* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
  Input: cy8ctmg110 - capacitive touchscreen support
  Input: keyboard - also match braille-only keyboards
  Input: adp5588-keys - export unused GPIO pins
  Input: xpad - add product ID for Hori Fighting Stick EX2
  Input: adxl34x - fix leak and use after free
  Input: samsung-keypad - Add samsung keypad driver
  Input: i8042 - reset keyboard controller wehen resuming from S2R
  Input: synaptics - set min/max for finger width
  Input: synaptics - only report width on hardware that supports it
  Input: evdev - signal that device is writable in evdev_poll()
  Input: mousedev - signal that device is writable in mousedev_poll()
  Input: change input handlers to use bool when possible
  Input: document the MT event slot protocol
  Input: introduce MT event slots
  Input: usbtouchscreen - implement reset_resume
  Input: usbtouchscreen - implement runtime power management
  Input: usbtouchscreen - implement basic suspend/resume
  Input: Add ATMEL QT602240 touchscreen driver
  Input: fix signedness warning in input_set_keycode()
  ...

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

Merge branch 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6

* 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Make swiotlb bookkeeping functions visible in the header file.
  swiotlb: search and replace "int dir" with "enum dma_data_direction dir"
  swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix.
  swiotlb: add the swiotlb initialization function with iotlb memory
  swiotlb: add swiotlb_tbl_map_single library function

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (90 commits)
  AppArmor: fix build warnings for non-const use of get_task_cred
  selinux: convert the policy type_attr_map to flex_array
  AppArmor: Enable configuring and building of the AppArmor security module
  TOMOYO: Use pathname specified by policy rather than execve()
  AppArmor: update path_truncate method to latest version
  AppArmor: core policy routines
  AppArmor: policy routines for loading and unpacking policy
  AppArmor: mediation of non file objects
  AppArmor: LSM interface, and security module initialization
  AppArmor: Enable configuring and building of the AppArmor security module
  AppArmor: update Maintainer and Documentation
  AppArmor: functions for domain transitions
  AppArmor: file enforcement routines
  AppArmor: userspace interfaces
  AppArmor: dfa match engine
  AppArmor: contexts used in attaching policy to system objects
  AppArmor: basic auditing infrastructure.
  AppArmor: misc. base functions and defines
  TOMOYO: Update version to 2.3.0
  TOMOYO: Fix quota check.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Fix recovery stuck bug (try #2)
  GFS2: Fix typo in stuffed file data copy handling
  Revert "GFS2: recovery stuck on transaction lock"
  GFS2: Make "try" lock not try quite so hard
  GFS2: remove dependency on __GFP_NOFAIL
  GFS2: Simplify gfs2_write_alloc_required
  GFS2: Wait for journal id on mount if not specified on mount command line
  GFS2: Use nobh_writepage

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: do not warn unnecessarily
  UBI: do not print message about corruptes PEBs if we have none of them
  UBI: improve delete-compatible volumes handling
  UBI: fix error message and compilation warnings
  UBI: generate random image_seq when formatting MTD devices
  UBI: improve ECC error message
  UBI: improve corrupted flash handling
  UBI: introduce eraseblock counter variables
  UBI: introduce a new IO return code
  UBI: simplify IO error codes

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix a memory leak on error path.
  UBIFS: fix GC LEB recovery
  UBIFS: use ERR_CAST
  UBIFS: check return code

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits)
  9p: fix sparse warnings in new xattr code
  fs/9p: remove sparse warning in vfs_inode
  fs/9p: destroy fid on failed remove
  fs/9p: Prevent parallel rename when doing fid_lookup
  fs/9p: Add support user. xattr
  net/9p: Implement TXATTRCREATE 9p call
  net/9p: Implement attrwalk 9p call
  9p: Implement LOPEN
  fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
  9p: Implement TMKDIR
  9p: Implement TMKNOD
  9p: Define and implement TSYMLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Implement client side of setattr for 9P2000.L protocol.
  9p: getattr client implementation for 9P2000.L protocol.
  fs/9p: Pass the correct user credentials during attach
  net/9p: Handle the server returned error properly
  9p: readdir implementation for 9p2000.L
  9p: Make use of iounit for read/write
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs simplify and speed up direct I/O completions
  xfs: move aio completion after unwritten extent conversion
  direct-io: move aio_complete into ->end_io
  xfs: fix big endian build
  xfs: clean up xfs_bmap_get_bp
  xfs: simplify xfs_truncate_file
  xfs: kill the b_strat callback in xfs_buf
  xfs: remove obsolete osyncisosync mount option
  xfs: clean up filestreams helpers
  xfs: fix gcc 4.6 set but not read and unused statement warnings
  xfs: Fix build when CONFIG_XFS_POSIX_ACL=n
  xfs: fix unsigned underflow in xfs_free_eofblocks
  xfs: use GFP_NOFS for page cache allocation
  xfs: fix memory reclaim recursion deadlock on locked inode buffer
  xfs: fix xfs_trans_add_item() lockdep warnings
  xfs: simplify and remove xfs_ireclaim
  xfs: don't block on buffer read errors
  xfs: move inode shrinker unregister even earlier
  xfs: remove a dmapi leftover
  xfs: writepage always has buffers
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits)
  cifs: fsc should not default to "on"
  [CIFS] remove redundant path walking in dfs_do_refmount
  cifs: ignore the "mand", "nomand" and "_netdev" mount options
  cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
  cifs: don't allow cifs_iget to match inodes of the wrong type
  [CIFS] relinquish fscache cookie before freeing CIFSTconInfo
  cifs: add separate cred_uid field to sesInfo
  fs: cifs: check kmalloc() result
  [CIFS] Missing ifdef
  [CIFS] Missing line from previous commit
  [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
  cifs: add mount option to enable local caching
  cifs: read pages from FS-Cache
  cifs: store pages into local cache
  cifs: FS-Cache page management
  cifs: define inode-level cache object and register them
  cifs: define superblock-level cache index objects and register them
  cifs: remove unused cifsUidInfo struct
  cifs: clean up cifs_find_smb_ses (try #2)
  cifs: match secType when searching for existing tcp session
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

