merged fixes for BUG#39934 to 5.1-rpl+3

Also renamed current_stmt_binlog_row_based to
current_stmt_binlog_format_row for consistency

mysql-test/extra/rpl_tests/rpl_foreign_key.test

@@ -47,7 +47,6 @@ insert into t1 set b=1;
 insert into t2 set a=1, b=1;
 
 set foreign_key_checks=0;
-set @@session.binlog_format=row;
 delete from t1;
 
 --echo must sync w/o a problem (could not with the buggy code)

mysql-test/extra/rpl_tests/rpl_insert_delayed.test

@@ -38,14 +38,14 @@ connection master;
 truncate table t1;
 # first scenario: duplicate on first row
 insert delayed into t1 values(10, "my name");
-if ($binlog_format_statement)
+if  (`SELECT @@global.binlog_format = 'STATEMENT'`)
 {
   # statement below will be converted to non-delayed INSERT and so
   # will stop at first error, guaranteeing replication.
   --error ER_DUP_ENTRY
   insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
 }
-if (!$binlog_format_statement)
+if  (`SELECT @@global.binlog_format != 'STATEMENT'`)
 {
   insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
 }
@@ -59,7 +59,7 @@ select * from t1;
 # second scenario: duplicate on second row
 connection master;
 delete from t1 where id!=10;
-if ($binlog_format_statement)
+if  (`SELECT @@global.binlog_format = 'STATEMENT'`)
 {
   # statement below will be converted to non-delayed INSERT and so
   # will be binlogged with its ER_DUP_ENTRY error code, guaranteeing
@@ -67,7 +67,7 @@ if ($binlog_format_statement)
   --error ER_DUP_ENTRY
   insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
 }
-if (!$binlog_format_statement)
+if  (`SELECT @@global.binlog_format != 'STATEMENT'`)
 {
   insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
 }
@@ -108,6 +108,7 @@ if  (`SELECT @@global.binlog_format != 'ROW'`)
 {
   #must show two INSERT DELAYED
   --replace_column 1 x 2 x 3 x 4 x 5 x
+  --replace_regex /table_id: [0-9]+/table_id: #/
   show binlog events in 'master-bin.000002' LIMIT 2,2;
 }
 select * from t1;
@@ -118,6 +119,7 @@ if  (`SELECT @@global.binlog_format != 'ROW'`)
 {
   #must show two INSERT DELAYED
   --replace_column 1 x 2 x 3 x 4 x 5 x
+  --replace_regex /table_id: [0-9]+/table_id: #/
   show binlog events in 'slave-bin.000002' LIMIT 2,2;
 }
 select * from t1;

mysql-test/extra/rpl_tests/rpl_ndb_apply_status.test

@@ -141,7 +141,9 @@ let $run= 5;
 while ($run)
 {
  START TRANSACTION;
+ --disable_warnings
  --eval CALL tpcb.trans($rpl_format);
+ --enable_warnings
  eval SET @my_errno= $mysql_errno;
  let $run_good= `SELECT @my_errno = 0`;
  let $run_bad= `SELECT @my_errno <> 0`;
@@ -190,7 +192,9 @@ let $run= 5;
 while ($run)
 {
  START TRANSACTION;
+ --disable_warnings
  --eval CALL tpcb.trans($rpl_format);
+ --enable_warnings
  eval SET @my_errno= $mysql_errno;
  let $run_good= `SELECT @my_errno = 0`;
  let $run_bad= `SELECT @my_errno <> 0`;
@@ -240,7 +244,9 @@ let $run= 5;
 while ($run)
 {
  START TRANSACTION;
+ --disable_warnings
  --eval CALL tpcb.trans($rpl_format);
+ --enable_warnings
  eval SET @my_errno= $mysql_errno;
  let $run_good= `SELECT @my_errno = 0`;
  let $run_bad= `SELECT @my_errno <> 0`;

mysql-test/include/have_example_plugin.inc

 #
-# Check if server has support for loading udf's
-# i.e it will support dlopen
+# Check if server has support for loading plugins
 #
---require r/have_dynamic_loading.require
-disable_query_log;
-show variables like 'have_dynamic_loading';
-enable_query_log;
+if (`SELECT @@have_dynamic_loading != 'YES'`) {
+  --skip Example plugin requires dynamic loading
+}
 
 #
 # Check if the variable EXAMPLE_PLUGIN is set
 #
---require r/have_example_plugin.require
-disable_query_log;
-eval select LENGTH('$EXAMPLE_PLUGIN') > 0 as 'have_example_plugin';
+if (`SELECT LENGTH('$EXAMPLE_PLUGIN') = 0`) {
+  --skip Example plugin requires the environment variable \$EXAMPLE_PLUGIN to be set (normally done by mtr)
+}
+
+#
+# Check if --plugin-dir was setup for exampledb
+#
+if (`SELECT CONCAT('--plugin-dir=', @@plugin_dir) != '$EXAMPLE_PLUGIN_OPT'`) {
+  --skip Example plugin requires that --plugin-dir is set to the example plugin dir (either the .opt file does not contain \$EXAMPLE_PLUGIN_OPT or another plugin is in use)
+}
 enable_query_log;

mysql-test/include/have_simple_parser.inc

 #
-# Check if server has support for loading udf's
-# i.e it will support dlopen
+# Check if server has support for loading plugins
 #
---require r/have_dynamic_loading.require
-disable_query_log;
-show variables like 'have_dynamic_loading';
-enable_query_log;
+if (`SELECT @@have_dynamic_loading != 'YES'`) {
+  --skip simple parser requires dynamic loading
+}
 
 #
 # Check if the variable SIMPLE_PARSER is set
 #
---require r/have_simple_parser.require
-disable_query_log;
-eval select LENGTH('$SIMPLE_PARSER') > 0 as 'have_simple_parser';
-enable_query_log;
+if (`SELECT LENGTH('$SIMPLE_PARSER') = 0`) {
+  --skip simple parser requires the environment variable \$SIMPLE_PARSER to be set (normally done by mtr)
+}
+
+#
+# Check if --plugin-dir was setup for simple parser
+#
+if (`SELECT CONCAT('--plugin-dir=', @@plugin_dir) != '$SIMPLE_PARSER_OPT'`) {
+  --skip simple parser requires that --plugin-dir is set to the udf plugin dir (either the .opt file does not contain \$UDF_EXAMPLE_LIB_OPT or another plugin is in use)
+}

mysql-test/include/have_udf.inc

 #
-# Check if server has support for loading udf's
-# i.e it will support dlopen
+# Check if server has support for loading plugins
 #
---require r/have_dynamic_loading.require
-disable_query_log;
-show variables like 'have_dynamic_loading';
-enable_query_log;
+if (`SELECT @@have_dynamic_loading != 'YES'`) {
+  --skip UDF requires dynamic loading
+}
 
