Skip to content

M
MariaDB
Commit 714762dd authored by Sujatha's avatar Sujatha
Browse files
Options

MDEV-18648: slave_parallel_mode= optimistic default in 10.5 

Description:
============
To change 'CONSERVATIVE' @@global.slave_parallel_mode default to 'OPTIMISTIC'
in 10.5.

@sql/sys_vars.cc
Changed default parallel_mode to 'OPTIMISTIC'

@sql/rpl_filter.cc
Changed default parallel_mode to 'OPTIMISTIC'

@sql/mysqld.cc
Removed the initialization of 'SLAVE_PARALLEL_CONSERVATIVE' to
'opt_slave_parallel_mode' variable.

@mysql-test/suite/rpl/t/rpl_parallel_mdev6589.test
@mysql-test/suite/rpl/t/rpl_mdev6386.test
Added 'mtr' suppression to ignore 'ER_PRIOR_COMMIT_FAILED'. In case of
'OPTIMISTIC' mode if a transaction gets killed during "wait_for_prior_commit"
it results in above error "1964". Hence suppression needs to be added for this
error.

@mysql-test/suite/rpl/t/rpl_parallel_conflicts.test
Test has a 'slave.opt' which explicitly sets slave_parallel_mode to
'conservative'. When the test ends this mode conflicts with new default mode.
Hence check test case reports an error. The 'slave.opt' is removed and options
are set and reset within test.

@mysql-test/suite/multi_source/info_logs.result
@mysql-test/suite/multi_source/reset_slave.result
@mysql-test/suite/multi_source/simple.result
Result content mismatch in "show slave status" output. This is expected as new
slave_parallel_mode='OPTIMISTIC'.

@mysql-test/include/check-testcase.test
Updated default 'slave_parallel_mode' to 'optimistic'.

Refactored rpl_parallel.test into following test cases.
Test case 1: @mysql-test/suite/rpl/t/rpl_parallel_domain.test
Test case 2: @mysql-test/suite/rpl/t/rpl_parallel_domain_slave_single_grp.test
Test case 3: @mysql-test/suite/rpl/t/rpl_parallel_single_grpcmt.test
Test case 4: @mysql-test/suite/rpl/t/rpl_parallel_stop_slave.test
Test case 5: @mysql-test/suite/rpl/t/rpl_parallel_slave_bgc_kill.test
Test case 6: @mysql-test/suite/rpl/t/rpl_parallel_gco_wait_kill.test
Test case 7: @mysql-test/suite/rpl/t/rpl_parallel_free_deferred_event.test
Test case 8: @mysql-test/suite/rpl/t/rpl_parallel_missed_error_handling.test
Test case 9: @mysql-test/suite/rpl/t/rpl_parallel_innodb_lock_conflict.test
Test case 10: @mysql-test/suite/rpl/t/rpl_parallel_gtid_slave_pos_update_fail.test
Test case 11: @mysql-test/suite/rpl/t/rpl_parallel_wrong_exec_master_pos.test
Test case 12: @mysql-test/suite/rpl/t/rpl_parallel_partial_binlog_trans.test
Test case 13: @mysql-test/suite/rpl/t/rpl_parallel_ignore_error_on_rotate.test
Test case 14: @mysql-test/suite/rpl/t/rpl_parallel_wrong_binlog_order.test
Test case 15: @mysql-test/suite/rpl/t/rpl_parallel_incorrect_relay_pos.test
Test case 16: @mysql-test/suite/rpl/t/rpl_parallel_retry_deadlock.test
Test case 17: @mysql-test/suite/rpl/t/rpl_parallel_deadlock_corrupt_binlog.test
Test case 18: @mysql-test/suite/rpl/t/rpl_parallel_mode.test
Test case 19: @mysql-test/suite/rpl/t/rpl_parallel_analyze_table_hang.test
Test case 20: @mysql-test/suite/rpl/t/rpl_parallel_record_gtid_wakeup.test
Test case 21: @mysql-test/suite/rpl/t/rpl_parallel_stop_on_con_kill.test
Test case 22: @mysql-test/suite/rpl/t/rpl_parallel_rollback_assert.test
parent 7e10e80b
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 7318 additions and 5623 deletions
mysql-test/include/check-testcase.test
View file @ 714762dd
......@@ -66,7 +66,7 @@ if ($tmp)
--echo Gtid_IO_Pos #
--echo Replicate_Do_Domain_Ids
--echo Replicate_Ignore_Domain_Ids
--echo Parallel_Mode conservative
--echo Parallel_Mode optimistic
--echo SQL_Delay 0
--echo SQL_Remaining_Delay NULL
--echo Slave_SQL_Running_State
......
mysql-test/suite/binlog_encryption/rpl_parallel.result deleted 100644 → 0
View file @ 7e10e80b
This diff is collapsed.
mysql-test/suite/binlog_encryption/rpl_parallel.test deleted 100644 → 0
View file @ 7e10e80b
--source suite/rpl/include/rpl_parallel.inc
mysql-test/suite/binlog_encryption/rpl_parallel_analyze_table_hang.result 0 → 100644
View file @ 714762dd
*** MDEV-7888: ANALYZE TABLE does wakeup_subsequent_commits(), causing wrong binlog order and parallel replication hang ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
include/stop_slave.inc
SET GLOBAL slave_parallel_mode='conservative';
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug= '+d,inject_analyze_table_sleep';
connection server_1;
SET @old_dbug= @@SESSION.debug_dbug;
SET SESSION debug_dbug="+d,binlog_force_commit_id";
SET @commit_id= 10000;
ANALYZE TABLE t2;
Table Op Msg_type Msg_text
test.t2 analyze status Engine-independent statistics collected
test.t2 analyze status OK
INSERT INTO t3 VALUES (120, 0);
SET @commit_id= 10001;
INSERT INTO t3 VALUES (121, 0);
SET SESSION debug_dbug=@old_dbug;
SELECT * FROM t3 WHERE a >= 120 ORDER BY a;
a b
120 0
121 0
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t3 WHERE a >= 120 ORDER BY a;
a b
120 0
121 0
include/stop_slave.inc
SET GLOBAL debug_dbug= @old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
include/start_slave.inc
connection server_1;
DROP TABLE t2,t3;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_analyze_table_hang.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_analyze_table_hang.inc
mysql-test/suite/binlog_encryption/rpl_parallel_deadlock_corrupt_binlog.result 0 → 100644
View file @ 714762dd
*** MDEV-7335: Potential parallel slave deadlock with specific binlog corruption ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=1;
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,slave_discard_xid_for_gtid_0_x_1000";
connection server_1;
INSERT INTO t2 VALUES (101);
INSERT INTO t2 VALUES (102);
INSERT INTO t2 VALUES (103);
INSERT INTO t2 VALUES (104);
INSERT INTO t2 VALUES (105);
SET gtid_seq_no=1000;
INSERT INTO t2 VALUES (106);
INSERT INTO t2 VALUES (107);
INSERT INTO t2 VALUES (108);
INSERT INTO t2 VALUES (109);
INSERT INTO t2 VALUES (110);
INSERT INTO t2 VALUES (111);
INSERT INTO t2 VALUES (112);
INSERT INTO t2 VALUES (113);
INSERT INTO t2 VALUES (114);
INSERT INTO t2 VALUES (115);
INSERT INTO t2 VALUES (116);
INSERT INTO t2 VALUES (117);
INSERT INTO t2 VALUES (118);
INSERT INTO t2 VALUES (119);
INSERT INTO t2 VALUES (120);
INSERT INTO t2 VALUES (121);
INSERT INTO t2 VALUES (122);
INSERT INTO t2 VALUES (123);
INSERT INTO t2 VALUES (124);
INSERT INTO t2 VALUES (125);
INSERT INTO t2 VALUES (126);
INSERT INTO t2 VALUES (127);
INSERT INTO t2 VALUES (128);
INSERT INTO t2 VALUES (129);
INSERT INTO t2 VALUES (130);
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a >= 100 ORDER BY a;
a
101
102
103
104
105
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP TABLE t2;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_deadlock_corrupt_binlog.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_deadlock_corrupt_binlog.inc
mysql-test/suite/binlog_encryption/rpl_parallel_domain.result 0 → 100644
View file @ 714762dd
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=10;
ERROR HY000: This operation cannot be performed as you have a running slave ''; run STOP SLAVE '' first
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
SELECT IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*)))
OK
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
SELECT IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*)))
OK
include/stop_slave.inc
SELECT IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*)))
OK
include/start_slave.inc
SELECT IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*)))
OK
*** Test long-running query in domain 1 can run in parallel with short queries in domain 0 ***
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1);
INSERT INTO t2 VALUES (1);
connection server_2;
connect con_temp1,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
LOCK TABLE t1 WRITE;
connection server_1;
SET gtid_domain_id=1;
INSERT INTO t1 VALUES (2);
SET gtid_domain_id=0;
INSERT INTO t2 VALUES (2);
INSERT INTO t2 VALUES (3);
BEGIN;
INSERT INTO t2 VALUES (4);
INSERT INTO t2 VALUES (5);
COMMIT;
INSERT INTO t2 VALUES (6);
connection server_2;
SELECT * FROM t2 ORDER by a;
a
1
2
3
4
5
6
connection con_temp1;
SELECT * FROM t1;
a
1
UNLOCK TABLES;
connection server_2;
SELECT * FROM t1 ORDER BY a;
a
1
2
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t1,t2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_domain.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_domain.inc
mysql-test/suite/binlog_encryption/rpl_parallel_domain_slave_single_grp.result 0 → 100644
View file @ 714762dd
*** Test two transactions in different domains committed in opposite order on slave but in a single group commit. ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1);
INSERT INTO t2 VALUES (1);
connection server_2;
include/stop_slave.inc
connection server_1;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
SET @old_format= @@SESSION.binlog_format;
SET binlog_format='statement';
SET gtid_domain_id=1;
INSERT INTO t2 VALUES (foo(10,
'commit_before_enqueue SIGNAL ready1 WAIT_FOR cont1',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready2'));
connection server_2;
FLUSH LOGS;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
SET @old_format=@@GLOBAL.binlog_format;
SET GLOBAL binlog_format=statement;
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
include/start_slave.inc
SET debug_sync='now WAIT_FOR ready1';
connection server_1;
SET gtid_domain_id=2;
INSERT INTO t2 VALUES (foo(11,
'commit_before_enqueue SIGNAL ready3 WAIT_FOR cont3',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready4 WAIT_FOR cont4'));
SET gtid_domain_id=0;
SELECT * FROM t2 WHERE a >= 10 ORDER BY a;
a
10
11
connection server_2;
SET debug_sync='now WAIT_FOR ready3';
SET debug_sync='now SIGNAL cont3';
SET debug_sync='now WAIT_FOR ready4';
