mysqltest.test 63.9 KB
Newer Older
1 2
-- source include/have_log_bin.inc

unknown's avatar
unknown committed
3
# This test should work in embedded server after mysqltest is fixed
4
-- source include/not_embedded.inc
5

6 7 8
# This test uses chmod, can't be run with root permissions
-- source include/not_as_root.inc

9 10 11
# Save the initial number of concurrent sessions
--source include/count_sessions.inc

12 13 14 15
# ============================================================================
#
# Test of mysqltest itself
#
16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
# There are three rules that determines what belong to each command
# 1. A normal command is delimited by the <delimiter> which by default is
#    set to ';'
#
#   ex: | select *
#       |   from t1;
#       |
#   Command: "select * from t1"
#
# 2. Special case is a line that starts with "--", this is a comment
#    ended when the new line character is reached. But the first word
#    in the comment may contain a valid command, which then will be
#    executed. This can be useful when sending commands that
#    contains <delimiter>
#
# 3. Special case is also a line that starts with '#' which is treated
#     as a comment and will be ended by new line character
#
34 35
# ============================================================================

36 37
# ----------------------------------------------------------------------------
# $mysql_errno contains the return code of the last command
unknown's avatar
unknown committed
38
# sent to the server.
39 40 41 42 43 44
# ----------------------------------------------------------------------------
# get $mysql_errno before the first statement
#     $mysql_errno should be -1
eval select $mysql_errno as "before_use_test" ;


45 46 47 48 49 50 51 52 53 54 55
# ----------------------------------------------------------------------------
# Positive case(statement)
# ----------------------------------------------------------------------------

select otto from (select 1 as otto) as t1;
# expectation = response
--error 0
select otto from (select 1 as otto) as t1;

# ----------------------------------------------------------------------------
# Negative case(statement):
56
# The derived table t1 does not contain a column named 'friedrich' .
57 58 59 60 61 62
# --> ERROR 42S22: Unknown column 'friedrich' in 'field list and
# --> 1054: Unknown column 'friedrich' in 'field list'
# ----------------------------------------------------------------------------

# expectation <> response
#--error 0
63 64 65
#select friedrich from (select 1 as otto) as t1
--error 1
--exec echo "select friedrich from (select 1 as otto) as t1;" | $MYSQL_TEST  2>&1
66 67

# expectation = response
68 69
--error ER_BAD_FIELD_ERROR

70 71 72 73 74
select friedrich from (select 1 as otto) as t1;

# The following unmasked unsuccessful statement must give
# 1. mysqltest gives a 'failed'
# 2. does not produce a r/<test case>.reject file !!!
unknown's avatar
unknown committed
75
# PLEASE uncomment it and check its effect
76 77 78 79 80 81 82 83
#select friedrich from (select 1 as otto) as t1;


# ----------------------------------------------------------------------------
# Tests for the new feature - SQLSTATE error code matching
# Positive case(statement)
# ----------------------------------------------------------------------------

84
# This syntax not allowed anymore, use --error S00000, see below
85
# expectation = response
86
#!S00000 select otto from (select 1 as otto) as t1;
87 88 89 90 91 92 93 94

--error S00000
select otto from (select 1 as otto) as t1;

# expectation <> response
#!S42S22 select otto from (select 1 as otto) as t1;
#--error S42S22
#select otto from (select 1 as otto) as t1;
95 96 97
--error 1
--exec echo "error S42S22; select otto from (select 1 as otto) as t1;" | $MYSQL_TEST  2>&1

98 99
# expecting a SQL-state for a command that can't give one should fail
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
100 101
--error 1
--exec echo "error S00000; remove_file $MYSQLTEST_VARDIR/tmp/test_nonexistent.tmp;" | $MYSQL_TEST  2>&1
102 103 104 105 106 107


# ----------------------------------------------------------------------------
# Negative case(statement)
# ----------------------------------------------------------------------------

108
# This syntax not allowed anymore, use --error S42S22, see below
109
# expectation = response
110
#!S42S22 select friedrich from (select 1 as otto) as t1;
111 112 113 114 115 116 117
--error S42S22
select friedrich from (select 1 as otto) as t1;

# expectation !=response
#!S00000 select friedrich from (select 1 as otto) as t1;
#--error S00000
#select friedrich from (select 1 as otto) as t1;
118 119
--error 1
--exec echo "error S00000; select friedrich from (select 1 as otto) as t1;" | $MYSQL_TEST  2>&1
120 121 122 123 124

# ----------------------------------------------------------------------------
# test cases for $mysql_errno
#
# $mysql_errno is a builtin variable of mysqltest and contains the return code
unknown's avatar
unknown committed
125
# of the last command sent to the server.
126
#
127
#      The following test cases often initialize $mysql_errno to 1064 by
128
#      a command with wrong syntax.
129
#      Example: --error 1064      To prevent the abort after the error.
130 131 132 133
#               garbage ;
# ----------------------------------------------------------------------------

# ----------------------------------------------------------------------------
134
# check mysql_errno = 0 after successful statement
135 136 137 138 139
# ----------------------------------------------------------------------------
select otto from (select 1 as otto) as t1;
eval select $mysql_errno as "after_successful_stmt_errno" ;

#----------------------------------------------------------------------------
140
# check mysql_errno = 1064 after statement with wrong syntax
141
# ----------------------------------------------------------------------------
142 143
--error ER_PARSE_ERROR

144 145 146 147
garbage ;
eval select $mysql_errno as "after_wrong_syntax_errno" ;

# ----------------------------------------------------------------------------
148
# check if let $my_var= 'abc' ; affects $mysql_errno
149
# ----------------------------------------------------------------------------
150 151
--error ER_PARSE_ERROR

152 153 154 155 156
garbage ;
let $my_var= 'abc' ;
eval select $mysql_errno as "after_let_var_equal_value" ;

# ----------------------------------------------------------------------------
157
# check if set @my_var= 'abc' ; affects $mysql_errno
158
# ----------------------------------------------------------------------------
159 160
--error ER_PARSE_ERROR

161 162 163 164 165
garbage ;
set @my_var= 'abc' ;
eval select $mysql_errno as "after_set_var_equal_value" ;

# ----------------------------------------------------------------------------
166 167
#  check if the setting of --disable-warnings itself affects $mysql_errno
#  (May be --<whatever> modifies $mysql_errno.)
168
# ----------------------------------------------------------------------------
169 170
--error ER_PARSE_ERROR

171 172 173 174 175
garbage ;
--disable_warnings
eval select $mysql_errno as "after_disable_warnings_command" ;

# ----------------------------------------------------------------------------
176 177 178
# check if --disable-warnings + command with warning affects the errno
# stored within $mysql_errno
# (May be disabled warnings affect $mysql_errno.)
179 180
# ----------------------------------------------------------------------------
drop table if exists t1 ;
181 182
--error ER_PARSE_ERROR

183 184 185 186 187 188
garbage ;
drop table if exists t1 ;
eval select $mysql_errno as "after_disable_warnings" ;
--enable_warnings

# ----------------------------------------------------------------------------
189
# check if masked errors affect $mysql_errno
190
# ----------------------------------------------------------------------------
191 192
--error ER_PARSE_ERROR

193
garbage ;
194 195
--error ER_NO_SUCH_TABLE

196 197
select 3 from t1 ;
eval select $mysql_errno as "after_minus_masked" ;
198 199
--error ER_PARSE_ERROR

200
garbage ;
201 202
--error ER_NO_SUCH_TABLE

203 204 205 206
select 3 from t1 ;
eval select $mysql_errno as "after_!_masked" ;

# ----------------------------------------------------------------------------
207
# Will manipulations of $mysql_errno be possible and visible ?
208
# ----------------------------------------------------------------------------
209 210
--error ER_PARSE_ERROR

211 212 213 214 215
garbage ;
let $mysql_errno= -1;
eval select $mysql_errno as "after_let_errno_equal_value" ;

# ----------------------------------------------------------------------------
216
# How affect actions on prepared statements $mysql_errno ?
217 218
# ----------------------------------------------------------------------------
# failing prepare
219 220
--error ER_PARSE_ERROR

221
garbage ;
222 223
--error ER_NO_SUCH_TABLE

224 225 226 227 228
prepare stmt from "select 3 from t1" ;
eval select $mysql_errno as "after_failing_prepare" ;
create table t1 ( f1 char(10));

# successful prepare
229 230
--error ER_PARSE_ERROR

231 232 233 234 235
garbage ;
prepare stmt from "select 3 from t1" ;
eval select $mysql_errno as "after_successful_prepare" ;

# successful execute
236 237
--error ER_PARSE_ERROR

238 239 240 241
garbage ;
execute stmt;
eval select $mysql_errno as "after_successful_execute" ;

unknown's avatar
unknown committed
242
# failing execute (table has been dropped)
243
drop table t1;
244 245
--error ER_PARSE_ERROR

246
garbage ;
247 248
--error ER_NO_SUCH_TABLE

249 250 251 252
execute stmt;
eval select $mysql_errno as "after_failing_execute" ;