avoid potential stack overflow by correctly checking count parameter
Reported-by: Ilja <ilja@netric.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure,
free allocated resources.
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

The kpad structure is assigned to i2c client via i2s_set_clientdata()
at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to
access it (via dev_get_drvdata! which is not nice at all) causing an
oops.

Let's pass pointer to kpad directly into adp5588_gpio_add() and
adp5588_gpio_remove() to avoid accessing driver data before it is
set up.

Also split out building of gpiomap into a separate function to
clear the logic.
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Rewrites the siano IR implementation. The previous implementation were
non-standard. As such, it has issues if more than one device registers IR,
as there used to have some static constants used during protocol decoding
phase. Also, it used to implement its on RAW decoder, and only for RC5.

The new code uses RC core subsystem for handling IR. This brings several
new features to the driver, including:
	- Allow to dynamically replace the IR keycodes;
	- Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY);
	- Supports lirc dev;
	- Doesn't have race conditions when more than one sms IR is
	  registered;
	- The code size for the IR implementation is very small;
	- it exports the IR features via /sys/class/rc.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

sms were using a non-compliant nomenclature for the USB devices. Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Use a more standard way to name those tables, as they're currently used
by the script that coverts those tables to be loaded via userspace.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Add the proper gpio port for WinTV MiniStick, with the information provided
by Michael.

Thanks-to: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Simplifies the logic for handling firmware 1.20 RC messages, fixing the
logic.

While here, I tried to use a RC-6 remote controller from my TV set, but it
didn't work with dib0700. Not sure why, but maybe this never worked.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch implements change_protocol callback. With this change,
there's no need for an extra modprobe parameter to specify the
protocol. When a table is loaded (either from in-kernel rc-map
tables or via ir-keytable program), the driver will automatically
change the protocol, in order to work with the given table.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Instead of having one big keytable with 2 protocols inside, break it
into two separate tables, being one for NEC and another for RC-5 variants,
and properly identify what variant should be used at the boards entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

a 250ms delay is too low for this device. It ends by producing false
repeat events. Increase the delay time to 500 ms to avoid troubles.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Use the new rc-core handler at dvb-usb-remote for dib0700 driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Allows dvb-usb drivers to use rc-core, instead of the legacy
implementation.

No driver were ported yet to rc-core, so, some small adjustments
may be needed, when starting to migrate the drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This is a big patch, yet trivial. It just move the RC properties
to a separate struct, in order to prepare the dvb-usb drivers to
use rc-core. There's no change on the behavior of the drivers.

With this change, it is possible to have both legacy and rc-core
based code inside the dvb-usb-remote, allowing a gradual migration
to rc-core, driver per driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

dvb-usb has its own IR handle code. Now that we have a Remote
Controller subsystem, we should start using it. So, remove this
struct, in favor of the similar struct defined at the RC subsystem.

This is a big, but trivial patch. It is a 3 line delect, plus
lots of rename on several dvb-usb files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

RJ54N1CB0C is a Sharp camera sensor.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

SH7724 datasheet specifies 480 pixels as the VOU maximum vertical resolution.
This is a bug in the datasheet, VOU also supports the full PAL resolution: 576
lines. Adjust the driver accordingly.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Using CEU with CSI2 on SH-Mobile requires some special configuration of the
former. We also have to switch from calling only one subdev .s_mbus_fmt and
.try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver
use count to prevent it from unloading, while in use.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to
several video clients and send data to the CEU or to the Image Signal
Processor.  This patch implements a v4l2-subdevice driver for CSI-2 to be used
within the soc-camera framework, implementing the second subdevice in addition
to the actual video clients.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

These formats belong to the standard format set, defined by the MIPI CSI-2
specification.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Endianness notation is meaningless for 8 bit YUYV codes. Switch pixel code
names to explicitly state the order of colour components in the data
stream.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Make the bits under staging/lirc/ buildable, and add a TODO note.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Commonly found on several Hauppauge video capture devices.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>