 #
 # Check if the variable UDF_EXAMPLE_LIB is set
 #
---require r/have_udf_example.require
-disable_query_log;
-eval select LENGTH('$UDF_EXAMPLE_LIB') > 0 as 'have_udf_example_lib';
-enable_query_log;
+if (`SELECT LENGTH('$UDF_EXAMPLE_LIB') = 0`) {
+  --skip UDF requires the environment variable \$UDF_EXAMPLE_LIB to be set (normally done by mtr)
+}
+
+#
+# Check if --plugin-dir was setup for udf
+#
+if (`SELECT CONCAT('--plugin-dir=', @@plugin_dir) != '$UDF_EXAMPLE_LIB_OPT'`) {
+  --skip UDF requires that --plugin-dir is set to the udf plugin dir (either the .opt file does not contain \$UDF_EXAMPLE_LIB_OPT or another plugin is in use)
+}

mysql-test/include/rpl_udf.inc

@@ -55,11 +55,13 @@ connection master;
 --echo "Running on the master"
 --enable_info
 eval CREATE TABLE t1(sum INT, price FLOAT(24)) ENGINE=$engine_type;
+--disable_warnings
 INSERT INTO t1 VALUES(myfunc_int(100), myfunc_double(50.00));
 INSERT INTO t1 VALUES(myfunc_int(10), myfunc_double(5.00));
 INSERT INTO t1 VALUES(myfunc_int(200), myfunc_double(25.00));
 INSERT INTO t1 VALUES(myfunc_int(1), myfunc_double(500.00));
 SELECT * FROM t1 ORDER BY sum;
+--enable_warnings
 --disable_info
 
 sync_slave_with_master;

mysql-test/r/have_dynamic_loading.require

-Variable_name	Value
-have_dynamic_loading	YES

mysql-test/r/have_example_plugin.require

-have_example_plugin
-1

mysql-test/r/have_simple_parser.require

-have_simple_parser
-1

mysql-test/r/have_udf_example.require

-have_udf_example_lib
-1

mysql-test/r/partition_innodb_stmt.result

@@ -42,7 +42,7 @@ id
 SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
 BEGIN;
 INSERT INTO t1 VALUES(9);
-ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-COMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 COMMIT;
 DROP TABLE t1;

mysql-test/r/sp_trans.result

@@ -506,6 +506,8 @@ select count(*)*255 from t3 into table_size;
 until table_size > max_table_size*2 end repeat;
 end|
 call bug14210_fill_table()|
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system variable whose value may differ on slave.
 drop procedure bug14210_fill_table|
 create table t4 like t3|
 create procedure bug14210()

mysql-test/suite/binlog/r/binlog_innodb.result

@@ -14,12 +14,12 @@ SET BINLOG_FORMAT=STATEMENT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
 UPDATE t1 SET b = 1*a WHERE a > 1;
-ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-UNCOMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 UPDATE t1 SET b = 2*a WHERE a > 2;
-ERROR HY000: Binary logging not possible. Message: Transaction level 'READ-COMMITTED' in InnoDB is not safe for binlog mode 'STATEMENT'
+ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;

mysql-test/suite/binlog/r/binlog_multi_engine.result

@@ -42,7 +42,7 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
@@ -68,9 +68,9 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Binary logging not possible. Message: Statement cannot be written atomically since more than one engine involved and at least one engine is self-logging
+ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 mysqld-bin.000001	#	Query	#	#	BEGIN

mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result

@@ -12,7 +12,11 @@ master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (null)
 master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (300)
 master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
 insert delayed into t1 values (null),(null),(400),(null);
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_stm_ps.result

@@ -11,7 +11,7 @@ prepare s from "insert into t1 select 100 limit ?";
 set @a=100;
 execute s using @a;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int)

mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result

@@ -4,10 +4,10 @@ CREATE TABLE t1 (a int, b int, primary key (a));
 INSERT INTO t1 VALUES (1,2), (2,3);
 UPDATE t1 SET b='4' WHERE a=1 LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 UPDATE t1 SET b='5' WHERE a=2 ORDER BY a LIMIT 1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 DROP TABLE t1;
 ### NOT filtered database => assertion: binlog disabled and warnings ARE NOT shown
 SET SQL_LOG_BIN= 0;
@@ -38,11 +38,11 @@ CREATE TABLE t1 (a VARCHAR(36), b VARCHAR(10));
 SET GLOBAL LOG_WARNINGS = 0;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
 SET GLOBAL LOG_WARNINGS = 1;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
 DROP TABLE t1;
 SET GLOBAL log_warnings = @old_log_warnings;
 # Count the number of times the "Unsafe" message was printed

mysql-test/suite/binlog/t/binlog_innodb.test

@@ -27,13 +27,13 @@ SET BINLOG_FORMAT=STATEMENT;
 
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE;
 UPDATE t1 SET b = 1*a WHERE a > 1;
 COMMIT;
 
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_STMT_MODE_AND_ROW_ENGINE;
 UPDATE t1 SET b = 2*a WHERE a > 2;
 COMMIT;
 

mysql-test/suite/binlog/t/binlog_multi_engine.test

@@ -60,7 +60,7 @@ let $wait_binlog_event= COMMIT;
 source include/wait_for_binlog_event.inc;
 
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 # Not possible to test this since NDB writes its own binlog, which
@@ -84,7 +84,7 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 # Not possible to test this since NDB writes its own binlog, which
@@ -93,7 +93,7 @@ UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
 #UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 
-error ER_BINLOG_LOGGING_IMPOSSIBLE;
+error ER_BINLOG_MULTIPLE_ENGINES_AND_SELF_LOGGING_ENGINE;
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
 
 source include/show_binlog_events.inc;

mysql-test/suite/binlog/t/binlog_unsafe-master.opt

+$UDF_EXAMPLE_LIB_OPT

mysql-test/suite/parts/r/rpl_partition.result

@@ -11,6 +11,17 @@ SET SESSION binlog_format = 'ROW';
 select @@global.binlog_format, @@session.binlog_format;
 @@global.binlog_format	ROW
 @@session.binlog_format	ROW
+[on slave]
+set @old_global_binlog_format=  @@global.binlog_format;
+set @old_session_binlog_format=  @@session.binlog_format;
+SET GLOBAL binlog_format = 'ROW';
+SET SESSION binlog_format = 'ROW';
+select @@global.binlog_format, @@session.binlog_format;
+@@global.binlog_format	ROW
+@@session.binlog_format	ROW
+include/stop_slave.inc
+include/start_slave.inc
+[on master]
 DROP TABLE IF EXISTS t1, t2, t3;
 DROP PROCEDURE IF EXISTS p1;
 DROP PROCEDURE IF EXISTS p2;
@@ -189,3 +200,6 @@ DROP TABLE t1, t2, t3;
 DROP PROCEDURE IF EXISTS p1;
 DROP PROCEDURE IF EXISTS p2;
 DROP PROCEDURE IF EXISTS p3;
+[on slave]
+set @@global.binlog_format=  @old_global_binlog_format;
+set @@session.binlog_format=  @old_session_binlog_format;

mysql-test/suite/parts/t/rpl_partition.test

@@ -11,6 +11,19 @@ set @old_session_binlog_format=  @@session.binlog_format;
 SET GLOBAL binlog_format = 'ROW';
 SET SESSION binlog_format = 'ROW';
 select @@global.binlog_format, @@session.binlog_format;
+--echo [on slave]
+connection slave;
+set @old_global_binlog_format=  @@global.binlog_format;
+set @old_session_binlog_format=  @@session.binlog_format;
+SET GLOBAL binlog_format = 'ROW';
+SET SESSION binlog_format = 'ROW';
+select @@global.binlog_format, @@session.binlog_format;
+# restart slave so that slave sql thread's binlog format is re-read
+# from @@global.binlog_format
+--source include/stop_slave.inc
+--source include/start_slave.inc
+--echo [on master]
+connection master;
 
