bug#54935

applying bundle made for next-mr-bugfixing to trunk-bugfixing branch of the bug

mysql-test/extra/binlog_tests/binlog.test

@@ -249,14 +249,17 @@ reset master;
 drop table if exists t3;
 --enable_warnings
 create table t3 (a int(11) NOT NULL AUTO_INCREMENT, b text, PRIMARY KEY (a) ) engine=innodb;
-show master status;
+--let $binlog_file1= query_get_value(SHOW MASTER STATUS, File, 1)
+--echo File $binlog_file1
 let $it=4;
 while ($it)
 {
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 dec $it;
 }
-show master status /* must show new binlog index after rotating */;
+--let $binlog_file2= query_get_value(SHOW MASTER STATUS, File, 1)
+--echo *** show new binlog index after rotating ***
+--echo File $binlog_file2
 drop table t3;
 
 --echo #

mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test

@@ -320,6 +320,12 @@ disconnect con3;
 
 connection con4;
 select get_lock("a",10); # wait for rollback to finish
+if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
+{
+ --let $wait_binlog_event= ROLLBACK
+ --source include/wait_for_binlog_event.inc
+ --let $binlog_rollback= query_get_value(SHOW BINLOG EVENTS, Pos, 7)
+}
 flush logs;
 
 let $MYSQLD_DATADIR= `select @@datadir`;
@@ -328,13 +334,12 @@ let $MYSQLD_DATADIR= `select @@datadir`;
 # and does not make slave to stop)
 if (`select @@binlog_format = 'ROW'`)
 {
-  --echo This does not matter in ROW mode as the rolled back changes do not contain transactional changes as these 
-  --echo were previously flushed upon committing/rolling back each statement.
+  --echo There is nothing to roll back; transactional changes are removed from the trans cache.
 }
 
 if (`select @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
 {
-  --exec $MYSQL_BINLOG --start-position=556 $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mix_innodb_myisam_binlog.output
+  --exec $MYSQL_BINLOG --start-position=$binlog_rollback $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/mix_innodb_myisam_binlog.output
 
   --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
   eval select

mysql-test/extra/rpl_tests/rpl_conflicts.test

@@ -92,7 +92,10 @@ if (`SELECT @@global.binlog_format != 'ROW' OR @@global.slave_exec_mode = 'STRIC
   let $slave_sql_errno= 1062; # ER_DUP_ENTRY
   source include/wait_for_slave_sql_error.inc;
   let $err= query_get_value("SHOW SLAVE STATUS", Last_SQL_Error, 1);
-  --echo Last_SQL_Error = $err (expected "duplicate key" error)
+  --replace_regex /end_log_pos [0-9]+/end_log_pos END_LOG_POS/
+  --disable_query_log
+  --eval SELECT "$err" as 'Last_SQL_Error (expected "duplicate key" error)'
+  --enable_query_log
   SELECT * FROM t1;
 
   --echo ---- Resolve the conflict on the slave and restart SQL thread ----

mysql-test/r/rpl_mysqldump_slave.result

@@ -8,10 +8,10 @@ start slave;
 # New --dump-slave, --apply-slave-statements functionality
 #
 use test;
-CHANGE MASTER TO MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=107;
+CHANGE MASTER TO MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=BINLOG_START;
 STOP SLAVE;
-CHANGE MASTER TO MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=107;
+CHANGE MASTER TO MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=BINLOG_START;
 START SLAVE;
 STOP SLAVE;
-CHANGE MASTER TO MASTER_HOST='127.0.0.1', MASTER_PORT='MASTER_MYPORT', MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=107;
+CHANGE MASTER TO MASTER_HOST='127.0.0.1', MASTER_PORT='MASTER_MYPORT', MASTER_LOG_FILE='master-bin.000001', MASTER_LOG_POS=BINLOG_START;
 START SLAVE;

mysql-test/suite/binlog/r/binlog_row_binlog.result

@@ -1289,16 +1289,13 @@ drop table t1;
 reset master;
 drop table if exists t3;
 create table t3 (a int(11) NOT NULL AUTO_INCREMENT, b text, PRIMARY KEY (a) ) engine=innodb;
-show master status;
-File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	347		
+File master-bin.000001
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
-show master status /* must show new binlog index after rotating */;
-File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000002	107		
+*** show new binlog index after rotating ***
+File master-bin.000002
 drop table t3;
 #
 # Bug #45998: database crashes when running "create as select"

mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result

@@ -434,8 +434,7 @@ select get_lock("a",10);
 get_lock("a",10)
 1
 flush logs;
-This does not matter in ROW mode as the rolled back changes do not contain transactional changes as these 
-were previously flushed upon committing/rolling back each statement.
+There is nothing to roll back; transactional changes are removed from the trans cache.
 drop table t1, t2;
 create temporary table tt (a int unique);
 create table ti (a int) engine=innodb;

mysql-test/suite/binlog/r/binlog_stm_binlog.result

@@ -778,16 +778,13 @@ drop table t1;
 reset master;
 drop table if exists t3;
 create table t3 (a int(11) NOT NULL AUTO_INCREMENT, b text, PRIMARY KEY (a) ) engine=innodb;
-show master status;
-File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000001	347		
+File master-bin.000001
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
 insert into t3(b) values ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa');
-show master status /* must show new binlog index after rotating */;
-File	Position	Binlog_Do_DB	Binlog_Ignore_DB
-master-bin.000002	107		
+*** show new binlog index after rotating ***
+File master-bin.000002
 drop table t3;
 #
 # Bug #45998: database crashes when running "create as select"

mysql-test/suite/binlog/t/binlog_killed_simulate.test

@@ -24,7 +24,8 @@ update t1 set a=2 /* will be "killed" after work has been done */;
 #      for some constants like the offset of the first real event
 #      that is different between severs versions.
 let $MYSQLD_DATADIR= `select @@datadir`;
---exec $MYSQL_BINLOG --force-if-open --start-position=107 $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog
+--let $binlog_start_point= query_get_value(SHOW BINLOG EVENTS LIMIT 1, End_log_pos, 1)
+--exec $MYSQL_BINLOG --force-if-open --start-position=$binlog_start_point $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 eval select
 (@a:=load_file("$MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog"))
@@ -49,10 +50,13 @@ load data infile '../../std_data/rpl_loaddata.dat' into table t2 /* will be "kil
 
 
 # a proof the query is binlogged with an error
-
+--let $binlog_load_data= query_get_value(SHOW BINLOG EVENTS, Pos, 3)
+--let $binlog_end=       query_get_value(SHOW BINLOG EVENTS, Pos, 4)
 source include/show_binlog_events.inc;
 
---exec $MYSQL_BINLOG --force-if-open --start-position=210 --stop-position=387 $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog
+--exec $MYSQL_BINLOG --force-if-open --start-position=$binlog_load_data --stop-position=$binlog_end $MYSQLD_DATADIR/master-bin.000001 > $MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog
+
+
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 eval select
 (@a:=load_file("$MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog"))

mysql-test/suite/rpl/r/rpl_row_conflicts.result

@@ -24,7 +24,8 @@ a
 1
 [on slave]
 ---- Wait until slave stops with an error ----
-Last_SQL_Error = Could not execute Write_rows event on table test.t1; Duplicate entry '1' for key 'PRIMARY', Error_code: 1062; handler error HA_ERR_FOUND_DUPP_KEY; the event's master log master-bin.000001, end_log_pos 347 (expected "duplicate key" error)
+Last_SQL_Error (expected "duplicate key" error)
+Could not execute Write_rows event on table test.t1; Duplicate entry '1' for key 'PRIMARY', Error_code: 1062; handler error HA_ERR_FOUND_DUPP_KEY; the event's master log master-bin.000001, end_log_pos END_LOG_POS
 SELECT * FROM t1;
 a
 1

mysql-test/suite/rpl/r/rpl_stm_conflicts.result

@@ -19,7 +19,8 @@ a
 1
 [on slave]
 ---- Wait until slave stops with an error ----
-Last_SQL_Error = Error 'Duplicate entry '1' for key 'PRIMARY'' on query. Default database: 'test'. Query: 'INSERT INTO t1 VALUES (1)' (expected "duplicate key" error)
+Last_SQL_Error (expected "duplicate key" error)
+Error 'Duplicate entry '1' for key 'PRIMARY'' on query. Default database: 'test'. Query: 'INSERT INTO t1 VALUES (1)'
 SELECT * FROM t1;
 a
 1

mysql-test/suite/rpl/r/rpl_stm_until.result

@@ -260,7 +260,7 @@ Note	1051	Unknown table 't1'
 flush logs;
 stop slave;
 reset slave;
-start slave until master_log_file='master-bin.000001', master_log_pos=294 /* to stop right before DROP */;
+start slave until master_log_file='master-bin.000001', master_log_pos=MASTER_LOG_POS;  /* to stop right before DROP */;
 show tables /* t1 must exist */;
 Tables_in_test
 t1

mysql-test/suite/rpl/t/rpl_row_mysqlbinlog.test

@@ -29,9 +29,11 @@ DROP TABLE IF EXISTS t1,t2,t3;
 connection master;
 CREATE TABLE t1(word VARCHAR(20));
 CREATE TABLE t2(id INT AUTO_INCREMENT NOT NULL PRIMARY KEY);
+--let $position= query_get_value(SHOW MASTER STATUS, Position, 1)
 CREATE TABLE t3(c1 INT NOT NULL PRIMARY KEY, c2 LONGBLOB, c3 TIMESTAMP, c4 TEXT, c5 FLOAT); 
-
-
+--let $stop_position=query_get_value(SHOW MASTER STATUS, Position, 1)
+--let $stop_position1=`select $stop_position - 1`
+--let $binlog_start_pos=query_get_value(SHOW BINLOG EVENTS LIMIT 1, End_log_pos, 1)
 # Test Section
 # Lets start by putting some data into the tables.
 
@@ -167,8 +169,7 @@ remove_file $MYSQLTEST_VARDIR/tmp/master.sql;
 select "--- Test 2 position test --" as "";
 --enable_query_log
 let $MYSQLD_DATADIR= `select @@datadir;`;
---replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --start-position=417 --stop-position=570 $MYSQLD_DATADIR/master-bin.000001
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --start-position=$position --stop-position=$stop_position $MYSQLD_DATADIR/master-bin.000001
 
 # These are tests for remote binlog.
 # They should return the same as previous test.
@@ -179,7 +180,7 @@ select "--- Test 3 First Remote test --" as "";
 
 # This is broken now
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=569 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=$stop_position --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
 
 --disable_query_log
 select "--- Test 4 Second Remote test --" as "";
@@ -251,7 +252,7 @@ connection master;
 select "--- Test 5 LOAD DATA --" as "";
 --enable_query_log
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=106 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=$binlog_start_pos --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
 
 # Bug#7853 (mysqlbinlog does not accept input from stdin)
 
@@ -260,13 +261,13 @@ select "--- Test 6 reading stdin --" as "";
 --enable_query_log
 let $MYSQLD_DATADIR= `select @@datadir;`;
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
---exec $MYSQL_BINLOG --short-form --stop-position=569 - < $MYSQLD_DATADIR/master-bin.000001
+--exec $MYSQL_BINLOG --short-form --stop-position=$stop_position1 - < $MYSQLD_DATADIR/master-bin.000001
 
 --disable_query_log
 select "--- Test 7 reading stdin w/position --" as "";
 --enable_query_log
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
---exec $MYSQL_BINLOG --short-form --start-position=417 --stop-position=570 - < $MYSQLD_DATADIR/master-bin.000001
+--exec $MYSQL_BINLOG --short-form --start-position=$position --stop-position=$stop_position - < $MYSQLD_DATADIR/master-bin.000001
        
