- 04 Jun, 2018 7 commits
-
-
Stephen Boyd authored
* clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock
-
Stephen Boyd authored
Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' and 'clk-qcom-mmagic' into clk-next * clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
-
Stephen Boyd authored
Merge branches 'clk-hisi-usb', 'clk-silent-bulk', 'clk-mtk-hdmi', 'clk-mtk-mali' and 'clk-imx6ul-ccosr' into clk-next * clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR
-
Stephen Boyd authored
Merge branches 'clk-stm32mp1', 'clk-samsung', 'clk-uniphier-mpeg', 'clk-stratix10' and 'clk-aspeed' into clk-next * clk-stm32mp1: clk: stm32mp1: Fix a memory leak in 'clk_stm32_register_gate_ops()' clk: stm32mp1: Add CLK_IGNORE_UNUSED to ck_sys_dbg clock clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static * clk-samsung: clk: samsung: simplify getting .drvdata * clk-uniphier-mpeg: clk: uniphier: add LD11/LD20 stream demux system clock * clk-stratix10: clk: socfpga: stratix10: suppress unbinding platform's clock driver clk: socfpga: stratix10: use platform driver APIs * clk-aspeed: clk:aspeed: Fix reset bits for PCI/VGA and PECI clk: aspeed: Support second reset register
-
Stephen Boyd authored
Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and 'clk-qcom-rcg-fix' into clk-next * clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency
-
Stephen Boyd authored
* clk-actions: clk: actions: Add S900 SoC clock support clk: actions: Add pll clock support clk: actions: Add composite clock support clk: actions: Add fixed factor clock support clk: actions: Add factor clock support clk: actions: Add divider clock support clk: actions: Add mux clock support clk: actions: Add gate clock support clk: actions: Add common clock driver support dt-bindings: clock: Add Actions S900 clock bindings
-
Stephen Boyd authored
* clk-warn: clk: Print the clock name and warning cause * clk-core: clk: Remove clk_init_cb typedef * clk-spear: clk: spear: fix WDT clock definition on SPEAr600 * clk-qcom-msm8998: clk: qcom: Add MSM8998 Global Clock Control (GCC) driver
-
- 01 Jun, 2018 13 commits
-
-
Lei YU authored
Add a 24MHz fixed clock. This clock will be used for certain devices, e.g. pwm. Signed-off-by: Lei YU <mine260309@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
ENET "ipg" clock should be IMX7D_ENETx_IPG_ROOT_CLK rather than IMX7D_ENET_AXI_ROOT_CLK which is for ENET bus clock. Based on Andy Duan's patch from the NXP kernel tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
Correct enet clock gates as below: CCGR6: IMX7D_ENET_AXI_ROOT_CLK (enet1 and enet2 bus clocks) CCGR112: IMX7D_ENET1_TIME_ROOT_CLK, IMX7D_ENET1_IPG_ROOT_CLK CCGR113: IMX7D_ENET2_TIME_ROOT_CLK, IMX7D_ENET2_IPG_ROOT_CLK Just rename unused IMX7D_ENETx_REF_ROOT_CLK for IMX7D_ENETx_IPG_ROOT_CLK instead of adding new clocks. Based on Andy Duan's patch from the NXP kernel tree. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
IMX7D_ENET_PHY_REF_ROOT_DIV supplies clock for PHY directly, there is no clock gate after it, rename it to IMX7D_ENET_PHY_REF_ROOT_CLK to avoid device tree change. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
IMX6SL_CLK_OCRAM_PODF is a busy divider, its name in CCM_CDHIPR register of Reference Manual CCM chapter is axi_podf_busy, correct its clock type. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Anson Huang authored
Disable those unnecessary clocks during kernel boot up to save power, those modules clock should be managed by modules driver in runtime. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajendra Nayak authored
There's no bus infrastructure today to handle all the mmagic bus clocks and GDSCs needed by all the multimedia blocks in msm8996, like mdss, video, camera and gpu. Mark all these clocks with a CLK_IS_CRITICAL and GDSCs with a ALWAYS_ON flag for now so they are left always enabled. This patch should be reverted at some point when we do have a bus driver to manage these clocks and GDSCs. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajendra Nayak authored
We have atleast some instances of ALWAYS_ON gdscs, which need to be turned ON *before* some clocks within the gdsc domain marked with a CLK_IS_CRITICAL can be turned ON. To facilitate this sequence, register the GDCSs (and hence handle the ALWAYS_ON gdscs) before we register clocks (and handle the clocks marked as CLK_IS_CRITICAL) Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Rajendra Nayak authored
Some GDSCs might have software control to turn them off, but we might want to keep them enabled always, in some cases because of lack of support in kernel to handle a graceful turning off/on of such GDSCs. Most common instances would be the GDCSs which power up the noc/bus fabrics, which need bus drivers to handle them and atleast support for which is missing on all qcom SoCs. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Jisheng Zhang authored
Use the appropriate SPDX license identifier and drop the previous license text. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Stephen Boyd authored
Merge tag 'tegra-for-4.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-tegra Pull Tegra clk driver updates from Thierry Reding: - proper implementation of the CDEV1/2 clocks on Tegra20 * tag 'tegra-for-4.18-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers
-
Stephen Boyd authored
Merge tag 'v4.18-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip Pull rockchip clk driver updates from Heiko Stuebner: Conversion to match_string helper of open-coded string comparison and removal of the initial devicetree-based gate-clocks, which were deprecated since 2014. * tag 'v4.18-rockchip-clk-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper
-
Stephen Boyd authored
Merge tag 'sunxi-clk-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-allwinner Pull Allwinner clock changes from Maxime Ripard: Not a lot of changes for this release, but two quite important features were added: the H6 PRCM clock support, and the needed changes to the R40 clock driver to allow for the EMAC to operate. * tag 'sunxi-clk-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU
-
- 23 May, 2018 1 commit
-
-
Heiko Stuebner authored