 --disable_warnings
 DROP TABLE IF EXISTS t1, t2, t3;
@@ -158,8 +171,9 @@ DROP TABLE t1, t2, t3;
 DROP PROCEDURE IF EXISTS p1;
 DROP PROCEDURE IF EXISTS p2;
 DROP PROCEDURE IF EXISTS p3;
-save_master_pos;
-connection slave;
-sync_with_master;
+--echo [on slave]
+sync_slave_with_master;
+set @@global.binlog_format=  @old_global_binlog_format;
+set @@session.binlog_format=  @old_session_binlog_format;
 
 # End of 5.1 tests

mysql-test/suite/rpl/r/rpl_events.result

@@ -6,96 +6,6 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 SET @old_event_scheduler = @@global.event_scheduler;
 set global event_scheduler=1;
-set binlog_format=row;
-DROP EVENT IF EXISTS test.justonce;
-drop table if exists t1,t2;
-CREATE TABLE `t1` (
-`id` INT(10) UNSIGNED NOT NULL,
-`c` VARCHAR(50) NOT NULL,
-`ts` TIMESTAMP NOT NULL DEFAULT CURRENT_TIMESTAMP ON UPDATE CURRENT_TIMESTAMP,
-PRIMARY KEY (`id`)
-) ENGINE=MyISAM DEFAULT CHARSET=utf8;
-INSERT INTO t1 (id, c) VALUES (1, 'manually');
-"Creating event test.justonce on the master"
-CREATE EVENT test.justonce ON SCHEDULE EVERY 2 SECOND DO 
-INSERT IGNORE INTO t1 (id, c) VALUES (2, 'from justonce');
-"Checking event is active on master"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'justonce';
-db	name	status	originator
-test	justonce	ENABLED	1
-"Checking event data on the master"
-ONE
-1
-"Checking event data on the slave"
-ZERO
-0
-"Checking event is inactive on slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'justonce';
-db	name	status	originator
-test	justonce	SLAVESIDE_DISABLED	1
-"Dropping event test.slave_once on the slave"
-DROP EVENT IF EXISTS test.slave_once;
-CREATE EVENT test.slave_once ON SCHEDULE EVERY 5 MINUTE STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (3, 'from slave_once');
-"Checking event status on the slave for originator value = slave's server_id"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_once';
-db	name	status	originator
-test	slave_once	ENABLED	2
-"Dropping event test.slave_once on the slave"
-DROP EVENT IF EXISTS test.slave_once;
-"Dropping event test.justonce on the master"
-DROP EVENT IF EXISTS test.justonce;
-"Creating event test.er on the master"
-CREATE EVENT test.er ON SCHEDULE EVERY 3 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er');
-"Checking event status on the master"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	ENABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er')
-"Checking event status on the slave"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	SLAVESIDE_DISABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (4, 'from er')
-"Altering event test.er on the master"
-ALTER EVENT test.er ON SCHEDULE EVERY 5 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er');
-"Checking event status on the master"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	ENABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er')
-"Checking event status on the slave"
-SELECT db, name, status, originator, body FROM mysql.event WHERE db = 'test' AND name = 'er';
-db	name	status	originator	body
-test	er	SLAVESIDE_DISABLED	1	INSERT IGNORE INTO t1(id, c) VALUES (5, 'from alter er')
-"Dropping event test.er on the master"
-DROP EVENT test.er;
-"Checking event status on the master"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test';
-db	name	status	originator
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test';
-db	name	status	originator
-"Creating event test.slave_terminate on the slave"
-CREATE EVENT test.slave_terminate ON SCHEDULE EVERY 3 SECOND STARTS CURRENT_TIMESTAMP + INTERVAL 1 HOUR DO 
-INSERT IGNORE INTO t1(id, c) VALUES (6, 'from slave_terminate');
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_terminate';
-db	name	status	originator
-test	slave_terminate	ENABLED	2
-"Dropping event test.slave_terminate on the slave"
-DROP EVENT test.slave_terminate;
-"Creating event test.slave_terminate with DISABLE ON SLAVE on the slave"
-CREATE EVENT test.slave_terminate ON SCHEDULE EVERY 3 SECOND DISABLE ON SLAVE DO 
-INSERT IGNORE INTO t1(c) VALUES (7, 'from slave_terminate');
-"Checking event status on the slave"
-SELECT db, name, status, originator FROM mysql.event WHERE db = 'test' AND name = 'slave_terminate';
-db	name	status	originator
-test	slave_terminate	SLAVESIDE_DISABLED	2
-"Dropping event test.slave_terminate on the slave"
-DROP EVENT test.slave_terminate;
-"Cleanup"
-DROP TABLE t1;
-set binlog_format=statement;
 DROP EVENT IF EXISTS test.justonce;
 drop table if exists t1,t2;
 CREATE TABLE `t1` (

mysql-test/suite/rpl/r/rpl_foreign_key_innodb.result

@@ -46,7 +46,6 @@ engine = INNODB;
 insert into t1 set b=1;
 insert into t2 set a=1, b=1;
 set foreign_key_checks=0;
-set @@session.binlog_format=row;
 delete from t1;
 must sync w/o a problem (could not with the buggy code)
 select count(*) from t1 /* must be zero */;

