Commit 1a61a8b4 authored by Vasil Dimov's avatar Vasil Dimov

Merge mysql-5.1 -> mysql-5.1-innodb

parents a9f1c9f3 a6e86079
......@@ -7255,8 +7255,12 @@ void run_query_stmt(MYSQL *mysql, struct st_command *command,
mysql_free_result(res); /* Free normal result set with meta data */
/* Clear prepare warnings */
dynstr_set(&ds_prepare_warnings, NULL);
/*
Clear prepare warnings if there are execute warnings,
since they are probably duplicated.
*/
if (ds_execute_warnings.length || mysql->warning_count)
dynstr_set(&ds_prepare_warnings, NULL);
}
else
{
......
#
# Originally created by John Embretsen, 2011-01-26.
#
# Checks for the existence of Perl modules DBI and DBD::mysql as seen from the
# perl installation used by "external" executable perl scripts, i.e. scripts
# that are executed as standalone scripts interpreted by the perl installation
# specified by the "shebang" line in the top of these scripts.
#
# If either module is not found, the test will be skipped.
#
# For use in tests that call perl scripts that require these modules.
#
# This file is intended to work on Unix. Windows may need different treatment.
# Reasoning:
# - "shebangs" are not relevant on Windows, but need to be handled here.
# - Perl scripts cannot be made executable on Windows, interpreter must be
# specified.
#
# Note that if there are multiple perl installations and not all have the
# required modules, this check may fail even if the perl in path does have
# the modules available. This may happen if the perl specified by the script's
# shebang (e.g. #!/usr/bin/perl) does not have these modules, and script is
# called without specifying the perl interpreter. However, this will be
# a correct result in cases where a test calls a script with a similar shebang.
#
################################################################################
--source include/not_windows.inc
# We jump through some hoops since there is no direct way to check if an
# external command went OK or not from a mysql-test file:
#
# - In theory, we could do as simple as "exec perl -MDBI -MDBD::mysql -e 1",
# however we cannot check the result (exit code) from within a test script.
# Also, this may not yield the same result as other uses of perl due to the
# shebang issue mentioned above.
# - Instead we use a separate helper perl script that checks for the modules.
# - If the modules are found, the perl script leaves a file which sets a
# variable that can be read by this file.
# If the modules are not found, the perl script does not set this variable,
# but leaves an empty file instead.
#
# This is done because there is apparently no direct way to transfer
# information from perl to the test script itself.
--disable_query_log
--disable_result_log
--disable_warnings
# We do not use embedded perl in this script because that would not have yielded
# correct results for a situation where an external Perl script is called like
# "scriptname" instead of "perl scriptname" and the shebang in the script points
# to a specific perl that may be different than the perl in PATH.
#
# Instead, we call a separate helper script which checks for the modules in its
# own environment. We call it without "perl" in front.
--let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-mysql.pl
--let $resultFile= $MYSQL_TMP_DIR/dbidbd-mysql.txt
# Make the script executable and execute it.
--chmod 0755 $perlChecker
--exec $perlChecker
# Source the resulting temporary file and look for a variable being set.
--source $resultFile
if (!$dbidbd) {
--skip Test needs Perl modules DBI and DBD::mysql
}
# Clean up
--remove_file $resultFile
--enable_query_log
--enable_result_log
--enable_warnings
......@@ -4,12 +4,26 @@
--source include/not_windows.inc
--source include/not_embedded.inc
--source include/have_dbi_dbd-mysql.inc
if ($MYSQLHOTCOPY)
if (!$MYSQLHOTCOPY)
{
# Fail the test if the mysqlhotcopy script is missing.
# If the tool's location changes, mysql-test-run.pl must be updated to
# reflect this (look for "MYSQLHOTCOPY").
die due to missing mysqlhotcopy tool;
}
# NOTE (johnemb, 2011-01-26):
# In this test mysqlhotcopy (a perl script) is executed as a standalone
# executable, i.e. not necessarily using the perl interpreter in PATH,
# because that is how the documentation demonstrates it.
#
# We include have_dbi_dbd-mysql.inc above so that the test will
# be skipped if Perl modules required by the mysqlhotcopy tool are not
# found when the script is run this way.
let $MYSQLD_DATADIR= `SELECT @@datadir`;
--disable_warnings
DROP DATABASE IF EXISTS hotcopy_test;
......