SET debug_sync='now SIGNAL cont1';
SET debug_sync='now WAIT_FOR ready2';
SET debug_sync='now SIGNAL cont4';
SELECT * FROM t2 WHERE a >= 10 ORDER BY a;
a
10
11
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
slave-bin.000002 # Binlog_checkpoint # # slave-bin.000002
slave-bin.000002 # Gtid # # BEGIN GTID #-#-# cid=#
slave-bin.000002 # Query # # use `test`; INSERT INTO t2 VALUES (foo(11,
'commit_before_enqueue SIGNAL ready3 WAIT_FOR cont3',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready4 WAIT_FOR cont4'))
slave-bin.000002 # Xid # # COMMIT /* XID */
slave-bin.000002 # Gtid # # BEGIN GTID #-#-# cid=#
slave-bin.000002 # Query # # use `test`; INSERT INTO t2 VALUES (foo(10,
'commit_before_enqueue SIGNAL ready1 WAIT_FOR cont1',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready2'))
slave-bin.000002 # Xid # # COMMIT /* XID */
FLUSH LOGS;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
SET GLOBAL binlog_format=@old_format;
connection server_1;
DROP function foo;
DROP TABLE t1,t2;
SET DEBUG_SYNC= 'RESET';
SET GLOBAL binlog_format=@old_format;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_domain_slave_single_grp.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_domain_slave_single_grp.inc
mysql-test/suite/binlog_encryption/rpl_parallel_free_deferred_event.result 0 → 100644
View file @ 714762dd
*** MDEV-5788 Incorrect free of rgi->deferred_events in parallel replication ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL replicate_ignore_table="test.t3";
SET GLOBAL slave_parallel_threads=2;
include/start_slave.inc
connection server_1;
INSERT INTO t3 VALUES (100, rand());
INSERT INTO t3 VALUES (101, rand());
connection server_2;
connection server_1;
INSERT INTO t3 VALUES (102, rand());
INSERT INTO t3 VALUES (103, rand());
INSERT INTO t3 VALUES (104, rand());
INSERT INTO t3 VALUES (105, rand());
connection server_2;
include/stop_slave.inc
SET GLOBAL replicate_ignore_table="";
include/start_slave.inc
connection server_1;
INSERT INTO t3 VALUES (106, rand());
INSERT INTO t3 VALUES (107, rand());
connection server_2;
SELECT * FROM t3 WHERE a >= 100 ORDER BY a;
a b
106 #
107 #
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t3;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_free_deferred_event.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_free_deferred_event.inc
mysql-test/suite/binlog_encryption/rpl_parallel_gco_wait_kill.result 0 → 100644
View file @ 714762dd
*** Test killing thread that is waiting to start transaction until previous transaction commits ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode= @@GLOBAL.slave_parallel_mode;
include/stop_slave.inc
SET sql_log_bin=0;
CALL mtr.add_suppression("Query execution was interrupted");
CALL mtr.add_suppression("Slave: Connection was killed");
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
SET sql_log_bin=1;
SET GLOBAL slave_parallel_threads=10;
SET GLOBAL slave_parallel_mode= 'conservative';
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
connect con_temp3,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con_temp4,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con_temp5,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
connection server_1;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=4;
include/start_slave.inc
connection server_1;
SET gtid_domain_id=2;
BEGIN;
INSERT INTO t3 VALUES (70, foo(70,
'rpl_parallel_start_waiting_for_prior SIGNAL t4_waiting', ''));
INSERT INTO t3 VALUES (60, foo(60,
'ha_write_row_end SIGNAL d2_query WAIT_FOR d2_cont2',
'rpl_parallel_end_of_group SIGNAL d2_done WAIT_FOR d2_cont'));
COMMIT;
SET gtid_domain_id=0;
connection server_2;
SET debug_sync='now WAIT_FOR d2_query';
connection server_1;
SET gtid_domain_id=1;
BEGIN;
INSERT INTO t3 VALUES (61, foo(61,
'rpl_parallel_start_waiting_for_prior SIGNAL t3_waiting',
'rpl_parallel_start_waiting_for_prior_killed SIGNAL t3_killed'));
INSERT INTO t3 VALUES (62, foo(62,
'ha_write_row_end SIGNAL d1_query WAIT_FOR d1_cont2',
'rpl_parallel_end_of_group SIGNAL d1_done WAIT_FOR d1_cont'));
COMMIT;
SET gtid_domain_id=0;
connection server_2;
SET debug_sync='now WAIT_FOR d1_query';
connection server_1;
SET gtid_domain_id=0;
INSERT INTO t3 VALUES (63, foo(63,
'ha_write_row_end SIGNAL d0_query WAIT_FOR d0_cont2',
'rpl_parallel_end_of_group SIGNAL d0_done WAIT_FOR d0_cont'));
connection server_2;
SET debug_sync='now WAIT_FOR d0_query';
connection server_1;
SET gtid_domain_id=3;
BEGIN;
INSERT INTO t3 VALUES (68, foo(68,
'rpl_parallel_start_waiting_for_prior SIGNAL t2_waiting', ''));
INSERT INTO t3 VALUES (69, foo(69,
'ha_write_row_end SIGNAL d3_query WAIT_FOR d3_cont2',
'rpl_parallel_end_of_group SIGNAL d3_done WAIT_FOR d3_cont'));
COMMIT;
SET gtid_domain_id=0;
connection server_2;
SET debug_sync='now WAIT_FOR d3_query';
SET debug_sync='now SIGNAL d2_cont2';
SET debug_sync='now WAIT_FOR d2_done';
SET debug_sync='now SIGNAL d1_cont2';
SET debug_sync='now WAIT_FOR d1_done';
SET debug_sync='now SIGNAL d0_cont2';
SET debug_sync='now WAIT_FOR d0_done';
SET debug_sync='now SIGNAL d3_cont2';
SET debug_sync='now WAIT_FOR d3_done';
connection con_temp3;
INSERT INTO t3 VALUES (64, foo(64,
'rpl_parallel_before_mark_start_commit SIGNAL t1_waiting WAIT_FOR t1_cont', ''));
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2 WAIT_FOR master_cont2';
INSERT INTO t3 VALUES (65, foo(65, '', ''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
connection con_temp4;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued3';
INSERT INTO t3 VALUES (66, foo(66, '', ''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued3';
connection con_temp5;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued4';
INSERT INTO t3 VALUES (67, foo(67, '', ''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued4';
SET debug_sync='now SIGNAL master_cont2';
connection con_temp3;
connection con_temp4;
connection con_temp5;
connection server_1;
SELECT * FROM t3 WHERE a >= 60 ORDER BY a;
a b
60 60
61 61
62 62
63 63
64 64
65 65
66 66
67 67
68 68
69 69
70 70
SET debug_sync='RESET';
connection server_2;
SET debug_sync='now SIGNAL d0_cont';
SET debug_sync='now WAIT_FOR t1_waiting';
SET debug_sync='now SIGNAL d3_cont';
SET debug_sync='now WAIT_FOR t2_waiting';
SET debug_sync='now SIGNAL d1_cont';
SET debug_sync='now WAIT_FOR t3_waiting';
SET debug_sync='now SIGNAL d2_cont';
SET debug_sync='now WAIT_FOR t4_waiting';
KILL THD_ID;
SET debug_sync='now WAIT_FOR t3_killed';
SET debug_sync='now SIGNAL t1_cont';
include/wait_for_slave_sql_error.inc [errno=1317,1927,1964]
STOP SLAVE IO_THREAD;
SELECT * FROM t3 WHERE a >= 60 AND a != 65 ORDER BY a;
a b
60 60
61 61
62 62
63 63
64 64
68 68
69 69
70 70
SET debug_sync='RESET';
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_1;
UPDATE t3 SET b=b+1 WHERE a=60;
connection server_2;
include/start_slave.inc
SELECT * FROM t3 WHERE a >= 60 ORDER BY a;
a b
60 61
61 61
62 62
63 63
64 64
65 65
66 66
67 67
68 68
69 69
70 70
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
include/start_slave.inc
*** 5. Test killing thread that is waiting for queue of max length to shorten ***
SET @old_max_queued= @@GLOBAL.slave_parallel_max_queued;
SET GLOBAL slave_parallel_max_queued=9000;
connection server_1;
INSERT INTO t3 VALUES (80, foo(0,
'ha_write_row_end SIGNAL query_waiting WAIT_FOR query_cont', ''));
connection server_2;
SET debug_sync='now WAIT_FOR query_waiting';
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,rpl_parallel_wait_queue_max";
connection server_1;
SELECT * FROM t3 WHERE a >= 80 ORDER BY a;
a b
80 0
81 10000
connection server_2;
SET debug_sync='now WAIT_FOR wait_queue_ready';
KILL THD_ID;
SET debug_sync='now WAIT_FOR wait_queue_killed';
SET debug_sync='now SIGNAL query_cont';
include/wait_for_slave_sql_error.inc [errno=1317,1927,1964]
STOP SLAVE IO_THREAD;
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_max_queued= @old_max_queued;
connection server_1;
INSERT INTO t3 VALUES (82,0);
connection server_2;
SET debug_sync='RESET';
include/start_slave.inc
SELECT * FROM t3 WHERE a >= 80 ORDER BY a;
a b
80 0
81 10000
82 0
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP function foo;
DROP TABLE t3;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_gco_wait_kill.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_gco_wait_kill.inc
mysql-test/suite/binlog_encryption/rpl_parallel_gtid_slave_pos_update_fail.result 0 → 100644
View file @ 714762dd
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t4 (a INT PRIMARY KEY, b INT, KEY b_idx(b)) ENGINE=InnoDB;
INSERT INTO t4 VALUES (1,NULL), (2,2), (3,NULL), (4,4), (5, NULL), (6, 6);
connect con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con2,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connection server_2;
include/stop_slave.inc
connection con1;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
UPDATE t4 SET b=NULL WHERE a=6;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con2;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
DELETE FROM t4 WHERE b <= 1;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con1;
connection con2;
SET debug_sync='RESET';
connection server_2;
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,disable_thd_need_ordering_with";
include/start_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SELECT * FROM t4 ORDER BY a;
a b
1 NULL
2 2
3 NULL
4 4
5 NULL
6 NULL
SET @last_gtid= 'GTID';
SELECT IF(@@gtid_slave_pos LIKE CONCAT('%',@last_gtid,'%'), "GTID found ok",
CONCAT("GTID ", @last_gtid, " not found in gtid_slave_pos=", @@gtid_slave_pos))
AS result;
result
GTID found ok
SELECT "ROW FOUND" AS `Is the row found?`
FROM mysql.gtid_slave_pos
WHERE CONCAT(domain_id, "-", server_id, "-", seq_no) = @last_gtid;
Is the row found?
ROW FOUND
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP TABLE t4;
SET DEBUG_SYNC= 'RESET';
disconnect con1;
disconnect con2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_gtid_slave_pos_update_fail.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_gtid_slave_pos_update_fail.inc
mysql-test/suite/binlog_encryption/rpl_parallel_ignore_error_on_rotate.result 0 → 100644
View file @ 714762dd
*** MDEV-6551: Some replication errors are ignored if slave_parallel_threads > 0 ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_threads=1;
CHANGE MASTER TO master_use_gtid=slave_pos;
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
SET gtid_domain_id=1;
INSERT INTO t2 VALUES (1);
SET gtid_domain_id=0;
SET gtid_domain_id=2;
INSERT INTO t2 VALUES (2);
SET gtid_domain_id=0;
INSERT INTO t2 VALUES (31);
include/save_master_gtid.inc
connection server_2;
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET GLOBAL slave_parallel_threads= 0;
include/start_slave.inc
SET sql_log_bin= 0;
INSERT INTO t2 VALUES (32);
SET sql_log_bin= 1;
connection server_1;
INSERT INTO t2 VALUES (32);
FLUSH LOGS;
INSERT INTO t2 VALUES (33);
INSERT INTO t2 VALUES (34);
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
a
31
32
33
34
include/save_master_gtid.inc
connection server_2;
include/wait_for_slave_sql_error.inc [errno=1062]
connection server_2;
include/stop_slave_io.inc
SET GLOBAL slave_parallel_threads=10;
START SLAVE;
include/wait_for_slave_sql_error.inc [errno=1062]
START SLAVE SQL_THREAD;
include/wait_for_slave_sql_error.inc [errno=1062]
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
a
31
32
SET sql_slave_skip_counter= 1;
ERROR HY000: When using parallel replication and GTID with multiple replication domains, @@sql_slave_skip_counter can not be used. Instead, setting @@gtid_slave_pos explicitly can be used to skip to after a given GTID position
include/stop_slave_io.inc
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
a
31
32
33
34
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
include/start_slave.inc
connection server_1;
DROP TABLE t2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_ignore_error_on_rotate.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_ignore_error_on_rotate.inc
mysql-test/suite/binlog_encryption/rpl_parallel_incorrect_relay_pos.result 0 → 100644
View file @ 714762dd
*** MDEV-7237: Parallel replication: incorrect relaylog position after stop/start the slave ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_threads=10;
SET GLOBAL slave_parallel_mode='conservative';
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
INSERT INTO t2 VALUES (40);
connection server_2;
connect con_temp2,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
include/stop_slave.inc
CHANGE MASTER TO master_use_gtid=no;
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,rpl_parallel_scheduled_gtid_0_x_100";
SET GLOBAL debug_dbug="+d,rpl_parallel_wait_for_done_trigger";
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
connection server_1;
INSERT INTO t2 VALUES (41);
INSERT INTO t2 VALUES (42);
SET @old_format= @@binlog_format;
SET binlog_format= statement;
DELETE FROM t2 WHERE a=40;
SET binlog_format= @old_format;
INSERT INTO t2 VALUES (43);
INSERT INTO t2 VALUES (44);
FLUSH LOGS;
INSERT INTO t2 VALUES (45);
SET gtid_seq_no=100;
INSERT INTO t2 VALUES (46);
connection con_temp2;
BEGIN;
SELECT * FROM t2 WHERE a=40 FOR UPDATE;
a
40
connection server_2;
include/start_slave.inc
SET debug_sync= 'now WAIT_FOR scheduled_gtid_0_x_100';
STOP SLAVE;
connection con_temp2;
SET debug_sync= 'now WAIT_FOR wait_for_done_waiting';
ROLLBACK;
connection server_2;
include/wait_for_slave_sql_to_stop.inc
SELECT * FROM t2 WHERE a >= 40 ORDER BY a;
a
41
42
include/start_slave.inc
SELECT * FROM t2 WHERE a >= 40 ORDER BY a;
a
41
42
43
44
45
46
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET DEBUG_SYNC= 'RESET';
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
DROP TABLE t2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_incorrect_relay_pos.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_incorrect_relay_pos.inc
mysql-test/suite/binlog_encryption/rpl_parallel_innodb_lock_conflict.result 0 → 100644
View file @ 714762dd
***MDEV-5914: Parallel replication deadlock due to InnoDB lock conflicts ***
include/master-slave.inc
[connection master]
connection server_2;
SET sql_log_bin=0;
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
SET sql_log_bin=1;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t4 (a INT PRIMARY KEY, b INT, KEY b_idx(b)) ENGINE=InnoDB;
INSERT INTO t4 VALUES (1,NULL), (2,2), (3,NULL), (4,4), (5, NULL), (6, 6);
connect con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con2,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connection con1;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
UPDATE t4 SET b=NULL WHERE a=6;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con2;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
DELETE FROM t4 WHERE b <= 3;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con1;
connection con2;
SET debug_sync='RESET';
connection server_2;
include/start_slave.inc
include/stop_slave.inc
SELECT * FROM t4 ORDER BY a;
a b
1 NULL
3 NULL
4 4
5 NULL
6 NULL
connection server_1;
DELETE FROM t4;
INSERT INTO t4 VALUES (1,NULL), (2,2), (3,NULL), (4,4), (5, NULL), (6, 6);
connection con1;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
INSERT INTO t4 VALUES (7, NULL);
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con2;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
DELETE FROM t4 WHERE b <= 3;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con1;
connection con2;
SET debug_sync='RESET';
connection server_2;
include/start_slave.inc
include/stop_slave.inc
SELECT * FROM t4 ORDER BY a;
a b
1 NULL
3 NULL
4 4
5 NULL
6 6
7 NULL
connection server_2;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
disconnect con1;
disconnect con2;
DROP TABLE t4;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_innodb_lock_conflict.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_innodb_lock_conflict.inc
mysql-test/suite/binlog_encryption/rpl_parallel_missed_error_handling.result 0 → 100644
View file @ 714762dd
*** MDEV-5921: In parallel replication, an error is not correctly signalled to the next transaction ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
connection server_1;
INSERT INTO t3 VALUES (110, 1);
connection server_2;
SELECT * FROM t3 WHERE a >= 110 ORDER BY a;
a b
110 1
SET sql_log_bin=0;
INSERT INTO t3 VALUES (111, 666);
SET sql_log_bin=1;
connection server_1;
connect con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
INSERT INTO t3 VALUES (111, 2);
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connect con2,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
INSERT INTO t3 VALUES (112, 3);
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con1;
connection con2;
SET debug_sync='RESET';
connection server_2;
include/wait_for_slave_sql_error.inc [errno=1062]
include/wait_for_slave_sql_to_stop.inc
SELECT * FROM t3 WHERE a >= 110 ORDER BY a;
a b
110 1
111 666
SET sql_log_bin=0;
DELETE FROM t3 WHERE a=111 AND b=666;
SET sql_log_bin=1;
START SLAVE SQL_THREAD;
SELECT * FROM t3 WHERE a >= 110 ORDER BY a;
a b
110 1
111 2
112 3
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
disconnect con1;
disconnect con2;
DROP TABLE t3;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_missed_error_handling.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_missed_error_handling.inc
mysql-test/suite/binlog_encryption/rpl_parallel_mode.result 0 → 100644
View file @ 714762dd
*** MDEV-6676 - test syntax of @@slave_parallel_mode ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
connection server_2;
Parallel_Mode = 'optimistic'
include/stop_slave.inc
SET GLOBAL slave_parallel_mode='aggressive';
Parallel_Mode = 'aggressive'
SET GLOBAL slave_parallel_mode='conservative';
Parallel_Mode = 'conservative'
*** MDEV-6676 - test that empty parallel_mode does not replicate in parallel ***
connection server_1;
INSERT INTO t2 VALUES (1040);
include/save_master_gtid.inc
connection server_2;
SET GLOBAL slave_parallel_mode='none';
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,slave_crash_if_parallel_apply";
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a >= 1040 ORDER BY a;
a
1040
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
*** MDEV-6676 - test disabling domain-based parallel replication ***
connection server_1;
SET gtid_domain_id = 1;
INSERT INTO t2 VALUES (1041);
INSERT INTO t2 VALUES (1042);
INSERT INTO t2 VALUES (1043);
INSERT INTO t2 VALUES (1044);
INSERT INTO t2 VALUES (1045);
INSERT INTO t2 VALUES (1046);
DELETE FROM t2 WHERE a >= 1041;
SET gtid_domain_id = 2;
INSERT INTO t2 VALUES (1041);
INSERT INTO t2 VALUES (1042);
INSERT INTO t2 VALUES (1043);
INSERT INTO t2 VALUES (1044);
INSERT INTO t2 VALUES (1045);
INSERT INTO t2 VALUES (1046);
SET gtid_domain_id = 0;
include/save_master_gtid.inc
connection server_2;
SET GLOBAL slave_parallel_mode=minimal;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a >= 1040 ORDER BY a;
a
1040
1041
1042
1043
1044
1045
1046
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
include/start_slave.inc
connection server_1;
DROP TABLE t2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_mode.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_mode.inc
mysql-test/suite/binlog_encryption/rpl_parallel_partial_binlog_trans.result 0 → 100644
View file @ 714762dd
*** MDEV_6435: Incorrect error handling when query binlogged partially on master with "killed" error ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=1;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t6 (a INT) ENGINE=MyISAM;
CREATE TRIGGER tr AFTER INSERT ON t6 FOR EACH ROW SET @a = 1;
connect con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connection con1;
SET debug_sync='sp_head_execute_before_loop SIGNAL ready WAIT_FOR cont';
INSERT INTO t6 VALUES (1), (2), (3);
connection server_1;
SET debug_sync='now WAIT_FOR ready';
KILL QUERY CONID;
SET debug_sync='now SIGNAL cont';
connection con1;
ERROR 70100: Query execution was interrupted
SET debug_sync='RESET';
connection server_1;
SET debug_sync='RESET';
connection server_2;
include/wait_for_slave_sql_error.inc [errno=1317]
STOP SLAVE IO_THREAD;
SET GLOBAL gtid_slave_pos= 'AFTER_ERROR_GTID_POS';
include/start_slave.inc
connection server_1;
INSERT INTO t6 VALUES (4);
SELECT * FROM t6 ORDER BY a;
a
1
4
connection server_2;
SELECT * FROM t6 ORDER BY a;
a
4
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP TABLE t6;
SET DEBUG_SYNC= 'RESET';
disconnect con1;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_partial_binlog_trans.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_partial_binlog_trans.inc
mysql-test/suite/binlog_encryption/rpl_parallel_record_gtid_wakeup.result 0 → 100644
View file @ 714762dd
*** MDEV-7929: record_gtid() for non-transactional event group calls wakeup_subsequent_commits() too early, causing slave hang. ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug= '+d,inject_record_gtid_serverid_100_sleep';
connection server_1;
SET @old_dbug= @@SESSION.debug_dbug;
SET SESSION debug_dbug="+d,binlog_force_commit_id";
SET @old_server_id= @@SESSION.server_id;
SET SESSION server_id= 100;
SET @commit_id= 10010;
ALTER TABLE t1 COMMENT "Hulubulu!";
SET SESSION server_id= @old_server_id;
INSERT INTO t3 VALUES (130, 0);
SET @commit_id= 10011;
INSERT INTO t3 VALUES (131, 0);
SET SESSION debug_dbug=@old_dbug;
SELECT * FROM t3 WHERE a >= 130 ORDER BY a;
a b
130 0
131 0
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t3 WHERE a >= 130 ORDER BY a;
a b
130 0
131 0
include/stop_slave.inc
SET GLOBAL debug_dbug= @old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t1,t3;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_record_gtid_wakeup.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_record_gtid_wakeup.inc
mysql-test/suite/binlog_encryption/rpl_parallel_retry_deadlock.result 0 → 100644
View file @ 714762dd
*** MDEV-7326 Server deadlock in connection with parallel replication ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
include/stop_slave.inc
SET GLOBAL slave_parallel_mode='conservative';
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t6 (a INT) ENGINE=MyISAM;
connection server_2;
connection server_1;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=3;
SET GLOBAL debug_dbug="+d,rpl_parallel_simulate_temp_err_xid";
include/start_slave.inc
connection server_1;
SET @old_format= @@SESSION.binlog_format;
SET binlog_format= STATEMENT;
INSERT INTO t1 VALUES (foo(50,
"rpl_parallel_start_waiting_for_prior SIGNAL t3_ready",
"rpl_parallel_end_of_group SIGNAL prep_ready WAIT_FOR prep_cont"));
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR prep_ready";
connection server_1;
INSERT INTO t2 VALUES (foo(50,
"rpl_parallel_simulate_temp_err_xid SIGNAL t1_ready1 WAIT_FOR t1_cont1",
"rpl_parallel_retry_after_unmark SIGNAL t1_ready2 WAIT_FOR t1_cont2"));
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR t1_ready1";
connection server_1;
INSERT INTO t1 VALUES (foo(51,
"rpl_parallel_before_mark_start_commit SIGNAL t2_ready1 WAIT_FOR t2_cont1",
"rpl_parallel_after_mark_start_commit SIGNAL t2_ready2"));
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR t2_ready1";
SET DEBUG_SYNC= "now SIGNAL t1_cont1";
SET DEBUG_SYNC= "now WAIT_FOR t1_ready2";
connection server_1;
INSERT INTO t1 VALUES (52);
SET BINLOG_FORMAT= @old_format;
SELECT * FROM t2 WHERE a>=50 ORDER BY a;
a
50
SELECT * FROM t1 WHERE a>=50 ORDER BY a;
a
50
51
52
connection server_2;
SET DEBUG_SYNC= "now SIGNAL prep_cont";
SET DEBUG_SYNC= "now WAIT_FOR t3_ready";
SET DEBUG_SYNC= "now SIGNAL t2_cont1";
SET DEBUG_SYNC= "now WAIT_FOR t2_ready2";
SET DEBUG_SYNC= "now SIGNAL t1_cont2";
connection server_1;
connection server_2;
SELECT * FROM t2 WHERE a>=50 ORDER BY a;
a
50
SELECT * FROM t1 WHERE a>=50 ORDER BY a;
a
50
51
52
SET DEBUG_SYNC="reset";
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
include/start_slave.inc
*** MDEV-7326 Server deadlock in connection with parallel replication ***
connect con_temp3,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con_temp4,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connection server_2;
include/stop_slave.inc
SET @old_parallel_mode= @@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_mode='conservative';
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=3;
SET GLOBAL debug_dbug="+d,rpl_parallel_simulate_temp_err_xid";
include/start_slave.inc
connection server_1;
SET @old_format= @@SESSION.binlog_format;
SET binlog_format= STATEMENT;
INSERT INTO t1 VALUES (foo(60,
"rpl_parallel_start_waiting_for_prior SIGNAL t3_ready",
"rpl_parallel_end_of_group SIGNAL prep_ready WAIT_FOR prep_cont"));
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR prep_ready";
connection server_1;
INSERT INTO t2 VALUES (foo(60,
"rpl_parallel_simulate_temp_err_xid SIGNAL t1_ready1 WAIT_FOR t1_cont1",
"rpl_parallel_retry_after_unmark SIGNAL t1_ready2 WAIT_FOR t1_cont2"));
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR t1_ready1";
connection con_temp3;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
SET binlog_format=statement;
INSERT INTO t1 VALUES (foo(61,
"rpl_parallel_before_mark_start_commit SIGNAL t2_ready1 WAIT_FOR t2_cont1",
"rpl_parallel_after_mark_start_commit SIGNAL t2_ready2"));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con_temp4;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
INSERT INTO t6 VALUES (62);
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con_temp3;
connection con_temp4;
connection server_1;
SET debug_sync='RESET';
SET BINLOG_FORMAT= @old_format;
SELECT * FROM t2 WHERE a>=60 ORDER BY a;
a
60
SELECT * FROM t1 WHERE a>=60 ORDER BY a;
a
60
61
SELECT * FROM t6 WHERE a>=60 ORDER BY a;
a
62
connection server_2;
SET DEBUG_SYNC= "now WAIT_FOR t2_ready1";
SET DEBUG_SYNC= "now SIGNAL t1_cont1";
SET DEBUG_SYNC= "now WAIT_FOR t1_ready2";
connection server_2;
SET DEBUG_SYNC= "now SIGNAL prep_cont";
SET DEBUG_SYNC= "now WAIT_FOR t3_ready";
SET DEBUG_SYNC= "now SIGNAL t2_cont1";
SET DEBUG_SYNC= "now WAIT_FOR t2_ready2";
SET DEBUG_SYNC= "now SIGNAL t1_cont2";
connection server_1;
connection server_2;
SELECT * FROM t2 WHERE a>=60 ORDER BY a;
a
60
SELECT * FROM t1 WHERE a>=60 ORDER BY a;
a
60
61
SELECT * FROM t6 WHERE a>=60 ORDER BY a;
a
62
SET DEBUG_SYNC="reset";
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP function foo;
DROP TABLE t1,t2,t6;
disconnect con_temp3;
disconnect con_temp4;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_retry_deadlock.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_retry_deadlock.inc
mysql-test/suite/binlog_encryption/rpl_parallel_rollback_assert.result 0 → 100644
View file @ 714762dd
*** MDEV-8725: Assertion on ROLLBACK statement in the binary log ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
connection server_2;
connection server_1;
BEGIN;
INSERT INTO t2 VALUES (2000);
INSERT INTO t1 VALUES (2000);
INSERT INTO t2 VALUES (2001);
ROLLBACK;
SELECT * FROM t1 WHERE a>=2000 ORDER BY a;
a
2000
SELECT * FROM t2 WHERE a>=2000 ORDER BY a;
a
include/save_master_gtid.inc
connection server_2;
include/sync_with_master_gtid.inc
connection server_1;
INSERT INTO t2 VALUES (2020);
include/save_master_gtid.inc
connection server_2;
include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a>=2000 ORDER BY a;
a
2020
SELECT * FROM t1 WHERE a>=2000 ORDER BY a;
a
2000
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t1,t2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_rollback_assert.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_rollback_assert.inc
mysql-test/suite/binlog_encryption/rpl_parallel_single_grpcmt.result 0 → 100644
View file @ 714762dd
*** Test that group-committed transactions on the master can replicate in parallel on the slave. ***
include/master-slave.inc
[connection master]
connection server_1;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
include/stop_slave.inc
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
INSERT INTO t3 VALUES (1,1), (3,3), (5,5), (7,7);
connection server_2;
connect con_temp1,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
BEGIN;
INSERT INTO t3 VALUES (2,102);
connect con_temp2,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
BEGIN;
INSERT INTO t3 VALUES (4,104);
connect con_temp3,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
SET binlog_format=statement;
INSERT INTO t3 VALUES (2, foo(12,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued1 WAIT_FOR slave_cont1',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connect con_temp4,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
SET binlog_format=statement;
INSERT INTO t3 VALUES (4, foo(14,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued2',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
connect con_temp5,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued3';
SET binlog_format=statement;
INSERT INTO t3 VALUES (6, foo(16,
'group_commit_waiting_for_prior SIGNAL slave_queued3',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued3';
SET debug_sync='now SIGNAL master_cont1';
connection con_temp3;
connection con_temp4;
connection con_temp5;
SET debug_sync='RESET';
connection server_1;
SELECT * FROM t3 ORDER BY a;
a b
1 1
2 12
3 3
4 14
5 5
6 16
7 7
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
master-bin.000001 # Binlog_checkpoint # # master-bin.000001
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB
master-bin.000001 # Gtid # # GTID #-#-#
master-bin.000001 # Query # # use `test`; CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB
master-bin.000001 # Gtid # # BEGIN GTID #-#-#
master-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (1,1), (3,3), (5,5), (7,7)
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
master-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (2, foo(12,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued1 WAIT_FOR slave_cont1',
''))
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
master-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (4, foo(14,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued2',
''))
master-bin.000001 # Xid # # COMMIT /* XID */
master-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
master-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (6, foo(16,
'group_commit_waiting_for_prior SIGNAL slave_queued3',
''))
master-bin.000001 # Xid # # COMMIT /* XID */
connection server_2;
SET debug_sync='now WAIT_FOR slave_queued3';
connection con_temp1;
ROLLBACK;
connection server_2;
SET debug_sync='now WAIT_FOR slave_queued1';
connection con_temp2;
ROLLBACK;
connection server_2;
SET debug_sync='now WAIT_FOR slave_queued2';
SET debug_sync='now SIGNAL slave_cont1';
SELECT * FROM t3 ORDER BY a;
a b
1 1
2 12
3 3
4 14
5 5
6 16
7 7
include/show_binlog_events.inc
Log_name Pos Event_type Server_id End_log_pos Info
slave-bin.000001 # Gtid # # GTID #-#-#
slave-bin.000001 # Query # # use `test`; ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB
slave-bin.000001 # Gtid # # GTID #-#-#
slave-bin.000001 # Query # # use `test`; CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB
slave-bin.000001 # Gtid # # BEGIN GTID #-#-#
slave-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (1,1), (3,3), (5,5), (7,7)
slave-bin.000001 # Xid # # COMMIT /* XID */
slave-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
slave-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (2, foo(12,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued1 WAIT_FOR slave_cont1',
''))
slave-bin.000001 # Xid # # COMMIT /* XID */
slave-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
slave-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (4, foo(14,
'commit_after_release_LOCK_prepare_ordered SIGNAL slave_queued2',
''))
slave-bin.000001 # Xid # # COMMIT /* XID */
slave-bin.000001 # Gtid # # BEGIN GTID #-#-# cid=#
slave-bin.000001 # Query # # use `test`; INSERT INTO t3 VALUES (6, foo(16,
'group_commit_waiting_for_prior SIGNAL slave_queued3',
''))
slave-bin.000001 # Xid # # COMMIT /* XID */
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP function foo;
DROP TABLE t3;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_single_grpcmt.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_single_grpcmt.inc
mysql-test/suite/binlog_encryption/rpl_parallel_slave_bgc_kill.result 0 → 100644
View file @ 714762dd
*** Test killing slave threads at various wait points ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
SET GLOBAL slave_parallel_mode='conservative';
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
connect con_temp3,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con_temp4,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con_temp5,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
connection server_1;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
SET sql_log_bin=0;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
*** 1. Test killing transaction waiting in commit for previous transaction to commit ***
connection con_temp3;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
INSERT INTO t3 VALUES (31, foo(31,
'commit_before_prepare_ordered WAIT_FOR t2_waiting',
'commit_after_prepare_ordered SIGNAL t1_ready WAIT_FOR t1_cont'));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con_temp4;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
BEGIN;
INSERT INTO t3 VALUES (32, foo(32,
'ha_write_row_end SIGNAL t2_query WAIT_FOR t2_cont',
''));
INSERT INTO t3 VALUES (33, foo(33,
'group_commit_waiting_for_prior SIGNAL t2_waiting',
'group_commit_waiting_for_prior_killed SIGNAL t2_killed'));
COMMIT;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
connection con_temp5;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued3';
INSERT INTO t3 VALUES (34, foo(34,
'',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued3';
SET debug_sync='now SIGNAL master_cont1';
connection con_temp3;
connection con_temp4;
connection con_temp5;
connection server_1;
SELECT * FROM t3 WHERE a >= 30 ORDER BY a;
a b
31 31
32 32
33 33
34 34
SET debug_sync='RESET';
connection server_2;
SET sql_log_bin=0;
CALL mtr.add_suppression("Query execution was interrupted");
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
CALL mtr.add_suppression("Slave: Connection was killed");
SET sql_log_bin=1;
SET debug_sync='now WAIT_FOR t2_query';
SET debug_sync='now SIGNAL t2_cont';
SET debug_sync='now WAIT_FOR t1_ready';
KILL THD_ID;
SET debug_sync='now WAIT_FOR t2_killed';
SET debug_sync='now SIGNAL t1_cont';
include/wait_for_slave_sql_error.inc [errno=1317,1927,1964]
STOP SLAVE IO_THREAD;
SELECT * FROM t3 WHERE a >= 30 ORDER BY a;
a b
31 31
SET debug_sync='RESET';
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_1;
INSERT INTO t3 VALUES (39,0);
connection server_2;
include/start_slave.inc
SELECT * FROM t3 WHERE a >= 30 ORDER BY a;
a b
31 31
32 32
33 33
34 34
39 0
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
include/start_slave.inc
*** 2. Same as (1), but without restarting IO thread after kill of SQL threads ***
connection con_temp3;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
INSERT INTO t3 VALUES (41, foo(41,
'commit_before_prepare_ordered WAIT_FOR t2_waiting',
'commit_after_prepare_ordered SIGNAL t1_ready WAIT_FOR t1_cont'));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con_temp4;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
BEGIN;
INSERT INTO t3 VALUES (42, foo(42,
'ha_write_row_end SIGNAL t2_query WAIT_FOR t2_cont',
''));
INSERT INTO t3 VALUES (43, foo(43,
'group_commit_waiting_for_prior SIGNAL t2_waiting',
'group_commit_waiting_for_prior_killed SIGNAL t2_killed'));
COMMIT;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
connection con_temp5;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued3';
INSERT INTO t3 VALUES (44, foo(44,
'',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued3';
SET debug_sync='now SIGNAL master_cont1';
connection con_temp3;
connection con_temp4;
connection con_temp5;
connection server_1;
SELECT * FROM t3 WHERE a >= 40 ORDER BY a;
a b
41 41
42 42
43 43
44 44
SET debug_sync='RESET';
connection server_2;
SET debug_sync='now WAIT_FOR t2_query';
SET debug_sync='now SIGNAL t2_cont';
SET debug_sync='now WAIT_FOR t1_ready';
KILL THD_ID;
SET debug_sync='now WAIT_FOR t2_killed';
SET debug_sync='now SIGNAL t1_cont';
include/wait_for_slave_sql_error.inc [errno=1317,1927,1964]
SET debug_sync='RESET';
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_1;
INSERT INTO t3 VALUES (49,0);
connection server_2;
START SLAVE SQL_THREAD;
SELECT * FROM t3 WHERE a >= 40 ORDER BY a;
a b
41 41
42 42
43 43
44 44
49 0
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
SET sql_log_bin=1;
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
include/start_slave.inc
*** 3. Same as (2), but not using gtid mode ***
connection server_2;
include/stop_slave.inc
CHANGE MASTER TO master_use_gtid=no;
include/start_slave.inc
connection server_1;
connection con_temp3;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
INSERT INTO t3 VALUES (51, foo(51,
'commit_before_prepare_ordered WAIT_FOR t2_waiting',
'commit_after_prepare_ordered SIGNAL t1_ready WAIT_FOR t1_cont'));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con_temp4;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
BEGIN;
INSERT INTO t3 VALUES (52, foo(52,
'ha_write_row_end SIGNAL t2_query WAIT_FOR t2_cont',
''));
INSERT INTO t3 VALUES (53, foo(53,
'group_commit_waiting_for_prior SIGNAL t2_waiting',
'group_commit_waiting_for_prior_killed SIGNAL t2_killed'));
COMMIT;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
connection con_temp5;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued3';
INSERT INTO t3 VALUES (54, foo(54,
'',
''));
connection server_1;
SET debug_sync='now WAIT_FOR master_queued3';
SET debug_sync='now SIGNAL master_cont1';
connection con_temp3;
connection con_temp4;
connection con_temp5;
connection server_1;
SELECT * FROM t3 WHERE a >= 50 ORDER BY a;
a b
51 51
52 52
53 53
54 54
SET debug_sync='RESET';
connection server_2;
SET debug_sync='now WAIT_FOR t2_query';
SET debug_sync='now SIGNAL t2_cont';
SET debug_sync='now WAIT_FOR t1_ready';
KILL THD_ID;
SET debug_sync='now WAIT_FOR t2_killed';
SET debug_sync='now SIGNAL t1_cont';
include/wait_for_slave_sql_error.inc [errno=1317,1927,1964]
SELECT * FROM t3 WHERE a >= 50 ORDER BY a;
a b
51 51
SET debug_sync='RESET';
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
SET sql_log_bin=0;
DROP FUNCTION foo;
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
SET sql_log_bin=1;
connection server_1;
INSERT INTO t3 VALUES (59,0);
connection server_2;
START SLAVE SQL_THREAD;
SELECT * FROM t3 WHERE a >= 50 ORDER BY a;
a b
51 51
52 52
53 53
54 54
59 0
connection server_2;
include/stop_slave.inc
CHANGE MASTER TO master_use_gtid=slave_pos;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP function foo;
DROP TABLE t1,t2,t3;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_slave_bgc_kill.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_slave_bgc_kill.inc
mysql-test/suite/binlog_encryption/rpl_parallel_stop_on_con_kill.result 0 → 100644
View file @ 714762dd
*** MDEV-8031: Parallel replication stops on "connection killed" error (probably incorrectly handled deadlock kill) ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
INSERT INTO t3 VALUES (201,0), (202,0);
include/save_master_gtid.inc
connection server_2;
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug= '+d,inject_mdev8031';
connection server_1;
SET @old_dbug= @@SESSION.debug_dbug;
SET SESSION debug_dbug="+d,binlog_force_commit_id";
SET @commit_id= 10200;
INSERT INTO t3 VALUES (203, 1);
INSERT INTO t3 VALUES (204, 1);
INSERT INTO t3 VALUES (205, 1);
UPDATE t3 SET b=b+1 WHERE a=201;
UPDATE t3 SET b=b+1 WHERE a=201;
UPDATE t3 SET b=b+1 WHERE a=201;
UPDATE t3 SET b=b+1 WHERE a=202;
UPDATE t3 SET b=b+1 WHERE a=202;
UPDATE t3 SET b=b+1 WHERE a=202;
UPDATE t3 SET b=b+1 WHERE a=202;
UPDATE t3 SET b=b+1 WHERE a=203;
UPDATE t3 SET b=b+1 WHERE a=203;
UPDATE t3 SET b=b+1 WHERE a=204;
UPDATE t3 SET b=b+1 WHERE a=204;
UPDATE t3 SET b=b+1 WHERE a=204;
UPDATE t3 SET b=b+1 WHERE a=203;
UPDATE t3 SET b=b+1 WHERE a=205;
UPDATE t3 SET b=b+1 WHERE a=205;
SET SESSION debug_dbug=@old_dbug;
SELECT * FROM t3 WHERE a>=200 ORDER BY a;
a b
201 3
202 4
203 4
204 4
205 3
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t3 WHERE a>=200 ORDER BY a;
a b
201 3
202 4
203 4
204 4
205 3
include/stop_slave.inc
SET GLOBAL debug_dbug= @old_dbug;
include/start_slave.inc
*** Check getting deadlock killed inside open_binlog() during retry. ***
connection server_2;
include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug= '+d,inject_retry_event_group_open_binlog_kill';
SET @old_max= @@GLOBAL.max_relay_log_size;
SET GLOBAL max_relay_log_size= 4096;
connection server_1;
SET @old_dbug= @@SESSION.debug_dbug;
SET SESSION debug_dbug="+d,binlog_force_commit_id";
SET @commit_id= 10210;
Omit long queries that cause relaylog rotations and transaction retries...
SET SESSION debug_dbug=@old_dbug;
SELECT * FROM t3 WHERE a>=200 ORDER BY a;
a b
201 6
202 8
203 7
204 7
205 5
include/save_master_gtid.inc
connection server_2;
include/start_slave.inc
include/sync_with_master_gtid.inc
SELECT * FROM t3 WHERE a>=200 ORDER BY a;
a b
201 6
202 8
203 7
204 7
205 5
include/stop_slave.inc
SET GLOBAL debug_dbug= @old_debg;
SET GLOBAL max_relay_log_size= @old_max;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t3;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_stop_on_con_kill.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_stop_on_con_kill.inc
mysql-test/suite/binlog_encryption/rpl_parallel_stop_slave.result 0 → 100644
View file @ 714762dd
*** Test STOP SLAVE in parallel mode ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
SET GLOBAL slave_parallel_mode='conservative';
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connect con_temp1,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
connect con_temp2,127.0.0.1,root,,test,$SERVER_MYPORT_2,;
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
connection server_1;
SET binlog_direct_non_transactional_updates=0;
SET sql_log_bin=0;
CALL mtr.add_suppression("Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction");
SET sql_log_bin=1;
BEGIN;
INSERT INTO t2 VALUES (20);
INSERT INTO t1 VALUES (20);
INSERT INTO t2 VALUES (21);
INSERT INTO t3 VALUES (20, 20);
COMMIT;
INSERT INTO t3 VALUES(21, 21);
INSERT INTO t3 VALUES(22, 22);
connection con_temp1;
BEGIN;
INSERT INTO t2 VALUES (21);
connection server_2;
START SLAVE;
connection con_temp2;
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,rpl_parallel_wait_for_done_trigger";
STOP SLAVE;
connection con_temp1;
SET debug_sync='now WAIT_FOR wait_for_done_waiting';
ROLLBACK;
connection con_temp2;
SET GLOBAL debug_dbug=@old_dbug;
SET debug_sync='RESET';
connection server_2;
include/wait_for_slave_to_stop.inc
SELECT * FROM t1 WHERE a >= 20 ORDER BY a;
a
20
SELECT * FROM t2 WHERE a >= 20 ORDER BY a;
a
20
21
SELECT * FROM t3 WHERE a >= 20 ORDER BY a;
a b
20 20
include/start_slave.inc
SELECT * FROM t1 WHERE a >= 20 ORDER BY a;
a
20
SELECT * FROM t2 WHERE a >= 20 ORDER BY a;
a
20
21
SELECT * FROM t3 WHERE a >= 20 ORDER BY a;
a b
20 20
21 21
22 22
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
disconnect con_temp1;
disconnect con_temp2;
connection server_1;
DROP TABLE t1,t2,t3;
SET DEBUG_SYNC= 'RESET';
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_stop_slave.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_stop_slave.inc
mysql-test/suite/binlog_encryption/rpl_parallel_wrong_binlog_order.result 0 → 100644
View file @ 714762dd
*** MDEV-6775: Wrong binlog order in parallel replication ***
include/master-slave.inc
[connection master]
connection server_2;
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t4 (a INT PRIMARY KEY, b INT, KEY b_idx(b)) ENGINE=InnoDB;
INSERT INTO t4 VALUES (1,NULL), (3,NULL), (4,4), (5, NULL), (6, 6);
connect con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
connect con2,127.0.0.1,root,,test,$SERVER_MYPORT_1,;
include/save_master_gtid.inc
connection server_2;
include/sync_with_master_gtid.inc
include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,inject_binlog_commit_before_get_LOCK_log";
SET @old_format=@@GLOBAL.binlog_format;
SET GLOBAL binlog_format=ROW;
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
connection con1;
SET @old_format= @@binlog_format;
SET binlog_format= statement;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
UPDATE t4 SET b=NULL WHERE a=6;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued1';
connection con2;
SET @old_format= @@binlog_format;
SET binlog_format= statement;
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
DELETE FROM t4 WHERE b <= 3;
connection server_1;
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
connection con1;
SET binlog_format= @old_format;
connection con2;
SET binlog_format= @old_format;
SET debug_sync='RESET';
SELECT * FROM t4 ORDER BY a;
a b
1 NULL
3 NULL
4 4
5 NULL
6 NULL
connection server_2;
include/start_slave.inc
SET debug_sync= 'now WAIT_FOR waiting';
SELECT * FROM t4 ORDER BY a;
a b
1 NULL
3 NULL
4 4
5 NULL
6 NULL
SET debug_sync= 'now SIGNAL cont';
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL binlog_format= @old_format;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
DROP TABLE t4;
SET DEBUG_SYNC= 'RESET';
disconnect con1;
disconnect con2;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_wrong_binlog_order.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_wrong_binlog_order.inc
mysql-test/suite/binlog_encryption/rpl_parallel_wrong_exec_master_pos.result 0 → 100644
View file @ 714762dd
*** MDEV-5938: Exec_master_log_pos not updated at log rotate in parallel replication ***
include/master-slave.inc
[connection master]
connection server_2;
include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=1;
CHANGE MASTER TO master_use_gtid=slave_pos;
include/start_slave.inc
connection server_1;
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t5 (a INT PRIMARY KEY, b INT);
INSERT INTO t5 VALUES (1,1);
INSERT INTO t5 VALUES (2,2), (3,8);
INSERT INTO t5 VALUES (4,16);
connection server_2;
test_check
OK
test_check
OK
connection server_1;
FLUSH LOGS;
connection server_2;
test_check
OK
test_check
OK
connection server_2;
include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
include/start_slave.inc
connection server_1;
DROP TABLE t5;
include/rpl_end.inc
mysql-test/suite/binlog_encryption/rpl_parallel_wrong_exec_master_pos.test 0 → 100644
View file @ 714762dd
--source suite/rpl/include/rpl_parallel_wrong_exec_master_pos.inc
mysql-test/suite/multi_source/info_logs.result
View file @ 714762dd
......@@ -90,16 +90,16 @@ MASTER 2.2
#
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> relay.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
MASTER 2.2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> relay-master@00202@002e2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space2> None 0 No 0 No 0 0 2 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> relay.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
MASTER 2.2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> relay-master@00202@002e2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space2> None 0 No 0 No 0 0 2 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
include/wait_for_slave_to_start.inc
set default_master_connection = 'MASTER 2.2';
include/wait_for_slave_to_start.inc
set default_master_connection = '';
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> relay.000004 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 6 0 60.000
MASTER 2.2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> relay-master@00202@002e2.000004 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space2> None 0 No 0 No 0 0 2 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 6 0 60.000
Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> relay.000004 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 6 0 60.000
MASTER 2.2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> relay-master@00202@002e2.000004 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space2> None 0 No 0 No 0 0 2 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 6 0 60.000
#
# List of files matching '*info*' pattern
# after slave server restart
......
mysql-test/suite/multi_source/reset_slave.result
View file @ 714762dd
......@@ -14,14 +14,14 @@ connection slave;
stop slave 'master1';
show slave 'master1' status;
Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups
127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-master1.000002 <relay_log_pos> master-bin.000001 No No 0 0 <read_master_log_pos> <relay_log_space> None 0 No NULL No 0 0 1 No conservative 0 NULL 2 1 0
127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-master1.000002 <relay_log_pos> master-bin.000001 No No 0 0 <read_master_log_pos> <relay_log_space> None 0 No NULL No 0 0 1 No optimistic 0 NULL 2 1 0
mysqld-relay-bin-master1.000001
mysqld-relay-bin-master1.000002
mysqld-relay-bin-master1.index
reset slave 'master1';
show slave 'master1' status;
Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups
127.0.0.1 root MYPORT_1 60 4 <relay_log_pos> No No 0 0 0 <relay_log_space> None 0 No NULL No 0 0 1 No conservative 0 NULL 2 1 0
127.0.0.1 root MYPORT_1 60 4 <relay_log_pos> No No 0 0 0 <relay_log_space> None 0 No NULL No 0 0 1 No optimistic 0 NULL 2 1 0
reset slave 'master1' all;
show slave 'master1' status;
ERROR HY000: There is no master connection 'master1'
......
mysql-test/suite/multi_source/simple.result
View file @ 714762dd
......@@ -19,8 +19,8 @@ connection master2;
connection slave;
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
slave1 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave1.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
slave1 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_1 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave1.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 1 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
start all slaves;
stop slave 'slave1';
show slave 'slave1' status;
......@@ -70,7 +70,7 @@ Using_Gtid No
Gtid_IO_Pos
Replicate_Do_Domain_Ids
Replicate_Ignore_Domain_Ids
Parallel_Mode conservative
Parallel_Mode optimistic
SQL_Delay 0
SQL_Remaining_Delay NULL
Slave_SQL_Running_State
......@@ -80,18 +80,18 @@ Slave_Transactional_Groups 0
reset slave 'slave1';
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
slave1 127.0.0.1 root MYPORT_1 60 4 <relay_log_pos> No No 0 0 0 <relay_log_space1> None 0 No NULL No 0 0 1 No conservative 0 NULL 0 0 0 0 1073741824 7 0 60.000
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
slave1 127.0.0.1 root MYPORT_1 60 4 <relay_log_pos> No No 0 0 0 <relay_log_space1> None 0 No NULL No 0 0 1 No optimistic 0 NULL 0 0 0 0 1073741824 7 0 60.000
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
reset slave 'slave1' all;
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No conservative 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
slave2 Slave has read all relay log; waiting for the slave I/O thread to update it Waiting for master to send event 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 Yes Yes 0 0 <read_master_log_pos> <relay_log_space1> None 0 No 0 No 0 0 2 No optimistic 0 NULL Slave has read all relay log; waiting for the slave I/O thread to update it 0 0 0 0 1073741824 7 0 60.000
stop all slaves;
Warnings:
Note 1938 SLAVE 'slave2' stopped
show all slaves status;
Connection_name Slave_SQL_State Slave_IO_State Master_Host Master_User Master_Port Connect_Retry Master_Log_File Read_Master_Log_Pos Relay_Log_File Relay_Log_Pos Relay_Master_Log_File Slave_IO_Running Slave_SQL_Running Replicate_Do_DB Replicate_Ignore_DB Replicate_Do_Table Replicate_Ignore_Table Replicate_Wild_Do_Table Replicate_Wild_Ignore_Table Last_Errno Last_Error Skip_Counter Exec_Master_Log_Pos Relay_Log_Space Until_Condition Until_Log_File Until_Log_Pos Master_SSL_Allowed Master_SSL_CA_File Master_SSL_CA_Path Master_SSL_Cert Master_SSL_Cipher Master_SSL_Key Seconds_Behind_Master Master_SSL_Verify_Server_Cert Last_IO_Errno Last_IO_Error Last_SQL_Errno Last_SQL_Error Replicate_Ignore_Server_Ids Master_Server_Id Master_SSL_Crl Master_SSL_Crlpath Using_Gtid Gtid_IO_Pos Replicate_Do_Domain_Ids Replicate_Ignore_Domain_Ids Parallel_Mode SQL_Delay SQL_Remaining_Delay Slave_SQL_Running_State Slave_DDL_Groups Slave_Non_Transactional_Groups Slave_Transactional_Groups Retried_transactions Max_relay_log_size Executed_log_entries Slave_received_heartbeats Slave_heartbeat_period Gtid_Slave_Pos
slave2 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 No No 0 0 <read_master_log_pos> <relay_log_space1> None 0 No NULL No 0 0 2 No conservative 0 NULL 0 0 0 0 1073741824 7 0 60.000
slave2 127.0.0.1 root MYPORT_2 60 master-bin.000001 <read_master_log_pos> mysqld-relay-bin-slave2.000002 <relay_log_pos> master-bin.000001 No No 0 0 <read_master_log_pos> <relay_log_space1> None 0 No NULL No 0 0 2 No optimistic 0 NULL 0 0 0 0 1073741824 7 0 60.000
stop all slaves;
include/reset_master_slave.inc
disconnect slave;
......
mysql-test/suite/rpl/include/rpl_parallel.inc deleted 100644 → 0
View file @ 7e10e80b
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_analyze_table_hang.inc 0 → 100644
View file @ 714762dd
--echo *** MDEV-7888: ANALYZE TABLE does wakeup_subsequent_commits(), causing wrong binlog order and parallel replication hang ***
--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/master-slave.inc
--connection server_2
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
--source include/stop_slave.inc
SET GLOBAL slave_parallel_mode='conservative';
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
--save_master_pos
--connection server_2
--sync_with_master
--source include/stop_slave.inc
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug= '+d,inject_analyze_table_sleep';
--connection server_1
# Inject two group commits. The bug was that ANALYZE TABLE would call
# wakeup_subsequent_commits() too early, allowing the following transaction
# in the same group to run ahead and binlog and free the GCO. Then we get
# wrong binlog order and later access freed GCO, which causes lost wakeup
# of following GCO and thus replication hang.
# We injected a small sleep in ANALYZE to make the race easier to hit (this
# can only cause false negatives in versions with the bug, not false positives,
# so sleep is ok here. And it's in general not possible to trigger reliably
# the race with debug_sync, since the bugfix makes the race impossible).
SET @old_dbug= @@SESSION.debug_dbug;
SET SESSION debug_dbug="+d,binlog_force_commit_id";
# Group commit with cid=10000, two event groups.
SET @commit_id= 10000;
ANALYZE TABLE t2;
INSERT INTO t3 VALUES (120, 0);
# Group commit with cid=10001, one event group.
SET @commit_id= 10001;
INSERT INTO t3 VALUES (121, 0);
SET SESSION debug_dbug=@old_dbug;
SELECT * FROM t3 WHERE a >= 120 ORDER BY a;
--source include/save_master_gtid.inc
--connection server_2
--source include/start_slave.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t3 WHERE a >= 120 ORDER BY a;
# Clean up.
--source include/stop_slave.inc
SET GLOBAL debug_dbug= @old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
--source include/start_slave.inc
--connection server_1
DROP TABLE t2,t3;
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_deadlock_corrupt_binlog.inc 0 → 100644
View file @ 714762dd
--echo *** MDEV-7335: Potential parallel slave deadlock with specific binlog corruption ***
--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/master-slave.inc
--connection server_2
--source include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
--save_master_pos
--connection server_2
--sync_with_master
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=1;
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,slave_discard_xid_for_gtid_0_x_1000";
--connection server_1
INSERT INTO t2 VALUES (101);
INSERT INTO t2 VALUES (102);
INSERT INTO t2 VALUES (103);
INSERT INTO t2 VALUES (104);
INSERT INTO t2 VALUES (105);
# Inject a partial event group (missing XID at the end). The bug was that such
# partial group was not handled appropriately, leading to server deadlock.
SET gtid_seq_no=1000;
INSERT INTO t2 VALUES (106);
INSERT INTO t2 VALUES (107);
INSERT INTO t2 VALUES (108);
INSERT INTO t2 VALUES (109);
INSERT INTO t2 VALUES (110);
INSERT INTO t2 VALUES (111);
INSERT INTO t2 VALUES (112);
INSERT INTO t2 VALUES (113);
INSERT INTO t2 VALUES (114);
INSERT INTO t2 VALUES (115);
INSERT INTO t2 VALUES (116);
INSERT INTO t2 VALUES (117);
INSERT INTO t2 VALUES (118);
INSERT INTO t2 VALUES (119);
INSERT INTO t2 VALUES (120);
INSERT INTO t2 VALUES (121);
INSERT INTO t2 VALUES (122);
INSERT INTO t2 VALUES (123);
INSERT INTO t2 VALUES (124);
INSERT INTO t2 VALUES (125);
INSERT INTO t2 VALUES (126);
INSERT INTO t2 VALUES (127);
INSERT INTO t2 VALUES (128);
INSERT INTO t2 VALUES (129);
INSERT INTO t2 VALUES (130);
--source include/save_master_gtid.inc
--connection server_2
--source include/start_slave.inc
--source include/sync_with_master_gtid.inc
# The partial event group (a=106) should be rolled back and thus missing.
SELECT * FROM t2 WHERE a >= 100 ORDER BY a;
# Cleanup
--source include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
--connection server_1
DROP TABLE t2;
SET DEBUG_SYNC= 'RESET';
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_domain.inc 0 → 100644
View file @ 714762dd
# Test should work with both conservative and optimistic modes
--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/master-slave.inc
# Test various aspects of parallel replication.
--connection server_2
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
--error ER_SLAVE_MUST_STOP
SET GLOBAL slave_parallel_threads=10;
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
# Check that we do not spawn any worker threads when no slave is running.
SELECT IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
# Check that worker threads get spawned when slave starts.
SELECT IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
# ... and that worker threads get removed when slave stops.
--source include/stop_slave.inc
SELECT IF(COUNT(*) < 10, "OK", CONCAT("Found too many system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
--source include/start_slave.inc
SELECT IF(COUNT(*) >= 10, "OK", CONCAT("Found too few system user processes: ", COUNT(*))) FROM information_schema.processlist WHERE user = "system user";
--echo *** Test long-running query in domain 1 can run in parallel with short queries in domain 0 ***
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1);
INSERT INTO t2 VALUES (1);
--save_master_pos
--connection server_2
--sync_with_master
# Block the table t1 to simulate a replicated query taking a long time.
--connect (con_temp1,127.0.0.1,root,,test,$SERVER_MYPORT_2,)
LOCK TABLE t1 WRITE;
--connection server_1
SET gtid_domain_id=1;
# This query will be blocked on the slave until UNLOCK TABLES.
INSERT INTO t1 VALUES (2);
SET gtid_domain_id=0;
# These t2 queries can be replicated in parallel with the prior t1 query, as
# they are in a separate replication domain.
INSERT INTO t2 VALUES (2);
INSERT INTO t2 VALUES (3);
BEGIN;
INSERT INTO t2 VALUES (4);
INSERT INTO t2 VALUES (5);
COMMIT;
INSERT INTO t2 VALUES (6);
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 6 FROM t2
--source include/wait_condition.inc
SELECT * FROM t2 ORDER by a;
--connection con_temp1
SELECT * FROM t1;
UNLOCK TABLES;
--connection server_2
--let $wait_condition= SELECT COUNT(*) = 2 FROM t1
--source include/wait_condition.inc
SELECT * FROM t1 ORDER BY a;
# Clean up.
--connection server_2
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc
--connection server_1
DROP TABLE t1,t2;
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_domain_slave_single_grp.inc 0 → 100644
View file @ 714762dd
# Test is independent of slave_parallel_mode
--echo *** Test two transactions in different domains committed in opposite order on slave but in a single group commit. ***
--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
--source include/master-slave.inc
# Test various aspects of parallel replication.
--connection server_2
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t1 (a int PRIMARY KEY) ENGINE=MyISAM;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
INSERT INTO t1 VALUES (1);
INSERT INTO t2 VALUES (1);
--save_master_pos
--connection server_2
--sync_with_master
--source include/stop_slave.inc
--connection server_1
# Use a stored function to inject a debug_sync into the appropriate THD.
# The function does nothing on the master, and on the slave it injects the
# desired debug_sync action(s).
SET sql_log_bin=0;
--delimiter ||
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
RETURN x;
END
||
--delimiter ;
SET sql_log_bin=1;
SET @old_format= @@SESSION.binlog_format;
SET binlog_format='statement';
SET gtid_domain_id=1;
INSERT INTO t2 VALUES (foo(10,
'commit_before_enqueue SIGNAL ready1 WAIT_FOR cont1',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready2'));
--connection server_2
FLUSH LOGS;
--source include/wait_for_binlog_checkpoint.inc
SET sql_log_bin=0;
--delimiter ||
CREATE FUNCTION foo(x INT, d1 VARCHAR(500), d2 VARCHAR(500))
RETURNS INT DETERMINISTIC
BEGIN
IF d1 != '' THEN
SET debug_sync = d1;
END IF;
IF d2 != '' THEN
SET debug_sync = d2;
END IF;
RETURN x;
END
||
--delimiter ;
SET sql_log_bin=1;
SET @old_format=@@GLOBAL.binlog_format;
SET GLOBAL binlog_format=statement;
# We need to restart all parallel threads for the new global setting to
# be copied to the session-level values.
SET GLOBAL slave_parallel_threads=0;
SET GLOBAL slave_parallel_threads=10;
--source include/start_slave.inc
# First make sure the first insert is ready to commit, but not queued yet.
SET debug_sync='now WAIT_FOR ready1';
--connection server_1
SET gtid_domain_id=2;
INSERT INTO t2 VALUES (foo(11,
'commit_before_enqueue SIGNAL ready3 WAIT_FOR cont3',
'commit_after_release_LOCK_prepare_ordered SIGNAL ready4 WAIT_FOR cont4'));
SET gtid_domain_id=0;
SELECT * FROM t2 WHERE a >= 10 ORDER BY a;
--connection server_2
# Now wait for the second insert to queue itself as the leader, and then
# wait for more commits to queue up.
SET debug_sync='now WAIT_FOR ready3';
SET debug_sync='now SIGNAL cont3';
SET debug_sync='now WAIT_FOR ready4';
# Now allow the first insert to queue up to participate in group commit.
SET debug_sync='now SIGNAL cont1';
SET debug_sync='now WAIT_FOR ready2';
# Finally allow the second insert to proceed and do the group commit.
SET debug_sync='now SIGNAL cont4';
--let $wait_condition= SELECT COUNT(*) = 2 FROM t2 WHERE a >= 10
--source include/wait_condition.inc
SELECT * FROM t2 WHERE a >= 10 ORDER BY a;
# The two INSERT transactions should have been committed in opposite order,
# but in the same group commit (seen by precense of cid=# in the SHOW
# BINLOG output).
--let $binlog_file= slave-bin.000002
--source include/show_binlog_events.inc
FLUSH LOGS;