# failing execute (unknown statement)
253 254
--error ER_PARSE_ERROR

255
garbage ;
256 257
--error ER_UNKNOWN_STMT_HANDLER

258 259 260 261
execute __stmt_;
eval select $mysql_errno as "after_failing_execute" ;

# successful deallocate
262 263
--error ER_PARSE_ERROR

264 265 266 267 268
garbage ;
deallocate prepare stmt;
eval select $mysql_errno as "after_successful_deallocate" ;

# failing deallocate ( statement handle does not exist )
269 270
--error ER_PARSE_ERROR

271
garbage ;
272 273
--error ER_UNKNOWN_STMT_HANDLER

274 275 276 277 278 279 280
deallocate prepare __stmt_;
eval select $mysql_errno as "after_failing_deallocate" ;


# ----------------------------------------------------------------------------
# test cases for "--disable_abort_on_error"
#
unknown's avatar
unknown committed
281 282
# "--disable_abort_on_error" switches off the abort of mysqltest
# after "unmasked" failing statements.
283 284 285 286
#
# The default is "--enable_abort_on_error".
#
# "Maskings" are
287
#   --error <error number>  and  --error <error number>
288 289
# in the line before the failing statement.
#
unknown's avatar
unknown committed
290
# There are some additional test cases for $mysql_errno
291 292 293 294 295
# because "--disable_abort_on_error" enables a new situation.
# Example: "unmasked" statement fails + analysis of $mysql_errno
# ----------------------------------------------------------------------------

# ----------------------------------------------------------------------------
unknown's avatar
unknown committed
296
# Switch off the abort on error and check the effect on $mysql_errno
297
# ----------------------------------------------------------------------------
298 299
--error ER_PARSE_ERROR

300 301 302 303 304
garbage ;
--disable_abort_on_error
eval select $mysql_errno as "after_--disable_abort_on_error" ;

# ----------------------------------------------------------------------------
305
# "unmasked" failing statement should not cause an abort
306 307 308 309
# ----------------------------------------------------------------------------
select 3 from t1 ;

# ----------------------------------------------------------------------------
310
# masked failing statements
311 312
# ----------------------------------------------------------------------------
# expected error = response
313 314
--error ER_NO_SUCH_TABLE

315
select 3 from t1 ;
316 317
--error ER_NO_SUCH_TABLE

318 319 320 321 322
select 3 from t1 ;
eval select $mysql_errno as "after_!errno_masked_error" ;
# expected error <> response
# --error 1000
# select 3 from t1 ;
323
# --error 1000
324
# select 3 from t1 ;
325 326
--error 1
--exec echo "disable_abort_on_error; error 1000; select 3 from t1; error 1000; select 3 from t1;" | $MYSQL_TEST  2>&1
327 328

# ----------------------------------------------------------------------------
329
# Switch the abort on error on and check the effect on $mysql_errno
330
# ----------------------------------------------------------------------------
331 332
--error ER_PARSE_ERROR

333 334 335 336 337
garbage ;
--enable_abort_on_error
eval select $mysql_errno as "after_--enable_abort_on_error" ;

# ----------------------------------------------------------------------------
338
# masked failing statements
339 340
# ----------------------------------------------------------------------------
# expected error = response
341 342
--error ER_NO_SUCH_TABLE

343 344 345
select 3 from t1 ;

# ----------------------------------------------------------------------------
346
# check that the old default behaviour is not changed
347 348 349 350 351 352
# Please remove the '#' to get the abort on error
# ----------------------------------------------------------------------------
#--error 1064
#select 3 from t1 ;
#
#select 3 from t1 ;
353

354 355 356 357 358 359 360 361 362 363 364
--error 1
--exec echo "disable_abort_on_error; enable_abort_on_error; error 1064; select 3 from t1; select 3 from t1;" | $MYSQL_TEST  2>&1


# ----------------------------------------------------------------------------
# Test comments
# ----------------------------------------------------------------------------

# This is a comment
# This is a ;  comment
# This is a -- comment
unknown's avatar
unknown committed
365 366 367
# -- This is also a comment
# -- # This is also a comment
# -- This is also a ; comment
368 369 370 371 372 373 374 375 376 377 378 379 380

# ----------------------------------------------------------------------------
# Test comments with embedded command
# ----------------------------------------------------------------------------

--echo hello
--     echo hello
--    echo ;;;;;;;;

--echo # MySQL: -- The

# ----------------------------------------------------------------------------
# Test detect end of line "junk"
unknown's avatar
unknown committed
381
# Most likely caused by a missing delimiter
382 383 384 385 386 387 388 389 390 391 392 393 394 395
# ----------------------------------------------------------------------------

# Too many parameters to function
--error 1
--exec echo "sleep 5 6;" | $MYSQL_TEST 2>&1

# Too many parameters to function
--error 1
--exec echo "--sleep 5 6" | $MYSQL_TEST 2>&1

#
# Missing delimiter
# The comment will be "sucked into" the sleep command since
# delimiter is missing until after "show status"
396 397 398 399 400
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
sleep 4
# A comment
show status;
EOF
401
--error 1
unknown's avatar
unknown committed
402
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
403
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
unknown's avatar
unknown committed
404 405 406 407

#
# Missing delimiter until eof
# The comment will be "sucked into" the sleep command since
408 409 410 411 412 413 414
# delimiter is missing
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
sleep 7
# Another comment
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
415
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
416 417 418 419 420 421 422 423 424 425 426 427 428 429

#
# Missing delimiter until "disable_query_log"
#
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
disconnect default

#
# comment
# comment 3
disable_query_log;
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
430
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
431 432 433 434 435 436 437 438 439 440 441 442 443 444 445

#
# Missing delimiter until "disable_query_log"
#
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
disconnect default

#
# comment

# comment 3
disable_query_log;
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
446
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462

#
# Missing delimiter until eof
#
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
disconnect default

#
# comment
# comment2

# comment 3
--disable_query_log
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
463
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
464 465 466 467 468 469 470 471 472 473 474

#
# Missing delimiter until eof
#
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
disconnect default # comment
# comment part2

# comment 3
--disable_query_log
EOF
unknown's avatar
unknown committed
475 476
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
477

478 479
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;

480 481 482 483 484
#
# Extra delimiter
#
--error 1
--exec echo "--sleep 4;" | $MYSQL_TEST 2>&1
unknown's avatar
unknown committed
485 486
--error 1
--exec echo "--disable_query_log;" | $MYSQL_TEST 2>&1
487 488 489 490


# Allow trailing # comment
--sleep 1 # Wait for insert delayed to be executed.
491
--sleep 1        # Wait for insert delayed to be executed.
492

unknown's avatar
unknown committed
493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553
# ----------------------------------------------------------------------------
# Test error
# ----------------------------------------------------------------------------

# Missing argument
--error 1
--exec echo "error;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--error" | $MYSQL_TEST 2>&1

# First char must be uppercase 'S' or 'E' or [0-9]
--error 1
--exec echo "--error s99999" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--error e99999" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--error 9eeeee" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--error 1sssss" | $MYSQL_TEST 2>&1

# First char 'S' but too long
--error 1
--exec echo "--error S999999" | $MYSQL_TEST 2>&1

# First char 'S' but lowercase char found
--error 1
--exec echo "--error S99a99" | $MYSQL_TEST 2>&1

# First char 'S' but too short
--error 1
--exec echo "--error S9999" | $MYSQL_TEST 2>&1

# First char 'E' but not found in error array
--error 1
--exec echo "--error E9999" | $MYSQL_TEST 2>&1

# First char [0-9] but contains chars
--error 1
--exec echo "--error 999e9" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--error 9b" | $MYSQL_TEST 2>&1

# Multiple errorcodes separated by ','
--error 1,1,1,1
#--error 9,ER_PARSE_ERROR
#--error ER_PARSE_ERROR
#--error 9,ER_PARSE_ERROR,9,ER_PARSE_ERROR
#--error 9, ER_PARSE_ERROR,  9,   ER_PARSE_ERROR
#--error 9,S00000,9,ER_PARSE_ERROR
#--error 9,S00000,9,ER_PARSE_ERROR,ER_PARSE_ERROR,ER_PARSE_ERROR,9,10,11,12
--error 9,S00000,9
--error 9,S00000,9,9,10,11,12
--error 9 ,10
--error 9 , 10
--error    9   ,   10
--error    9   ,   10

# Too many errorcodes specified
--error 1
--exec echo "--error 1,2,3,4,5,6,7,8,9,10,11" | $MYSQL_TEST 2>&1

554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576

# ----------------------------------------------------------------------------
# Test echo command
# ----------------------------------------------------------------------------

echo MySQL;
echo "MySQL";
echo MySQL: The world''s most popular open source database;
echo "MySQL: The world's most popular open source database";

echo MySQL: The world''s
     most popular open
     source database;

echo # MySQL: The world''s
# most popular open
# source database;

echo - MySQL: The world''s
- most popular open
- source database;

echo - MySQL: The world''s
unknown's avatar
unknown committed
577 578
-- most popular
-- open source database;
579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595

echo # MySQL: The
--world''s
# most popular
-- open
- source database;

echo "MySQL: The world's most popular; open source database";
echo "MySQL: The world's most popular ; open source database";
echo "MySQL: The world's most popular ;open source database";
echo echo message echo message;


echo ;

# Illegal use of echo

596 597
#--error 1
#--exec echo "echo \$;" | $MYSQL_TEST 2>&1
598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631


# ----------------------------------------------------------------------------
# Test exec command
# ----------------------------------------------------------------------------

# Illegal use of exec
--error 1
--exec echo "--exec " | $MYSQL_TEST 2>&1

# ----------------------------------------------------------------------------
# Test let command
# ----------------------------------------------------------------------------

let $message=MySQL;
echo $message;

let $message="MySQL";
echo $message;

let $message= MySQL: The
 world''s most
 popular open
 source database;
echo $message;

let $message= # MySQL: The
# world''s most
# popular open
# source database;
echo $message;

let $message=  -- MySQL: The
-- world''s most
unknown's avatar
unknown committed
632 633
-- popular
-- open source database;
634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653
echo $message;

let $message=  # MySQL: The
- world''s most
-- popular open
# source database;
echo $message;

echo '$message';
echo "$message";

let $1=hej;
echo $1;

let   $1   =hej ;
echo $1;

let $1 = hej;
echo $1;

654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669
let $1=1;
let $2=$1;
echo $2;
let $5=$6;
echo $5;
echo $6;

let $where=a long variable content;
echo $where;

let $where2= $where;
echo $where2;

let $where3=a long $where variable content;
echo $where3;

unknown's avatar
unknown committed
670 671 672
let $where3=a long \\\$where variable content;
echo $where3;

673 674 675
let $novar1= $novar2;
echo $novar1;

unknown's avatar
unknown committed
676 677 678 679 680 681 682 683 684
let $cat=na;
let $cat=ba$cat$cat;
echo banana = $cat;

# ba\$cat\$cat should have been sufficient.
# ba\\\$cat\\\$cat -> ba\$cat\$cat -> ba$cat$cat -> banana
# Magnus' upcoming patch will fix the missing second interpretation.
let $cat=ba\\\$cat\\\$cat;
echo Not a banana: $cat;
685

686 687 688 689 690 691 692

# Test illegal uses of let

--error 1
--exec echo "let ;" | $MYSQL_TEST 2>&1

--error 1
unknown's avatar
unknown committed
693
--exec echo "let \$=hi;" | $MYSQL_TEST  2>&1
694 695

--error 1
unknown's avatar
unknown committed
696
--exec echo "let \$1 hi;" | $MYSQL_TEST  2>&1
697 698

--error 1
unknown's avatar
unknown committed
699
--exec echo "let \$m hi;" | $MYSQL_TEST  2>&1
700 701

--error 1
unknown's avatar
unknown committed
702
--exec echo "let \$hi;" | $MYSQL_TEST  2>&1
703 704

--error 1
unknown's avatar
unknown committed
705
--exec echo "let \$ hi;" | $MYSQL_TEST  2>&1
706 707 708 709 710 711 712

--error 1
--exec echo "let =hi;" | $MYSQL_TEST  2>&1

--error 1
--exec echo "let hi;" | $MYSQL_TEST  2>&1

713
# More advanced test for Bug#17280
unknown's avatar
unknown committed
714 715 716 717 718 719 720 721 722 723 724 725
let $success= 1;
--echo # Execute: --echo # <whatever> success: \$success
--echo # <whatever> success: $success
--echo # Execute: echo # <whatever> success: \$success ;
echo # <whatever> success: $success ;

--echo # The next two variants work fine and expand the content of \$success
--echo # Execute: --echo \$success
--echo $success
--echo # Execute: echo \$success ;
echo $success ;

726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755

# ----------------------------------------------------------------------------
# Test to assign let from variable
# let $<var_name>=$<var_name>;
# ----------------------------------------------------------------------------

--echo # Check if let \$B = \$A is an assignment per value.

# Basic preparations:
--echo let \$A = initial value of A;
let $A = initial value of A;
# --echo # Content of \$A is: $A
--echo let \$B = initial value of B;
let $B = initial value of B;
# --echo # Content of \$B is: $B

# Assign $B to $A:
--echo let \$B = \$A
let $A = $B;
--echo # Content of \$A is: $A

# Changes of $B must NOT affect $A and Changes of $A must NOT affect $B !
--echo let \$A = changed value of A;
let $A = changed value of A;
--echo # Content of \$B is: $B

--echo let \$B = changed value of B;
let $B = changed value of B;
--echo # Content of \$A is: $A

unknown's avatar
unknown committed
756
# ----------------------------------------------------------------------------
757 758 759 760 761 762 763 764 765 766 767 768 769 770
# Test let from query with $variable
# let $<var_name>=`<query with $variable>`;
# ----------------------------------------------------------------------------

let $var1=content of variable 1;
let $var2= `select "$var1"`;
let $var3= `select concat("$var1", " ", "$var2")`;
echo var2: $var2;
echo var3: $var3;
if (`select length("$var3") > 0`)
{
  echo length of var3 is longer than 0;
}

unknown's avatar
unknown committed
771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790
# ----------------------------------------------------------------------------
# Test to assign let from query
# let $<var_name>=`<query>`;
# ----------------------------------------------------------------------------
echo var1;
let $var1= `select "hi" as "Col", 1 as "Column1", "hi there" as Col3`;
echo $var1;

echo var2;
let $var2= `select 2 as "Column num 2"`;
echo $var2;

echo var2 again;
let $var2= `select 2 as "Column num 2"`;
echo $var2;

echo var3 two columns with same name;
let $var3= `select 1 as "Col", 2 as "Col", 3 as "var3"`;
echo $var3;

unknown's avatar
unknown committed
791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808
echo var4 from query that returns NULL;
let $var4= `select NULL`;

echo var5 from query that returns no row;
let $var5= `SHOW VARIABLES LIKE "nonexisting_variable"`;

echo failing query in let;
--write_file $MYSQLTEST_VARDIR/tmp/let.sql
let $var2= `failing query`;
echo $var2;
EOF

--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/let.sql 2>&1

remove_file $MYSQLTEST_VARDIR/tmp/let.sql;


809 810 811 812 813 814 815 816 817
# ----------------------------------------------------------------------------
# Test source command
# ----------------------------------------------------------------------------

# Test illegal uses of source

--error 1
--exec echo "source ;" | $MYSQL_TEST 2>&1

unknown's avatar
unknown committed
818 819 820
# Fix win paths
--replace_result \\ /
# Source a nonexisting file
821 822 823 824
--error 1
--exec echo "source non_existingFile;" | $MYSQL_TEST 2>&1

# Too many source
unknown's avatar
unknown committed
825 826
--exec echo "source $MYSQLTEST_VARDIR/tmp/recursive.sql;" > $MYSQLTEST_VARDIR/tmp/recursive.sql
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
827
--error 1
unknown's avatar
unknown committed
828
--exec echo "source $MYSQLTEST_VARDIR/tmp/recursive.sql;" | $MYSQL_TEST 2>&1
829
remove_file $MYSQLTEST_VARDIR/tmp/recursive.sql;
830 831

# Source a file with error
unknown's avatar
unknown committed
832 833
--exec echo "garbage ;" > $MYSQLTEST_VARDIR/tmp/error.sql
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
834
--error 1
unknown's avatar
unknown committed
835
--exec echo "source $MYSQLTEST_VARDIR/tmp/error.sql;" | $MYSQL_TEST 2>&1
836

837
remove_file $MYSQLTEST_VARDIR/tmp/error.sql;
838

839
# Test execution of source in a while loop
unknown's avatar
unknown committed
840 841 842
--write_file $MYSQLTEST_VARDIR/tmp/sourced.inc
echo here is the sourced script;
EOF
843 844 845 846 847 848
--disable_query_log
let $outer= 2; # Number of outer loops
while ($outer)
{
  eval SELECT '$outer = outer loop variable after while' AS "";

unknown's avatar
unknown committed
849
  --source $MYSQLTEST_VARDIR/tmp/sourced.inc
850 851 852 853 854 855

  eval SELECT '$outer = outer loop variable before dec' AS "";
  dec $outer;
  eval SELECT '$outer = outer loop variable after dec' AS "";
}

856
# Test source in an if in a while which is false on 1st iteration
857
# Also test --error in same context
858
let $outer= 2; # Number of outer loops
859
let $ifval= 0; # false 1st time
860 861
while ($outer)
{
862
  echo outer=$outer ifval=$ifval;
863

864 865
  if ($ifval) {
    --source $MYSQLTEST_VARDIR/tmp/sourced.inc
866 867
    --error ER_NO_SUCH_TABLE
    SELECT * from nowhere;
868
  }
869
  dec $outer;
870
  inc $ifval;
871 872 873 874 875 876 877 878 879 880 881
}


# Test execution of source in a while loop
--disable_abort_on_error
# Sourcing of a file within while loop, sourced file will
# source other file
let $num= 9;
while ($num)
{
   SELECT 'In loop' AS "";
unknown's avatar
unknown committed
882
   --source $MYSQLTEST_VARDIR/tmp/sourced.inc
883 884
   dec $num;
}
885
--enable_abort_on_error
886
--enable_query_log
887 888 889 890

# Test source $variable/<filename>
--source $MYSQLTEST_VARDIR/tmp/sourced.inc

unknown's avatar
unknown committed
891
--remove_file $MYSQLTEST_VARDIR/tmp/sourced.inc
892

unknown's avatar
unknown committed
893 894 895 896 897 898 899 900 901 902 903 904 905
--write_file $MYSQLTEST_VARDIR/tmp/sourced.inc
echo "hello";
EOF

let $x= sourced;
source $MYSQLTEST_VARDIR/tmp/$x.inc;

let $x= $MYSQLTEST_VARDIR;
source $x/tmp/sourced.inc;

--remove_file $MYSQLTEST_VARDIR/tmp/sourced.inc


906 907 908 909 910 911 912 913 914 915 916
# ----------------------------------------------------------------------------
# Test sleep command
# ----------------------------------------------------------------------------

sleep 0.5;
sleep 1;
real_sleep 1;

# Missing parameter
--error 1
--exec echo "sleep ;" | $MYSQL_TEST 2>&1
unknown's avatar
unknown committed
917 918
--error 1
--exec echo "real_sleep ;" | $MYSQL_TEST 2>&1
919 920 921 922

# Illegal parameter
--error 1
--exec echo "sleep abc;" | $MYSQL_TEST 2>&1
unknown's avatar
unknown committed
923 924
--error 1
--exec echo "real_sleep abc;" | $MYSQL_TEST 2>&1
925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980

# ----------------------------------------------------------------------------
# Test inc
# ----------------------------------------------------------------------------
inc $i;
echo $i;
inc $i;
echo $i;
let $i=100;
inc $i;
echo $i;

let $i=hej;
echo $i;
inc $i;
echo $i;

--error 1
--exec echo "inc;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "inc i;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "let \$i=100; inc \$i 1000; echo \$i;" | $MYSQL_TEST 2>&1

inc $i; inc $i; inc $i; --echo $i
echo $i;


# ----------------------------------------------------------------------------
# Test dec
# ----------------------------------------------------------------------------

dec $d;
echo $d;
dec $d;
echo $d;
let $d=100;
dec $d;
echo $d;

let $d=hej;
echo $d;
dec $d;
echo $d;

--error 1
--exec echo "dec;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "dec i;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "let \$i=100; dec \$i 1000; echo \$i;" | $MYSQL_TEST 2>&1


# ----------------------------------------------------------------------------
# Test system
# ----------------------------------------------------------------------------
981
#system ls > /dev/null;
982
system echo "hej" > /dev/null;
983
#--system ls > /dev/null
984 985 986 987 988 989 990 991
--system echo "hej" > /dev/null;

--error 1
--exec echo "system;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "system $NONEXISTSINFVAREABLI;" | $MYSQL_TEST 2>&1

--disable_abort_on_error
unknown's avatar
unknown committed
992
system NonExistsinfComamdn 2> /dev/null;
993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008
--enable_abort_on_error


# ----------------------------------------------------------------------------
# Test delimiter
# ----------------------------------------------------------------------------

delimiter stop;
echo teststop
delimiter ;stop
echo test2;
--delimiter stop
echo test3stop
--delimiter ;
echo test4;

1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039
# ----------------------------------------------------------------------------
# Test that delimiter within if() works in in various combinations
# ----------------------------------------------------------------------------

if (0)
{
  delimiter ||;
  echo false-inner||
  if (0)
  {
    delimiter *||
    echo false-innerer*
    delimiter ||*
  }
  echo false-inner again||
}
echo outer;
if (1)
{
  delimiter /;
  echo true-inner/
  if (0)
  {
    delimiter %/
    echo true-innerer%
  }
  echo true-inner again/
}
echo true-outer/
delimiter ;/

unknown's avatar
unknown committed
1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054

# ----------------------------------------------------------------------------
# Test if
# ----------------------------------------------------------------------------

let $counter=10;
if ($counter)
{
  echo Counter is greater than 0, (counter=10);
}
if (!$counter)
{
  echo Counter is not 0, (counter=10);
}
let $counter=0;
1055
if($counter)
unknown's avatar
unknown committed
1056 1057 1058 1059 1060 1061 1062 1063
{
  echo Counter is greater than 0, (counter=0);
}
if (!$counter)
{
  echo Counter is not 0, (counter=0);
}

1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076
# ----------------------------------------------------------------------------
# Test while, { and }
# ----------------------------------------------------------------------------

let $i=1;
while ($i)
{
  echo $i;
  dec $i;
}
# One liner
#let $i=1;while ($i){echo $i;dec $i;}

unknown's avatar
unknown committed
1077 1078 1079 1080 1081 1082
let $i=0;
while (!$i)
{
  echo Testing while with not;
  inc $i;
}
1083 1084

# Exceed max nesting level
unknown's avatar
unknown committed
1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest_while.inc
let $1 = 10;
while ($1)
{
while ($1)
{
while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
 while ($1)
{
  echo $1;
  dec $1;
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
}
EOF
# Fix win path
--replace_result \\ / $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
1226
--error 1
unknown's avatar
unknown committed
1227 1228
--exec echo "source $MYSQLTEST_VARDIR/tmp/mysqltest_while.inc;" | $MYSQL_TEST 2>&1
--remove_file $MYSQLTEST_VARDIR/tmp/mysqltest_while.inc
1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240
--error 1
--exec echo "while \$i;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "while (\$i;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "let \$i=1; while (\$i) dec \$i;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "};" | $MYSQL_TEST 2>&1
--error 1
--exec echo "end;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "{;" | $MYSQL_TEST 2>&1
1241

1242 1243 1244 1245
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
while (0)
echo hej;
EOF
1246
--error 1
unknown's avatar
unknown committed
1247
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
1248
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
1249

1250 1251 1252 1253
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
while (0)
{echo hej;
EOF
1254
--error 1
unknown's avatar
unknown committed
1255
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
1256
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
1257

1258 1259 1260 1261
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
while (0){
 echo hej;
EOF
1262
--error 1
unknown's avatar
unknown committed
1263
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
1264

1265 1266
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;

1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292
# ----------------------------------------------------------------------------
# Test error messages returned from comments starting with a command
# ----------------------------------------------------------------------------
--error 1
--exec echo "--if the other server is down" | $MYSQL_TEST 2>&1

--error 1
--exec echo "-- end when ..." | $MYSQL_TEST 2>&1

# ----------------------------------------------------------------------------
# Test replace
# ----------------------------------------------------------------------------
--replace_result a b
select "a" as col1, "c" as col2;

--replace_result a b c d
select "a" as col1, "c" as col2;

--error 1
--exec echo "--replace_result a" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--replace_result a;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_result a;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_result a ;" | $MYSQL_TEST 2>&1
1293
--exec echo "replace_result a b; echo OK; exit;" | $MYSQL_TEST 2>&1
1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323
--error 1
--exec echo "--replace_result a b c" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_result a b c ;" | $MYSQL_TEST 2>&1


--replace_column 1 b
select "a" as col1, "c" as col2;

--replace_column 1 b 2 d
select "a" as col1, "c" as col2;

--error 1
--exec echo "--replace_column a" | $MYSQL_TEST 2>&1

--error 1
--exec echo "--replace_column 1" | $MYSQL_TEST 2>&1

--error 1
--exec echo "--replace_column a b" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--replace_column a 1" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--replace_column 1 b c " | $MYSQL_TEST 2>&1


# ----------------------------------------------------------------------------
# Test sync_with_master
# ----------------------------------------------------------------------------
--error 1
1324
--exec echo "sync_with_master 10!;" | $MYSQL_TEST 2>&1
1325
--error 1
1326
--exec echo "sync_with_master a;" | $MYSQL_TEST 2>&1
1327

unknown's avatar
unknown committed
1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356
# ----------------------------------------------------------------------------
# Test connect
# ----------------------------------------------------------------------------

--error 1
--exec echo "connect;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect ();" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect (con2);" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect (con2,);" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect (con2,localhost,root,,illegal_db);" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect (con1,localhost,root,,,illegal_port,);" | $MYSQL_TEST 2>&1
--error 1
--exec echo "connect (con1,localhost,root,,,,,SMTP POP);" | $MYSQL_TEST 2>&1

# Repeat connect/disconnect
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
let $i=100;
while ($i)
{
  connect (test_con1,localhost,root,,);
  disconnect test_con1;
  dec $i;
}
EOF
1357
--exec echo "source $MYSQLTEST_VARDIR/tmp/mysqltest.sql; echo OK; exit;" | $MYSQL_TEST 2>&1
1358
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
unknown's avatar
unknown committed
1359