......@@ -2141,10 +2141,12 @@ sub environment_setup {
# mysqlhotcopy
# ----------------------------------------------------
my $mysqlhotcopy=
mtr_pl_maybe_exists("$basedir/scripts/mysqlhotcopy");
# Since mysqltest interprets the real path as "false" in an if,
# use 1 ("true") to indicate "not exists" so it can be tested for
$ENV{'MYSQLHOTCOPY'}= $mysqlhotcopy || 1;
mtr_pl_maybe_exists("$basedir/scripts/mysqlhotcopy") ||
mtr_pl_maybe_exists("$path_client_bindir/mysqlhotcopy");
if ($mysqlhotcopy)
{
$ENV{'MYSQLHOTCOPY'}= $mysqlhotcopy;
}
# ----------------------------------------------------
# perror
......@@ -4093,8 +4095,10 @@ sub check_expected_crash_and_restart {
{
mtr_verbose("Crash was expected, file '$expect_file' exists");
for (my $waits = 0; $waits < 50; $waits++)
for (my $waits = 0; $waits < 50; mtr_milli_sleep(100), $waits++)
{
# Race condition seen on Windows: try again until file not empty
next if -z $expect_file;
# If last line in expect file starts with "wait"
# sleep a little and try again, thus allowing the
# test script to control when the server should start
......@@ -4103,10 +4107,11 @@ sub check_expected_crash_and_restart {
if ($last_line =~ /^wait/ )
{
mtr_verbose("Test says wait before restart") if $waits == 0;
mtr_milli_sleep(100);
next;
}
# Ignore any partial or unknown command
next unless $last_line =~ /^restart/;
# If last line begins "restart:", the rest of the line is read as
# extra command line options to add to the restarted mysqld.
# Anything other than 'wait' or 'restart:' (with a colon) will
......@@ -4471,6 +4476,8 @@ sub mysqld_start ($$) {
my @all_opts= @$extra_opts;
if (exists $mysqld->{'restart_opts'}) {
push (@all_opts, @{$mysqld->{'restart_opts'}});
mtr_verbose(My::Options::toStr("mysqld_start restart",
@{$mysqld->{'restart_opts'}}));
}
mysqld_arguments($args,$mysqld,\@all_opts);
......
drop table if exists t1;
#
# Bug#57924: crash when creating partitioned table with
# multiple columns in the partition key
#
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(a, b, a);
ERROR HY000: Field in list of fields for partition function not found in table
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(A, b);
DROP TABLE t1;
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(a, b, A);
ERROR HY000: Field in list of fields for partition function not found in table
#
# Bug#54483: valgrind errors when making warnings for multiline inserts
# into partition
#
......
#!/usr/bin/perl
# Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public
# License as published by the Free Software Foundation; version 2
# of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Library General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