mysql-test/suite/rpl/r/rpl_idempotency.result

@@ -6,11 +6,12 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 call mtr.add_suppression("Slave: Can\'t find record in \'t1\' Error_code: 1032");
 call mtr.add_suppression("Slave: Cannot add or update a child row: a foreign key constraint fails .* Error_code: 1452");
-SET @old_slave_exec_mode= @@global.slave_exec_mode;
 CREATE TABLE t1 (a INT PRIMARY KEY);
 CREATE TABLE t2 (a INT);
 INSERT INTO t1 VALUES (-1),(-2),(-3);
 INSERT INTO t2 VALUES (-1),(-2),(-3);
+SET @old_slave_exec_mode= @@global.slave_exec_mode;
+SET @@global.slave_exec_mode= IDEMPOTENT;
 DELETE FROM t1 WHERE a = -2;
 DELETE FROM t2 WHERE a = -2;
 DELETE FROM t1 WHERE a = -2;
@@ -72,158 +73,4 @@ a
 Last_SQL_Error
 0
 DROP TABLE t1, t2;
-select @@global.slave_exec_mode /* must be IDEMPOTENT */;
-@@global.slave_exec_mode
-IDEMPOTENT
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-select * from ti1 order by b /* must be (1),(2),(3) */;
-b
-1
-2
-3
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-a	b
-1	1
-2	2
-set @save_binlog_format= @@session.binlog_format;
-set @@session.binlog_format= row;
-delete from ti1 where b=1;
-select * from ti1 order by b /* must be (2),(3) */;
-b
-2
-3
-select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
-b
-1
-2
-3
-delete from ti1 where b=3;
-insert into ti2 set a=3, b=3;
-select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
-a	b
-1	1
-2	2
-set global slave_exec_mode='IDEMPOTENT';
-set global slave_exec_mode='STRICT';
-set global slave_exec_mode='IDEMPOTENT,STRICT';
-ERROR HY000: Ambiguous slave modes combination. 
-select @@global.slave_exec_mode /* must be STRICT */;
-@@global.slave_exec_mode
-STRICT
-*** foreign keys errors as above now forces to stop
-set foreign_key_checks=0;
-drop table ti2, ti1;
-create table ti1 (b int primary key) engine = innodb;
-create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
-engine = innodb;
-set foreign_key_checks=1 /* ensure the check */;
-insert into ti1 values (1),(2),(3);
-insert into ti2 set a=2, b=2;
-select * from ti1 order by b /* must be (1),(2),(3) */;
-b
-1
-2
-3
-*** conspire future problem
-insert into ti2 set a=1, b=1;
-select * from ti2 order by b /* must be (1,1) (2,2) */;
-a	b
-1	1
-2	2
-delete from ti1 where b=1 /* offending delete event */;
-select * from ti1 order by b /* must be (2),(3) */;
-b
-2
-3
-*** slave must stop (Trying to delete a referenced foreing key)
-Last_SQL_Error
-1451
-select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
-b
-1
-2
-3
-set foreign_key_checks= 0;
-delete from ti2 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-*** conspire the following insert failure
-*** conspire future problem
-delete from ti1 where b=3;
-insert into ti2 set a=3, b=3 /* offending write event */;
-*** slave must stop (Trying to insert an invalid foreign key)
-Last_SQL_Error
-1452
-select * from ti2 order by b /* must be (2,2) */;
-a	b
-2	2
-set foreign_key_checks= 0;
-insert into ti1 set b=3;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-select * from ti2 order by b /* must be (2,2),(3,3) */;
-a	b
-2	2
-3	3
-*** other errors
-*** conspiring query
-insert into ti1 set b=1;
-insert into ti1 set b=1 /* offending write event */;
-*** slave must stop (Trying to insert a dupliacte key)
-Last_SQL_Error
-1062
-set foreign_key_checks= 0;
-delete from ti1 where b=1;
-set foreign_key_checks= 1;
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-CREATE TABLE t1 (a INT PRIMARY KEY);
-CREATE TABLE t2 (a INT);
-INSERT INTO t1 VALUES (-1),(-2),(-3);
-INSERT INTO t2 VALUES (-1),(-2),(-3);
-DELETE FROM t1 WHERE a = -2;
-DELETE FROM t2 WHERE a = -2;
-DELETE FROM t1 WHERE a = -2;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-DELETE FROM t2 WHERE a = -2;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-UPDATE t1 SET a = 1 WHERE a = -1;
-UPDATE t2 SET a = 1 WHERE a = -1;
-UPDATE t1 SET a = 1 WHERE a = -1;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
-set global slave_exec_mode='STRICT';
-UPDATE t2 SET a = 1 WHERE a = -1;
-*** slave must stop (Key was not found)
-Last_SQL_Error
-1032
-set global slave_exec_mode='IDEMPOTENT';
-start slave sql_thread;
 SET @@global.slave_exec_mode= @old_slave_exec_mode;
-set @@session.binlog_format= @save_binlog_format;
-drop table t1,t2,ti2,ti1;
-*** end of tests

mysql-test/suite/rpl/r/rpl_found_rows.result → mysql-test/suite/rpl/r/rpl_mix_found_rows.result

@@ -4,8 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-==== 0. Setting it all up ====
-SET BINLOG_FORMAT=STATEMENT;
+==== Initialize ====
 **** On Master ****
 CREATE TABLE t1 (a INT);
 CREATE TABLE logtbl (sect INT, test INT, count INT);
@@ -16,106 +15,12 @@ INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
-#### 1. Using statement mode ####
-==== 1.1. Simple test ====
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,1,@a);
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-a
-1
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,2,@a);
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-sect	test	count
-1	1	183
-1	2	3
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-sect	test	count
-1	1	183
-1	2	3
-==== 1.2. Stored procedure ====
-**** On Master ****
-CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
-DECLARE cnt INT;
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO cnt;
-INSERT INTO logtbl VALUES(sect,test,cnt);
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO cnt;
-INSERT INTO logtbl VALUES(sect,test+1,cnt);
-END $$
-CALL calc_and_log(2,1);
-a
-1
-a
-7
-CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
-INSERT INTO logtbl VALUES (sect,test,found_rows);
-END $$
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @found_rows;
-CALL just_log(2,3,@found_rows);
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-sect	test	count
-2	1	3
-2	2	183
-2	3	183
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-sect	test	count
-2	1	3
-2	2	183
-2	3	183
-==== 1.3. Stored functions ====
-**** On Master ****
-CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
-RETURNS INT
-BEGIN
-INSERT INTO logtbl VALUES(sect,test,found_rows);
-RETURN found_rows;
-END $$
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-a
-7
-SELECT FOUND_ROWS() INTO @found_rows;
-SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
-log_rows(3,1,@found_rows)	log_rows(3,2,@found_rows)
-183	183
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-sect	test	count
-3	1	183
-3	2	183
-**** On Slave ****
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-sect	test	count
-3	1	183
-3	2	183
-==== 1.9. Cleanup ====
-**** On Master ****
-DELETE FROM logtbl;
-DROP PROCEDURE just_log;
-DROP PROCEDURE calc_and_log;
-DROP FUNCTION log_rows;
-**** Resetting master and slave ****
-include/stop_slave.inc
-RESET SLAVE;
-RESET MASTER;
-include/start_slave.inc
-#### 2. Using mixed mode ####
-==== 2.1. Checking a procedure ====
+==== Checking a procedure ====
 **** On Master ****
-SET BINLOG_FORMAT=MIXED;
 CREATE PROCEDURE just_log(sect INT, test INT) BEGIN
 INSERT INTO logtbl VALUES (sect,test,FOUND_ROWS());
 END $$
 **** On Master 1 ****
-SET BINLOG_FORMAT=MIXED;
 SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
 a
 7
@@ -148,7 +53,7 @@ sect	test	count
 1	2	183
 1	3	3
 1	4	183
-==== 2.1. Checking a stored function ====
+==== Checking a stored function ====
 **** On Master ****
 CREATE FUNCTION log_rows(sect INT, test INT)
 RETURNS INT

