- 11 Jun, 2020 40 commits
-
-
Peter Zijlstra authored
Both #DB itself, as all other IST users (NMI, #MC) now clear DR7 on entry. Combined with not allowing breakpoints on entry/noinstr/NOKPROBE text and no single step (EFLAGS.TF) inside the #DB handler should guarantee no nested #DB. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20200529213321.303027161@infradead.org
-
Peter Zijlstra authored
This is all unused now. Signed-off-by:
-
Peter Zijlstra authored
Because DRn access is 'difficult' with virt; but the DR7 read is cheaper than a cacheline miss on native, add a virt specific fast path to local_db_save(), such that when breakpoints are not in use to avoid touching DRn entirely. Suggested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Peter Zijlstra authored
#MC is fragile as heck, don't tempt fate. Signed-off-by:
-
Peter Zijlstra authored
Instead of playing stupid games with IST stacks, fully disallow #DB during NMIs. There is absolutely no reason to allow them, and killing this saves a heap of trouble. #DB is already forbidden on noinstr and CEA, so there can't be a #DB before this. Disabling it right after nmi_enter() ensures that the full NMI code is protected. Signed-off-by:
-
Peter Zijlstra authored
In order to allow other exceptions than #DB to disable breakpoints, provide common helpers. Signed-off-by:
-
Lai Jiangshan authored
The per-CPU user_pcid_flush_mask is used in the low level entry code. A data breakpoint can cause #DB recursion. Protect the full cpu_tlbstate structure for simplicity. Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Signed-off-by:
-
Lai Jiangshan authored
cpu_tss_rw is not directly referenced by hardware, but cpu_tss_rw is accessed in CPU entry code, especially when #DB shifts its stacks. If a data breakpoint would be set on cpu_tss_rw.x86_tss.ist[IST_INDEX_DB], it would cause recursive #DB ending up in a double fault. Add it to the list of protected items. Signed-off-by:
-
Lai Jiangshan authored
A data breakpoint on the GDT can be fatal and must be avoided. The GDT in the CPU entry area is already protected, but not the direct GDT. Add the necessary protection. Signed-off-by:
-
Lai Jiangshan authored
Add a within_area() helper to checking whether the data breakpoints overlap with cpu_entry_area. It will be used to completely prevent data breakpoints on GDT, IDT, or TSS. Signed-off-by:
-
Vitaly Kuznetsov authored
Kbuild test robot reports the following problem on ARM: for 'xen_setup_callback_vector' [-Wmissing-prototypes] 1664 | void xen_setup_callback_vector(void) {} | ^~~~~~~~~~~~~~~~~~~~~~~~~ The problem is that xen_setup_callback_vector is a x86 only thing, its definition is present in arch/x86/xen/xen-ops.h but not on ARM. In events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared as 'static'. On x86 the situation is hardly better: drivers/xen/events/events_base.c doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake from include/xen/ which also results in a 'no previous prototype' warning. Currently, xen_setup_callback_vector() has two call sites: one in drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The former is placed under #ifdef CONFIG_X86 and the later is only compiled in when CONFIG_XEN_PVHVM. Resolve the issue by moving xen_setup_callback_vector() declaration to arch neutral 'include/xen/hvm.h' as the implementation lives in arch neutral drivers/xen/events/events_base.c. Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com
-
Thomas Gleixner authored
No more users. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
-
Thomas Gleixner authored
The last step to remove the irq tracing cruft from ASM. Ignore #DF as the maschine is going to die anyway. Signed-off-by:
-
Thomas Gleixner authored
Since INT3/#BP no longer runs on an IST, this workaround is no longer required. Tested by running lockdep+ftrace as described in the initial commit: 5963e317 ("ftrace/x86: Do not change stacks in DEBUG when calling lockdep") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
-
Thomas Gleixner authored
All exceptions/interrupts return with interrupts disabled now. No point in doing this in ASM again. Signed-off-by:
-
Thomas Gleixner authored
The ASM users are gone. All callers are local. Signed-off-by:
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
Remove all the code which was there to emit the system vector stubs. All users are gone. Move the now unused GET_CR2_INTO macro muck to head_64.S where the last user is. Fixup the eye hurting comment there while at it. Signed-off-by:
-
Thomas Gleixner authored
The scheduler IPI does not need the full interrupt entry handling logic when the entry is from kernel mode. Use IDTENTRY_SYSVEC_SIMPLE and spare all the overhead. Signed-off-by:
-
Thomas Gleixner authored
Convert the last oldstyle defined vector to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes Fixup the related XEN code by providing the primary C entry point in x86 to avoid cluttering the generic code with X86'isms. No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert various hypervisor vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20200521202119.647997594@linutronix.de
-
Thomas Gleixner authored
Convert KVM specific system vectors to IDTENTRY_SYSVEC*: The two empty stub handlers which only increment the stats counter do no need to run on the interrupt stack. Use IDTENTRY_SYSVEC_SIMPLE for them. The wakeup handler does more work and runs on the interrupt stack. None of these handlers need to save and restore the irq_regs pointer. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
-
Thomas Gleixner authored
Convert various system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert SMP system vectors to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