1360
# Repeat connect/disconnect
1361 1362 1363 1364 1365 1366 1367 1368 1369
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
let $i=200;
while ($i)
{
 connect (test_con1,localhost,root,,);
 disconnect test_con1;
 dec $i;
}
EOF
unknown's avatar
unknown committed
1370 1371 1372
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
--error 1
--exec echo "source $MYSQLTEST_VARDIR/tmp/mysqltest.sql;" | $MYSQL_TEST 2>&1
1373
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
unknown's avatar
unknown committed
1374 1375

# Select disconnected connection
1376 1377 1378 1379 1380
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
connect (test_con1,localhost,root,,);
disconnect test_con1;
connection test_con1;
EOF
unknown's avatar
unknown committed
1381 1382 1383
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
--error 1
--exec echo "source $MYSQLTEST_VARDIR/tmp/mysqltest.sql;" | $MYSQL_TEST 2>&1
1384
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;
unknown's avatar
unknown committed
1385 1386

# Connection name already used
1387 1388 1389 1390
--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
connect (test_con1,localhost,root,,);
connect (test_con1,localhost,root,,);
EOF
unknown's avatar
unknown committed
1391 1392 1393 1394
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
--error 1
--exec echo "source $MYSQLTEST_VARDIR/tmp/mysqltest.sql;" | $MYSQL_TEST 2>&1

1395 1396
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;

unknown's avatar
unknown committed
1397 1398 1399 1400 1401 1402
# connect when "disable_abort_on_error" caused "connection not found"
--replace_result $MASTER_MYSOCK MASTER_SOCKET $MASTER_MYPORT MASTER_PORT
--disable_abort_on_error
connect (con1,localhost,root,,);
connection default;
connection con1;
1403
disconnect con1;
unknown's avatar
unknown committed
1404
--enable_abort_on_error
1405

1406 1407 1408 1409 1410 1411 1412
# Test connect without a database
connect (con2,localhost,root,,*NO-ONE*);
--error ER_NO_DB_ERROR
show tables;
disconnect con2;
connection default;

1413 1414 1415 1416 1417
# ----------------------------------------------------------------------------
# Test mysqltest arguments
# ----------------------------------------------------------------------------

# -x <file_name>, use the file specified after -x as the test file
1418 1419 1420
--exec $MYSQL_TEST < $MYSQL_TEST_DIR/include/mysqltest-x.inc
--exec $MYSQL_TEST -x $MYSQL_TEST_DIR/include/mysqltest-x.inc
--exec $MYSQL_TEST --test_file=$MYSQL_TEST_DIR/include/mysqltest-x.inc
unknown's avatar
unknown committed
1421 1422
# Fix Win paths
--replace_result \\ /
1423 1424
--error 1
--exec $MYSQL_TEST -x non_existing_file.inc 2>&1
1425 1426


1427
# ----------------------------------------------------------------------------
1428
# TODO Test queries, especially their errormessages... so it's easy to debug
1429 1430 1431
# new scripts and diagnose errors
# ----------------------------------------------------------------------------

1432
# ----------------------------------------------------------------------------
1433
# Test Bug#12386
1434 1435 1436 1437
# ----------------------------------------------------------------------------
let $num= 2;
while ($num)
{
1438 1439
   --error ER_PARSE_ERROR

1440 1441 1442 1443 1444 1445
   failing_statement;

   dec $num;
}

SELECT 1 as a;
1446

unknown's avatar
unknown committed
1447 1448

#
1449
# Bug#10251 Identifiers containing quotes not handled correctly
unknown's avatar
unknown committed
1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469
#
select 1 as `a'b`, 2 as `a"b`;

# Test escaping of quotes
select 'aaa\\','aa''a',"aa""a";

#
# Check of include/show_msg.inc and include/show_msg80.inc
#

# The message contains in most cases a string with the default character set
let $message= Here comes a message;
--source include/show_msg.inc

# The message could also contain a string with character set utf8
let $message= `SELECT USER()`;
--source include/show_msg.inc

# The message contains more then 80 characters on multiple lines
# and is kept between double quotes.
1470
let $message=
unknown's avatar
unknown committed
1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497
"Here comes a very very long message that
    - is longer then 80 characters    and
    - consists of several lines";
--source include/show_msg80.inc

# The message contains more then 80 characters on multiple lines
# and uses the auxiliary character "." at the beginning of the message lines.
let $message= . Here comes a very very long message that
              .      - is longer then 80 characters    and
              .      - consists of several lines;
--source include/show_msg80.inc

#
# Test --enable_parsing / disable_parsing
#
--disable_query_log
--disable_parsing
# The following will not enable query logging
--enable_query_log
select "this will not be executed";
--enable_parsing
select "this will be executed";
--enable_query_log

#
# Test zero length result file. Should not pass
#
1498
--exec echo '' > $MYSQLTEST_VARDIR/tmp/zero_length_file.result
unknown's avatar
unknown committed
1499 1500
--exec echo "echo ok;" > $MYSQLTEST_VARDIR/tmp/query.sql
--error 1
1501 1502 1503
--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/query.sql -R $MYSQLTEST_VARDIR/tmp/zero_length_file.result  > /dev/null 2>&1

remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.result;
1504
--error 0,1
1505
remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.reject;
1506
--error 0,1
1507 1508
remove_file $MYSQLTEST_VARDIR/tmp/zero_length_file.log;
--error 0,1
1509
remove_file $MYSQL_TEST_DIR/r/zero_length_file.reject;
1510

unknown's avatar
unknown committed
1511 1512 1513 1514 1515 1516 1517
#
# Test that a test file that does not generate any output fails.
#
--exec echo "let \$i= 1;" > $MYSQLTEST_VARDIR/tmp/query.sql
--error 1
--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/query.sql  2>&1

1518 1519
remove_file $MYSQLTEST_VARDIR/tmp/query.sql;

unknown's avatar
unknown committed
1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530
#
# Test that mysqltest fails when there are no queries executed
# but a result file exists
# NOTE! This will never happen as long as it's not allowed to have
# test files that produce no output
#--exec echo "something" > $MYSQLTEST_VARDIR/tmp/result_file.result
#--exec echo "let \$i= 1;" > $MYSQLTEST_VARDIR/tmp/query.sql
#--error 1
#--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/query.sql -R $MYSQLTEST_VARDIR/tmp/result_file.result 2>&1

#
1531 1532
# Bug#11731 mysqltest in multi-statement queries ignores errors in
#           non-1st queries
unknown's avatar
unknown committed
1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548
#

echo Failing multi statement query;
# PS does not support multi statement
--exec echo "--disable_ps_protocol"                    > $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "delimiter ||||;"                         >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "create table t1 (a int primary key);"    >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "insert into t1 values (1);"              >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "select 'select-me';"                     >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "insertz 'error query'||||"               >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "delimiter ;||||"                         >> $MYSQLTEST_VARDIR/tmp/bug11731.sql

--error 1
--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/bug11731.sql 2>&1
drop table t1;

1549
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
unknown's avatar
unknown committed
1550 1551 1552
--error 1
--exec $MYSQL_TEST --record -x $MYSQLTEST_VARDIR/tmp/bug11731.sql -R $MYSQLTEST_VARDIR/tmp/bug11731.out 2>&1
# The .out file should be non existent
1553 1554
--error 1
--file_exists $MYSQLTEST_VARDIR/tmp/bug11731.out
unknown's avatar
unknown committed
1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567
drop table t1;


echo Multi statement using expected error;
# PS does not support multi statement
--exec echo "--disable_ps_protocol"                    > $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "delimiter ||||;"                         >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "--error 1064"                            >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "create table t1 (a int primary key);"    >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "insert into t1 values (1);"              >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "select 'select-me';"                     >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "insertz "error query"||||"               >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
--exec echo "delimiter ;||||"                         >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
1568
--exec echo "exit;"                                   >> $MYSQLTEST_VARDIR/tmp/bug11731.sql
unknown's avatar
unknown committed
1569 1570 1571 1572 1573 1574 1575

# These two should work since the error is expected
--exec $MYSQL_TEST -x $MYSQLTEST_VARDIR/tmp/bug11731.sql  2>&1
drop table t1;

--exec $MYSQL_TEST --record -x $MYSQLTEST_VARDIR/tmp/bug11731.sql -R $MYSQLTEST_VARDIR/tmp/bug11731.out 2>&1
# The .out file should exist
1576
--file_exists $MYSQLTEST_VARDIR/tmp/bug11731.out
unknown's avatar
unknown committed
1577
drop table t1;
1578
remove_file $MYSQLTEST_VARDIR/tmp/bug11731.out;
unknown's avatar
unknown committed
1579
remove_file $MYSQLTEST_VARDIR/log/bug11731.log;
1580
remove_file $MYSQLTEST_VARDIR/tmp/bug11731.sql;
unknown's avatar
unknown committed
1581 1582

#
1583
# Bug#19890 mysqltest "query" command is broken
unknown's avatar
unknown committed
1584 1585 1586 1587
#

# It should be possible to use the command "query" to force mysqltest to
# send the command to the server although it's a builtin mysqltest command.
1588 1589
--error ER_PARSE_ERROR

unknown's avatar
unknown committed
1590 1591
query sleep;

1592 1593
--error ER_PARSE_ERROR

unknown's avatar
unknown committed
1594 1595 1596
--query sleep

# Just an empty query command
1597 1598
--error ER_EMPTY_QUERY

unknown's avatar
unknown committed
1599 1600 1601 1602 1603 1604 1605 1606 1607 1608
query ;

# test for replace_regex
--replace_regex /at/b/
select "at" as col1, "c" as col2;

--replace_regex /at/b/i
select "at" as col1, "AT" as col2, "c" as col3;

--replace_regex /a/b/ /ct/d/
1609
select "a" as col1, "ct" as col2;
unknown's avatar
unknown committed
1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626

--replace_regex /(strawberry)/raspberry and \1/ /blueberry/blackberry/ /potato/tomato/;
select "strawberry","blueberry","potato";

--error 1
--exec echo "--replace_regex a" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--replace_regex a;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_regex a;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_regex a ;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "replace_regex a b; echo OK;" | $MYSQL_TEST 2>&1
--error 1
--exec echo "--replace_regex /a b c" | $MYSQL_TEST 2>&1
--error 1
1627
--exec echo "replace_regex /a /b c ;" | $MYSQL_TEST 2>&1
unknown's avatar
unknown committed
1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638

# REQUIREMENT
#   replace_regex should replace substitutions from left to right in output

create table t1 (a int, b int);
insert into t1 values (1,3);
insert into t1 values (2,4);
--replace_regex /A/C/ /B/D/i /3/2/ /2/1/
select * from t1;
drop table t1;

1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689
# ----------------------------------------------------------------------------
# Tests of send
# ----------------------------------------------------------------------------

create table t1 ( f1 char(10));
insert into t1 values ("Abcd");

# 1. Basic test

send select * from t1;
reap;

# 2. Test with error

--send select * from t2;
--error ER_NO_SUCH_TABLE
--reap

# 3. test send of next stmt

--send
select * from t1;
--reap

# 4. Non-query stmt betwen send and reap allowed

--send select * from t1;
--sleep 0.05
--echo Result coming up
--reap

# 5. Test of send_eval

--let $my_stmt= select * from t1;
--send_eval $my_stmt
--reap

# 6. Test that mysqltest does not allow query stmt between send and reap
# Untestable directly as it causes mysqltest to fail

--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.in
--send select * from t1;
select 1;
--reap
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.in 2>&1
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.in;

drop table t1;

unknown's avatar
unknown committed
1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708
# ----------------------------------------------------------------------------
# test for remove_file
# ----------------------------------------------------------------------------

--error 1
--exec echo "remove_file ;" | $MYSQL_TEST 2>&1

--error 1
remove_file non_existing_file;

# ----------------------------------------------------------------------------
# test for write_file
# ----------------------------------------------------------------------------
--error 1
--exec echo "write_file ;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "write_file filename ;" | $MYSQL_TEST 2>&1

1709 1710 1711
# Comment out this test as it confuses cmd.exe with unmatched "
#--error 1
#--exec echo "write_file filename \";" | $MYSQL_TEST 2>&1
unknown's avatar
unknown committed
1712 1713 1714 1715 1716

write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
Content for test_file1
EOF
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
1717
cat_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
unknown's avatar
unknown committed
1718 1719 1720 1721 1722 1723
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;

write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp END_DELIMITER;
Content for test_file1 contains EOF
END_DELIMITER
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
1724 1725 1726 1727 1728 1729

# write to already exisiting file
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
--error 1
--exec echo "write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;" | $MYSQL_TEST 2>&1

unknown's avatar
unknown committed
1730 1731
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;

1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750
# ----------------------------------------------------------------------------
# test for append_file
# ----------------------------------------------------------------------------

write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
Content for test_file1
EOF
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;

append_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
Appended text
EOF
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;

remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
append_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
Appended text on nonexisting file
EOF

1751 1752
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;

1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766
# Test append_file within while
let $outer= 2; # Number of outer loops
while ($outer)
{
  append_file $MYSQLTEST_VARDIR/tmp/app_while.tmp;
These lines should be repeated,
if things work as expected
EOF
  dec $outer;
}

cat_file $MYSQLTEST_VARDIR/tmp/app_while.tmp;
remove_file $MYSQLTEST_VARDIR/tmp/app_while.tmp;

unknown's avatar
unknown committed
1767 1768 1769 1770 1771 1772 1773 1774 1775 1776
# ----------------------------------------------------------------------------
# test for cat_file
# ----------------------------------------------------------------------------

--write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp
Some data
for cat_file command
of mysqltest
EOF
cat_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
1777
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
unknown's avatar
unknown committed
1778 1779 1780 1781

--error 1
--exec echo "cat_file non_existing_file;" | $MYSQL_TEST 2>&1

1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803
# ----------------------------------------------------------------------------
# test for diff_files
# ----------------------------------------------------------------------------

--write_file $MYSQLTEST_VARDIR/tmp/diff1.tmp
Some data
for diff_file command
of mysqltest
EOF

--write_file $MYSQLTEST_VARDIR/tmp/diff2.tmp
Some data
for diff_file command
of mysqltest
EOF

--write_file $MYSQLTEST_VARDIR/tmp/diff3.tmp
Some other data
for diff_file command
of mysqltest
EOF

1804 1805 1806 1807 1808 1809
--write_file $MYSQLTEST_VARDIR/tmp/diff4.tmp
Some data
for diff_file command
of musqltest
EOF

1810 1811 1812 1813
# Compare equal files
--diff_files $MYSQLTEST_VARDIR/tmp/diff1.tmp $MYSQLTEST_VARDIR/tmp/diff2.tmp
--diff_files $MYSQLTEST_VARDIR/tmp/diff2.tmp $MYSQLTEST_VARDIR/tmp/diff1.tmp

1814 1815 1816 1817 1818 1819 1820
# Compare files that differ in size
--error 2
--diff_files $MYSQLTEST_VARDIR/tmp/diff1.tmp $MYSQLTEST_VARDIR/tmp/diff3.tmp
--error 2
--diff_files $MYSQLTEST_VARDIR/tmp/diff3.tmp $MYSQLTEST_VARDIR/tmp/diff1.tmp

# Compare files that differ only in content
1821
--error 1
1822
--diff_files $MYSQLTEST_VARDIR/tmp/diff1.tmp $MYSQLTEST_VARDIR/tmp/diff4.tmp
1823
--error 1
1824
--diff_files $MYSQLTEST_VARDIR/tmp/diff4.tmp $MYSQLTEST_VARDIR/tmp/diff1.tmp
1825 1826 1827 1828

# Compare equal files, again...
--diff_files $MYSQLTEST_VARDIR/tmp/diff1.tmp $MYSQLTEST_VARDIR/tmp/diff2.tmp

1829 1830 1831 1832 1833 1834
--remove_file $MYSQLTEST_VARDIR/tmp/diff1.tmp
--remove_file $MYSQLTEST_VARDIR/tmp/diff2.tmp
--remove_file $MYSQLTEST_VARDIR/tmp/diff3.tmp
--remove_file $MYSQLTEST_VARDIR/tmp/diff4.tmp


unknown's avatar
unknown committed
1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871
# ----------------------------------------------------------------------------
# test for file_exist
# ----------------------------------------------------------------------------
--error 1
--exec echo "file_exists ;" | $MYSQL_TEST 2>&1

--error 0,1
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
write_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
Content for test_file1
EOF
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
remove_file $MYSQLTEST_VARDIR/tmp/test_file1.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/test_file1.tmp;


# ----------------------------------------------------------------------------
# test for copy_file
# ----------------------------------------------------------------------------
--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
file1
EOF

copy_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
remove_file $MYSQLTEST_VARDIR/tmp/file1.tmp;
remove_file $MYSQLTEST_VARDIR/tmp/file2.tmp;

--error 1
--exec echo "copy_file ;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "copy_file from_file;" | $MYSQL_TEST 2>&1

1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921

# ----------------------------------------------------------------------------
# test for move_file
# ----------------------------------------------------------------------------

# - Check that if source file does not exist, nothing will be created.

--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
--error 1
move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;

# - Check that if source file exists, everything works properly.

--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
file1
EOF

move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;

# - Check that if destination file exists, everything works properly.
#   (file2.tmp exists from the previous check; file1.tmp needs to be created)

--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
file1
EOF

move_file $MYSQLTEST_VARDIR/tmp/file1.tmp $MYSQLTEST_VARDIR/tmp/file2.tmp;
--error 1
file_exists $MYSQLTEST_VARDIR/tmp/file1.tmp;
file_exists $MYSQLTEST_VARDIR/tmp/file2.tmp;
remove_file $MYSQLTEST_VARDIR/tmp/file2.tmp;

# - Check usage.

--error 1
--exec echo "move_file ;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "move_file from_file;" | $MYSQL_TEST 2>&1

unknown's avatar
unknown committed
1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936
# ----------------------------------------------------------------------------
# test for chmod
# ----------------------------------------------------------------------------
--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
file1
EOF

chmod 0000 $MYSQLTEST_VARDIR/tmp/file1.tmp;
# The below write fails, but --error is not implemented
# for write_file
#--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
#test should fail
#EOF

chmod 0777 $MYSQLTEST_VARDIR/tmp/file1.tmp;
1937
remove_file $MYSQLTEST_VARDIR/tmp/file1.tmp;
unknown's avatar
unknown committed
1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962
--write_file $MYSQLTEST_VARDIR/tmp/file1.tmp
test2
EOF

remove_file $MYSQLTEST_VARDIR/tmp/file1.tmp;

