The RPMSG_VIRTIO is now user selectable option so we explicitly
select it in multi_v7_defconfig. Till now RPMSG_VIRTIO was
selected by ST_REMOTEPROC=m in multi_v7_defconfig.
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v4.15/coccinelle-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "omap coccinelle warning fixes for v4.15 merge window" from Tony Lindgren:

Few coccinelle robot clean-up patches for careless human coding
issues for v4.15 merge window sent by their human operatorrrrrs.

* tag 'omap-for-v4.15/coccinelle-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
  ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
  ARM: omap1: add const and initconst to omap_lcd_config

Enable the GPIO controller driver used for UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable the GPIO controller driver used for UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc

Pull "Amlogic SoC updates for v4.15" from Kevin Hilman:

- add SMP support to Meson8/8b

* tag 'amlogic-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
  ARM: meson: Add SMP bringup code for Meson8 and Meson8b
  ARM: smp_scu: allow the platform code to read the SCU CPU status
  ARM: smp_scu: add a helper for powering on a specific CPU
  dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation

Merge tag 'imx-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX SoC changes for 4.15" from Shawn Guo:

 - A series from Marco Franchi from to clean up build warnings see with
   W=1 in arch/arm/mach-imx/.
 - Move i.MX6 speed grading check from i.MX platform code to cpufreq
   driver.  The patch is suggested by cpufreq folks to go through
   arm-soc tree.
 - Enable cpuidle support on i.MX6DL starting from IMX_CHIP_REVISION_1_1.
 - Constify platform_suspend_ops for MXS platform.

* tag 'imx-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  cpufreq: imx6q: Move speed grading check to cpufreq driver
  ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
  ARM: imx: mach-mx31lite: Make mx31lite_map_io static
  ARM: imx: cpuidle-imx5: Include "cpuidle.h" header file
  ARM: imx: 3ds-debugboard: Include "3ds_debugboard.h" header file
  ARM: imx: imx31moboard: Include "board-mx31moboard.h" header file
  ARM: mxs: constify platform_suspend_ops

Pull "Broadcom maintainers changes for 4.15" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs MAINTAINERS file update for
4.15, please pull the following:

- Florian updates the MAINTAINERS entry for Broadcom SoCs with the Hurricane 2 regexp
  to match new files being added

Pull "Broadcom soc changes for 4.15 (part 2)" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoC changes for 4.15 (second
part), please pull the following:

- Florian adds support for the Broadcom Hurricane 2 SoC machine entry point
  and defines the debug UART address for use with earlyprintk/DEBUG_LL

* tag 'arm-soc/for-4.15/soc-part2' of http://github.com/Broadcom/stblinux:
  ARM: debug: Add Hurricane 2 UART2 debug addresses
  ARM: bcm: Add support for Broadcom Hurricane 2 SoC

Pull "Broadcom defconfig changes for 4.15" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs multi_v7_defconfig file
updates for 4.15, please pull the following:

- Florian enables the Broadcom Hurricane 2 SoC in multi_v7_defconfig
  (CONFIG_ARCH_BCM_HR2)

* tag 'arm-soc/for-4.15/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2

Merge tag 'keystone_config_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/soc

Pull "ARM: Keystone config update for 4.15" from Santosh Shilimkar:

ARM: Enable PWM driver config

* tag 'keystone_config_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: configs: keystone: Enable TIECAP PWM driver

Merge tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/soc

Pull "Amlogic: defconfig updates for v4.15" from Kevin Hilman:
- enable SDIO/MMC controller

* tag 'amlogic-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: multi_v7_defconfig: enable the Meson MX SDIO/MMC controller

Merge tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX defconfig updates for 4.15" from Shawn Guo:
 - Turn on DRM_DW_HDMI_CEC option to get HDMI CEC support.
 - Enable MUX_MMIO to get ADV7180 probe on Gateworks GW51xx boards.

* tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Select the CEC driver
  ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO

Pull "mvebu arm64 for 4.15 (part 1)" from Gregory CLEMENT:

For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig

* tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu:
  arm64: defconfig: enable RTC on Armada 7K/8K SoCs
  arm64: defconfig: enable NAND on Armada 7K/8K SoCs
  arm64: defconfig: enable Marvell CP110 comphy
  arm64: defconfig: enable the Marvell 10G PHY as a module

Merge tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "arm64: tegra: Default configuration updates for v4.15-rc1" from Thierry Reding:

This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.

* tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable Tegra PCI controller

Merge tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Pull "Allwinner core changes for 4.15" from Maxime Ripard:

A bunch of patches for the sunxi documentation and mach-sunxi. The most
notable feature is the introduction of the R40 support.

* tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sunxi: add support for R40 SoC
  ARM: sunxi: fix the core number of V3s in sunxi README
  dt-bindings: add compatible string for Allwinner V3s SoC

select MESON_IRQ_GPIO in Kconfig for Amlogic's meson8b SoC
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

This adds the necessary SMP-operations and startup code to use the
additional cores on the Amlogic Meson8/Meson8m2 (both are using the same
sequence) and Meson8b (using a slightly difference sequence) SoCs.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
[add Meson8/Meson8m2 support and allow taking CPU cores offline as well]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

On Amlogic Meson8 / Meson8m2 (both Cortex-A9) and Meson8b (Cortex-A5)
the CPU hotplug code needs to wait until the SCU status of the CPU that
is being taken offline is SCU_PM_POWEROFF.
Provide a utility function (which can be invoked for example from
.cpu_kill()) which allows reading the SCU status of a CPU.

While here, replace the magic number 0x3 with a preprocessor macro
(SCU_CPU_STATUS_MASK) so we don't have to duplicate this magic number in
the new function.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

To boot the secondary CPUs on the Amlogic Meson8/Meson8m2 (Cortex-A9)
and Meson8b (Cortex-A5) SoCs we have to enable SCU mode SCU_PM_NORMAL,
otherwise the secondary cores will not start.
This patch adds a scu_cpu_power_enable() function which can be used to
enable SCU_PM_NORMAL for a specific (logical) CPU. An internal helper
function is also created, to avoid code duplication with
scu_power_mode().
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

With this patch we add documentation for:

* power-management-unit: the PMU is used to bring up the cores during
  SMP operations
* sram: among other things the sram is used to store the first code
  executed by the core when it is powered up
* cpu-enable-method: the CPU enable method used by Amlogic Meson8 and
  Meson8b SoCs
Signed-off-by: Carlo Caione <carlo@endlessm.com>
[also add Meson8 to the documentation]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The local variable "bus" will eventually be set to an appropriate pointer
a bit later. Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add a jump target so that a bit of exception handling can be better reused
at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "more soc changes for omaps for v4.15 merge window" from Tony Lindgren:

Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.

Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.

These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.

* tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
  ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
  ARM: OMAP2+: Drop omap_hwmod_dma_info
  ARM: OMAP2+: Drop omap_hwmod_irq_info
  ARM: OMAP4: Remove legacy IRQ for PRM
  ARM: OMAP3: Remove legacy IRQ for PRM
  bus: ti-sysc: Add minimal TI sysc interconnect target driver
  ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
  ARM: dts: Configure SmartReflex only to idle the interconnect target module
  ARM: dts: Add nodes for missing omap4 interconnect target modules
  dt-bindings: bus: Minimal TI sysc interconnect target module binding
  ARM: dts: Add missing hwmod related properties for dra7
  ARM: dts: Add missing hwmod related nodes for am33xx
  ARM: dts: Add missing dma hwmod property for omap5
  ARM: dts: Add missing wdt3 node for omap4
  ARM: dts: Add missing hsi node for omap4
  ARM: dts: Add missing onewire node for omap4
  ...

Merge tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 defconfig updates for v4.15, round 1" from Alexandre Torgue:

Highlights:
----------
 -Regenerate default configuration
 -Add DMAMUX support
 -Add I2C F7 support
 -Add MDMA support

* tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: configs: stm32: Add I2C F7 support in STM32 defconfig
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
  ARM: configs: stm32: Update default configuration for v4.14-rc1

The SX150X GPIO expander has been moved to pin control and
its Kconfig symbol has been renamed. We used to have a paper-over
thing in Kconfig but it was causing circular dependencies so
I have had to kill it off. Select the right driver instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM Based defconfig Updates for v4.15" from Andy Gross:

* Enable Sony Z2 tablet options
* Enable USB on APQ8064/MSM8974
* Fixup/catchup config to support newer options

* tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: qcom_defconfig: Enable Z2 Tablet related options
  ARM: qcom_defconfig: Disable DEBUG_GPIO
  ARM: qcom_defconfig: Enable configs for USB on apq8064/msm8974
  ARM: qcom_defconfig: Resync with new Kconfig options

Merge tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.15" from Andy Gross:

* Enable QCOM IOMMU
* Enable Qualcomm USB options

* tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: re-enable Qualcomm DB410c USB
  arm64: defconfig: Enable QCOM_IOMMU

Pull "arm: Xilinx Zynq patches for v4.15" from Michal Simek:

- Remove Soren from reviewer list

* tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx:
  MAINTAINERS: Remove myself as reviewer

Merge tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.15" from Krzysztof Kozłowski:

1. Cleanups for s3c24xx and s3c64xx (memory allocation printks, code
   style).
2. Remove of Exynos4212 related dead code (no more support for this
   SoC).

* tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Remove Exynos4212 related dead code
  ARM: SAMSUNG: Simplify size used for kzalloc
  ARM: SAMSUNG: Remove printk for failed memory allocation
  ARM: s3c64xx: Delete an unnecessary return statement in samsung_bl_set
  ARM: s3c64xx: Remove printk for failed memory allocation in samsung_bl_set
  ARM: s3c2410: Fix typos in a comments
  ARM: s3c24xx: Simplify size used for kzalloc in iotiming get
  ARM: s3c24xx: Remove printk for failed memory allocation in iotiming get

Merge tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski:

1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.

* tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board
  ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board
  ARM: multi_v7_defconfig: Enable USB3503 driver

Merge tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "OMAP soc changes for omaps for v4.15 merge window" from Tony Lindgren:

SoC changes for omaps for v4.15 merge window that are mostly non-urgent
fixes and clean-up in preparation for dropping more platform data later
on:

- Fix am33xx/am437x MMC address space offsets

- Fix overwriting clkctrl and modulemode values when dts data is
  used

- Drop unused platform init code for omap_init_hdq

- Drop unused struct omap_hwmod_mux_info

- Remove duplicate define for dra722 es1.0 silicon revision

- Add support for dra71x es2.1

- Make omap_dma_dev_info __initdata

- A series of fixes for Coccinelle found issues

* tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Fix typos in two comment lines in _omap_dm_timer_request()
  ARM: OMAP: Use kcalloc() in omap_system_dma_probe()
  ARM: OMAP: Improve a size determination in two functions
  ARM: OMAP: Delete an error message for a failed memory allocation in two functions
  ARM: OMAP2+: make omap_dma_dev_info __initdata
  ARM: DRA722: Add support for DRA71x Silicon Rev 2.1
  ARM: DRA722: remove redundant definition of 1.0 device
  ARM: OMAP2+: Drop unused omap_hwmod_mux_info
  ARM: OMAP2+: Drop unused omap_init_hdq
  ARM: OMAP2+: Fix overwriting of clkctrl and modulemode values
  ARM: OMAP2+: Fix MMC address space mismatch for am33xx and am43xx

Merge tag 'davinci-for-v4.15/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci defconfig updates for v4.15" from Sekhar Nori:

Enable CMA and MTD command line partitioning support.

* tag 'davinci-for-v4.15/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable CMA options
  ARM: davinci_all_defconfig: enable MTD_CMDLINE_PARTS

Pull "ARM64: hisilicon: defconfig updates for 4.15" from Wei Xu:

- Enable DRM_HISI_HIBMC for the D03/D05 board

* tag 'hisi-defconfig-for-4.15' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: Enable hisilicon hibmc drm driver

Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ThunderX needs its PCI host drivers to do anything useful, and
it's probably helpful to have networking by default too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-soc2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Second Round of Renesas ARM Based SoC Updates for v4.15" from Simon Horman:

Fix to allow UP build of shmobile.

Arnd Bergmann says:

  A bugfix for the SMP case broke the build for the UP case:

  arch/arm/mach-shmobile/headsmp-apmu.o: In function `shmobile_boot_apmu':
  (.text+0x34): undefined reference to `secondary_startup'

  The assembler file mixes code that is used for SMP with code
  that we also need on a single-CPU build, so I'm leaving it
  always enabled in the Makefile, but enclose the SMP code
  in an #ifdef.

* tag 'renesas-soc2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: fix non-SMP build

Merge tag 'vexpress-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc

Pull "ARMv7 Vexpress update/cleanup for v4.15" from Sudeep Holla:

Cosmetic cleanup dropping extra debug messages for memory allocation failures

* tag 'vexpress-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: vexpress/spc: Delete an error message for a failed memory allocation

Merge tag 'renesas-arm64-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.15" from Simon Horman:

* Enable the following to allow further test coverage
  - r8a77970 (V3M) and r8a77995 (D3) R-Car Gen3 SoCs
  - R-Car Gen3 thermal driver.
    This is used on a range of R-Car Gen3 SoCs

* tag 'renesas-arm64-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: defconfig: enable R8A77970 SoC
  arm64: defconfig: enable thermal driver for Renesas R-Car Gen3
  arm64: defconfig: Enable Renesas R8A77995 SoC

Merge tag 'integrator-pciv3-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "Delete old PCIv3 driver" from Linus Walleij:

This deletes the old PCIv3 driver in the Integrator machine.
It has been superceded by a modernized driver in the PCI
subsystem host/ directory.

* tag 'integrator-pciv3-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: Delete the V3 PCI driver

Pull "Broadcom soc changes for 4.15 (part 1)" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoC/Kconfig changes for 4.15
please pull the following:

- Danilo removes the clock provider driver stubs which are no longer needed
  now that we have a proper CPRMAN clock provider driver

- Stefan moves the SMP startup code for BCM2836 from the interrupt controller
  driver down to where it belongs in the architecture code, this was requested
  by Marc Zyngier before comitting any fixes to that code

- Phil provides a fix for a future Raspberry Pi firmware which will make the
  secondary cores wait for an event and therefore requires the CPU onlining
  other cores to send such event (along with the appropriate barrier)

- Florian fixes the BRCMSTB UART debug stub to work correctly when using an
  ARM BE8 kernel since there were some missing register read swapping needed

* tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping
  ARM: bcm2836: Send event when onlining other cores
  irqchip: bcm2836: Move SMP startup code to arch/arm (v2)
  clk: bcm2835: remove remains from stub clk driver