- 12 Sep, 2018 4 commits
-
-
Intiyaz Basha authored
Control packets are processed in tasklet when interface is down and in NAPI when interface is up. So tasklet can be disabled when interface up and re-enabled when interface is down. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just remove the condition check before debugfs_remove_recursive. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
zhong jiang authored
debugfs_remove_recursive has taken the IS_ERR_OR_NULL into account. Just remove the unnecessary condition check. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The "pause" variable is only initialized on BCM5301x. Fixes: 5e004460 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Sep, 2018 21 commits
-
-
Cong Wang authored
cl->leaf.q is slightly more readable than cl->un.leaf.q. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
We no longer take any spinlock on RX path for ingress qdisc, so this lockdep annotation is no longer needed. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Change flower in_hw_count type to fixed-size u32 and dump it as TCA_FLOWER_IN_HW_COUNT. This change is necessary to properly test shared blocks and re-offload functionality. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Miller says: ==================== SKB list handling cleanups This is a preparatory patch series which cleans up various forms of sloppy SKB list handling, and makes certain semantics explicit. We are trying to eliminate code that directly accesses the SKB list and SKB queue head next/prev members in any way. It is impossible to convert SKB queue head over the struct list_head while such code exists. This patch series does not eliminate all such code, only the simplest cases. A latter series will tackle the complicated ones. A helper is added to make the "skb->next == NULL means not on a list" rule explicit, and another is added to combine this with list_del(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eliminate the assumption that SKBs and SKB list heads can be cast to eachother in SKB list handling code. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Eliminate code which assumes that SKBs and skb_queue_head objects can be cast to eachother during list processing. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
It documents what is happening, and eliminates the spurious list pointer poisoning. In the long term, in order to get proper list head debugging, we might want to use the list poison value as the indicator that an SKB is a singleton and not on a list. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
An SKB is not on a list if skb->next is NULL. Codify this convention into a helper function and use it where we are dequeueing an SKB and need to mark it as such. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of direct SKB list pointer accesses. In these situations, we absolutely know that the SKB queue in question is non-empty. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of direct list head pointer accesses. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of direct list pointer accesses. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of direct skb_queue_head pointer accesses. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Use skb_queue_walk() instead. Adjust inner loop test to utilize and skb_queue_is_first(). Unfortunately we have to keep pkt_cnt around because it is used by a latter loop in this function. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Use __skb_peek() instead. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Add a helper, __skb_peek(), and use it in ppp_mp_reconstruct(). Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of direct SKB list accesses. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
By hand copies of SKB list handlers do not belong in individual packet schedulers. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead, adjust __qdisc_enqueue_tail() such that HTB can use it instead. The only other caller of __qdisc_enqueue_tail() is qdisc_enqueue_tail() so we can move the backlog and return value handling (which HTB doesn't need/want) to the latter. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
After the conversion to fib6_info, rt6i_prefsrc has a single user that reads the value and otherwise it is only set. The one reader can be converted to use rt->from so rt6i_prefsrc can be removed, reducing rt6_info by another 20 bytes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
A recent commit updated vlan_cmd.dropnovlan_fm but failed to remove the older assignment. Fix this by removing the former redundant assignment. Detected by CoverityScan, CID#1473290 ("Unused value") Fixes: a89cdd8e ("cxgb4: impose mandatory VLAN usage when non-zero TAG ID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Sep, 2018 9 commits
-
-
YueHaibing authored
if failover_register failed, 'err' code should be set correctly Fixes: cfc80d9a ("net: Introduce net_failover driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jose Abreu authored
GMAC >= 4 also supports CBS. Lets enable the TC Ops for these versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
According to the new locking rule, we have to take tcf_lock for both ->init() and ->dump(), as RTNL will be removed. Use tcf spinlock to protect private nat action data from concurrent modification during dump. (nat init already uses tcf spinlock when changing action state) Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
According to the new locking rule, we have to take tcf_lock for both ->init() and ->dump(), as RTNL will be removed. Use tcf lock to protect skbedit action struct private data from concurrent modification in init and dump. Use rcu swap operation to reassign params pointer under protection of tcf lock. (old params value is not used by init, so there is no need of standalone rcu dereference step) Remove rtnl lock assertion that is no longer required. Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
Essentially reverts commit 8fd75c58 ("i40e: move ethtool stats boiler plate code to i40e_ethtool_stats.h", 2018-08-30), and additionally moves the similar code in i40evf into i40evf_ethtool.c. The code was intially moved from i40e_ethtool.c into i40e_ethtool_stats.h as a way of better logically organizing the code. This has two problems. First, we can't have an inline function with variadic arguments on all platforms. Second, it gave the appearance that we had plans to share code between the i40e and i40evf drivers, due to having a near copy of the contents in the i40evf/i40e_ethtool_stats.h file. Patches which actually attempt to combine or share code between the i40e and i40evf drivers have not materialized, and are likely a ways off. Rather than fixing the one function which causes build issues, just move this code back into the i40e_ethtool.c and i40evf_ethtool.c files. Note that we also change these functions back from static inlines to just statics, since they're no longer in a header file. We can revisit this if/when work is done to actually attempt to share code between drivers. Alternatively, this stats code could be made more generic so that it can be shared across drivers as part of ethtool kernel work. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
In case B53_SRAB is enabled, but not B53_SERDES, we can get the following linking error: ERROR: "b53_serdes_init" [drivers/net/dsa/b53/b53_srab.ko] undefined! We also need to ifdef the body of b53_srab_serdes_map_lane() since it would not be used when B53_SERDES is disabled and that would produce a warning. Fixes: 0e01491d ("net: dsa: b53: Add SerDes support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Casey Leedom authored
When a non-zero VLAN Tag ID is passed to t4_set_vlan_acl() then impose mandatory VLAN Usage with that VLAN ID. I.e any other VLAN ID should result in packets getting dropped. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
kbuild test robot authored
Fixes: 48875222 ("liquidio: Add spoof checking on a VF MAC address") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
jun qian authored
As you are already in a tasklet, it is unnecessary to call spin_lock_bh. Signed-off-by: jun qian <hangdianqj@163.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Sep, 2018 4 commits
-
-
Florian Fainelli authored
There is no way for user-space to know what a given DSA network device's tagging protocol is. Expose this information through a dsa/tagging attribute which reflects the tagging protocol currently in use. This is helpful for configuration (e.g: none behaves dramatically different wrt. bridges) as well as for packet capture tools when there is not a proper Ethernet type available. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Stoppa authored
Both WARN_ON() and WARN_ONCE() already contain an unlikely(), so it's not necessary to wrap it into another. Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c: In function 'bnxt_tc_parse_flow': drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:186:6: warning: variable 'addr_type' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yi-Hung Wei authored
Currently, OVS only parses the IP protocol number for the first IPv6 fragment, but sets the IP protocol number for the later fragments to be NEXTHDF_FRAGMENT. This patch tries to derive the IP protocol number for the IPV6 later frags so that we can match that. Signed-off-by: Yi-Hung Wei <yihung.wei@gmail.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Sep, 2018 2 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_setup_octeon_vf_device': drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:619:20: warning: variable 'ring_flag' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Weilin Chang authored
1. Provide the API to set/unset the spoof checking feature. 2. Add a function to periodically provide the count of found packets with spoof VF MAC address. 3. Prevent VF MAC address changing while the spoofchk of the VF is on unless the changing MAC address is issued from PF. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-