Fix the conditions under which we poke at the APHY registers in
bcm43xx_phy_initg() to avoid a machine check on chips where they don't
exist.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The problem here is that the bcm34xx driver and the ieee80211
stack do not agree on what channels are possible for 802.11a.
The ieee80211 stack only wants channels between 34 and 165, while
the bcm43xx driver accepts anything from 0 to 200. I made the
bcm43xx driver comply with the ieee80211 stack expectations, by
using the proper constants.
Signed-off-by: Jean Delvare <jdelvare@suse.de>

[mb]: Reduce stack usage by kzalloc-ing ieee80211_geo
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Check for valid MAC address in SPROM fields instead of relying on
PHY type while setting the MAC address in the networking subsystem,
as some devices have multiple PHYs.
Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The channel count for 802.11a is still not right. We better
compute it from the min and max channel numbers, rather than
hardcoding it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This fixes a crash when

	iwconfig ethX mode foo

is done before

	ifconfig ethX up

or after

	ifconfig ethX down
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

zd1211 with softmac and wpa_supplicant revealed an issue with softmac
and the use of workqueues. Some of the work functions actually
reschedule themselves, so this meant that there could still be
pending work after flush_scheduled_work() had been called during
ieee80211softmac_stop().

This patch introduces a "running" flag which is used to ensure that
rescheduling does not happen in this situation.

I also used this flag to ensure that softmac's hooks into ieee80211 are
non-operational once the stop operation has been started. This simply
makes softmac a little more robust, because I could crash it easily
by receiving frames in the short timeframe after shutting down softmac
and before turning off the ZD1211 radio. (ZD1211 is now fixed as well!)
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When wpa_supplicant exits, it uses SIOCSIWMLME to request
deauthentication.  softmac then tries to reassociate without any user
intervention, which isn't the desired behaviour of this signal.

This change makes softmac only attempt reassociation if the remote
network itself deauthenticated us.
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: Use the ibm,pa-features property if available
  powerpc: Fix incorrect might_sleep in __get_user/__put_user on kernel addresses
  [PATCH] ppc32 CPM_UART: fixes and improvements
  [PATCH] ppc32 CPM_UART: Fixed break send on SCC
  [PATCH] powerpc/kprobes: fix singlestep out-of-line
  [PATCH] powerpc/pseries: avoid crash in PCI code if mem system not up

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3490/1: i.MX: move uart resources to board files
  [ARM] 3488/1: make icedcc_putc do the right thing
  [ARM] 3487/1: IXP4xx: Support non-PCI systems
  [ARM] 3486/1: Mark memory as clobbered by the ARM _syscallX() macros

* master.kernel.org:/home/rmk/linux-2.6-mmc:
  [MMC] Move set_ios debugging into mmc.c
  [MMC] Correct mmc_request_done comments
  [MMC] PXA: reduce the number of lines PXAMCI debug uses
  [MMC] PXA and i.MX: don't avoid sending stop command on error
  [MMC] extend data timeout for writes
  [ARM] 3485/1: i.MX: MX1 SD/MMC fix of unintentional double start possibility

* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] compat_sys_vmsplice: one-off in UIO_MAXIOV check
  [PATCH] splice: redo page lookup if add_to_page_cache() returns -EEXIST
  [PATCH] splice: rename remaining info variables to pipe
  [PATCH] splice: LRU fixups
  [PATCH] splice: fix unlocking of page on error ->prepare_write()

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [DECNET]: Fix level1 router hello
  [TCP]: Fix sock_orphan dead lock
  [ROSE]: Eleminate HZ from ROSE kernel interfaces
  [NETROM]: Eleminate HZ from NET/ROM kernel interfaces
  [AX.25]: Eleminate HZ from AX.25 kernel interfaces
  [ROSE]: Fix routing table locking in rose_remove_neigh.
  [AX.25]: Move AX.25 symbol exports
  [HAMRADIO]: Remove remaining SET_MODULE_OWNER calls from hamradio drivers.
  [AX25, ROSE]: Remove useless SET_MODULE_OWNER calls.
  [AX.25]: Spelling fix
  [ROSE]: Remove useless prototype for rose_remove_neigh().
  [NETFILTER]: x_tables: don't use __copy_{from,to}_user on unchecked memory in compat layer
  [NETFILTER]: H.323 helper: Change author's email address
  [NETFILTER]: NAT: silence unused variable warnings with CONFIG_XFRM=n
  [NETFILTER]: H.323 helper: fix use of uninitialized data
  [NETFILTER]: H.323 helper: fix endless loop caused by invalid TPKT len

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Hook up vmsplice into syscall tables.

By request from Tristan.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rather than having every driver duplicate the set_ios debugging,
provide a single version in mmc.c which can be expanded as we
add additional functionality.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Sascha Hauer

This patch moves the i.MX uart resources and the gpio pin setup to the
board files. This allows the boards to decide how many internal uarts
are connected to the outside world and whether they use rts/cts or
not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

mmc_request_done should be called at the end of handling a request, not
between the data and initial command parts of the request.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

nr_segs may not be > UIO_MAXIOV, however it may be equal to. This makes
the behaviour identical to the real sys_vmsplice(). The other foov
syscalls also agree that this is the way to go.
Signed-off-by: Jens Axboe <axboe@suse.de>

This patch fixes hello messages sent when a node is a level 1
router. Slightly contrary to the spec (maybe) VMS ignores hello
messages that do not name level2 routers that it also knows about.

