returning void-valued expression drivers/video/i810/i810_accel.c:331:3: warning: returning void-valued expression drivers/video/i810/i810_accel.c:370:3: warning: returning void-valued expression Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings: drivers/video/neofb.c:1456:4: warning: returning void-valued expression drivers/video/neofb.c:1464:3: warning: returning void-valued expression Signed-off-by:
-
Hannes Eder authored
Fix this sparse warning: drivers/video/pm3fb.c:543:3: warning: returning void-valued expression Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings: drivers/video/via/viafbdev.c:871:3: warning: returning void-valued expression drivers/video/via/viafbdev.c:938:3: warning: returning void-valued expression drivers/video/via/viafbdev.c:995:3: warning: returning void-valued expression Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings: drivers/video/nvidia/nv_accel.c:304:3: warning: returning void-valued expression drivers/video/nvidia/nv_accel.c:323:3: warning: returning void-valued expression Signed-off-by:
-
roel kluin authored
unsigned var->pixclock cannot be less than 0 Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Harvey Harrison authored
drivers/video/carminefb.c:171:41: warning: cast to restricted __be32 Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
Jiri Moravec authored
When I viewed drivers/video/modedb.c, I noticed a very old typo already contained in 2.6.0. This typo remained unheeded at least 5 years. Clear evidence of its importance. ;) Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
Arjan van de Ven authored
Use the newly introduced pci_ioremap_bar() function in drivers/video. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
David Brownell authored
Minor updates to the pca953x GPIO expander driver: handle several more compatible parts, and stop assuming that the I2C layer's return codes are garbage (that's now been fixed). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by:
-
David Brownell authored
Provide a static debounce configuration mechanism for twl4030 GPIOs, replacing the previous dynamic one. The single user of that mechanism was for MMC card detect debouncing. Boards can provide a bitmask saying which GPIOs to debounce (30 msec). It's always enabled for pins with the MMC card-detect/VMMCx link active, so most boards won't need to set the debounce mask. This is a net code shrink, including runtime footprint. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Julia Lawall authored
rtc is clearly does not satisfy IS_ERR at the point where it is tested, so I have changed the test to consider the just initialized rtc->rtc_dev. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @match exists@ expression x, E; identifier fld; position p1,p2; @@ ( x = E; | x = E | x@p1->fld ... when != x = E IS_ERR(x@p2) ... when any ) @other_match exists@ expression match.x, E1, E2; position match.p1,match.p2; @@ x = E1 ... when != x = E2 when != x@p1 x@p2 @ script:python depends on !other_match@ p1 << match.p1; p2 << match.p2; @@ print "* file %s dereference %s test %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by:
-
Saeed Bishara authored
Driver for the on-chip RTC found in some of Marvell's SoCs such as the Kirkwood 88F6281 and 88F6192 devices. Signed-off-by:
Saeed Bishara <saeed@marvell.com> Signed-off-by:
Lennert Buytenhek <buytenh@marvell.com> Signed-off-by:
Nicolas Pitre <nico@marvell.com> Signed-off-by:
-
Alessandro Zummo authored
Fixes a few issues with the rtc-ds1216 driver - use rtc_valid_tm - use platform_driver_probe - fix init sequence - it was using rtc_unregister_driver where not needed. I also added resource_size and removed an useless pointer assignment. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Atsushi Nemoto authored
Add support for RTC in TX4939 SoC. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
-
Alessandro Zummo authored
Drivers should only need to implement either set_mmss (counter based RTCs) or set_time (most RTCs). The RTC subsystem will handle them appropriately. Signed-off-by:
-
Alessandro Zummo authored
- no changelogs in code - no banners - use local buffers - fix probe sequence - do not init .driver.bus Signed-off-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Alessandro Zummo authored
- no changelogs in code - no banners - use local buffers - fix probe sequence - fixed style issues - fix spi_write call - removed old debug code replaces http://patchwork.ozlabs.org/patch/9421/ and http://patchwork.ozlabs.org/patch/9455/Signed-off-by:
-
Manuel Lauss authored
Simple driver which uses the Au1xxx Time-Of-Year counter (counter0) as a 1Hz RTC. [akpm@linux-foundation.org: repair Kconfig] Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by:
-
Alessandro Zummo authored
Remove double spaces and adds some suggestions. It also fixes the descriptions of options that are no more available as modules. Signed-off-by:
-
Alessandro Zummo authored
Small fixes for the ds1390 driver - fixed initialization of the spi device - added missing includes - removed printks - removed useless wrappers for rtc ops - removed dead code Signed-off-by:
-
Alessandro Zummo authored
Small fixes for the pxa27x/pxa3xx driver - use platform_driver_probe - fixed exit paths - fixed probe sequence - added missing include - using linux/io.h instead of asm/io.h Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Robert Jarzmik authored