mysql-test/suite/rpl/r/rpl_mix_insert_delayed.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+CREATE SCHEMA IF NOT EXISTS mysqlslap;
+USE mysqlslap;
+select @@global.binlog_format;
+@@global.binlog_format
+MIXED
+CREATE TABLE t1 (id INT primary key auto_increment, name VARCHAR(64));
+FLUSH TABLE t1;
+SELECT COUNT(*) FROM t1;
+COUNT(*)
+5000
+use mysqlslap;
+SELECT COUNT(*) FROM t1;
+COUNT(*)
+5000
+truncate table t1;
+insert delayed into t1 values(10, "my name");
+insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
+flush table t1;
+select * from t1;
+id	name
+10	my name
+20	James Bond
+select * from t1;
+id	name
+10	my name
+20	James Bond
+delete from t1 where id!=10;
+insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
+flush table t1;
+select * from t1;
+id	name
+10	my name
+20	is Bond
+select * from t1;
+id	name
+10	my name
+20	is Bond
+USE test;
+DROP SCHEMA mysqlslap;
+use test;
+FLUSH LOGS;
+FLUSH LOGS;
+CREATE TABLE t1(a int, UNIQUE(a));
+INSERT DELAYED IGNORE INTO t1 VALUES(1);
+INSERT DELAYED IGNORE INTO t1 VALUES(1);
+flush table t1;
+show binlog events in 'master-bin.000002' LIMIT 2,2;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+x	x	x	x	x	BEGIN
+x	x	x	x	x	table_id: # (test.t1)
+select * from t1;
+a
+1
+On slave
+show binlog events in 'slave-bin.000002' LIMIT 2,2;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+x	x	x	x	x	BEGIN
+x	x	x	x	x	table_id: # (test.t1)
+select * from t1;
+a
+1
+drop table t1;
+FLUSH LOGS;
+FLUSH LOGS;
+End of 5.0 tests

mysql-test/suite/rpl/r/rpl_rbr_to_sbr.result

@@ -4,12 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-SET @old_binlog_format= @@global.binlog_format;
-SET BINLOG_FORMAT=MIXED;
-SET GLOBAL BINLOG_FORMAT=MIXED;
-SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
-@@GLOBAL.BINLOG_FORMAT	@@SESSION.BINLOG_FORMAT
-MIXED	MIXED
 **** On Master ****
 CREATE TABLE t1 (a INT, b LONG);
 INSERT INTO t1 VALUES (1,1), (2,2);
@@ -73,4 +67,3 @@ slave-bin.000001	#	Table_map	1	#	table_id: # (test.t1)
 slave-bin.000001	#	Write_rows	1	#	table_id: # flags: STMT_END_F
 slave-bin.000001	#	Query	1	#	COMMIT
 DROP TABLE IF EXISTS t1;
-SET @@global.binlog_format= @old_binlog_format;

mysql-test/suite/rpl/r/rpl_row_idempotency.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+set @old_slave_exec_mode= @@global.slave_exec_mode;
+set @@global.slave_exec_mode= IDEMPOTENT;
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+b
+1
+2
+3
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+a	b
+1	1
+2	2
+set @save_binlog_format= @@session.binlog_format;
+set @@session.binlog_format= row;
+delete from ti1 where b=1;
+select * from ti1 order by b /* must be (2),(3) */;
+b
+2
+3
+select * from ti1 order by b /* must stays as were on master (1),(2),(3) */;
+b
+1
+2
+3
+delete from ti1 where b=3;
+insert into ti2 set a=3, b=3;
+select * from ti2 order by b /* must be (1,1),(2,2) - not inserted */;
+a	b
+1	1
+2	2
+set global slave_exec_mode='IDEMPOTENT';
+set global slave_exec_mode='STRICT';
+set global slave_exec_mode='IDEMPOTENT,STRICT';
+ERROR HY000: Ambiguous slave modes combination. 
+select @@global.slave_exec_mode /* must be STRICT */;
+@@global.slave_exec_mode
+STRICT
+*** foreign keys errors as above now forces to stop
+set foreign_key_checks=0;
+drop table ti2, ti1;
+create table ti1 (b int primary key) engine = innodb;
+create table ti2 (a int primary key, b int, foreign key (b) references ti1(b))
+engine = innodb;
+set foreign_key_checks=1 /* ensure the check */;
+insert into ti1 values (1),(2),(3);
+insert into ti2 set a=2, b=2;
+select * from ti1 order by b /* must be (1),(2),(3) */;
+b
+1
+2
+3
+*** conspire future problem
+insert into ti2 set a=1, b=1;
+select * from ti2 order by b /* must be (1,1) (2,2) */;
+a	b
+1	1
+2	2
+delete from ti1 where b=1 /* offending delete event */;
+select * from ti1 order by b /* must be (2),(3) */;
+b
+2
+3
+*** slave must stop (Trying to delete a referenced foreing key)
+Last_SQL_Error
+1451
+select * from ti1 order by b /* must be (1),(2),(3) - not deleted */;
+b
+1
+2
+3
+set foreign_key_checks= 0;
+delete from ti2 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+*** conspire the following insert failure
+*** conspire future problem
+delete from ti1 where b=3;
+insert into ti2 set a=3, b=3 /* offending write event */;
+*** slave must stop (Trying to insert an invalid foreign key)
+Last_SQL_Error
+1452
+select * from ti2 order by b /* must be (2,2) */;
+a	b
+2	2
+set foreign_key_checks= 0;
+insert into ti1 set b=3;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+select * from ti2 order by b /* must be (2,2),(3,3) */;
+a	b
+2	2
+3	3
+*** other errors
+*** conspiring query
+insert into ti1 set b=1;
+insert into ti1 set b=1 /* offending write event */;
+*** slave must stop (Trying to insert a dupliacte key)
+Last_SQL_Error
+1062
+set foreign_key_checks= 0;
+delete from ti1 where b=1;
+set foreign_key_checks= 1;
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+CREATE TABLE t1 (a INT PRIMARY KEY);
+CREATE TABLE t2 (a INT);
+INSERT INTO t1 VALUES (-1),(-2),(-3);
+INSERT INTO t2 VALUES (-1),(-2),(-3);
+DELETE FROM t1 WHERE a = -2;
+DELETE FROM t2 WHERE a = -2;
+DELETE FROM t1 WHERE a = -2;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+DELETE FROM t2 WHERE a = -2;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+UPDATE t1 SET a = 1 WHERE a = -1;
+UPDATE t2 SET a = 1 WHERE a = -1;
+UPDATE t1 SET a = 1 WHERE a = -1;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+set global slave_exec_mode='STRICT';
+UPDATE t2 SET a = 1 WHERE a = -1;
+*** slave must stop (Key was not found)
+Last_SQL_Error
+1032
+set global slave_exec_mode='IDEMPOTENT';
+start slave sql_thread;
+SET @@global.slave_exec_mode= @old_slave_exec_mode;
+drop table t1,t2,ti2,ti1;
+set @@global.slave_exec_mode= @old_slave_exec_mode;
+*** end of tests