So, here we simply name all the routers that the node knows about
rather just other level1 routers.  (I hope the patch is clearer than
the description. sorry).
Signed-off-by: Patrick Caulfield <patrick@tykepenguin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Calling sock_orphan inside bh_lock_sock in tcp_close can lead to dead
locks.  For example, the inet_diag code holds sk_callback_lock without
disabling BH.  If an inbound packet arrives during that admittedly tiny
window, it will cause a dead lock on bh_lock_sock.  Another possible
path would be through sock_wfree if the network device driver frees the
tx skb in process context with BH enabled.

We can fix this by moving sock_orphan out of bh_lock_sock.

The tricky bit is to work out when we need to destroy the socket
ourselves and when it has already been destroyed by someone else.

By moving sock_orphan before the release_sock we can solve this
problem.  This is because as long as we own the socket lock its
state cannot change.

So we simply record the socket state before the release_sock
and then check the state again after we regain the socket lock.
If the socket state has transitioned to TCP_CLOSE in the time being,
we know that the socket has been destroyed.  Otherwise the socket is
still ours to keep.

Note that I've also moved the increment on the orphan count forward.
This may look like a problem as we're increasing it even if the socket
is just about to be destroyed where it'll be decreased again.  However,
this simply enlarges a window that already exists.  This also changes
the orphan count test by one.

Considering what the orphan count is meant to do this is no big deal.

This problem was discoverd by Ingo Molnar using his lock validator.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all ROSE sysctl time values from jiffies to ms as units.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all NET/ROM sysctl time values from jiffies to ms as units.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all AX.25 sysctl time values from jiffies to ms as units.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The locking rule for rose_remove_neigh() are that the caller needs to
hold rose_neigh_list_lock, so we better don't take it yet again in
rose_neigh_list_lock.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move AX.25 symbol exports to next to their definitions where they're
supposed to be these days.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Jing Min Zhao <zhaojingmin@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv4/netfilter/ip_nat_standalone.c: In function 'ip_nat_out':
net/ipv4/netfilter/ip_nat_standalone.c:223: warning: unused variable 'ctinfo'
net/ipv4/netfilter/ip_nat_standalone.c:222: warning: unused variable 'ct'

Surprisingly no complaints so far ..
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a Choice element contains an unsupported choice no error is returned
and parsing continues normally, but the choice value is not set and
contains data from the last parsed message. This may in turn lead to
parsing of more stale data and following crashes.

Fixes a crash triggered by testcase 0003243 from the PROTOS c07-h2250v4
testsuite following random other testcases:

CPU:    0
EIP:    0060:[<c01a9554>]    Not tainted VLI
EFLAGS: 00210646   (2.6.17-rc2 #3)
EIP is at memmove+0x19/0x22
eax: d7be0307   ebx: d7be0307   ecx: e841fcf9   edx: d7be0307
esi: bfffffff   edi: bfffffff   ebp: da5eb980   esp: c0347e2c
ds: 007b   es: 007b   ss: 0068
Process events/0 (pid: 4, threadinfo=c0347000 task=dff86a90)
Stack: <0>00000006 c0347ea6 d7be0301 e09a6b2c 00000006 da5eb980 d7be003e d7be0052
       c0347f6c e09a6d9c 00000006 c0347ea6 00000006 00000000 d7b9a548 00000000
       c0347f6c d7b9a548 00000004 e0a1a119 0000028f 00000006 c0347ea6 00000006
Call Trace:
 [<e09a6b2c>] mangle_contents+0x40/0xd8 [ip_nat]
 [<e09a6d9c>] ip_nat_mangle_tcp_packet+0xa1/0x191 [ip_nat]
 [<e0a1a119>] set_addr+0x60/0x14d [ip_nat_h323]
 [<e0ab6e66>] q931_help+0x2da/0x71a [ip_conntrack_h323]
 [<e0ab6e98>] q931_help+0x30c/0x71a [ip_conntrack_h323]
 [<e09af242>] ip_conntrack_help+0x22/0x2f [ip_conntrack]
 [<c022934a>] nf_iterate+0x2e/0x5f
 [<c025d357>] xfrm4_output_finish+0x0/0x39f
 [<c02294ce>] nf_hook_slow+0x42/0xb0
 [<c025d357>] xfrm4_output_finish+0x0/0x39f
 [<c025d732>] xfrm4_output+0x3c/0x4e
 [<c025d357>] xfrm4_output_finish+0x0/0x39f
 [<c0230370>] ip_forward+0x1c2/0x1fa
 [<c022f417>] ip_rcv+0x388/0x3b5
 [<c02188f9>] netif_receive_skb+0x2bc/0x2ec
 [<c0218994>] process_backlog+0x6b/0xd0
 [<c021675a>] net_rx_action+0x4b/0xb7
 [<c0115606>] __do_softirq+0x35/0x7d
 [<c0104294>] do_softirq+0x38/0x3f
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the TPKT len included in the packet is below the lowest valid value
of 4 an underflow occurs which results in an endless loop.

Found by testcase 0000058 from the PROTOS c07-h2250v4 testsuite.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This can happen quite easily, if several processes are trying to splice
the same file at the same time. It's not a failure, it just means someone
raced with us in allocating this file page. So just dump the allocated
page and relookup the original.
Signed-off-by: Jens Axboe <axboe@suse.de>

Same thing was done in fs/pipe.c and most of fs/splice.c, but we had
a few missing still.
Signed-off-by: Jens Axboe <axboe@suse.de>

Nick says that the current construct isn't safe. This goes back to the
original, but sets PIPE_BUF_FLAG_LRU on user pages as well as they all
seem to be on the LRU in the first place.
Signed-off-by: Jens Axboe <axboe@suse.de>

Looking at generic_file_buffered_write(), we need to unlock_page() if
prepare write fails and it isn't due to racing with truncate().

Also trim the size if ->prepare_write() fails, if we have to.
Signed-off-by: Jens Axboe <axboe@suse.de>