With PXA27x and above, a new RTC hardware block was added in addition to the legacy one which is also found on the SA1100 SOC family. This second RTC block is called "wristwatch" and "periodic interrupt" and works independently from the other RTC block. The driver offers provides : - a 1Hz ticking clock - a periodic alarm, in the 1Hz to 1000Hz range - a one shot alarm Signed-off-by:
-
Jonathan Cameron authored
Move the power of 2 check on frequencies down into individual rtc drivers This is to allow for non power of 2 real time clock periodic interrupts such as those on the pxa27x to be found in the new pxa27x-rtc driver Signed-off-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Anton Vorontsov authored
This patch fixes a bunch of irq checking misuses. Most drivers were getting irq via platform_get_irq(), which returns -ENXIO or r->start. rtc-cmos.c is special. It is using PNP and platform bindings. Hopefully nobody is using PNP IRQ 0 for RTC. So the changes should be safe. rtc-sh.c is using platform_get_irq, but was storing a result into an unsigned type, then was checking for < 0. This is fixed now. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Kay Sievers authored
Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Mike Frysinger authored
Blackfin platforms do not support the hardware which this driver drives. Signed-off-by:
Mike Frysinger <vapier.adi@gmail.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Acked-by:
-
Ian Kent authored
In function validate_dev_ioctl() we check that the string we've been sent is a valid path. The function that does this check assumes the string is NULL terminated but our NULL termination check isn't done until after this call. This patch changes the order of the check. Signed-off-by:
Ian Kent <raven@themaw.net> Acked-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Ian Kent authored
- the type assigned at mount when no type is given is changed from 0 to AUTOFS_TYPE_INDIRECT. This was done because 0 and AUTOFS_TYPE_INDIRECT were being treated implicitly as the same type. - previously, an offset mount had it's type set to AUTOFS_TYPE_DIRECT|AUTOFS_TYPE_OFFSET but the mount control re-implementation needs to be able distinguish all three types. So this was changed to make the type setting explicit. - a type AUTOFS_TYPE_ANY was added for use by the re-implementation when checking if a given path is a mountpoint. It's not really a type as we use this to ask if a given path is a mountpoint in the autofs_dev_ioctl_ismountpoint() function. - functions to set and test the autofs mount types have been added to improve readability and make the type usage explicit. - the mount type is used from user space for the mount control re-implementtion so, for consistency, all the definitions have been moved to the user space include file include/linux/auto_fs4.h. Signed-off-by:
-
Ian Kent authored
A local definition of devid in autofs_dev_ioctl_ismountpoint() shadows the fuction wide definition. Signed-off-by:
-
Ian Kent authored
The parameter usage in the device node ioctl code uses arg1 and arg2 as parameter names. This patch redefines the parameter names to reflect what they actually are in an effort to make the code more readable. Signed-off-by:
-
Qinghuang Feng authored
Arguments lower_dentry and ecryptfs_dentry in ecryptfs_create_underlying_file() have been merged into dentry, now fix it. Signed-off-by:
Qinghuang Feng <qhfeng.kernel@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
Flesh out the comments for ecryptfs_decode_from_filename(). Remove the return condition, since it is always 0. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Cc: Dustin Kirkland <dustin.kirkland@gmail.com> Cc: Eric Sandeen <sandeen@redhat.com> Cc: Tyler Hicks <tchicks@us.ibm.com> Cc: David Kleikamp <shaggy@us.ibm.com> Signed-off-by:
-
Michael Halcrow authored
Kerneldoc updates for ecryptfs_parse_tag_70_packet(). Signed-off-by:
-
Michael Halcrow authored
Correct several format string data type specifiers. Correct filename size data types; they should be size_t rather than int when passed as parameters to some other functions (although note that the filenames will never be larger than int). Signed-off-by:
-
Michael Halcrow authored
%Z is a gcc-ism. Using %z instead. Signed-off-by:
-
Michael Halcrow authored
Enable mount-wide filename encryption by providing the Filename Encryption Key (FNEK) signature as a mount option. Note that the ecryptfs-utils userspace package versions 61 or later support this option. When mounting with ecryptfs-utils version 61 or later, the mount helper will detect the availability of the passphrase-based filename encryption in the kernel (via the eCryptfs sysfs handle) and query the user interactively as to whether or not he wants to enable the feature for the mount. If the user enables filename encryption, the mount helper will then prompt for the FNEK signature that the user wishes to use, suggesting by default the signature for the mount passphrase that the user has already entered for encrypting the file contents. When not using the mount helper, the user can specify the signature for the passphrase key with the ecryptfs_fnek_sig= mount option. This key must be available in the user's keyring. The mount helper usually takes care of this step. If, however, the user is not mounting with the mount helper, then he will need to enter the passphrase key into his keyring with some other utility prior to mounting, such as ecryptfs-manager. Signed-off-by:
-
Michael Halcrow authored
Make the requisite modifications to ecryptfs_filldir(), ecryptfs_lookup(), and ecryptfs_readlink() to call out to filename encryption functions. Propagate filename encryption policy flags from mount-wide crypt_stat to inode crypt_stat. Signed-off-by:
-