--error 1
--exec echo "chmod ;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "chmod 0 from_file;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "chmod 08 from_file;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "chmod from_file;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "chmod ABZD from_file;" | $MYSQL_TEST 2>&1

--error 1
--exec echo "chmod 06789 from_file;" | $MYSQL_TEST 2>&1


unknown's avatar
unknown committed
1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989
# ----------------------------------------------------------------------------
# test for perl
# ----------------------------------------------------------------------------
--perl
print "hello\n";
EOF

--perl EOF
print "hello\n";
EOF

--perl DELIMITER
print "hello\n";
DELIMITER

--error 1
--exec echo "perl TOO_LONG_DELIMITER ;" | $MYSQL_TEST 2>&1

perl;
print "hello\n";
EOF

perl;
  # Print "hello"
  print "hello\n";
EOF

1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003
# Test perl within while, also with if being false first iteration
let $outer= 3;
let $ifval= 0;
while ($outer) {
  if ($ifval) {
    perl UNTIL;
      my $val= 5;
      print "val is $val\n";
UNTIL
  }
  inc $ifval;
  dec $outer;
}

2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017
# ----------------------------------------------------------------------------
# test for die
# ----------------------------------------------------------------------------

--error 1
--exec echo "die test of die;" | $MYSQL_TEST 2>&1


# ----------------------------------------------------------------------------
# test for exit
# ----------------------------------------------------------------------------

--exec echo "echo Some output; exit; echo Not this;" | $MYSQL_TEST 2>&1

2018
# ----------------------------------------------------------------------------
2019
# test for sorted_result
2020 2021 2022 2023 2024 2025
# ----------------------------------------------------------------------------

create table t1( a int, b char(255), c timestamp);
insert into t1 values(1, 'Line 1', '2007-04-05'), (2, "Part 2", '2007-04-05');
insert into t1 values(1, 'Line 1', '2007-04-05'), (2, "Part 3", '2007-04-05');
select * from t1;
2026
--sorted_result
2027 2028 2029
select * from t1;
# Should not be sorted
select * from t1;
2030
disable_result_log;
2031
sorted_result;
2032
select * from t1;
2033
enable_result_log;
2034
--sorted_result
2035
select '';
2036
sorted_result;
2037
select "h";
2038
--sorted_result
2039
select "he";
2040
--sorted_result
2041
select "hep";
2042
--sorted_result
2043
select "hepp";
2044

2045
drop table t1;
2046

2047
# 1. Assignment of result set sorting
2048
sorted_result;
2049 2050 2051
 SELECT 2 as "my_col"
UNION
SELECT 1;
2052 2053
#
--sorted_result
2054
SELECT 2 as "my_col" UNION SELECT 1;
2055
--sorted_result
2056 2057 2058 2059 2060
SELECT 2 as "my_col"
UNION
SELECT 1;

# 2. Ensure that the table header will be not sorted into the result
2061
--sorted_result
2062 2063 2064 2065
SELECT '2' as "3"
UNION
SELECT '1';

2066 2067 2068 2069 2070
# 3. Ensure that an empty result set does not cause problems
CREATE TABLE t1( a CHAR);
--sorted_result
SELECT * FROM t1;
DROP TABLE t1;
2071

2072 2073
# 4. Ensure that NULL values within the result set do not cause problems
SELECT NULL as "my_col1",2 AS "my_col2"
2074
UNION
2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094
SELECT NULL,1;
--sorted_result
SELECT NULL as "my_col1",2 AS "my_col2"
UNION
SELECT NULL,1;
#
SELECT 2 as "my_col1",NULL AS "my_col2"
UNION
SELECT 1,NULL;
--sorted_result
SELECT 2 as "my_col1",NULL AS "my_col2"
UNION
SELECT 1,NULL;

# 5. "sorted_result" changes nothing when applied to a non query statement.
sorted_result;
 SET @a = 17;
#
# 6. Show that "sorted_result;" before the "SET @a = 17;" above does not affect
# the now following query.
2095 2096 2097 2098
SELECT 2 as "my_col"
UNION
SELECT 1;

2099
# 7. Ensure that "sorted_result" in combination with $variables works
2100 2101 2102
let $my_stmt=SELECT 2 as "my_col"
UNION
SELECT 1;
2103
--sorted_result
2104 2105
eval $my_stmt;

2106 2107 2108
# 8. Ensure that "sorted_result " does not change the semantics of
#    "--error ...." or the protocol output after such an expected failure
--sorted_result
2109 2110
--error ER_NO_SUCH_TABLE

2111 2112 2113
SELECT '2' as "my_col1",2 as "my_col2"
UNION
SELECT '1',1 from t2;
unknown's avatar
unknown committed
2114

2115
# 9. Ensure that several result formatting options including "sorted_result"
2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143
#    - have all an effect
#    - "--sorted_result" does not need to be direct before the statement
#    - Row sorting is applied after modification of the column content
--sorted_result
--replace_column 1 #
SELECT '1' as "my_col1",2 as "my_col2"
UNION
SELECT '2',1;

# 10. Ensure that at least 1024 rows within a result set do not cause problems
#
CREATE TABLE t1 (f1 INT);
INSERT INTO t1 SET f1 = 1024;
INSERT INTO t1 SELECT f1 - 1 FROM t1;
INSERT INTO t1 SELECT f1 - 2 FROM t1;
INSERT INTO t1 SELECT f1 - 4 FROM t1;
INSERT INTO t1 SELECT f1 - 8 FROM t1;
INSERT INTO t1 SELECT f1 - 16 FROM t1;
INSERT INTO t1 SELECT f1 - 32 FROM t1;
INSERT INTO t1 SELECT f1 - 64 FROM t1;
INSERT INTO t1 SELECT f1 - 128 FROM t1;
INSERT INTO t1 SELECT f1 - 256 FROM t1;
INSERT INTO t1 SELECT f1 - 512 FROM t1;
--disable_result_log
--sorted_result
SELECT * FROM t1;
--enable_result_log
DROP TABLE t1;
2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181

# ----------------------------------------------------------------------------
# test for lowercase_result
# ----------------------------------------------------------------------------

# 1. Basic test
--lowercase_result
SELECT "500g BLBRSYLTETY" AS "WILL BE lower cased";

# 2. test that it does not apply to next statement
SELECT "UPPER" AS "WILL NOT BE lower cased";

# 3. test that it does not affect non-SQL or the following statement
--lowercase_result
--echo UP
SELECT 0 as "UP AGAIN";

# 4. test that it works with eval and variables
let $lower_stmt=SELECT "ABCdef" AS "uvwXYZ";
--lowercase_result
eval $lower_stmt;

# 5. test that it works in combination with sort
sorted_result;
lowercase_result;
SELECT "Xyz" AS Name UNION SELECT "Abc" as Name ORDER BY Name DESC;

# 6. Test combination with replace, and that lower casing is done first
--lowercase_result
--replace_result old new
SELECT 1 as "SOME OLD TEXT";

# 7. Test missing lower casing of "unknown" characters
--character_set utf8
--lowercase_result
SELECT 0 as "WILL NOT lower case ";
--character_set latin1

2182 2183 2184 2185 2186 2187 2188
# ----------------------------------------------------------------------------
# Some coverage tests
# ----------------------------------------------------------------------------

--disable_query_log
--exec $MYSQL_TEST --help 2>&1 > /dev/null
--exec $MYSQL_TEST --version 2>&1 > /dev/null
unknown's avatar
unknown committed
2189
--enable_query_log
2190 2191 2192 2193
--disable_abort_on_error
--error 1
--exec $MYSQL_TEST a b c 2>&1 > /dev/null
--enable_abort_on_error
2194
--enable_query_log
unknown's avatar
unknown committed
2195

2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230
# ----------------------------------------------------------------------------
# test for query_get_value
# ----------------------------------------------------------------------------

CREATE TABLE t1(
 a int, b varchar(255), c datetime
);
SHOW COLUMNS FROM t1;