################################################################################
#
# This perl script checks for availability of the Perl modules DBI and
# DBD::mysql using the "current" perl interpreter.
#
# Useful for test environment checking before testing executable perl scripts
# in the MySQL Server distribution.
#
# NOTE: The "shebang" on the first line of this script should always point to
# /usr/bin/perl, so that we can use this script to check whether or not we
# support running perl scripts with such a shebang without specifying the
# perl interpreter on the command line. Such a script is mysqlhotcopy.
#
# When run as "checkDBI_DBD-mysql.pl" the shebang line will be evaluated
# and used. When run as "perl checkDBI_DBD-mysql.pl" the shebang line is
# not used.
#
# NOTE: This script will create a temporary file in MTR's tmp dir.
# If modules are found, a mysql-test statement which sets a special
# variable is written to this file. If one of the modules is not found
# (or cannot be loaded), the file will remain empty.
# A test (or include file) which sources that file can then easily do
# an if-check on the special variable to determine success or failure.
#
# Example:
#
# --let $perlChecker= $MYSQLTEST_VARDIR/std_data/checkDBI_DBD-mysql.pl
# --let $resultFile= $MYSQL_TMP_DIR/dbidbd-mysql.txt
# --chmod 0755 $perlChecker
# --exec $perlChecker
# --source $resultFile
# if (!$dbidbd) {
# --skip Test needs Perl modules DBI and DBD::mysql
# }
#
# The calling script is also responsible for cleaning up after use:
#
# --remove_file $resultFile
#
# Windows notes:
# - shebangs may work differently - call this script with "perl " in front.
#
# See mysql-test/include/have_dbi_dbd-mysql.inc for example use of this script.
# This script should be executable for the user running MTR.
#
################################################################################
BEGIN {
# By using eval inside BEGIN we can suppress warnings and continue after.
# We need to catch "Can't locate" as well as "Can't load" errors.
eval{
$FOUND_DBI=0;
$FOUND_DBD_MYSQL=0;
# Check for DBI module:
$FOUND_DBI=1 if require DBI;
# Check for DBD::mysql module
$FOUND_DBD_MYSQL=1 if require DBD::mysql;
};
};
# Open a file to be used for transfer of result back to mysql-test.
# The file must be created whether we write to it or not, otherwise mysql-test
# will complain if trying to source it.
# An empty file indicates failure to load modules.
open(FILE, ">", $ENV{'MYSQL_TMP_DIR'}.'/dbidbd-mysql.txt');
if ($FOUND_DBI && $FOUND_DBD_MYSQL) {
# write a mysql-test command setting a variable to indicate success
print(FILE 'let $dbidbd= FOUND_DBI_DBD-MYSQL;'."\n");
}
# close the file.
close(FILE);
1;
......@@ -585,6 +585,8 @@ c127 int,
c128 int,
primary key using hash(c1)) engine=ndb partition by key(c1);
drop table t1;
create table `t1` (`a` int, b int, primary key (a,b)) engine=ndb partition by key(`a`,`b`,`a`);
ERROR HY000: Field in list of fields for partition function not found in table
create table t1 (
a1234567890123456789012345678901234567890 int primary key,
a12345678901234567890123456789a1234567890 int,
......
......@@ -547,6 +547,13 @@ c128 int,
primary key using hash(c1)) engine=ndb partition by key(c1);
drop table t1;
#
# test bug#53354 - crash when creating partitioned table with multiple columns in the partition key
#
--error ER_FIELD_NOT_FOUND_PART_ERROR
create table `t1` (`a` int, b int, primary key (a,b)) engine=ndb partition by key(`a`,`b`,`a`);
#
# test max size of attribute name and truncation
#
......
