- 03 Aug, 2010 40 commits
-
-
Axel Lin authored
The following symbols are needlessly defined global: thz_dev cl_dev acerhdf_dev acerhdf_dev_ops acerhdf_cooling_ops This patch makes the symbols static. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Acked-by:
Borislav Petkov <bp@alien8.de> Acked-by:
Peter Feuerer <peter@piie.net> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Axel Lin authored
In the case of no match ( hotk->model == END_MODEL ), the only posible case to return 0 is to have a Samsung P30 detected. This patch improves readability by moving related code after if/else clause to be inside if clause. Signed-off-by:
-
Axel Lin authored
In the case of no match ( hotk->model == END_MODEL ), model sholud be kfreed before return AE_OK. This patch includes below fixes: 1. adds a missing kfree(model) before return AE_OK. 2. asus_hotk_get_info should return int, thus return 0 instead of AE_OK. Signed-off-by:
-
Axel Lin authored
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_check_cb to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by:
Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Cc: Matthew Garrett <mjg@redhat.com>a Signed-off-by:
-
Roald Frederickx authored
The driver now supports the Compal JHL90 (which I use) and it has some added features. The biggest novelties are a battery interface (power_supply) and a temperature and fan control interface (hmwon). It also adds a power-off feature to the backlight subsystem and it exports a few files that can enable/disable wake_on_XXX events. Much of the original code of the old features is still there, but I've changed some names to keep the naming more coherent with the added functionalities. (Sorry for the huge patch) Some technical stuff about the new driver: First of all, I'm not sure if the extra features also work on the other Compal boards. Currently they only get enabled if the DMI data indicates you are on a JHL90 board. Secondly, I've noticed a quirk in my fan controller. I have to re-send the wanted pwm-level to the controller every so often. If I don't do this, the fanspeed will slowly rise until after a couple of minutes it's at full speed. (Note that every normal userland application will probably update the pwm-level every so often anyway, based on temperature readings, so this might not be an issue in practice) If this turns out to be a problem with all the controllers, maybe we should implement a kernel timer and have the driver re-send the pwm level every XX seconds to make this transparent to userspace? (However, I couldn't immediately find a way to do this cleanly.) Additional information can be found in the source comments. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: add missing semicolon] Signed-off-by:
Roald Frederickx <roald.frederickx@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Randy Dunlap authored
compal-laptop uses hwmon interfaces, so it should depend on HWMON. compal-laptop.c:(.devinit.text+0x4071f): undefined reference to `hwmon_device_register' compal-laptop.c:(.devexit.text+0x6ec0): undefined reference to `hwmon_device_unregister' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Roald Frederickx <roald.frederickx@gmail.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
Axel Lin authored
input_free_device() should only be used if input_register_device() was not called yet or if it failed. This patch removes unnecessary input_free_device calls. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Cc: Matthew Garrett <mjg@redhat.com>a Signed-off-by:
-
Peter Feuerer authored
Signed-off-by:
-
Rahul Chaturvedi authored
Driver didn't verify the pointers in which it got product information back from DMI; on QEMU one of the pointers came back null, which made the driver crash and subsequently caused a kernel panic. Signed-off-by:
Rahul Chaturvedi <rkc@chromium.org> Signed-off-by:
-
Peter Feuerer authored
Remove "chk_off" as it was only needed for T31 netbooks. But those netbooks can also be handled just with "cmd_off" register (0x9e) for reading the state back. Signed-off-by:
-
Peter Feuerer authored
Add new BIOS versions for Acer 1410 and 1810xx and Packard Bell netbooks. Fixed registers of Acer AOA150 BIOS version v0.3114: Old registers caused Fan to spin up at every temperature check. Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
Thomas Renninger <trenn@suse.de> Cc: Matthew Garrett <mjg@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Matthew Garrett authored
Thomas Bächler reports that his machine generates two keycodes for zooming in and out. Add these to the default keymap. Signed-off-by: -
Axel Lin authored
platform_device_unregister calls platform_device_del and platform_device_put, thus this change is logically equivalent to original code. I made this change because the documents in platform.c shows that: platform_device_del and platform_device_put must _only_ be externally called in error cases. All other usage is a bug. Signed-off-by:
-
Axel Lin authored
If dell_new_hk_type is true, dell_legacy_wmi_keymap will point to a memory allocated in setup_new_hk_map(). In this case, the memory is not freed in current implementation. This patch fixes the leak by kfree(dell_wmi_keymap) if dell_new_hk_type is true. Signed-off-by:
-
Axel Lin authored
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_matched to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by:
-
Axel Lin authored
The interface file is not writable, thus set permissions to S_IRUGO. Signed-off-by:
-
Axel Lin authored
The callers of write_acpi_int_ret() pass ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. This patch adds a missing kfree(buffer.pointer) before return -ENOMEM if kstrdup fail. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Signed-off-by:
-
Axel Lin authored