#------------ Positive tests ------------
# 1. constant parameters
#    value is simple string without spaces
let $value= query_get_value(SHOW COLUMNS FROM t1, Type, 1);
--echo statement=SHOW COLUMNS FROM t1 row_number=1, column_name="Type", Value=$value
let $value= query_get_value("SHOW COLUMNS FROM t1", Type, 1);
--echo statement="SHOW COLUMNS FROM t1" row_number=1, column_name="Type", Value=$value
#
# 2. $variables as parameters
#    value IS NULL
let $my_show= SHOW COLUMNS FROM t1;
let $column_name= Default;
let $row_number= 1;
let $value= query_get_value($my_show, $column_name, $row_number);
--echo statement=$my_show row_number=$row_number, column_name=$column_name, Value=$value
#
# 3. result set of a SELECT (not recommended, because projection and
#         selection could be done much better by pure SELECT functionality)
#    value is string with space in the middle
let $value= query_get_value(SELECT 'A B' AS "MyColumn", MyColumn, 1);
--echo value= ->$value<-
#
# 4. column name with space
let $value= query_get_value(SELECT 1 AS "My Column", My Column, 1);
--echo value= $value
#
2231 2232 2233 2234
# 4.1 Query containing , protected by quotes, quotes also on column
let $value= query_get_value('SELECT 1 as a, 2 as b', "b", 1);
--echo value= $value
#
2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319
#------------ Negative tests ------------
# 5. Incomplete statement including missing parameters
# 5.1 incomplete statement
--error 1
--exec echo "let \$value= query_get_value(SHOW;" | $MYSQL_TEST 2>&1
# 5.2 missing query
--error 1
--exec echo "let \$value= query_get_value;" | $MYSQL_TEST 2>&1
# 5.3 missing column name
--error 1
--exec echo "let \$value= query_get_value(SHOW COLUMNS FROM t1);" | $MYSQL_TEST 2>&1
# 5.4 missing row number
--error 1
--exec echo "let \$value= query_get_value(SHOW COLUMNS FROM t1, Field);" | $MYSQL_TEST 2>&1
#
# 6. Somehow "wrong" value of parameters
# 6.1 row parameter
# 6.1.1 non sense number 0
let $value= initialized;
let $value= query_get_value(SHOW COLUMNS FROM t1, Field, 0);
--echo value= $value
# 6.1.2 after the last row
let $value= initialized;
let $value= query_get_value(SHOW COLUMNS FROM t1, Field, 10);
--echo value= $value
# 6.1.3 invalid row number
--error 1
--exec echo "let \$value= query_get_value(SHOW COLUMNS FROM t1, Field, notnumber);" | $MYSQL_TEST 2>&1
# 6.2 column name parameter, name of not existing column
--error 1
--exec echo "let \$value= query_get_value(SHOW COLUMNS FROM t1, column_not_exists, 1);" | $MYSQL_TEST 2>&1
# 6.3. statement which never gives a result set
--error 1
--exec echo "let \$value= query_get_value(SET @A = 1, Field, 1);" | $MYSQL_TEST 2>&1
# 6.4. statement contains a ","
#      Note: There is no need to improve this, because we need query_get_value
#            for SHOW commands only.
--error 1
--exec echo "let \$value= query_get_value(SELECT 1 AS "A", 1 AS "B", 1);" | $MYSQL_TEST 2>&1
#
# 7. empty result set
let $value= initialized;
let $value= query_get_value(SELECT a FROM t1, a, 1);
--echo value= $value
#
# 9. failing statement
--error 1
--exec echo "let \$value= query_get_value(SHOW COLNS FROM t1, Field, 1);" | $MYSQL_TEST 2>&1
#
# 10. Artificial example how to process a complete SHOW result set:
let $show_statement= SHOW COLUMNS FROM t1;
let $rowno= 1;
let $run=1;
let $count= 0;
--echo
--echo Field Type Null Key Default Extra
while ($run)
{
   let $Field=   query_get_value($show_statement, Field,   $rowno);
   if (`SELECT '$Field' = 'No such row'`)
   {
      let $run= 0;
   }
   if (`SELECT '$Field' <> 'No such row'`)
   {
      let $Type=    query_get_value($show_statement, Type,    $rowno);
      let $Null=    query_get_value($show_statement, Null,    $rowno);
      if (`SELECT '$Null' = 'YES'`)
      {
         inc $count;
      }
      let $Key=     query_get_value($show_statement, Key,     $rowno);
      let $Default= query_get_value($show_statement, Default, $rowno);
      let $Extra=   query_get_value($show_statement, Extra,   $rowno);
      --echo $Field $Type $Null ->$Key<- $Default $Extra
      inc $rowno;
   }
}
--echo
--echo Number of columns with Default NULL: $count
--echo
eval $show_statement;

drop table t1;

2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337
# ----------------------------------------------------------------------------
# Test change_user command
# ----------------------------------------------------------------------------

--error 1
--exec echo "--change_user root,,inexistent" | $MYSQL_TEST 2>&1

--error 1
--exec echo "--change_user inexistent,,test" | $MYSQL_TEST 2>&1

--error 1
--exec echo "--change_user root,inexistent,test" | $MYSQL_TEST 2>&1

--change_user
--change_user root
--change_user root,,
--change_user root,,test

2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353
# ----------------------------------------------------------------------------
# Test mkdir and rmdir command
# ----------------------------------------------------------------------------

mkdir $MYSQLTEST_VARDIR/tmp/testdir;
rmdir $MYSQLTEST_VARDIR/tmp/testdir;

# Directory already exist
mkdir $MYSQLTEST_VARDIR/tmp/testdir;
--error 1
mkdir $MYSQLTEST_VARDIR/tmp/testdir;

# Remove dir with file inside
write_file $MYSQLTEST_VARDIR/tmp/testdir/file1.txt;
hello
EOF
2354 2355 2356 2357 2358 2359 2360 2361

list_files $MYSQLTEST_VARDIR/tmp/testdir;
# list_files gets the directory list before creating the new file
list_files_write_file $MYSQLTEST_VARDIR/tmp/testdir/file2.txt $MYSQLTEST_VARDIR/tmp/testdir *;
list_files_append_file $MYSQLTEST_VARDIR/tmp/testdir/file2.txt $MYSQLTEST_VARDIR/tmp/testdir *2*;
list_files_write_file $MYSQLTEST_VARDIR/tmp/testdir/file2.txt $MYSQLTEST_VARDIR/tmp/testdir file?.txt;
list_files_append_file $MYSQLTEST_VARDIR/tmp/testdir/file3.txt $MYSQLTEST_VARDIR/tmp/testdir file*.txt;
diff_files $MYSQLTEST_VARDIR/tmp/testdir/file2.txt $MYSQLTEST_VARDIR/tmp/testdir/file3.txt;
2362 2363 2364
--error 1
rmdir $MYSQLTEST_VARDIR/tmp/testdir;

2365 2366
cat_file $MYSQLTEST_VARDIR/tmp/testdir/file3.txt;

2367
remove_file $MYSQLTEST_VARDIR/tmp/testdir/file1.txt;
2368 2369
remove_file $MYSQLTEST_VARDIR/tmp/testdir/file2.txt;
remove_file $MYSQLTEST_VARDIR/tmp/testdir/file3.txt;
2370 2371
rmdir $MYSQLTEST_VARDIR/tmp/testdir;

2372
#
2373 2374
# Bug#36041 mysql-test-run doesn't seem to string match 100% effectively
#           on Windows
2375 2376 2377 2378
#

--replace_result c:\\a.txt z
SELECT 'c:\\a.txt' AS col;
2379

2380
#
2381
# Bug#32307 mysqltest - does not detect illegal if syntax
2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399
#

let $test= 1;
if ($test){
  echo hej;
}

--write_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql
if ($mysql_errno != 1436)
{
 echo ^ Should not be allowed!
}
EOF
--error 1
--exec $MYSQL_TEST < $MYSQLTEST_VARDIR/tmp/mysqltest.sql 2>&1
remove_file $MYSQLTEST_VARDIR/tmp/mysqltest.sql;


2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413
# ----------------------------------------------------------------------------
# Test that -- is not allowed as comment, only as mysqltest builtin command
# ----------------------------------------------------------------------------

# valid
select 1;
--query select 1
--query -- a comment for the server

# Not valid, "select" is not a mysqltest command
--error 1
--exec echo "--select 1;" | $MYSQL_TEST 2>&1


2414
# ----------------------------------------------------------------------------
2415
# BUG#35701 please allow test language variables in connection and sync_slave_with_master
2416 2417 2418 2419 2420
# Test that "connection $variable" works and that $CURRENT_CONNECTION has the right value.
# ----------------------------------------------------------------------------

connect (con1,localhost,root,,);
--echo $CURRENT_CONNECTION
2421 2422
connect (con2,localhost,root,,);
--echo $CURRENT_CONNECTION
2423 2424 2425 2426 2427 2428 2429

connection default;
--echo $CURRENT_CONNECTION

connection con1;
--echo $CURRENT_CONNECTION

2430 2431 2432 2433 2434
connection con2;
--echo $CURRENT_CONNECTION

let $x= con1;
let $y= con2;
2435 2436 2437 2438 2439 2440 2441

connection $x;
--echo $CURRENT_CONNECTION

connection $y;
--echo $CURRENT_CONNECTION

2442 2443 2444 2445 2446 2447 2448 2449
# Disconnect the not selected connection
disconnect $x;
--echo $CURRENT_CONNECTION

# Disconnect the selected connection
disconnect $y;
--echo $CURRENT_CONNECTION

2450

unknown's avatar
unknown committed
2451
--echo End of tests
2452

2453
connection default;
2454 2455
# Wait till we reached the initial number of concurrent sessions
--source include/wait_until_count_sessions.inc