......@@ -66,10 +66,10 @@ if ($found_garbage)
}
# Do a manual cleanup, because the following tests should not suffer from
# remaining files
--exec rm -f $MYSQLD_DATADIR/test/t1* || true
--remove_files_wildcard $MYSQLD_DATADIR/test t1*
if ($with_directories)
{
--exec rm -f $MYSQLTEST_VARDIR/tmp/t1* || true
--remove_files_wildcard $MYSQLTEST_VARDIR/tmp t1*
}
}
--enable_query_log
......@@ -29,14 +29,10 @@ DELETE FROM t0_definition;
let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
#echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
# Dump the current definition of the table t1 to tmp1
# This complicated method - let another mysqltest collect the output - is used
# because of two reasons
# Save the current definition of the table t1
# - SHOW CREATE TABLE t1 is at least currently most probably more reliable than
# the corresponding SELECT on the INFORMATION_SCHEMA
# - SHOW CREATE TABLE .. cannot write its out put into a file like SELECT
let $show_file= $MYSQLD_DATADIR/test/tmp1;
--exec echo "SHOW CREATE TABLE t1; exit; " | $MYSQL_TEST > $show_file 2>&1
let $show_create= `SHOW CREATE TABLE t1`;
if ($do_file_tests)
{
# List the files belonging to the table t1
......@@ -57,12 +53,13 @@ if (!$do_file_tests)
# Insert the current definition of the table t1 into t0_definition
eval INSERT INTO t0_definition SET state = 'old',
create_command = load_file('$show_file'),
create_command = "$show_create",
file_list = @aux;
# Print the create table statement into the protocol
# Added the concat to avoid changing the result files
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR '\r' ''
SELECT create_command FROM t0_definition WHERE state = 'old';
SELECT concat('SHOW CREATE TABLE t1;\nTable\tCreate Table\n',create_command,'\n') as `create_command` FROM t0_definition WHERE state = 'old';
if ($do_file_tests)
{
# We stored the list of files, therefore printing the content makes sense
......
......@@ -28,9 +28,8 @@ DELETE FROM t0_definition WHERE state = 'new';
let $MYSQLD_DATADIR= `select LEFT(@@datadir, LENGTH(@@datadir)-1)`;
#echo MYSQLD_DATADIR: $MYSQLD_DATADIR;
# Dump the current definition of the table t1 to tmp1
let $show_file= $MYSQLD_DATADIR/test/tmp1;
--exec echo "SHOW CREATE TABLE t1; exit; " | $MYSQL_TEST > $show_file 2>&1
# Save the current definition of the table t1
let $show_create= `SHOW CREATE TABLE t1`;
if ($do_file_tests)
{
......@@ -52,7 +51,7 @@ if (!$do_file_tests)
# Insert the current definition of the table t1 into t0_definition
eval INSERT INTO t0_definition SET state = 'new',
create_command = load_file('$show_file'),
create_command = "$show_create",
file_list = @aux;
# Print the old and new table layout, if they differ
......
call mtr.add_suppression("./test/t1_will_crash");
call mtr.add_suppression("t1_will_crash");
call mtr.add_suppression("Got an error from unknown thread, ha_myisam.cc");
CREATE TABLE t1_will_crash (a INT, KEY (a)) ENGINE=MyISAM;
INSERT INTO t1_will_crash VALUES (1), (2), (3), (4), (5), (6), (7), (8), (9), (10), (11);
......
......@@ -14,6 +14,7 @@ partition by range (a)
insert into t1 values (1), (11), (21), (33);
SELECT * FROM t1;
SHOW CREATE TABLE t1;
--replace_result #p# #P#
--list_files $MYSQLD_DATADIR/test
SET DEBUG_SYNC='before_open_in_get_all_tables SIGNAL parked WAIT_FOR open';
......@@ -36,6 +37,7 @@ ALTER TABLE t1 REORGANIZE PARTITION p0 INTO
disconnect con1;
connection default;
--reap
--replace_result #p# #P#
--list_files $MYSQLD_DATADIR/test
SHOW CREATE TABLE t1;
SELECT * FROM t1;
......