mysql-test/suite/rpl/r/rpl_row_insert_delayed.result

@@ -4,8 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set @old_global_binlog_format = @@global.binlog_format;
-set @@global.binlog_format = row;
 CREATE SCHEMA IF NOT EXISTS mysqlslap;
 USE mysqlslap;
 select @@global.binlog_format;
@@ -59,4 +57,3 @@ a
 1
 drop table t1;
 End of 5.0 tests
-set @@global.binlog_format = @old_global_binlog_format;

mysql-test/suite/rpl/r/rpl_stm_found_rows.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+==== Initialize ====
+**** On Master ****
+CREATE TABLE t1 (a INT);
+CREATE TABLE logtbl (sect INT, test INT, count INT);
+INSERT INTO t1 VALUES (1),(2),(3);
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+INSERT INTO t1 SELECT 2*a+3 FROM t1;
+==== Simple test ====
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,1,@a);
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+a
+1
+SELECT FOUND_ROWS() INTO @a;
+INSERT INTO logtbl VALUES(1,2,@a);
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+sect	test	count
+1	1	183
+1	2	3
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
+sect	test	count
+1	1	183
+1	2	3
+==== Stored procedure ====
+**** On Master ****
+CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
+DECLARE cnt INT;
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO cnt;
+INSERT INTO logtbl VALUES(sect,test,cnt);
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+SELECT FOUND_ROWS() INTO cnt;
+INSERT INTO logtbl VALUES(sect,test+1,cnt);
+END $$
+CALL calc_and_log(2,1);
+a
+1
+a
+7
+Warnings:
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
+INSERT INTO logtbl VALUES (sect,test,found_rows);
+END $$
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @found_rows;
+CALL just_log(2,3,@found_rows);
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+sect	test	count
+2	1	3
+2	2	183
+2	3	183
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
+sect	test	count
+2	1	3
+2	2	183
+2	3	183
+==== Stored functions ====
+**** On Master ****
+CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
+RETURNS INT
+BEGIN
+INSERT INTO logtbl VALUES(sect,test,found_rows);
+RETURN found_rows;
+END $$
+SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
+a
+7
+SELECT FOUND_ROWS() INTO @found_rows;
+SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
+log_rows(3,1,@found_rows)	log_rows(3,2,@found_rows)
+183	183
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+sect	test	count
+3	1	183
+3	2	183
+**** On Slave ****
+SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
+sect	test	count
+3	1	183
+3	2	183
+==== Cleanup ====
+**** On Master ****
+DROP TABLE t1, logtbl;
+DROP PROCEDURE just_log;
+DROP PROCEDURE calc_and_log;
+DROP FUNCTION log_rows;
+**** Resetting master and slave ****
+include/stop_slave.inc
+RESET SLAVE;
+RESET MASTER;
+include/start_slave.inc

mysql-test/suite/rpl/r/rpl_stm_insert_delayed.result

@@ -4,8 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set @old_global_binlog_format = @@global.binlog_format;
-set @@global.binlog_format = statement;
 CREATE SCHEMA IF NOT EXISTS mysqlslap;
 USE mysqlslap;
 select @@global.binlog_format;
@@ -71,70 +69,3 @@ drop table t1;
 FLUSH LOGS;
 FLUSH LOGS;
 End of 5.0 tests
-set @@global.binlog_format = mixed;
-CREATE SCHEMA IF NOT EXISTS mysqlslap;
-USE mysqlslap;
-select @@global.binlog_format;
-@@global.binlog_format
-MIXED
-CREATE TABLE t1 (id INT primary key auto_increment, name VARCHAR(64));
-FLUSH TABLE t1;
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-5000
-use mysqlslap;
-SELECT COUNT(*) FROM t1;
-COUNT(*)
-5000
-truncate table t1;
-insert delayed into t1 values(10, "my name");
-insert delayed into t1 values(10, "is Bond"), (20, "James Bond");
-flush table t1;
-select * from t1;
-id	name
-10	my name
-20	James Bond
-select * from t1;
-id	name
-10	my name
-20	James Bond
-delete from t1 where id!=10;
-insert delayed into t1 values(20, "is Bond"), (10, "James Bond");
-flush table t1;
-select * from t1;
-id	name
-10	my name
-20	is Bond
-select * from t1;
-id	name
-10	my name
-20	is Bond
-USE test;
-DROP SCHEMA mysqlslap;
-use test;
-FLUSH LOGS;
-FLUSH LOGS;
-CREATE TABLE t1(a int, UNIQUE(a));
-INSERT DELAYED IGNORE INTO t1 VALUES(1);
-INSERT DELAYED IGNORE INTO t1 VALUES(1);
-flush table t1;
-show binlog events in 'master-bin.000002' LIMIT 2,2;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-select * from t1;
-a
-1
-On slave
-show binlog events in 'slave-bin.000002' LIMIT 2,2;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-x	x	x	x	x	use `test`; INSERT DELAYED IGNORE INTO t1 VALUES(1)
-select * from t1;
-a
-1
-drop table t1;
-FLUSH LOGS;
-FLUSH LOGS;
-End of 5.0 tests
-set @@global.binlog_format = @old_global_binlog_format;

mysql-test/suite/rpl/r/rpl_stm_loadfile.result

@@ -10,7 +10,7 @@ CREATE TABLE test.t1 (a INT, blob_column LONGBLOB, PRIMARY KEY(a));
 INSERT INTO test.t1  VALUES(1,'test');
 UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=1;
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
 create procedure test.p1()
 begin
 INSERT INTO test.t1  VALUES(2,'test');
@@ -18,7 +18,7 @@ UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=2;
 end|
 CALL test.p1();
 Warnings:
-Note	1592	Statement may not be safe to log in statement format.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
 SELECT * FROM test.t1 ORDER BY blob_column;
 a	blob_column
 1	abase

mysql-test/suite/rpl/r/rpl_temporary_errors.result

@@ -6,7 +6,6 @@ drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 call mtr.add_suppression("Deadlock found");
 **** On Master ****
-SET SESSION BINLOG_FORMAT=ROW;
 CREATE TABLE t1 (a INT PRIMARY KEY, b INT);
 INSERT INTO t1 VALUES (1,1), (2,2), (3,3), (4,4);
 **** On Slave ****