Thomas Gleixner authored
Convert APIC interrupts to IDTENTRY_SYSVEC: - Implement the C entry point with DEFINE_IDTENTRY_SYSVEC - Emit the ASM stub with DECLARE_IDTENTRY_SYSVEC - Remove the ASM idtentries in 64-bit - Remove the BUILD_INTERRUPT entries in 32-bit - Remove the old prototypes No functional change. Signed-off-by:
-
Thomas Gleixner authored
Provide IDTENTRY variants for system vectors to consolidate the different mechanisms to emit the ASM stubs for 32- and 64-bit. On 64-bit this also moves the stack switching from ASM to C code. 32-bit will excute the system vectors w/o stack switching as before. The simple variant is meant for "empty" system vectors like scheduler IPI and KVM posted interrupt vectors. These do not need the full glory of irq enter/exit handling with softirq processing and more. Signed-off-by:
-
Thomas Gleixner authored
Replace the extra interrupt handling code and reuse the existing idtentry machinery. This moves the irq stack switching on 64-bit from ASM to C code; 32-bit already does the stack switching in C. This requires to remove HAVE_IRQ_EXIT_ON_IRQ_STACK as the stack switch is not longer in the low level entry code. Signed-off-by:
-
Thomas Gleixner authored
Provide a seperate IDTENTRY macro for device interrupts. Similar to IDTENTRY_ERRORCODE with the addition of invoking irq_enter/exit_rcu() and providing the errorcode as a 'u8' argument to the C function, which truncates the sign extended vector number. Signed-off-by:
-
Thomas Gleixner authored
To consolidate the interrupt entry/exit code vs. the other exceptions make handle_irq() an inline and handle both 64-bit and 32-bit mode. Preparatory change to move irq stack switching for 64-bit to C which allows to consolidate the entry exit handling by reusing the idtentry machinery both in ASM and C. Signed-off-by:
-
Thomas Gleixner authored
Device interrupts which go through do_IRQ() or the spurious interrupt handler have their separate entry code on 64 bit for no good reason. Both 32 and 64 bit transport the vector number through ORIG_[RE]AX in pt_regs. Further the vector number is forced to fit into an u8 and is complemented and offset by 0x80 so it's in the signed character range. Otherwise GAS would expand the pushq to a 5 byte instruction for any vector > 0x7F. Treat the vector number like an error code and hand it to the C function as argument. This allows to get rid of the extra entry code in a later step. Simplify the error code push magic by implementing the pushq imm8 via a '.byte 0x6a, vector' sequence so GAS is not able to screw it up. As the pushq imm8 is sign extending the resulting error code needs to be truncated to 8 bits in C code. Originally-by:
-
Thomas Gleixner authored
The only difference is the name of the per-CPU variable: irq_regs vs. __irq_regs, but the accessor functions are identical. Remove the pointless copy and use the generic variant. Signed-off-by:
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
No more users. Signed-off-by:
-
Thomas Gleixner authored
xen_failsafe_callback() is invoked from XEN for two cases: 1. Fault while reloading DS, ES, FS or GS 2. Fault while executing IRET #1 retries the IRET after XEN has fixed up the segments. #2 injects a #GP which kills the task For #1 there is no reason to go through the full exception return path because the tasks TIF state is still the same. So just going straight to the IRET path is good enough. Signed-off-by:
-
Thomas Gleixner authored
Now that all exceptions are converted over the sane flag is not longer needed. Also the vector argument of idtentry_body on 64-bit is pointless now. Signed-off-by:
-
Thomas Gleixner authored
Convert page fault exceptions to IDTENTRY_RAW: - Implement the C entry point with DEFINE_IDTENTRY_RAW - Add the CR2 read into the exception handler - Add the idtentry_enter/exit_cond_rcu() invocations in in the regular page fault handler and in the async PF part. - Emit the ASM stub with DECLARE_IDTENTRY_RAW - Remove the ASM idtentry in 64-bit - Remove the CR2 read from 64-bit - Remove the open coded ASM entry code in 32-bit - Fix up the XEN/PV code - Remove the old prototypes No functional change. Signed-off-by: -
Thomas Gleixner authored
All C functions which do not have an error code have been converted to the new IDTENTRY interface which does not expect an error code in the arguments. Spare the XORL. Signed-off-by:
-
Thomas Gleixner authored
Convert the XEN/PV hypercall to IDTENTRY: - Emit the ASM stub with DECLARE_IDTENTRY - Remove the ASM idtentry in 64-bit - Remove the open coded ASM entry code in 32-bit - Remove the old prototypes The handler stubs need to stay in ASM code as they need corner case handling and adjustment of the stack pointer. Provide a new C function which invokes the entry/exit handling and calls into the XEN handler on the interrupt stack if required. The exit code is slightly different from the regular idtentry_exit() on non-preemptible kernels. If the hypercall is preemptible and need_resched() is set then XEN provides a preempt hypercall scheduling function. Move this functionality into the entry code so it can use the existing idtentry functionality. [ mingo: Build fixes. ] Signed-off-by:
-
Thomas Gleixner authored
The XEN PV hypercall requires the ability of conditional rescheduling when preemption is disabled because some hypercalls take ages. Split out the rescheduling code from idtentry_exit_cond_rcu() so it can be reused for that. Signed-off-by:
-
Thomas Gleixner authored
The first step to get rid of the ENTER/LEAVE_IRQ_STACK ASM macro maze. Use the new C code helpers to move do_softirq_own_stack() out of ASM code. Signed-off-by:
-