When acpi_evaluate_object() is passed ACPI_ALLOCATE_BUFFER, the caller must kfree the returned buffer if AE_OK is returned. The callers of wmi_get_event_data() pass ACPI_ALLOCATE_BUFFER, and thus must check its return value before accessing or kfree() on the buffer. This patch adds return value checking for wmi_get_event_data() and adds a missing kfree(obj) in the end of wmi_notify_debug Signed-off-by:
-
Islam Amer authored
Fixes pressing the eject key on Dell Studio 1555 does not work and produces message : dell-wmi: Unknown key 0 pressed Signed-off-by:Islam Amer <pharon@gmail.com>
-
Alan Cox authored
We exit staging rar! rar! rar!... Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Axel Lin authored
platform_device_unregister will also call platform_device_put() to drop reference count. Signed-off-by:
-
Axel Lin authored
This patch properly kfree out.pointer and gblock in error path. Signed-off-by:
-
Rezwanul Kabir authored
This is to support Precision M4500 and others. Signed-off-by:
Rezwanul Kabir <Rezwanul_Kabir@dell.com> Signed-off-by:
-
Axel Lin authored
This patch fixes the resource reclaim in acer_wmi_init error path. Signed-off-by:
-
Jiri Slaby authored
Stanse found that there are two NULL checks missing in ips_monitor. So check their value too and bail out appropriately if the allocation failed. While at it, add one more kfree to the fail path. It is not necessary now, but may be needed in the future when a new allocation is added. And for completeness. Also remove unneeded initialization of the variables. They are all set right after their declaration. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Axel Lin authored
Current implementation in hp_wmi_init does not check any error and always return success. This patch properly handles recource reclaim and return err in error path. Signed-off-by:
-
Feng Tang authored
Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
rfkill_alloc returns NULL when it fails if RFKILL is enabled. When RFKILL is disabled, its return value of ERR_PTR(-ENODEV) is OK to use as all rfkill functions will work with it, as they are simply empty stubs. Reported-by:
Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: platform-driver-x86@vger.kernel.org Cc: mjg@redhat.com Cc: don@syst.com.br Cc: rpurdie@rpsys.net Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
-
Jesse Barnes authored
Be sure to enable GPU turbo by default at load time and check GPU busy and MCP exceeded status correctly. Also fix up CPU power comparison and work around buggy MCH temp reporting. Signed-off-by:
-
Jesse Barnes authored
Intel Core i3/5 platforms with integrated graphics support both CPU and GPU turbo mode. CPU turbo mode is opportunistic: the CPU will use any available power to increase core frequencies if thermal headroom is available. The GPU side is more manual however; the graphics driver must monitor GPU power and temperature and coordinate with a core thermal driver to take advantage of available thermal and power headroom in the package. The intelligent power sharing (IPS) driver is intended to coordinate this activity by monitoring MCP (multi-chip package) temperature and power, allowing the CPU and/or GPU to increase their power consumption, and thus performance, when possible. The goal is to maximize performance within a given platform's TDP (thermal design point). Signed-off-by:
-
Jesse Barnes authored
In some cases (for instance with kernel threads) it may be desireable to use on-stack deferrable timers to get their power saving benefits. Add interfaces to support this for the IPS driver. Signed-off-by:
-
Randy Dunlap authored
msi-laptop uses i8042_*() interfaces, so it should depend on SERIO_I8042. E.g., when SERIO_I8042=m and MSI_LAPTOP=y: msi-laptop.c:(.text+0x18a7fe): undefined reference to `i8042_install_filter' msi-laptop.c:(.init.text+0xd69d): undefined reference to `i8042_remove_filter' msi-laptop.c:(.exit.text+0x19c3): undefined reference to `i8042_remove_filter' Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Randy Dunlap has reported that building classmate-laptop fails when CONFIG_RFKILL=m and CONFIG_ACPI_CMPC=y. He suggested depending on RFKILL, but, then, it will not be possible to select classmate-laptop when RFKILL is off. There's no known problem with building and using classmate-laptop with RFKILL off. So depend on RFKILL or RFKILL=n. Signed-off-by:
-
Julia Lawall authored
Give different error messages if device_enum is NULL or if its type field has the wrong value. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Thomas Renninger authored
- Improve error handling, by explictly return zero for success, error otherwise - WMI query command can have arbitrary input sized params - WMI query command can have specific output sized params (0, 4, 128,..) byte I like to go on here, but this is a rather intrusive change that should be looked at first. I am sure the one or other thing can be done better or there might be typo/bug somewhere. This did not get any testing yet, only compile tested. Next steps could be: - Eventually introduce hp_wmi_perform_{read,write}_query macros - Introduce new wireless query interface (0x1B) - more Signed-off-by: -
Thomas Renninger authored
Depending on ACPI version (1.0 -> 32 bit) an integer could be 32 or 64 bit long. _WED internal concatenates two integers and the return value will be 8 byte (2* 32 bit) or 16 byte (2* 64 bit) long, depending on the ACPI version. Also the data send with the WMI event is defined to be splitted into: - Event ID -> 4 bytes - Event Data -> 4 bytes This gets messed up with new ACPI versions. But it's a HP BIOS bug that may get fixed in the future -> Support both, 16 and 8 byte _WED buffers. Also the wrong assumption that from the event data sent, only the first byte is relevant got cleaned up that it fits event_id/event_data as described above. Signed-off-by:
-
Thomas Renninger authored
Rather than print unknown events when we know what caused them Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
-
Thomas Renninger authored
Signed-off-by:
-