mysql-test/suite/rpl/r/rpl_udf.result

@@ -4,7 +4,6 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-set binlog_format=row;
 drop table if exists t1;
 "*** Test 1) Test UDFs via loadable libraries ***
 "Running on the master"
@@ -156,163 +155,3 @@ affected rows: 0
 "Running on the master"
 DROP TABLE t1;
 affected rows: 0
-set binlog_format=statement;
-drop table if exists t1;
-"*** Test 1) Test UDFs via loadable libraries ***
-"Running on the master"
-CREATE FUNCTION myfunc_double RETURNS REAL SONAME "UDF_EXAMPLE_LIB";
-affected rows: 0
-CREATE FUNCTION myfunc_int RETURNS INTEGER SONAME "UDF_EXAMPLE_LIB";
-affected rows: 0
-CREATE FUNCTION myfunc_nonexist RETURNS INTEGER SONAME "UDF_EXAMPLE_LIB";
-ERROR HY000: Can't find symbol 'myfunc_nonexist' in library
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-myfunc_double	1	UDF_LIB	function
-myfunc_int	2	UDF_LIB	function
-affected rows: 2
-"Running on the slave"
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-myfunc_double	1	UDF_LIB	function
-myfunc_int	2	UDF_LIB	function
-affected rows: 2
-"Running on the master"
-CREATE TABLE t1(sum INT, price FLOAT(24)) ENGINE=MyISAM;
-affected rows: 0
-INSERT INTO t1 VALUES(myfunc_int(100), myfunc_double(50.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(10), myfunc_double(5.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(200), myfunc_double(25.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-INSERT INTO t1 VALUES(myfunc_int(1), myfunc_double(500.00));
-Warnings:
-Note	1592	Statement may not be safe to log in statement format.
-affected rows: 1
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	48.5
-10	48.75
-100	48.6
-200	49
-affected rows: 4
-"Running on the slave"
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	48.5
-10	48.75
-100	48.6
-200	49
-affected rows: 4
-SELECT myfunc_int(25);
-myfunc_int(25)
-25
-affected rows: 1
-SELECT myfunc_double(75.00);
-myfunc_double(75.00)
-50.00
-affected rows: 1
-"Running on the master"
-DROP FUNCTION myfunc_double;
-affected rows: 0
-DROP FUNCTION myfunc_int;
-affected rows: 0
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-affected rows: 0
-"Running on the slave"
-SELECT * FROM mysql.func ORDER BY name;
-name	ret	dl	type
-affected rows: 0
-"Running on the master"
-DROP TABLE t1;
-affected rows: 0
-"*** Test 2) Test UDFs with SQL body ***
-"Running on the master"
-CREATE FUNCTION myfuncsql_int(i INT) RETURNS INTEGER DETERMINISTIC RETURN i;
-affected rows: 0
-CREATE FUNCTION myfuncsql_double(d DOUBLE) RETURNS INTEGER DETERMINISTIC RETURN d * 2.00;
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	
-affected rows: 2
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	
-affected rows: 2
-"Running on the master"
-CREATE TABLE t1(sum INT, price FLOAT(24)) ENGINE=MyISAM;
-affected rows: 0
-INSERT INTO t1 VALUES(myfuncsql_int(100), myfuncsql_double(50.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(10), myfuncsql_double(5.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(200), myfuncsql_double(25.00));
-affected rows: 1
-INSERT INTO t1 VALUES(myfuncsql_int(1), myfuncsql_double(500.00));
-affected rows: 1
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	1000
-10	10
-100	100
-200	50
-affected rows: 4
-"Running on the slave"
-SELECT * FROM t1 ORDER BY sum;
-sum	price
-1	1000
-10	10
-100	100
-200	50
-affected rows: 4
-"Running on the master"
-ALTER FUNCTION myfuncsql_int COMMENT "This was altered.";
-affected rows: 0
-ALTER FUNCTION myfuncsql_double COMMENT "This was altered.";
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	This was altered.
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	This was altered.
-affected rows: 2
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-test	myfuncsql_double	FUNCTION	d DOUBLE	RETURN d * 2.00	This was altered.
-test	myfuncsql_int	FUNCTION	i INT	RETURN i	This was altered.
-affected rows: 2
-SELECT myfuncsql_int(25);
-myfuncsql_int(25)
-25
-affected rows: 1
-SELECT myfuncsql_double(75.00);
-myfuncsql_double(75.00)
-150
-affected rows: 1
-"Running on the master"
-DROP FUNCTION myfuncsql_double;
-affected rows: 0
-DROP FUNCTION myfuncsql_int;
-affected rows: 0
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-affected rows: 0
-"Running on the slave"
-SELECT db, name, type,  param_list, body, comment FROM mysql.proc WHERE db = 'test' AND name LIKE 'myfuncsql%' ORDER BY name;
-db	name	type	param_list	body	comment
-affected rows: 0
-"Running on the master"
-DROP TABLE t1;
-affected rows: 0

mysql-test/suite/rpl/t/rpl_bug31076.test

+source include/have_binlog_format_mixed_or_row.inc;
 source include/master-slave.inc;
 
 CREATE DATABASE track;

mysql-test/suite/rpl/t/rpl_events.test

 ##################################################################
 # Author: Giuseppe                                               #
 # Date: 2006-12-20                                               #
-# Purpose: To test that event effects are replicated             #
-# in both row based and statement based format                   #
+# Purpose: To test that event effects are replicated.            #
 ##################################################################
 
---source include/not_embedded.inc
 --source include/master-slave.inc
 
 SET @old_event_scheduler = @@global.event_scheduler;
@@ -13,14 +11,6 @@ set global event_scheduler=1;
 
 let $engine_type= MyISAM;
 
-set binlog_format=row;
-
-# Embedded server doesn't support binlogging
---source include/rpl_events.inc
-
-set binlog_format=statement;
-
-# Embedded server doesn't support binlogging
 --source include/rpl_events.inc
 
 #

mysql-test/suite/rpl/t/rpl_extraColmaster_innodb.test

 #############################################################
 # Purpose: To test having extra columns on the master WL#3915
 #############################################################
+-- source include/have_binlog_format_row.inc
 -- source include/master-slave.inc
 -- source include/have_innodb.inc
 
 let $engine_type = 'InnoDB';
-
-set binlog_format=row;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=statement;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=mixed;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
+--source extra/rpl_tests/rpl_extraMaster_Col.test

mysql-test/suite/rpl/t/rpl_extraColmaster_myisam.test

 #############################################################
 # Purpose: To test having extra columns on the master WL#3915
 #############################################################
+-- source include/have_binlog_format_row.inc
 -- source include/master-slave.inc
 
 let $engine_type = 'MyISAM';
-
-set binlog_format=row;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=statement;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
-
-set binlog_format=mixed;
--- source extra/rpl_tests/rpl_extraMaster_Col.test
+--source extra/rpl_tests/rpl_extraMaster_Col.test

mysql-test/suite/rpl/t/rpl_idempotency-slave.opt

---slave-exec-mode=IDEMPOTENT

mysql-test/suite/rpl/t/rpl_found_rows.test → mysql-test/suite/rpl/t/rpl_mix_found_rows.test

 source include/master-slave.inc;
+source include/have_binlog_format_mixed.inc;
 
 # It is not possible to replicate FOUND_ROWS() using statement-based
 # replication, but there is a workaround that stores the result of
 # FOUND_ROWS() into a user variable and then replicates this instead.
+#
+# The purpose of this test case is to test that the workaround works
+# properly even when inside stored programs (i.e., stored routines and
+# triggers).
 