# test the auto-recover (--myisam-recover) of partitioned myisam tables
call mtr.add_suppression("./test/t1_will_crash");
call mtr.add_suppression("t1_will_crash");
call mtr.add_suppression("Got an error from unknown thread, ha_myisam.cc");
--source include/have_partition.inc
......@@ -20,6 +20,8 @@ FLUSH TABLES;
let $MYSQLD_DATADIR= `select @@datadir`;
--remove_file $MYSQLD_DATADIR/test/t1_will_crash.MYI
--copy_file std_data/corrupt_t1.MYI $MYSQLD_DATADIR/test/t1_will_crash.MYI
--replace_result \\ /
--replace_regex /Table '.*data/Table './
SELECT * FROM t1_will_crash;
DROP TABLE t1_will_crash;
CREATE TABLE t1_will_crash (a INT, KEY (a))
......@@ -33,5 +35,7 @@ FLUSH TABLES;
--echo # head -c1024 t1#P#p1.MYI > corrupt_t1#P#p1.MYI
--remove_file $MYSQLD_DATADIR/test/t1_will_crash#P#p1.MYI
--copy_file std_data/corrupt_t1#P#p1.MYI $MYSQLD_DATADIR/test/t1_will_crash#P#p1.MYI
--replace_result \\ /
--replace_regex /Table '.*data/Table './
SELECT * FROM t1_will_crash;
DROP TABLE t1_will_crash;
......@@ -58,8 +58,8 @@ ENGINE = InnoDB
PARTITION BY HASH (a)
PARTITIONS 2;
connect (con1,127.0.0.1,root,,test,$MASTER_MYPORT,);
connect (con2,127.0.0.1,root,,test,$MASTER_MYPORT,);
connect (con1, localhost, root,,);
connect (con2, localhost, root,,);
--connection con1
SET autocommit=OFF;
......
......@@ -13,3 +13,5 @@
rpl_row_create_table : Bug#51574 Feb 27 2010 andrei failed different way than earlier with bug#45576
rpl_log_pos : BUG#55675 Sep 10 2010 27 2010 alfranio rpl.rpl_log_pos fails sporadically with error binlog truncated in the middle
rpl_get_master_version_and_clock : Bug#59178 Jan 05 2011 joro Valgrind warnings rpl_get_master_version_and_clock
rpl_row_until : BUG#59543 Jan 26 2011 alfranio Replication test from eits suite rpl_row_until times out
rpl_stm_until : BUG#59543 Jan 26 2011 alfranio Replication test from eits suite rpl_row_until times out
......@@ -16,4 +16,4 @@ FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
WHERE VARIABLE_NAME='general_log_file';
@@global.general_log_file = VARIABLE_VALUE
1
SET @@global.general_log_file= 'test.log';
SET @@global.general_log_file= 'start_value';
......@@ -52,7 +52,7 @@ count(*)
DROP TABLE t1;
connection default;
SET @@global.general_log= 'OFF';
SET @@global.general_log_file= '/home/horst/bzr/5.1-52501/mysql-test/var/mysqld.1/mysqld.log';
SET @@global.general_log_file= 'start_general_log_file';
SET @@global.log_output= @start_value;
SET @@global.general_log= @start_general_log;
SET @@global.general_log= 'ON';
......@@ -14,4 +14,4 @@ FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
WHERE VARIABLE_NAME='slow_query_log_file';
@@global.slow_query_log_file = VARIABLE_VALUE
1
SET @@global.slow_query_log_file= 'slowtest.log';
SET @@global.slow_query_log_file= 'start_value';
......@@ -19,7 +19,7 @@
# #
################################################################################
let $save_div_precision_increment = `SELECT @@global.div_precision_increment`
let $save_div_precision_increment = `SELECT @@global.div_precision_increment`;
#SET @save_div_precision_increment = @@global.div_precision_increment;
......
......@@ -70,6 +70,7 @@ FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
WHERE VARIABLE_NAME='general_log_file';
#SET @@global.general_log_file= @start_value;
--replace_result $start_value start_value
eval SET @@global.general_log_file= '$start_value';
#####################################################
......
......@@ -115,6 +115,7 @@ file_exists $MYSQLTEST_VARDIR/run/mytest.log ;
connection default;
SET @@global.general_log= 'OFF';
#SET @@global.general_log_file= @start_general_log_file;
--replace_result $start_general_log_file start_general_log_file
eval SET @@global.general_log_file= '$start_general_log_file';
SET @@global.log_output= @start_value;
SET @@global.general_log= @start_general_log;
......