 # Bug#16217 (mysql client did not know how not switch its internal charset)
 --disable_query_log

mysql-test/suite/rpl/t/rpl_stm_until.test

@@ -181,11 +181,14 @@ flush logs;
 let $MYSQLD_DATADIR= `select @@datadir`;
 --remove_file $MYSQLD_DATADIR/master-bin.000001
 --copy_file $MYSQL_TEST_DIR/std_data/bug47142_master-bin.000001 $MYSQLD_DATADIR/master-bin.000001
+# this a constant bound to the bug47142_master-bin.000001 binlog file
+--let $binlog_before_drop=294;
 
 connection slave;
 stop slave;
 reset slave;
-start slave until master_log_file='master-bin.000001', master_log_pos=294 /* to stop right before DROP */;
+--replace_regex /master_log_pos=[0-9]+/master_log_pos=MASTER_LOG_POS/
+eval start slave until master_log_file='master-bin.000001', master_log_pos=$binlog_before_drop  /* to stop right before DROP */;
 --source include/wait_for_slave_sql_to_stop.inc
 
 show tables /* t1 must exist */;

mysql-test/suite/rpl_ndb/r/rpl_ndb_multi.result

@@ -30,7 +30,7 @@ FROM mysql.ndb_binlog_index WHERE epoch = <the_epoch> ;
 CHANGE MASTER TO
 master_port=<MASTER_PORT1>,
 master_log_file = 'master-bin.000001',
-master_log_pos = 107 ;
+master_log_pos = BINLOG_START ;
 start slave;
 INSERT INTO t1 VALUES ("row2","will go away",2),("row3","will change",3),("row4","D",4);
 DELETE FROM t1 WHERE c3 = 1;

mysql-test/suite/rpl_ndb/t/rpl_ndb_multi.test

@@ -40,6 +40,7 @@ let $the_file= `SELECT @the_file` ;
 # now connect the slave to the _other_ "master"
 connection slave;
 --replace_result $MASTER_MYPORT1 <MASTER_PORT1>
+--replace_regex /master_log_pos = [0-9]+/master_log_pos = BINLOG_START/
 eval CHANGE MASTER TO
   master_port=$MASTER_MYPORT1,
   master_log_file = '$the_file',

mysql-test/t/mysqlbinlog.test

@@ -36,6 +36,7 @@ load data infile '../../std_data/words.dat' into table t1;
 load data infile '../../std_data/words.dat' into table t1;
 load data infile '../../std_data/words.dat' into table t1;
 # simple query to show more in second binlog
+--let $binlog_start_pos=query_get_value(SHOW MASTER STATUS, Position, 1)
 insert into t1 values ("Alas");
 flush logs;
 
@@ -75,7 +76,7 @@ select "--- --start-position --" as "";
 --enable_query_log
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 --replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --start-position=1074 $MYSQLD_DATADIR/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --start-position=$binlog_start_pos $MYSQLD_DATADIR/master-bin.000002
 
 # These are tests for remote binlog.
 # They should return the same as previous test.
@@ -111,8 +112,7 @@ select "--- --start-position --" as "";
 --enable_query_log
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
 --replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --read-from-remote-server --start-position=1074 --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
-
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --read-from-remote-server --start-position=$binlog_start_pos --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000002
 
 # Bug#7853 mysqlbinlog does not accept input from stdin
 --disable_query_log
@@ -124,7 +124,9 @@ select "--- reading stdin --" as "";
 
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
 --replace_regex /SQL_LOAD_MB-[0-9]-[0-9]/SQL_LOAD_MB-#-#/
---exec $MYSQL_BINLOG --short-form --start-position=79 - < $MYSQL_TEST_DIR/std_data/trunc_binlog.000001
+# postion is constant to correspond to an event in pre-recorded binlog
+--let $binlog_start_pos=79
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_start_pos - < $MYSQL_TEST_DIR/std_data/trunc_binlog.000001
 drop table t1,t2;
 
