This member of the private data is a copy of the cmd->flags. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a local variable for the comedi_cmd and tidy up this function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This step in the (*do_cmdtest) fixes the comedi_cmd arguments, usually
for TRIG_TIMER sources.

Tidy up this step to clarify the code and remove the extra local
variables. All the arguments are unsigned long so change the 'tmp'
local variable type and rename it for aesthetics.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the comedi drivers use the i8253_cascade_ns_to_timer_2div_old()
or i8253_cascade_ns_to_timer_power() helpers to calculate the cascaded
divisors. Remove them to avoid any confusion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All of the comedi drivers use the i8253_cascade_ns_to_timer macro
when calculating the divisors for the cascaded timers. This macro
just causes the i8253_cascade_ns_to_timer_2div() inline to be used.

Rename i8253_cascade_ns_to_timer_2div() and remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input async command can use the pacer for the scan_begin_src
or the convert_src. The (*do_cmdtest) calculates the divisors when
validating the cmd argument.

There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.

For aesthetics, rename the setup_counters() function so it has namespace
associated with the driver. Refactor the function to use the values from
the private data and absorb das1800_set_frequency() to clarify the code.
Refactor the function to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.

This function will not fail so change the return type to void to simplify
the (*do_cmd) a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Refactor this code to reduce the indent level and the > 80 char
lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input async command can use the pacer for the convert_src. The
(*do_cmdtest) calculates the divisors when validating the cmd argument.

There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.

Refactor das16m1_set_pacer() to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.

Tidy up das16m1_cmd_exec() a bit. The pacer only needs to be set when the
convert_src is TRIG_TIMER.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog output async command can use the pacer for the scan_begin_src.
The (*do_cmdtest) calculates the divisors when validating the cmd argument.

There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.

For aesthetics, factor out the code that loads the counters to match the
analog input. Refactor the code to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input async command can use the pacer for the scan_bagin_src
or the convert_src. The (*do_cmdtest) validates that only one of these
sources has the TRIG_TIMER selected and calculates the divisors when
validating the cmd argument.

There is no reason to recalc the divisors in the (*do_cmd). Just use
the values from the private data.

Also, refactor cb_pcidas_load_counters() to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows us to
use the I8254_* defines when setting the mode to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not ued by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is always set to I8254_OSC_BASE_10MHZ. Remove
it from the private data and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define enables code that checks for analog input channel dropout
when reading samples. The define is enabled so we might as well always
enable the code and remove the define.

Factor out the common channel dropout detect code as a helper function
and cleanup the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename the helper functions that are called by
the interrupt function to handle reading the analog input samples.

Also, change the parameters to the helpers to the comedi_device
and comedi_subdevice pointers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function so it has namespace associated
with the driver.

Change the parameters to the function. The 'mode' is really a flag to
load the counters and the divisors can be found in the private data.

To clarify the code and remove the magic numbers, use the 8253.h
helpers to set the timer mode and load the counters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The local variable 'mode' is not necessary. We can determine the mode
by checking the cmd->convert_src and cmd->start_src. Do this instead
to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When the cmd->convert_src == TRIG_TIMER the divisors needed to
generate the pacer time are calculated in the (*do_cmdtest) to
validate the cmd->convert_arg. The core always does the (*do_cmdtest)
before the (*do_cmd) so there is no reason to recalc the divisors.

Save the calculated divisors in the private data as 'next_divisor[12]'.
The (*do_cmd) then transfers them to the private data 'divisor[12]' so
that they can be used to set the timer for the command immediately or
later when the cmd->start_src is TRIG_EXT (mode 2 in this driver).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is is not necessary. We can just check the
cmd->flags for TRIG_WAKE_EOS when needed. Remvoe the member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is set to 0 but never used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data is not necessary. We can determine if
the analog input command is neverending by checking the cmd->stop_src:

  TRIG_COUNT -> !neverending_ai
  TRIG_NONE -> neverending_ai

Do that instead and remove the unnecessary member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The chanlist is checked in Step 5 of the (*do_cmdtest) there is no
reason to check it again in the (*do_cmd). The only reason its done
again is to get the actual 'seglen', the non-repeating length of the
chanlist.

Save the 'seglen' found by pci171x_ai_check_chanlist() in the private
data and use that in the (*do_cmd). Rename the private data member to
clarify it. Also, remove the unused 'act_chanlist_pos' member from the
private data.

Refactor the error handling in pci171x_ai_check_chanlist() so it returns
and errno for failure and 0 for success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up this function to clarify what the chanlist is being checked for.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to fix coding style
warnings found by checkpatch.pl tool
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The i_IorangeBase1, i_PCIEeprom, and pc_EepromChip data in the boardinfo
was only needed to work out the usage of the PCI bars.  Now that that is
squared away, this info is no longer needed and can be removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver only uses PCI bar 0 (devpriv->i_IobaseAmcc), and PCI bar 1
(dev->iobase), don't bother reading the unused PCI bars.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board always has 32 digital inputs. Remove the test when
initializing the subdevice.

Also, since this board is the only one supported by this driver,
remove the boardinfo about the digital inputs and just use the
data directly in the subdevice init.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This include is no longer needed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reading the eeprom on this board is not necessary.  All information
required is in the boardinfo.

Remove the eeprom support code which is not really useful here.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some board pointer are assigned twice via comedi_board() in the comedi low
level driver attach functions. Remove the duplicate assignment from the
variable definition where the pointer is not used anyway until assigned later
in the function when dev->board_ptr, that comedi_board() relies on, is setup
correctly.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a bug fix that has been lurking in the Google tree but not pushed
upstream.

From: Octavian Purdila <octavian.purdila@intel.com>

The memory region is already reserved in goldfish_init() during
platform init.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The base code imported from the Google tree is ifdef heaven. Prepare to fix
this by adding a helper function.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable the 64-bit nand data support in the goldfish nand driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable the 64-bit goldfish audio driver.
Support 64-bit buffer address and data read/write.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes "Missing a blank line after declarations" warnings.
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The white space was all wrong here.  The case statements were indented
too far.  The if else blocks weren't indented at all.  There was a break
statement aligned with the else block and it confused my static checker
because "were curly braces intended" so that the break statement was
only on the else side?  Also I removed some commented out code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There were a couple lines which were not indented far enough and it was
confusing.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>