- 22 Oct, 2018 17 commits
-
-
Rodrigo Vivi authored
No functional change. Just sorting this "if" block from newer to older platform. v2: Invert gen9_bc and gen9_lp (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181022171526.15641-1-rodrigo.vivi@intel.com
-
Madhav Chauhan authored
This patch defines DSI_CMD_RXCTL, DSI_CMD_TXCTL registers, bitfields, masks and macros used for configuring DSI panel. v2: Define remaining bitfields v3 by Jani: - Alignment fix Signed-off-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/37b41fe08ce50c3d9ef7d55c03d12a8a10a252d6.1539613303.git.jani.nikula@intel.com
-
Madhav Chauhan authored
This patch enables DSI transcoders by writing to TRANS_CONF registers and wait for its state to be enabled. v2 by Jani: - Rebase Signed-off-by:
-
Madhav Chauhan authored
This patch defines TRANS_CONF registers for DSI ports 0 and 1. Bitfields of these registers used for enabling and reading the current state of transcoder. v2: Add blank line before comment v3 by Jani: - Move DSI specific .pipe_offsets to GEN11_FEATURES - Macro placement and comment juggling Signed-off-by:
-
Madhav Chauhan authored
As part of DSI enable sequence, transcoder timings (horizontal & vertical) need to be set so that transcoder will generate the stream output as per those timings. This patch set required transcoder timings as per BSPEC. v2: Remove TRANS_TIMING_SHIFT usage v3 by Jani: - Rebase - Reduce temp variable use - Checkpatch fix Signed-off-by:
-
Madhav Chauhan authored
This patch defines registers and bitfields used for programming DSI transcoder's horizontal and vertical timings. v2: Remove TRANS_TIMING_SHIFT definition v3 by Jani: - Group macros by transcoder Signed-off-by:
-
Madhav Chauhan authored
This patch select input PIPE for DSI, data lanes width, enable port sync mode and wait for DSI link to become ready. v2 by Jani: - Use MISSING_CASE with fallthrough instead of DRM_ERROR - minor stylistic changes Signed-off-by:
-
Madhav Chauhan authored
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2 registers and their bitfields for DSI. These registers are used for enabling port sync mode, input pipe select, data lane width configuration etc. v2: Changes: - Remove redundant extra line - Correct some of bitfield definition v3 by Jani: - Move DSI transcoder offsets to GEN11_FEATURES Signed-off-by: -
Michal Wajdeczko authored
We wrongly assumed that GuC is only using last scratch register for G2H messages, but in fact it is also using register [14] to report sleep state status. Remove that register from our H2G send registers pool. v2: No message from host to GuC uses more than 8 registers and the GuC FW itself uses an 8-element array to store the H2G message, so we may reduce our send array to just 8 registers (Daniele) v3: use explicit define (Daniele) v4: and explicit comment (Daniele) Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com
-
Madhav Chauhan authored
This patch programs DSI operation mode, pixel format, BGR info, link calibration etc for the DSI transcoder. This patch also extract BGR info of the DSI panel from VBT and save it inside struct intel_dsi which used for configuring DSI transcoder. v2: Rebase v3: Use newly defined bitfields. v4 by Jani: - Use intel_dsi_bitrate() - Make bgr_enabled bool - Use 0 instead of 0x0 - Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode - Use is_vid_mode() Signed-off-by:
-
Madhav Chauhan authored
This patch defines transcoder function configuration registers and its bitfields for both DSI ports. Used while programming/enabling DSI transcoder. v2: Changes (Jani N) - Define _SHIFT and _MASK for bitfields - Define values for fields already shifted in place v3 by Jani: - Fix _SHIFT fields copy-pasted from _MASK - Indentation fixes - Reduce S3D orientation to single macro - Wrap a macro parameter in parens Signed-off-by: -
Madhav Chauhan authored
This patch adds _MMIO_DSI macros for accessing DSI transcoder registers. v2: Use _MMIO_TRANS() (Ville) Credits-to: Jani N Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Madhav Chauhan authored
This patch adds a helper function to retrieve DSI transcoder for a given DSI port using newly defined enum names for DSI transcoders. Signed-off-by:
-
Madhav Chauhan authored
This patch programs D-PHY timing parameters for the bus turn around flow(in escape clocks) only if dsi link frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its identical register DSI_TA_TIMING_PARAM (inside DSI Controller within the Display Core). v2: Changes - Don't use KHz() macro (Ville/Jani N) - Use newly defined bitfields v3 by Jani: - Use intel_dsi_bitrate() in favor of a new field - Remove redundant parens Signed-off-by: -
Madhav Chauhan authored
This patch programs D-PHY timing parameters for the clock and data lane (in escape clocks) of DSI controller (DSI port 0 and 1). These programmed timings would be used by DSI Controller to calculate link transition latencies of the data and clock lanes. v2: Use newly defined bitfields for data and clock lane v3 by Jani: - Rebase on dphy abstraction - Reduce local variables - Remove unrelated comment changes (Ville) - Use the same style for range checks as VLV (Ville) - Assign, don't OR dphy_reg contents Signed-off-by:
-
Madhav Chauhan authored
This patch moves couple of legacy DSI functions to header and common DSI files so that they can be re-used by Gen11 DSI. No functional change. v2 by Jani: - Move intel_dsi_msleep() to intel_dsi_vbt.c Signed-off-by:
-