 #

mysql-test/t/mysqlbinlog2.test

@@ -21,7 +21,9 @@ create table t1 (a int auto_increment not null primary key, b char(3));
 insert into t1 values(null, "a");
 insert into t1 values(null, "b");
 set timestamp=@a+2;
+--let $binlog_pos_760=query_get_value(SHOW MASTER STATUS, Position, 1)
 insert into t1 values(null, "c");
+--let $binlog_pos_951=query_get_value(SHOW BINLOG EVENTS in 'master-bin.000001' from $binlog_pos_760, Pos, 4)
 set timestamp=@a+4;
 insert into t1 values(null, "d");
 insert into t1 values(null, "e");
@@ -29,6 +31,8 @@ insert into t1 values(null, "e");
 flush logs;
 set timestamp=@a+1; # this could happen on a slave
 insert into t1 values(null, "f");
+--let $binlog_pos_135=query_get_value(SHOW BINLOG EVENTS in 'master-bin.000002', Pos, 3)
+--let $binlog_pos_203=query_get_value(SHOW BINLOG EVENTS in 'master-bin.000002', Pos, 4)
 
 # delimiters are for easier debugging in future
 
@@ -50,15 +54,15 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 $MYSQLD_DATADIR/master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 $MYSQLD_DATADIR/master-bin.000001 
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=760 $MYSQLD_DATADIR/master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --stop-position=$binlog_pos_760 $MYSQLD_DATADIR/master-bin.000001 
 --disable_query_log
 select "--- start and stop positions ---" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 --stop-position 951  $MYSQLD_DATADIR/master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 --stop-position=$binlog_pos_951  $MYSQLD_DATADIR/master-bin.000001 
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -84,11 +88,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 $MYSQLD_DATADIR/master-bin.000001 $MYSQLD_DATADIR/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 $MYSQLD_DATADIR/master-bin.000001 $MYSQLD_DATADIR/master-bin.000002
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=203 $MYSQLD_DATADIR/master-bin.000001 $MYSQLD_DATADIR/master-bin.000002
+--exec $MYSQL_BINLOG --short-form --stop-position=$binlog_pos_203 $MYSQLD_DATADIR/master-bin.000001 $MYSQLD_DATADIR/master-bin.000002
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -111,15 +115,15 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
+--exec $MYSQL_BINLOG --short-form --stop-position=$binlog_pos_760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001 
 --disable_query_log
 select "--- start and stop positions ---" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 --stop-position 951 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 --stop-position=$binlog_pos_951 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log
@@ -142,11 +146,11 @@ select "--- offset --" as "";
 --disable_query_log
 select "--- start-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --start-position=760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
+--exec $MYSQL_BINLOG --short-form --start-position=$binlog_pos_760 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
 --disable_query_log
 select "--- stop-position --" as "";
 --enable_query_log
---exec $MYSQL_BINLOG --short-form --stop-position=135 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
+--exec $MYSQL_BINLOG --short-form --stop-position=$binlog_pos_135 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001  master-bin.000002
 --disable_query_log
 select "--- start-datetime --" as "";
 --enable_query_log

mysql-test/t/rpl_mysqldump_slave.test

@@ -15,11 +15,14 @@ use test;
 connection slave;
 
 # Execute mysqldump with --dump-slave
+--replace_regex /MASTER_LOG_POS=[0-9]+/MASTER_LOG_POS=BINLOG_START/
 --exec $MYSQL_DUMP_SLAVE --compact --dump-slave test
 
 # Execute mysqldump with --dump-slave and --apply-slave-statements 
+--replace_regex /MASTER_LOG_POS=[0-9]+/MASTER_LOG_POS=BINLOG_START/
 --exec $MYSQL_DUMP_SLAVE --compact --dump-slave --apply-slave-statements test
 
+--replace_regex /MASTER_LOG_POS=[0-9]+/MASTER_LOG_POS=BINLOG_START/
 --replace_result $MASTER_MYPORT MASTER_MYPORT
 # Execute mysqldump with --dump-slave ,--apply-slave-statements and --include-master-host-port
 --exec $MYSQL_DUMP_SLAVE --compact --dump-slave --apply-slave-statements --include-master-host-port test