-# The purpose of this test case is to test that the workaround
-# function properly even when inside stored programs (i.e., stored
-# routines and triggers).
-
---echo ==== 0. Setting it all up ====
-
-SET BINLOG_FORMAT=STATEMENT;
+--echo ==== Initialize ====
 
 --echo **** On Master ****
 connection master;
@@ -25,106 +24,10 @@ INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 INSERT INTO t1 SELECT 2*a+3 FROM t1;
 
---echo #### 1. Using statement mode ####
-
---echo ==== 1.1. Simple test ====
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-
-# Instead of
-#   INSERT INTO logtbl VALUES(1, 1, FOUND_ROWS());
-# we write
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,1,@a);
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-# Instead of
-#   INSERT INTO logtbl VALUES(1, 2, FOUND_ROWS());
-# we write
-SELECT FOUND_ROWS() INTO @a;
-INSERT INTO logtbl VALUES(1,2,@a);
-
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
-
---echo ==== 1.2. Stored procedure ====
-
-# Here we do both the calculation and the logging. We also do it twice
-# to make sure that there are no limitations on how many times it can
-# be used.
-
---echo **** On Master ****
-connection master;
---delimiter $$
-CREATE PROCEDURE calc_and_log(sect INT, test INT) BEGIN
-  DECLARE cnt INT;
-  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a < 5 ORDER BY a LIMIT 1;
-  SELECT FOUND_ROWS() INTO cnt;
-  INSERT INTO logtbl VALUES(sect,test,cnt);
-  SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-  SELECT FOUND_ROWS() INTO cnt;
-  INSERT INTO logtbl VALUES(sect,test+1,cnt);
-END $$
---delimiter ;
-
-CALL calc_and_log(2,1);
-
---delimiter $$
-CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
-  INSERT INTO logtbl VALUES (sect,test,found_rows);
-END $$
---delimiter ;
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO @found_rows;
-CALL just_log(2,3,@found_rows);
-
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 2 ORDER BY sect,test;
-
---echo ==== 1.3. Stored functions ====
---echo **** On Master ****
-connection master;
---delimiter $$
-CREATE FUNCTION log_rows(sect INT, test INT, found_rows INT)
-  RETURNS INT
-BEGIN
-  INSERT INTO logtbl VALUES(sect,test,found_rows);
-  RETURN found_rows;
-END $$
---delimiter ;
-
-SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
-SELECT FOUND_ROWS() INTO @found_rows;
-SELECT log_rows(3,1,@found_rows), log_rows(3,2,@found_rows);
-
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
---echo **** On Slave ****
-sync_slave_with_master;
-SELECT * FROM logtbl WHERE sect = 3 ORDER BY sect,test;
-
---echo ==== 1.9. Cleanup ====
---echo **** On Master ****
-connection master;
-DELETE FROM logtbl;
-DROP PROCEDURE just_log;
-DROP PROCEDURE calc_and_log;
-DROP FUNCTION log_rows;
-sync_slave_with_master;
-
-source include/reset_master_and_slave.inc;
-
---echo #### 2. Using mixed mode ####
-
---echo ==== 2.1. Checking a procedure ====
+--echo ==== Checking a procedure ====
 
 --echo **** On Master ****
 connection master;
-SET BINLOG_FORMAT=MIXED;
 
 # We will now check some stuff that will not work in statement-based
 # replication, but which should cause the binary log to switch to
@@ -139,7 +42,6 @@ sync_slave_with_master;
 
 --echo **** On Master 1 ****
 connection master1;
-SET BINLOG_FORMAT=MIXED;
 SELECT SQL_CALC_FOUND_ROWS * FROM t1 WHERE a > 5 ORDER BY a LIMIT 1;
 CALL just_log(1,1);
 
@@ -167,7 +69,7 @@ SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
 sync_slave_with_master;
 SELECT * FROM logtbl WHERE sect = 1 ORDER BY sect,test;
 
---echo ==== 2.1. Checking a stored function ====
+--echo ==== Checking a stored function ====
 --echo **** On Master ****
 connection master;
 --delimiter $$

mysql-test/suite/rpl/t/rpl_mix_insert_delayed.test

+--source include/have_binlog_format_mixed.inc
+--source include/master-slave.inc
+--source include/not_embedded.inc
+--source include/not_windows.inc
+--source extra/rpl_tests/rpl_insert_delayed.test

mysql-test/suite/rpl/t/rpl_rbr_to_sbr.test

--- source include/have_binlog_format_mixed_or_statement.inc
+-- source include/have_binlog_format_mixed.inc
 -- source include/not_ndb_default.inc
 -- source include/master-slave.inc
 
-# Test that the slave temporarily switches to ROW when seeing binrow
-# events when it is in STATEMENT or MIXED mode
-
-SET @old_binlog_format= @@global.binlog_format;
-
-SET BINLOG_FORMAT=MIXED;
-SET GLOBAL BINLOG_FORMAT=MIXED;
-SELECT @@GLOBAL.BINLOG_FORMAT, @@SESSION.BINLOG_FORMAT;
+# Test that the slave temporarily switches to ROW when seeing row
+# events when it is in MIXED mode
 
 --echo **** On Master ****
 CREATE TABLE t1 (a INT, b LONG);
@@ -35,7 +29,6 @@ SHOW BINLOG EVENTS;
 
 connection master;
 DROP TABLE IF EXISTS t1;
-SET @@global.binlog_format= @old_binlog_format;
 
 # Let's compare. Note: If they match test will pass, if they do not match
 # the test will show that the diff statement failed and not reject file

mysql-test/suite/rpl/t/rpl_row_insert_delayed.test

@@ -2,13 +2,4 @@
 --source include/master-slave.inc
 --source include/not_embedded.inc
 --source include/not_windows.inc
-
-connection master;
-set @old_global_binlog_format = @@global.binlog_format;
-
-let $binlog_format_statement=0;
-set @@global.binlog_format = row;
 --source extra/rpl_tests/rpl_insert_delayed.test
-
-connection master;
-set @@global.binlog_format = @old_global_binlog_format;

mysql-test/suite/rpl/t/rpl_slave_skip.test

+# Every statement in this test is either executing under ROW or
+# STATEMENT format, which requires the slave thread to be able to apply
+# both statement and row events. Hence, we only need to execute this
+# test for MIXED mode.
+source include/have_binlog_format_mixed.inc;
+
 source include/master-slave.inc;
 source include/have_innodb.inc;
 

mysql-test/suite/rpl_ndb/r/rpl_ndb_circular_simplex.result

@@ -102,3 +102,4 @@ Last_IO_Errno	#
 Last_IO_Error	#
 Last_SQL_Errno	0
 Last_SQL_Error	
+DROP TABLE t1;

mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-master.opt

+--innodb $EXAMPLE_PLUGIN_OPT --binlog-ignore-db=other

mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors-slave.opt

+--innodb $EXAMPLE_PLUGIN_OPT