Pull ARM fixes from Russell King:
 "The usual random collection of relatively small ARM fixes"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8063/1: bL_switcher: fix individual online status reporting of removed CPUs
  ARM: 8064/1: fix v7-M signal return
  ARM: 8057/1: amba: Add Qualcomm vendor ID.
  ARM: 8052/1: unwind: Fix handling of "Pop r4-r[4+nnn],r14" opcode
  ARM: 8051/1: put_user: fix possible data corruption in put_user
  ARM: 8048/1: fix v7-M setup stack location

Pull arm64 fix from Will Deacon:
 "Fix CoW regression for transparent hugepages by routing set_pmd_at to
  set_pte_at, which correctly handles PTE_WRITE and will mark the
  resulting table entry as read-only where appropriate"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: fix pmd_write CoW brokenness

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are three stable-candidate fixes, one for the ACPI thermal
  driver and two for cpufreq drivers.

  Specifics:

   - A workqueue is destroyed too early during the ACPI thermal driver
     module unload which leads to a NULL pointer dereference in the
     driver's remove callback.  Fix from Aaron Lu.

   - A wrong argument is passed to devm_regulator_get_optional() in the
     probe routine of the cpu0 cpufreq driver which leads to resource
     leaks if the driver is unbound from the cpufreq platform device.
     Fix from Lucas Stach.

   - A lock is missing in cpufreq_governor_dbs() which leads to memory
     corruption and NULL pointer dereferences during system
     suspend/resume, for example.  Fix from Bibek Basu"

* tag 'pm+acpi-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / thermal: fix workqueue destroy order
  cpufreq: cpu0: drop wrong devm usage
  cpufreq: remove race while accessing cur_policy

Pull clock fixes from Mike Turquette:
 "Small number of user-visible regression fixes for clock drivers.

  There is a memory leak fix for an ST platform, an infinite Loop Of
  Doom fix for the recent changes to the basic clock divider (hopefully
  the last fix for those recent changes) and some Tegra PLL changes
  which keep PCI from being hosed on that platform"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
  clk: st: Fix memory leak
  clk: divider: Fix table round up function
  clk: tegra: Fix enabling of PLLE
  clk: tegra: Introduce divider mask and shift helpers
  clk: tegra: Fix PLLE programming

Commit 9c7e535f ("arm64: mm: Route pmd thp functions through pte
equivalents") changed the pmd manipulator and accessor functions to
convert the target pmd to a pte, process it with the pte functions, then
convert it back. Along the way, we gained support for PTE_WRITE, however
this is completely ignored by set_pmd_at, and so we fail to set the
PMD_SECT_RDONLY for PMDs, resulting in all sorts of lovely failures (like
CoW not working).

Partially reverting the offending commit (by making use of
PMD_SECT_RDONLY explicitly for pmd_{write,wrprotect,mkwrite} functions)
leads to further issues because pmd_write can then return potentially
incorrect values for page table entries marked as RDONLY, leading to
BUG_ON(pmd_write(entry)) tripping under some THP workloads.

This patch fixes the issue by routing set_pmd_at through set_pte_at,
which correctly takes the PTE_WRITE flag into account. Given that
THP mappings are always anonymous, the additional cache-flushing code
in __sync_icache_dcache won't impose any significant overhead as the
flush will be skipped.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Steve Capper <steve.capper@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>

Pull sound fixes from Takashi Iwai:
 "Just two small stable fixes: an HD-audio fix for the new Intel
  chipsets and a PM handling fix in PCM dmaengine core"

* tag 'sound-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix onboard audio on Intel H97/Z97 chipsets
  ALSA: pcm_dmaengine: Add check during device suspend

Pull vfs fix from Al Viro:
 "Oh, well...  Still nothing useful on that livelock (I had something
  that looked kinda-sorta like a non-invasive solution, but it
  deadlocks), so it's just Miklos' vmsplice fix for now"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: fix vmplice_to_user()

The content of /sys/devices/system/cpu/cpu*/online  is still 1 for those
CPUs that the switcher has removed even though the global state in
/sys/devices/system/cpu/online is updated correctly.

It turns out that commit 0902a904 ("Driver core: Use generic
offline/online for CPU offline/online") has changed the way those files
retrieve their content by relying on on the generic attribute handling
code.  The switcher, by calling cpu_down() directly, bypasses this
handling and the attribute value doesn't get updated.

Fix this by calling device_offline()/device_online() instead.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull kvm fixes from Paolo Bonzini:
 "Small fixes for x86, slightly larger fixes for PPC, and a forgotten
  s390 patch.  The PPC fixes are important because they fix breakage
  that is new in 3.15"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: announce irqfd capability
  KVM: x86: disable master clock if TSC is reset during suspend
  KVM: vmx: disable APIC virtualization in nested guests
  KVM guest: Make pv trampoline code executable
  KVM: PPC: Book3S: ifdef on CONFIG_KVM_BOOK3S_32_HANDLER for 32bit
  KVM: PPC: Book3S HV: Add missing code for transaction reclaim on guest exit
  KVM: PPC: Book3S: HV: make _PAGE_NUMA take effect

Pull two powerpc fixes from Ben Herrenschmidt:
 "Here's a pair of powerpc fixes for 3.15 which are also going to
  stable.

  One's a fix for building with newer binutils (the problem currently
  only affects the BookE kernels but the affected macro might come back
  into use on BookS platforms at any time).  Unfortunately, the binutils
  maintainer did a backward incompatible change to a construct that we
  use so we have to add Makefile check.

  The other one is a fix for CPUs getting stuck in kexec when running
  single threaded.  Since we routinely use kexec on power (including in
  our newer bootloaders), I deemed that important enough"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc, kexec: Fix "Processor X is stuck" issue during kexec from ST mode
  powerpc: Fix 64 bit builds with binutils 2.24

Commit 6130f531 "switch vmsplice_to_user() to copy_page_to_iter()" in
v3.15-rc1 broke vmsplice(2).

This patch fixes two bugs:

 - count is not initialized to a proper value, which resulted in no data
   being copied

 - if rw_copy_check_uvector() returns negative then the iov might be leaked.

Tested OK.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge tag 'clk-tegra-fixes-3.15' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-fixes

PLLE fixes for 3.15

If we try to perform a kexec when the machine is in ST (Single-Threaded) mode
(ppc64_cpu --smt=off), the kexec operation doesn't succeed properly, and we
get the following messages during boot:

[    0.089866] POWER8 performance monitor hardware support registered
[    0.089985] power8-pmu: PMAO restore workaround active.
[    5.095419] Processor 1 is stuck.
[   10.097933] Processor 2 is stuck.
[   15.100480] Processor 3 is stuck.
[   20.102982] Processor 4 is stuck.
[   25.105489] Processor 5 is stuck.
[   30.108005] Processor 6 is stuck.
[   35.110518] Processor 7 is stuck.
[   40.113369] Processor 9 is stuck.
[   45.115879] Processor 10 is stuck.
[   50.118389] Processor 11 is stuck.
[   55.120904] Processor 12 is stuck.
[   60.123425] Processor 13 is stuck.
[   65.125970] Processor 14 is stuck.
[   70.128495] Processor 15 is stuck.
[   75.131316] Processor 17 is stuck.

Note that only the sibling threads are stuck, while the primary threads (0, 8,
16 etc) boot just fine. Looking closer at the previous step of kexec, we observe
that kexec tries to wakeup (bring online) the sibling threads of all the cores,
before performing kexec:

[ 9464.131231] Starting new kernel
[ 9464.148507] kexec: Waking offline cpu 1.
[ 9464.148552] kexec: Waking offline cpu 2.
[ 9464.148600] kexec: Waking offline cpu 3.
[ 9464.148636] kexec: Waking offline cpu 4.
[ 9464.148671] kexec: Waking offline cpu 5.
[ 9464.148708] kexec: Waking offline cpu 6.
[ 9464.148743] kexec: Waking offline cpu 7.
[ 9464.148779] kexec: Waking offline cpu 9.
[ 9464.148815] kexec: Waking offline cpu 10.
[ 9464.148851] kexec: Waking offline cpu 11.
[ 9464.148887] kexec: Waking offline cpu 12.
[ 9464.148922] kexec: Waking offline cpu 13.
[ 9464.148958] kexec: Waking offline cpu 14.
[ 9464.148994] kexec: Waking offline cpu 15.
[ 9464.149030] kexec: Waking offline cpu 17.

Instrumenting this piece of code revealed that the cpu_up() operation actually
fails with -EBUSY. Thus, only the primary threads of all the cores are online
during kexec, and hence this is a sure-shot receipe for disaster, as explained
in commit e8e5c215 (powerpc/kexec: Fix orphaned offline CPUs across kexec),
as well as in the comment above wake_offline_cpus().

It turns out that cpu_up() was returning -EBUSY because the variable
'cpu_hotplug_disabled' was set to 1; and this disabling of CPU hotplug was done
by migrate_to_reboot_cpu() inside kernel_kexec().

Now, migrate_to_reboot_cpu() was originally written with the assumption that
any further code will not need to perform CPU hotplug, since we are anyway in
the reboot path. However, kexec is clearly not such a case, since we depend on
onlining CPUs, atleast on powerpc.

So re-enable cpu-hotplug after returning from migrate_to_reboot_cpu() in the
kexec path, to fix this regression in kexec on powerpc.

Also, wrap the cpu_up() in powerpc kexec code within a WARN_ON(), so that we
can catch such issues more easily in the future.

Fixes: c97102ba (kexec: migrate to reboot cpu)
Cc: stable@vger.kernel.org
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

With binutils 2.24, various 64 bit builds fail with relocation errors
such as

arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
	(.text+0x165ee): relocation truncated to fit: R_PPC64_ADDR16_HI
	against symbol `interrupt_base_book3e' defined in .text section
	in arch/powerpc/kernel/built-in.o
arch/powerpc/kernel/built-in.o: In function `exc_debug_crit_book3e':
	(.text+0x16602): relocation truncated to fit: R_PPC64_ADDR16_HI
	against symbol `interrupt_end_book3e' defined in .text section
	in arch/powerpc/kernel/built-in.o

The assembler maintainer says:

 I changed the ABI, something that had to be done but unfortunately
 happens to break the booke kernel code.  When building up a 64-bit
 value with lis, ori, shl, oris, ori or similar sequences, you now
 should use @high and @higha in place of @h and @ha.  @h and @ha
 (and their associated relocs R_PPC64_ADDR16_HI and R_PPC64_ADDR16_HA)
 now report overflow if the value is out of 32-bit signed range.
 ie. @h and @ha assume you're building a 32-bit value. This is needed
 to report out-of-range -mcmodel=medium toc pointer offsets in @toc@h
 and @toc@ha expressions, and for consistency I did the same for all
 other @h and @ha relocs.

Replacing @h with @high in one strategic location fixes the relocation
errors. This has to be done conditionally since the assembler either
supports @h or @high but not both.

Cc: <stable@vger.kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull virtio_blk fix from Jens Axboe:
 "There's a start/stop queue race in virtio_blk, which causes stalls and
  erratic behaviour for some.  I've had this queued up for 3.16 for a
  while, but I think we should push it into the current series as well.

  So I cherry picked the commit and added a stable marker as well, so it
  can propagate down"

* 'for-linus' of git://git.kernel.dk/linux-block:
  virtio_blk: fix race between start and stop queue

Pull two timer fixes from Thomas Gleixner:
 "Two small fixlets for ARM SoC clocksource drivers:

   - avoid calling functions which might sleep from interrupt [disabled]
     context in tcb_clksrc used on Atmel SoCs

   - use irq_force_affinity() to pin the per cpu timer interrupt on a
     not yet online cpu in the SiRFprimaII driver"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource: tcb_clksrc: Make tc_mode interrupt safe
  clocksource: marco: Fix the affinity set for local timer of CPU1

Pull ARM SoC fixes from Olof Johansson:
 "A slightly larger set of fixes than we'd like at this point in the
  release.  Hopefully our very last batch before 3.15:

  OMAP:
   - Fix boot regression with CPU_IDLE enabled
   - Fixes for audio playback on OMAP5
   - Clock rate setting fix for OMAP3
   - Misc idle/PM fixes
  Exynos:
   - Removal of a couple of power domains to work around issues with
     access when they are powered down
   - Enabling missing highspeed-i2c driver to make MMC regulators work
   - Secondary CPU spin-up fix for 4212
   - Remove MDMA1 engine to avoid conflicts on secure mode platforms
   - A few other DT fixes
  Marvell:
   - PCI-e fixes for clocks and resource allocation

  plus a few other smaller fixes, add a MAINTAINERS entry for reset
  drivers, etc"

* tag 'fixes-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  MAINTAINERS: Add reset controller framework entry
  ARM: trusted_foundations: fix compile error on non-SMP
  ARM: at91: sam9260: fix compilation issues
  ARM: mvebu: fix definitions of PCIe interfaces on Armada 38x
  ARM: imx: fix error handling in ipu device registration
  ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
  ARM: dts: Keep LDO4 always ON for exynos5250-arndale board
  ARM: dts: Fix SPI interrupt numbers for exynos5420
  ARM: dts: fix incorrect ak8975 compatible for exynos4412-trats2 board
  ARM: OMAP2+: Fix DMA hang after off-idle
  ARM: OMAP2+: nand: Fix NAND on OMAP2 and OMAP3 boards
  ARM: dts: Remove g2d_pd node for exynos5420
  ARM: dts: Remove mau_pd node for exynos5420
  ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount
  ARM: dts: disable MDMA1 node for exynos5420
  ARM: EXYNOS: fix the secondary CPU boot of exynos4212
  ARM: omap5: hwmod_data: Correct IDLEMODE for McPDM
  ARM: mvebu: mvebu-soc-id: keep clock enabled if PCIe unit is enabled
  ARM: mvebu: mvebu-soc-id: add missing clk_put() call
  ARM: at91/dt: sam9260: correct external trigger value
  ...

Pull pinctrl fix from Linus Walleij:
 "A single last pinctrl fix for the v3.15 series: the vt8500 driver was
  failing to update the output value when the combined set direction
  output and set value was executed"

* tag 'pinctrl-v3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: vt8500: Ensure value reg is updated when setting direction

Pull slave-dmaengine fixes from Vinod Koul:
 "We have three small fixes.

  First one from Andy reverts the devm_request irq as we need to ensure
  the tasklet is killed after irq is freed, so we need to do free irq in
  our code.  Other two from Arnd are fixing the compilation issue in
  omap and sa11x0 drivers with ARM randconfigs"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sa11x0: remove broken #ifdef
  dmaengine: omap: hide filter_fn for built-in drivers
  dmaengine: dw: went back to plain {request,free}_irq() calls

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

When there isn't enough vring descriptor for adding to vq,
blk-mq will be put as stopped state until some of pending
descriptors are completed & freed.

Unfortunately, the vq's interrupt may come just before
blk-mq's BLK_MQ_S_STOPPED flag is set, so the blk-mq will
still be kept as stopped even though lots of descriptors
are completed and freed in the interrupt handler. The worst
case is that all pending descriptors are freed in the
interrupt handler, and the queue is kept as stopped forever.

This patch fixes the problem by starting/stopping blk-mq
with holding vq_lock.

Cc: Jens Axboe <axboe@kernel.dk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

Conflicts:
	drivers/block/virtio_blk.c

* pm-cpufreq:
  cpufreq: cpu0: drop wrong devm usage
  cpufreq: remove race while accessing cur_policy

* acpi-thermal:
  ACPI / thermal: fix workqueue destroy order

When the thermal module is to be removed, we should destroy the wq
acpi_thermal_pm_queue after the ACPI driver's remove callback is
executed as we will need to flush the workqueue there, or a NULL pointer
access will be hit.
Reported-and-tested-by: Kui Zhang <kuizhang@gmail.com>
References: http://www.spinics.net/lists/kernel/msg1747251.html
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

According to the ARM ARM, the behaviour is UNPREDICTABLE if the PC read
from the exception return stack is not half word aligned.  See the
pseudo code for ExceptionReturn() and PopStack().

The signal handler's address has the bit 0 set, and setup_return()
directly writes this to regs->ARM_pc.  Current hardware happens to
discard this bit, but QEMU's emulation doesn't and this makes processes
crash.  Mask out bit 0 before the exception return in order to get
predictable behaviour.

Fixes: 19c4d593 ("ARM: ARMv7-M: Add support for exception handling")

Cc: stable@kernel.org
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This patch adds Qualcomm amba vendor Id to the list. This ID is used in mmci driver. The ID selected in same lines like 0x41 is "A" for ARM, 0x51 is "Q" for Qualcomm.

As there are no physical register on Qcom SOC for amba vendor id, this is a fake ID assigned based on "Q" prefix from Qualcomm.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The arm EABI states that unwind opcode 10100nnn means pop register r4-4[4+nnn],aditionally there is a similar unwind opcode: 10101nnn which means the same thing plus popping r14. Those two cases are handled by the unwind_exec_pop_r4_to_rN function which checks whether the 4th bit is set and does r14 popping.

However, up until now it has been checking whether the 8th bit was set (mask & 0x80) instead of the 4th (mask & 0x8), a simple to make typo but this meant that we were always popping r14 even if we had the former opcode.

This patch changes the mask so that the 2 unwind opcodes are being handled correctly.
Signed-off-by: Nikolay Borisov <Nikolay.Borisov@arm.com>
Reviewed-by: Anurag Aggarwal <anurag19aggarwal@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

According to arm procedure call standart r2 register is call-cloberred.
So after the result of x expression was put into r2 any following
function call in p may overwrite r2. To fix this, the result of p
expression must be saved to the temporary variable before the
assigment x expression to __r2.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

__v7m_setup_stack currently sits in the .proc.info.init section, and
thus creates a bogus proc info entry (which by the way matches any
unknown CPU IDs, due to the entry's mask being 0).  Move it out of
there.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Pull AFS fixes and cleanups from David Howells:
 "Here are some patches to the AFS filesystem:

  1) Fix problems in the clean-up parts of the cache manager service
     handler.

  2) Split afs_end_call() introduced in (1) and replace some identical
     code elsewhere with a call to the first half of the split function.

  3) Fix an error introduced in the workqueue PREPARE_WORK() elimination
     commits.

  4) Clean up argument passing to functions called from the workqueue as
     there's now an insulating layer between them and the workqueue.
     This is possible from (3)"

* 'afs' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  AFS: Pass an afs_call* to call->async_workfn() instead of a work_struct*
  AFS: Fix kafs module unloading
  AFS: Part of afs_end_call() is identical to code elsewhere, so split it
  AFS: Fix cache manager service handlers

Merge documentation fixes from Randy Dunlap.

* emailed patches from Randy Dunlap <rdunlap@infradead.org>:
  Documentation: update /proc/stat "intr" count summary
  Documentation: update java sample wrapper for java 7
  Documentation: update thunderbird email client settings
  Documentation: fix typos in drm docbook

The sum at the beginning of line "intr" includes also unnumbered
interrupts.  It implies that the sum at the beginning isn't the sum
of the remainder of the line, not even an estimation.

Fixed the documentation to mention that.

This behaviour was added to /proc/stat in commit a2eddfa9 ("x86:
make /proc/stat account for all interrupts")
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The sample wrapper currently fails on some Java 7 .class files.  This
updates the wrapper to properly handle those files.
Signed-off-by: Jonathan Callen <jcallen@gentoo.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Added setting to email-clients that is easier to read and is easier to
setup thunderbird.  Removed config settings and added GUI settings.
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix spelling typo in DocBook/drm.tmpl
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull hwmon subsystem fixes from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (ntc_thermistor) Fix OF device ID mapping
  hwmon: (ntc_thermistor) Fix dependencies
  hwmon: Document temp[1-*]_min_hyst sysfs attribute

Pull single scsi fix from James Bottomley:
 "This is a single fix for a bug exposed by a sysfs change in 3.13 which
  now causes libsas to trigger a warn on in device removal"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] scsi_transport_sas: move bsg destructor into sas_rphy_remove

Pull two nfsd bugfixes from Bruce Fields:
 "Just two bugfixes, one for a merge-window-introduced ACL regression,
  the other for a longer-standing v4 state bug"

* 'for-3.15' of git://linux-nfs.org/~bfields/linux:
  nfsd4: warn on finding lockowner without stateid's
  nfsd4: remove lockowner when removing lock stateid
  nfsd4: fix corruption on setting an ACL.

The mapping from OF device IDs to platform device IDs is wrong.
TYPE_NCPXXWB473 is 0, TYPE_NCPXXWL333 is 1, so
ntc_thermistor_id[TYPE_NCPXXWB473] is { "ncp15wb473", TYPE_NCPXXWB473 }
while
ntc_thermistor_id[TYPE_NCPXXWL333] is { "ncp18wb473", TYPE_NCPXXWB473 }.

So the name is wrong for all but the "ntc,ncp15wb473" entry, and the
type is wrong for the "ntc,ncp15wl333" entry.

So map the entries by index, it is neither elegant nor robust but at
least it is correct.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>

In commit 9e8269de, support was added for ntc_thermistor devices being
declared in the device tree and implemented on top of IIO. With that
change, a dependency was added to the ntc_thermistor driver:

	depends on (!OF && !IIO) || (OF && IIO)

This construct has the drawback that the driver can no longer be
selected when OF is set and IIO isn't, nor when IIO is set and OF is
not. This is a regression for the original users of the driver.

As the new code depends on IIO and is useless without OF, include it
only if both are enabled, and set the dependencies accordingly. This
is clearer, more simple and more correct.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 9e8269de hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Cc: Doug Anderson <dianders@chromium.org>