Jani Nikula authored
Will be needed in the future. No functional changes. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
-
- 19 Oct, 2018 1 commit
-
-
Xiong Zhang authored
Currently the guest couldn't boot up under GVT-g environment as the following call trace exists: [ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 [ 272.504834] Call Trace: [ 272.504852] execlists_context_pin+0x2b2/0x520 [i915] [ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915] [ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915] [ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915] [ 272.504916] elsp_mmio_write+0xc7/0x130 [i915] [ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915] [ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915] [ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt] [ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt] GVT GEM context is created by i915_gem_context_create_gvt() which doesn't allocate ppgtt. So GVT GEM context structure doesn't have a valid i915_hw_ppgtt. This patch create ppgtt table at GVT GEM context creation, then assign shadow ppgtt's root table address to this ppgtt when shadow ppgtt will be used on GPU. So GVT GEM context has valid ppgtt address. But note that this ppgtt only contain valid ppgtt root table address, the table entry in this ppgtt structure are invalid. Fixes:4a3d3f67("drm/i915: Match code to comment and enforce ppgtt for execlists") Signed-off-by:
Xiong Zhang <xiong.y.zhang@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
-
- 18 Oct, 2018 10 commits
-
-
Ville Syrjälä authored
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when populating rotated vmas. One random access mechanism ought to be enough for everyone? To calculate the size of the radix tree I think we can do something like this (assuming 64bit pointers): num_pages = obj_size / 4096 tree_height = ceil(log64(num_pages)) num_nodes = sum(64^n, n, 0, tree_height-1) tree_size = num_nodes * 576 If we compare that with the object size we should get a relative overhead of around .2% to 1% for reasonable sized objects, which framebuffers tend to be. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Suggested-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com>
-
Joonas Lahtinen authored
Use single exit point to drop rpm wakeref in case of an error. Fixes: 9d3eb2c3 ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set") Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniele Ceraolo Spurio authored
The test requires driver tweaks to avoid causing error messages on intentionally-triggered errors and to stop accessing non existing register. However, this is a pure GuC FW interface test and should be covered by FW validation, so it isn't really worth tweaking the driver for it and we're better off dropping it instead. Testing the driver running out of doorbells is already covered by igt_guc_doorbells Suggested-by:
-
Jani Nikula authored
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be modified due to ICL DSI. Abstract out the VLV specific dphy param init. No functional changes. Intentionally no stylistic changes during code movement. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Abstract bitrate calculation to a newly resurrected intel_dsi.c file that will contain common code for VLV and ICL DSI. No functional changes. Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Encoders are not alike, make enable and disable hooks optional like other hooks. Utilize this in DSI code, and remove the silly nop hook. v2: Add the check also to intel_sanitize_encoder() (Madhav) Reviewed-by:
-
Jani Nikula authored
Pass the type we want to simplify. No functional changes. v2: s/dev_priv/i915/g (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Michal Wajdeczko authored
In response for I915_PARAM_HAS_HUC we are returning value that indicates if HuC firmware was loaded and verified. However, our previously used positive value was based on specific register bit which is about to change on future platform. Let's normalize our return values to 0 and 1 before clients will start to use Gen9 value. v2: use bool for implicit conversion (Chris) Signed-off-by:
-
Tvrtko Ursulin authored
GEM_WARN_ON currently has dangerous semantics where it is completely compiled out on !GEM_DEBUG builds. This can leave users who expect it to be more like a WARN_ON, just without a warning in non-debug builds, in complete ignorance. Another gotcha with it is that it cannot be used as a statement. Which is again different from a standard kernel WARN_ON. This patch fixes both problems by making it behave as one would expect. It can now be used both as an expression and as statement, and also the condition evaluates properly in all builds - code under the conditional will therefore not unexpectedly disappear. To satisfy call sites which really want the code under the conditional to completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the callers to it. This one can also be used as both expression and statement. >From the above it follows GEM_DEBUG_WARN_ON should be used in situations where we are certain the condition will be hit during development, but at a place in code where error can be handled to the benefit of not crashing the machine. GEM_WARN_ON on the other hand should be used where condition may happen in production and we just want to distinguish the level of debugging output emitted between the production and debug build. v2: * Dropped BUG_ON hunk. Signed-off-by:
Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
-
Rodrigo Vivi authored
Since when it was introduced we forgot to add this case so ICL was using a wrong signal_levels as reference. Fixes: fb5c8e9d ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
-
- 17 Oct, 2018 9 commits
-
-
Lyude Paul authored
Unfortunately, it appears our fix in: commit b5d29843 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d802739 ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d802739 ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
-
Daniele Ceraolo Spurio authored
The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC FW and then return, so waiting on the H2G is not enough to guarantee GuC is done. When all the processing is done, GuC writes 0 to scratch register 14, so we can poll on that. Note that GuC does not ensure that the value in the register is different from 0 while the action is in progress so we need to take care of that ourselves as well. v2: improve comment, return early on GuC error and improve error message (Michal) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: -
Maarten Lankhorst authored
Wait for idle, and iterate over connectors instead of encoders. With this information we know crtc->state is the actual state, and we can enable/disable drrs safely. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181011100457.8776-2-maarten.lankhorst@linux.intel.comReviewed-by:
-
Imre Deak authored
If BIOS configured a Y tiled FB we failed to set up the backing object tiling accordingly, leading to a lack of GT fence installed and a garbled console. The problem was bisected to commit 011f22eb ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2") but it just revealed a pre-existing issue. Kudos to Ville who suspected a missing fence looking at the corruption on the screen. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: <ronald@innovation.ch> Cc: <stable@vger.kernel.org> Reported-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by: <ronald@innovation.ch> Tested-by: <ronald@innovation.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264 Fixes: bc8d7dff ("drm/i915/skl: Provide a Skylake version of get_plane_config()") Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Michal Wajdeczko authored
In commit 4502e9ec ("drm/i915/uc: Unify firmware loading") we stopped converting errors detected during firmware transfer into -EAGAIN and this indirectly killed our workarounds for Gen9 GuC. Reactivate those workarounds by looking for actual -ETIMEDOUT error. Testcase: igt@drv_selftest@live_hangcheck Reported-by:
-
Jani Nikula authored
Reduce intel_display.c by splitting out intel_quirks.c. No functional changes. Reviewed-by:
-
Jani Nikula authored
Clang build with UBSAN enabled leads to the following build error: drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist': drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411' Again, for this to work the code would first need to be inlined and then constant folded, which doesn't work for Clang because semantic analysis happens before optimization/inlining. Use GEM_BUG_ON() instead of BUILD_BUG_ON(). v2: Use is_power_of_2() from log2.h (Chris) References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.orgReported-by:
Stephen Boyd <swboyd@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Jani Nikula authored
When building the kernel with Clang with defconfig and CONFIG_64BIT disabled, vmlinux fails to link because of the BUILD_BUG in _print_param. ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump': i915_params.c:(.text+0x56): undefined reference to `__compiletime_assert_191' This function is semantically invalid unless the code is first inlined then constant folded, which doesn't work for Clang because semantic analysis happens before optimization/inlining. [The above written by Nathan Chancellor <natechancellor@gmail.com>] Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The WARN_ONCE() should get optimized away unless there's a type that's not handled by _print_param(). References: https://github.com/ClangBuiltLinux/linux/issues/191 References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
-
Jani Nikula authored
Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and move it near its connector function friends in intel_connector.c. No functional changes. Reviewed-by:
-
- 16 Oct, 2018 3 commits
-
-
Mahesh Kumar authored
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
combo-phy register instances are at same offset from base for each combo-phy port, i.e. Port A base offset: 0x16200 Port B base offset: 0x6C000 All the other addresses for both ports can be derived by calculating offset to these base addresses. PORT_CL_DW_OFFSET 0x0 PORT_CL_DW<x> 0 + x * 4 PORT_COMP_OFFSET 0x100 PORT_COMP_DW<x> 0x100 + x * 4 PORT_PCS_AUX_OFFSET 0x300 PORT_PCS_GRP_OFFSET 0x600 PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100 PORT_TX_AUX_OFFSET 0x380 PORT_TX_GRP_OFFSET 0x680 PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100 And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`. Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>. v2: make port, dw and ln arguments follow the order in register's name Signed-off-by: -
Mahesh Kumar authored
This patch combines CNL/ICL specific port/combophy macros together at one location. This is prework for patches later in series where new macros to find port/combophy register will be introduced. v2: remove wrong empty line Signed-off-by:
-