......@@ -68,6 +68,7 @@ FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES
WHERE VARIABLE_NAME='slow_query_log_file';
#SET @@global.slow_query_log_file= @start_value;
--replace_result $start_value start_value
eval SET @@global.slow_query_log_file= '$start_value';
#SELECT @start_value;
#####################################################
......
......@@ -11,7 +11,5 @@
##############################################################################
kill : Bug#37780 2008-12-03 HHunger need some changes to be robust enough for pushbuild.
query_cache_28249 : Bug#43861 2009-03-25 main.query_cache_28249 fails sporadically
main.mysqlhotcopy_myisam : Bug#56817 2010-10-21 anitha mysqlhotcopy* fails
main.mysqlhotcopy_archive: Bug#56817 2010-10-21 anitha mysqlhotcopy* fails
log_tables-big : Bug#48646 2010-11-15 mattiasj report already exists
read_many_rows_innodb : Bug#37635 2010-11-15 mattiasj report already exists
......@@ -10,6 +10,21 @@ drop table if exists t1;
let $MYSQLD_DATADIR= `SELECT @@datadir`;
--echo #
--echo # Bug#57924: crash when creating partitioned table with
--echo # multiple columns in the partition key
--echo #
--error ER_FIELD_NOT_FOUND_PART_ERROR
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(a, b, a);
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(A, b);
DROP TABLE t1;
--error ER_FIELD_NOT_FOUND_PART_ERROR
CREATE TABLE t1 (a INT, b INT, PRIMARY KEY (a,b))
PARTITION BY KEY(a, b, A);
--echo #
--echo # Bug#54483: valgrind errors when making warnings for multiline inserts
--echo # into partition
......@@ -673,7 +688,6 @@ PARTITION BY HASH (TIME_TO_SEC(a));
CREATE TABLE t1 (a INT)
PARTITION BY HASH (TIME_TO_SEC(a));
--echo #
--echo # Bug#49161: Out of memory; restart server and try again (needed 2 bytes)
--echo #
......
/* Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
/* Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......
/* Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved.
/* Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......
/* Copyright (C) 2000-2006 MySQL AB
/* Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......
/* Copyright 2005-2008 MySQL AB, 2008 Sun Microsystems, Inc.
/* Copyright (c) 2005, 2011, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......@@ -761,6 +761,9 @@ static bool handle_list_of_fields(List_iterator<char> it,
bool result;
char *field_name;
bool is_list_empty= TRUE;
int fields_handled = 0;
char* field_name_array[MAX_KEY];
DBUG_ENTER("handle_list_of_fields");
while ((field_name= it++))
......@@ -776,6 +779,25 @@ static bool handle_list_of_fields(List_iterator<char> it,
result= TRUE;
goto end;
}
/*
Check for duplicate fields in the list.
Assuming that there are not many fields in the partition key list.
If there were, it would be better to replace the for-loop
with a more efficient algorithm.
*/
field_name_array[fields_handled] = field_name;
for (int i = 0; i < fields_handled; ++i)
{
if (my_strcasecmp(system_charset_info,
field_name_array[i], field_name) == 0)
{
my_error(ER_FIELD_NOT_FOUND_PART_ERROR, MYF(0));
DBUG_RETURN(TRUE);
}
}
fields_handled++;
}
if (is_list_empty)
{
......
/* Copyright 2000-2008 MySQL AB, 2008 Sun Microsystems, Inc.
/* Copyright (c) 2000, 2011, Oracle and/or its affiliates. All rights reserved.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
......
......@@ -35,7 +35,6 @@
Fix Bug#59707 Unused compression-related parameters
in buffer pool functions
>>>>>>> MERGE-SOURCE
2011-01-18 The InnoDB Team
* include/sync0rw.h, sync/sync0arr.c, sync/sync0rw.c:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment