When running Active Memory Sharing, pages can get marked as
"loaned" with the hypervisor by the CMM driver. This state gets
cleared by the system firmware when rebooting the partition.
When using kexec to boot a new kernel, this state never gets
cleared and the hypervisor and CMM driver can get out of sync
with respect to the number of pages currently marked "loaned".
Fix this by adding a reboot notifier to the CMM driver to deflate
the balloon and mark all pages as active.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

When running Active Memory Sharing, the Collaborative Memory Manager
(CMM) may mark some pages as "loaned" with the hypervisor.
Periodically, the CMM will query the hypervisor for a loan request,
which is a single signed value.  When kexec'ing into a kdump kernel,
the CMM driver in the kdump kernel is not aware of the pages the
previous kernel had marked as "loaned", so the hypervisor and the CMM
driver are out of sync.  This results in the CMM driver getting a
negative loan request, which can then get treated as a large unsigned
value and can cause kdump to hang due to the CMM driver inflating too
large.  Since there really is no clean way for the CMM driver in the
kdump kernel to clean this up, simply disable CMM in the kdump kernel.
This fixes hangs we were seeing doing kdump with AMS.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Otherwise you get lot of errors like these:

drivers/block/viodasd.c:72: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_open':
drivers/block/viodasd.c:135: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_release':
drivers/block/viodasd.c:184: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c: In function 'viodasd_getgeo':
drivers/block/viodasd.c:209: error: dereferencing pointer to incomplete type
drivers/block/viodasd.c:214: error: implicit declaration of function 'get_capacity'
drivers/block/viodasd.c: At top level:
drivers/block/viodasd.c:222: error: variable 'viodasd_fops' has initializer but incomplete type
drivers/block/viodasd.c:223: error: unknown field 'owner' specified in initializer

Discovered by a randconfig build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The ctrl-o (^O) is a common control key used by several applications,
such as vim, but hvc_console uses ^O as the magic-sysrq key.  This
commit allows users to send ^O to applications by pressing ^O twice
in succession.

To implement this, this commit introduces a check if ^O is pressed
again if the sysrq_pressed variable is already set.  In this case,
clear sysrq_pressed state and flip the ^O character to the tty.  (The
old behavior has always set "sysrq_pressed" if ^O has been entered,
and it has not flipped the ^O character to the tty.)
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

ibm_configure_kernel_dump is passed as the token to rtas_call() is
never initialised.  This sets it to something sane.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Manish Ahuja <mahujam@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

print_dump_header() will be called at least once with a NULL pointer in
a normal boot sequence.  If DEBUG is defined then we will dereference
the pointer and crash.  Add a quick fix to exit early in the NULL pointer
case.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Manish Ahuja <mahujam@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Rename PowerPC's struct vm_region so that I can introduce my own
global version for NOMMU.  It's feasible that the PowerPC version may
wish to use my global one instead.

The NOMMU vm_region struct defines areas of the physical memory map
that are under mmap.  This may include chunks of RAM or regions of
memory mapped devices, such as flash.  It is also used to retain
copies of file content so that shareable private memory mappings of
files can be made.  As such, it may be compatible with what is
described in the banner comment for PowerPC's vm_region struct.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Using the common code means that more complete cache information will
provided in sysfs on platforms that don't use the l2-cache property
convention.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The smp code uses cache information to populate cpu_core_map; change
it to use common code for cache lookup.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

We have more than one piece of code that looks up cache nodes manually
using the "l2-cache" property.  Add a common helper routine which does
this and handles ePAPR's "next-level-cache" property as well as
powermac.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This function is used to count how many GPIOs are specified for
a device node.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Given this list (contains three gpio specifiers, one of which is a hole):

gpios = <&phandle1 1 2 3
         0 /* a hole */
         &phandle2 4 5 6>;

of_parse_phandles_with_args() would report -ENOENT for the `hole'
specifier item, the same error value is used to report the end of the
list, for example.

Sometimes we want to differentiate holes from real errors -- for
example when we want to count all the [syntax correct] specifiers.

With this patch of_parse_phandles_with_args() will report -EEXITS when
somebody requested to parse a hole.

Also, make the out_{node,args} arguments optional, when counting we
don't really need the out values.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

By using 'list++' in the beginning we can simplify the code a
little bit.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* 'i2c-fixes' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c-s3c2410: fix check for being in suspend.
  i2c-cpm: Detect and report NAK right away instead of timing out

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Add JBD2 compat feature bit.
  ocfs2: Always update xattr search when creating bucket.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole display
  USB: set correct configuration in probe of ti_usb_3410_5052
  USB: add 5372:2303 to pl2303
  USB: skip Set-Interface(0) if already in altsetting 0
  USB: fix comment about endianness of descriptors
  USB: Documentation/usb/gadget_serial.txt: update to match driver use_acm behaviour
  usbmon: drop bogus 0t from usbmon.txt
  USB: gadget: fix rndis working at high speed
  USB: ftdi_sio: Adding Ewert Energy System's CANdapter PID
  USB: tty: SprogII DCC controller identifiers
  usb-storage: update unusual_devs entry for Nokia 5310
  USB: Unusual devs patch for Nokia 3500c
  USB: storage: unusual_devs.h: Nokia 3109c addition
  USB: fix problem with usbtmc driver not loading properly

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  STAGING: Move staging drivers back to staging-specific menu
  driver core: add newlines to debugging enabled/disabled messages
  xilinx_hwicap: remove improper wording in license statement
  driver core: fix using 'ret' variable in unregister_dynamic_debug_module

While testing a kernel with memory poisoning enabled, I saw some warnings
about the redzone getting clobbered when chasing DFS referrals. The
buffer allocation for the unicode converted version of the searchName is
too small and needs to take null termination into account.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc:
  powerpc: Fix corruption error in rh_alloc_fixed()
  powerpc/fsl-booke: Fix the miss interrupt restore

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Both messages are missing the newline and thus dmesg output gets
scrambled.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

GPLv2 doesn't allow additional restrictions to be imposed on any
code, so this wording needs to be removed from these files.
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The 'ret' variable is assigned, but not used in the return statement. Fix this.
Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add id for the Hewlett-Packard LD220-HP POS pole display.

Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard
Signed-off-by: Mike Provencher <mike.provencher@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This driver transfers firmware. It may just as well set the correct
configuration.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds the "Superial" USB-Serial converter to pl2303 so that it
is detected, by the correct driver.  Adds the relevant vendor:product
(5372:2303) to the device tables in pl2303.c & pl2303.h.  The patch has
been tested against 2.6.24-22-generic.
Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

When a driver unbinds from an interface, usbcore always sends a
Set-Interface request to reinstall altsetting 0.  Unforunately, quite
a few devices have buggy firmware that crashes when it receives this
request.

To avoid such problems, this patch (as1180) arranges to send the
Set-Interface request only when the interface is not already in
altsetting 0.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch fixes a comment and clarifies the documentation about the
endianness of descriptors. The current policy is that descriptors will
be little-endian at the API even on big-endian systems; however the
/proc/bus/usb API predates this policy and presents descriptors with
some multibyte fields byte-swapped.
Signed-off-by: Phil Endecott <usb_endian_patch@chezphil.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Commit 7bb5ea54 (usb gadget serial: use composite gadget framework)
changed the default for the use_acm parameter from 0 to 1.
Update the documentation to match.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The example is incorrect: there is no 0t socket (the '1t' format has no
bus number in it). Also, correct the broken sentence for USB Tag.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix a bug specific to highspeed mode in the recently updated RNDIS
support:  it wasn't setting up the high speed notification endpoint,
which prevented high speed RNDIS links from working.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The following patch adds in the USB PID for Ewert Energy System's CANdapter
device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio
device driver.

The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu.

Relevant output from /proc/bus/usb/devices (With patch installed):

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0403 ProdID=9f80 Rev= 6.00
S:  Manufacturer=Ewert Energy Systems
S:  Product=CANdapter
S:  SerialNumber=A6RGB3Z3
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
Signed-off-by: Andrew Ewert <andrew@ewertenergy.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Someone on rmweb reminded me this had been overlooked from ages ago..

Add the identifiers for the Sprog II USB. This is a DCC control interface
using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been
using it with insmod options for ages, this just puts it into the driver
data.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1179) updates the unusual_devs entry for Nokia's 5310
phone to include a more recent firmware revision.

This fixes Bugzilla #12099.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Robson Roberto Souza Peixoto <robsonpeixoto@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0060 Rev= 5.51
S:  Manufacturer=Nokia
S:  Product=Nokia 3500c
S:  SerialNumber=357687010280751
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: Ozan Sener <themgzzy@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

2.6.26(.x, cannot remember) could handle the microSD card in my Nokia
3109c attached via USB as mass storage, 2.6.27(.x, up to and included
2.6.27.8) cannot. Please find the attached patch which fixes this
regression, and a copy of /proc/bus/usb/devices with my phone plugged in
running with this patch on Frugalware.

T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0063 Rev= 6.01
S:  Manufacturer=Nokia
S:  Product=Nokia 3109c
S:  SerialNumber=359561013742570
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

From: CSÉCSY László <boobaa@frugalware.org>
Cc: Phil Dibowitz <phil@ipom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The usbtmc driver forgot to export its device table to userspace.
Without this, it is never loaded properly when such a device is seen by
the system.

Cc: Marcel Janssen <marcel.janssen@admesy.nl>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There is an error in rh_alloc_fixed() of the Remote Heap code:
If there is at least one free block blk won't be NULL at the end of the
search loop, so -ENOMEM won't be returned and the else branch of
"if (bs == s || be == e)" will be taken, corrupting the management
structures.
Signed-off-by: Guillaume Knispel <gknispel@proformatique.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The commit e5e774d8
powerpc/fsl-booke: Fix problem with _tlbil_va being interrupted
introduce one issue. that casue the problem like this:

Kernel BUG at c00b19fc [verbose debug info unavailable]
Oops: Exception in kernel mode, sig: 5 [#1]
MPC8572 DS
Modules linked in:
NIP: c00b19fc LR: c00b1c34 CTR: c0064e88
REGS: ef02b7b0 TRAP: 0700   Not tainted  (2.6.28-rc8-00057-g1bda7128)
MSR: 00021000 <ME>  CR: 44048028  XER: 20000000
TASK = ef02c000[1] 'init' THREAD: ef02a000
GPR00: 00000001 ef02b860 ef02c000 eec201a0 c0dec2c0 00000000 000078a1 00000400
GPR08: c00b4e40 000078a1 c048ec00 a1780000 44048028 ecd26917 00000001 ef02b948
GPR16: ffffffea 0000020c 00000000 00000000 00000003 0000000a 00000000 000078a1
GPR24: eec201a0 00000000 ed849000 00000400 ef02b95c 00000001 ef02b978 ef02b984
NIP [c00b19fc] __find_get_block+0x24/0x238
LR [c00b1c34] __getblk+0x24/0x2a0
Call Trace:
[ef02b860] [c017b768] generic_make_request+0x290/0x328 (unreliable)
[ef02b8b0] [c00b1c34] __getblk+0x24/0x2a0
[ef02b910] [c00b4ae4] __bread+0x14/0xf8
[ef02b920] [c00fc228] ext2_get_branch+0xf0/0x138
[ef02b940] [c00fcc88] ext2_get_block+0xb8/0x828
[ef02ba00] [c00bbdc8] do_mpage_readpage+0x188/0x808
[ef02bac0] [c00bc5b4] mpage_readpages+0xec/0x144
[ef02bb50] [c00fba38] ext2_readpages+0x24/0x34
[ef02bb60] [c006ade0] __do_page_cache_readahead+0x150/0x230
[ef02bbb0] [c0064bdc] filemap_fault+0x31c/0x3e0
[ef02bbf0] [c00728b8] __do_fault+0x60/0x5b0
[ef02bc50] [c0011e0c] do_page_fault+0x2d8/0x4c4
[ef02bd10] [c000ed90] handle_page_fault+0xc/0x80
[ef02bdd0] [c00c7adc] set_brk+0x74/0x9c
[ef02bdf0] [c00c9274] load_elf_binary+0x70c/0x1180
[ef02be70] [c00945f0] search_binary_handler+0xa8/0x274
[ef02bea0] [c0095818] do_execve+0x19c/0x1d4
[ef02bed0] [c000766c] sys_execve+0x58/0x84
[ef02bef0] [c000e950] ret_from_syscall+0x0/0x3c
[ef02bfb0] [c009c6fc] sys_dup+0x24/0x6c
[ef02bfc0] [c0001e04] init_post+0xb0/0xf0
[ef02bfd0] [c046c1ac] kernel_init+0xcc/0xf4
[ef02bff0] [c000e6d0] kernel_thread+0x4c/0x68
Instruction dump:
4bffffa4 813f000c 4bffffac 9421ffb0 7c0802a6 7d800026 90010054 bf210034
91810030 7c0000a6 68008000 54008ffe <0f000000> 3d20c04e 3b29ffb8 38000008

The issue was the beqlr returns early but we haven't reenabled interrupts.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>