Initially we tried modeling clocks via the devicetree before switching to clocks declared in the clock drivers and only exporting specific ids to the devicetree. As the old code was in the kernel for 1-2 releases when the new mode of operation was added we kept it for backwards compatibility. That deprecation notice is in the binding since july 2014, so nearly 4 years now and I think it's time to drop the old cruft. Especially as at the time using the mainline kernel on Rockchip devices was not really possible, except for experiments on the really old socs of the rk3066 + rk3188 line, so there shouldn't be any devicetrees still around that rely on that code. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org>
-
- 22 May, 2018 1 commit
-
-
Yisheng Xie authored
match_string() returns the index of an array for a matching string, which can be used intead of open coded variant. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-clk@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-
- 18 May, 2018 3 commits
-
-
Dmitry Osipenko authored
CDEV1 and CDEV2 clocks are a bit special case, their parent clock is created by the pinctrl driver. It should be possible for clk user to request these clocks before pinctrl driver got probed and hence user will get an orphaned clock. That might be undesirable because user may expect parent clock to be enabled by the child, so let's return -EPROBE_DEFER till parent clock appears. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
Parents of CDEV1/2 clocks are determined by muxing of the corresponding pins. Pinctrl driver now provides the CDEV1/2 clock muxes and hence CDEV1/2 clocks could have correct parents. Set CDEV1/2 parents to the corresponding muxes to fix the parents. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
Dmitry Osipenko authored
CDEV1/CDEV2 clocks could have corresponding oscillator clock divider as a parent. Add these dividers in order to be able to provide that parent option. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marcel Ziswiler <marcel@ziswiler.com> Tested-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
-
- 17 May, 2018 2 commits
-
-
Icenowy Zheng authored
There's a GMAC configuration register, which exists on A64/A83T/H3/H5 in the syscon part, in the CCU of R40 SoC. Export a regmap of the CCU. Read access is not restricted to all registers, but only the GMAC register is allowed to be written. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
Icenowy Zheng authored
As we need to register a regmap on the R40 CCU, there needs to be a device structure bound to the CCU device node. Rewrite the R40 CCU driver initial code to make it a proper platform driver, thus we will have a platform device bound to it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
- 15 May, 2018 13 commits
-
-
Michael Trimarchi authored
osc->cko2_sel->cko2_podf->clk_cko2->clk_cko Example of usage to provide clock to the sgtl5000 codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6UL_CLK_OSC>; #sound-dai-cells = <0>; clocks = <&clks IMX6UL_CLK_CKO>; assigned-clocks = <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>, <&clks IMX6UL_CLK_CKO>; assigned-clock-parents = <&clks IMX6UL_CLK_OSC>, <&clks IMX6UL_CLK_CKO2_SEL>, <&clks IMX6UL_CLK_CKO2_PODF>, <&clks IMX6UL_CLK_CKO2>; clock-names = "mclk"; wlf,shared-lrclk; Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Tested-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Sean Wang authored
Add clock driver support for g3dsys on MT2701 and MT7623, which is providing essential clock gate and reset controller to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Sean Wang authored
Just add binding for a required reset referenced by Mali-450 on MT7623 or MT2701 SoC. Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Sean Wang authored
Just add binding for a required clock referenced by Mali-450 on MT7623 or MT2701 SoC. Cc: devicetree@vger.kernel.org Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Sean Wang authored
Add bindings to g3dsys providing necessary clock and reset control to Mali-450. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Ryder Lee authored
The hdmitx_dig_cts clock signal is not a child of clk26m, and the actual output of the PLL block is derived from the tvdpll via a configurable PLL post-divider. It is used as the PLL reference input to the HDMI PHY module. Fixes: e9862118 ("clk: mediatek: Add MT2701 clock support") Signed-off-by: Chunhui Dai <chunhui.dai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Jerome Brunet authored
In clk_bulk_get(), if we fail to get the clock due to probe deferal, we shouldn't print an error message. Just be silent in this case. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Jianguo Sun authored
There are two USB3 host controllers on Hi3798CV200 SoC. This commit adds missing clocks for them. Signed-off-by: Jianguo Sun <sunjianguo1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Jae Hyun Yoo authored
This commit fixes incorrect setting of reset bits for PCI/VGA and PECI modules. 1. Reset bit for PCI/VGA is 8. 2. PECI reset bit is missing so added bit 10 as its reset bit. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Fixes: 15ed8ce5 ("clk: aspeed: Register gated clocks") Cc: stable <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Joel Stanley authored
The ast2500 has an additional reset register that contains resets not present in the ast2400. This enables support for this register, and adds the one reset line that is controlled by it. Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Dinh Nguyen authored
The Stratix10 clock driver is essential to system operation, so their removal should never happen. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Dinh Nguyen authored
Use platform driver APIs to map memory so that it will automatically free the memory in case of errors. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> [sboyd@kernel.org: Return -ENOMEM error pointers, check for error pointer at call site] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
Katsuhiro Suzuki authored
Add clock for MPEG2 transport stream I/O and demux system (HSC) on UniPhier LD11/LD20 SoCs. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-