--source include/wait_for_binlog_checkpoint.inc
# Clean up.
--connection server_2
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
SET GLOBAL binlog_format=@old_format;
--connection server_1
DROP function foo;
DROP TABLE t1,t2;
SET DEBUG_SYNC= 'RESET';
SET GLOBAL binlog_format=@old_format;
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_free_deferred_event.inc 0 → 100644
View file @ 714762dd
--echo *** MDEV-5788 Incorrect free of rgi->deferred_events in parallel replication ***
--source include/have_innodb.inc
--source include/master-slave.inc
--connection server_2
--source include/stop_slave.inc
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t3 (a INT PRIMARY KEY, b INT) ENGINE=InnoDB;
--save_master_pos
--connection server_2
--sync_with_master
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
# Use just two worker threads, so we are sure to get the rpl_group_info added
# to the free list, which is what triggered the bug.
--source include/stop_slave.inc
SET GLOBAL replicate_ignore_table="test.t3";
SET GLOBAL slave_parallel_threads=2;
--source include/start_slave.inc
--connection server_1
INSERT INTO t3 VALUES (100, rand());
INSERT INTO t3 VALUES (101, rand());
--save_master_pos
--connection server_2
--sync_with_master
--connection server_1
INSERT INTO t3 VALUES (102, rand());
INSERT INTO t3 VALUES (103, rand());
INSERT INTO t3 VALUES (104, rand());
INSERT INTO t3 VALUES (105, rand());
--save_master_pos
--connection server_2
--sync_with_master
--source include/stop_slave.inc
SET GLOBAL replicate_ignore_table="";
--source include/start_slave.inc
--connection server_1
INSERT INTO t3 VALUES (106, rand());
INSERT INTO t3 VALUES (107, rand());
--save_master_pos
--connection server_2
--sync_with_master
--replace_column 2 #
SELECT * FROM t3 WHERE a >= 100 ORDER BY a;
# Clean up.
--connection server_2
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc
--connection server_1
DROP TABLE t3;
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_gco_wait_kill.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_gtid_slave_pos_update_fail.inc 0 → 100644
View file @ 714762dd
# MDEV-6549, failing to update gtid_slave_pos for a transaction that was retried.
# The problem was that when a transaction updates the mysql.gtid_slave_pos
# table, it clears the flag that marks that there is a GTID position that
# needs to be updated. Then, if the transaction got killed after that due
# to a deadlock, the subsequent retry would fail to notice that the GTID needs
# to be recorded in gtid_slave_pos.
#
# (In the original bug report, the symptom was an assertion; this was however
# just a side effect of the missing update of gtid_slave_pos, which also
# happened to cause a missing clear of OPTION_GTID_BEGIN).
--source include/have_innodb.inc
--source include/have_debug.inc
--source include/have_debug_sync.inc
# Must use statement-based binlogging. Otherwise the transaction will not be
# binlogged at all, as it modifies no rows.
--source include/have_binlog_format_statement.inc
--source include/master-slave.inc
--connection server_2
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=10;
CHANGE MASTER TO master_use_gtid=slave_pos;
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t4 (a INT PRIMARY KEY, b INT, KEY b_idx(b)) ENGINE=InnoDB;
INSERT INTO t4 VALUES (1,NULL), (2,2), (3,NULL), (4,4), (5, NULL), (6, 6);
--connect (con1,127.0.0.1,root,,test,$SERVER_MYPORT_1,)
--connect (con2,127.0.0.1,root,,test,$SERVER_MYPORT_1,)
--save_master_pos
--connection server_2
--sync_with_master
--source include/stop_slave.inc
# Create two transactions that can run in parallel on the slave but cause
# a deadlock if the second runs before the first.
--connection con1
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued1 WAIT_FOR master_cont1';
send UPDATE t4 SET b=NULL WHERE a=6;
--connection server_1
SET debug_sync='now WAIT_FOR master_queued1';
--connection con2
SET debug_sync='commit_after_release_LOCK_prepare_ordered SIGNAL master_queued2';
send DELETE FROM t4 WHERE b <= 1;
--connection server_1
SET debug_sync='now WAIT_FOR master_queued2';
SET debug_sync='now SIGNAL master_cont1';
--connection con1
REAP;
--connection con2
REAP;
SET debug_sync='RESET';
--save_master_pos
--let $last_gtid= `SELECT @@last_gtid`
--connection server_2
# Disable the usual skip of gap locks for transactions that are run in
# parallel, using DBUG. This allows the deadlock to occur, and this in turn
# triggers a retry of the second transaction, and the code that was buggy and
# caused the gtid_slave_pos update to be skipped in the retry.
SET @old_dbug= @@GLOBAL.debug_dbug;
SET GLOBAL debug_dbug="+d,disable_thd_need_ordering_with";
--source include/start_slave.inc
--sync_with_master
SET GLOBAL debug_dbug=@old_dbug;
SELECT * FROM t4 ORDER BY a;
# Check that the GTID of the second transaction was correctly recorded in
# gtid_slave_pos, in the variable as well as in the table.
--replace_result $last_gtid GTID
eval SET @last_gtid= '$last_gtid';
SELECT IF(@@gtid_slave_pos LIKE CONCAT('%',@last_gtid,'%'), "GTID found ok",
CONCAT("GTID ", @last_gtid, " not found in gtid_slave_pos=", @@gtid_slave_pos))
AS result;
SELECT "ROW FOUND" AS `Is the row found?`
FROM mysql.gtid_slave_pos
WHERE CONCAT(domain_id, "-", server_id, "-", seq_no) = @last_gtid;
# Clean up.
--connection server_2
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
--source include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
--connection server_1
DROP TABLE t4;
SET DEBUG_SYNC= 'RESET';
--disconnect con1
--disconnect con2
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_ignore_error_on_rotate.inc 0 → 100644
View file @ 714762dd
--echo *** MDEV-6551: Some replication errors are ignored if slave_parallel_threads > 0 ***
--source include/have_innodb.inc
--source include/have_binlog_format_statement.inc
--source include/master-slave.inc
--connection server_2
--source include/stop_slave.inc
SET @old_parallel_threads=@@GLOBAL.slave_parallel_threads;
SET @old_parallel_mode=@@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_threads=1;
CHANGE MASTER TO master_use_gtid=slave_pos;
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
--source include/start_slave.inc
--connection server_1
ALTER TABLE mysql.gtid_slave_pos ENGINE=InnoDB;
CREATE TABLE t2 (a int PRIMARY KEY) ENGINE=InnoDB;
SET gtid_domain_id=1;
INSERT INTO t2 VALUES (1);
SET gtid_domain_id=0;
SET gtid_domain_id=2;
INSERT INTO t2 VALUES (2);
SET gtid_domain_id=0;
INSERT INTO t2 VALUES (31);
--let $gtid1= `SELECT @@LAST_GTID`
--source include/save_master_gtid.inc
--connection server_2
--source include/sync_with_master_gtid.inc
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads= 0;
--source include/start_slave.inc
# Force a duplicate key error on the slave.
SET sql_log_bin= 0;
INSERT INTO t2 VALUES (32);
SET sql_log_bin= 1;
--connection server_1
INSERT INTO t2 VALUES (32);
--let $gtid2= `SELECT @@LAST_GTID`
# Rotate the binlog; the bug is triggered when the master binlog file changes
# after the event group that causes the duplicate key error.
FLUSH LOGS;
INSERT INTO t2 VALUES (33);
INSERT INTO t2 VALUES (34);
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
--source include/save_master_gtid.inc
--connection server_2
--let $slave_sql_errno= 1062
--source include/wait_for_slave_sql_error.inc
--connection server_2
--source include/stop_slave_io.inc
SET GLOBAL slave_parallel_threads=10;
START SLAVE;
--let $slave_sql_errno= 1062
--source include/wait_for_slave_sql_error.inc
# Note: IO thread is still running at this point.
# The bug seems to have been that restarting the SQL thread after an error with
# the IO thread still running, somehow picks up a later relay log position and
# thus ends up skipping the failing event, rather than re-executing.
START SLAVE SQL_THREAD;
--let $slave_sql_errno= 1062
--source include/wait_for_slave_sql_error.inc
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
# Skip the duplicate error, so we can proceed.
--error ER_SLAVE_SKIP_NOT_IN_GTID
SET sql_slave_skip_counter= 1;
--source include/stop_slave_io.inc
--disable_query_log
eval SET GLOBAL gtid_slave_pos = REPLACE(@@gtid_slave_pos, "$gtid1", "$gtid2");
--enable_query_log
--source include/start_slave.inc
--source include/sync_with_master_gtid.inc
SELECT * FROM t2 WHERE a >= 30 ORDER BY a;
# Clean up.
--connection server_2
--source include/stop_slave.inc
SET GLOBAL slave_parallel_threads=@old_parallel_threads;
SET GLOBAL slave_parallel_mode=@old_parallel_mode;
--source include/start_slave.inc
--connection server_1
DROP TABLE t2;
--source include/rpl_end.inc
mysql-test/suite/rpl/include/rpl_parallel_mode.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_retry_deadlock.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_rollback_assert.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_single_grpcmt.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_slave_bgc_kill.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_stop_on_con_kill.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/include/rpl_parallel_stop_slave.inc 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_delayed_slave.result
View file @ 714762dd
......@@ -185,7 +185,7 @@ DROP FUNCTION delay_on_slave;
connection slave;
SELECT @@GLOBAL.slave_parallel_mode;
@@GLOBAL.slave_parallel_mode
conservative
optimistic
SELECT @@GLOBAL.slave_parallel_threads;
@@GLOBAL.slave_parallel_threads
0
......
mysql-test/suite/rpl/r/rpl_mdev6386.result
View file @ 714762dd
......@@ -7,6 +7,7 @@ connection slave;
connection slave;
include/stop_slave.inc
SET sql_log_bin= 0;
CALL mtr.add_suppression("Commit failed due to failure of an earlier commit on which this one depends");
INSERT INTO t1 VALUES (1, 2);
SET sql_log_bin= 1;
CHANGE MASTER TO master_use_gtid= current_pos;
......
mysql-test/suite/rpl/r/rpl_parallel.result deleted 100644 → 0
View file @ 7e10e80b
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_analyze_table_hang.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_conflicts.result
View file @ 714762dd
......@@ -8,6 +8,12 @@ CREATE TABLE t7 (a int PRIMARY KEY, b INT) ENGINE=InnoDB;
CREATE TABLE t8 (a int PRIMARY KEY, b INT) ENGINE=InnoDB;
connection server_2;
include/stop_slave.inc
SET @old_mode= @@GLOBAL.slave_parallel_mode;
SET GLOBAL slave_parallel_mode='conservative';
SET @old_threads= @@GLOBAL.slave_parallel_threads;
SET GLOBAL slave_parallel_threads=40;
SET @old_transaction_retries= @@GLOBAL.slave_transaction_retries;
SET GLOBAL slave_transaction_retries=5;
connection server_1;
INSERT INTO t7 VALUES (1,1), (2,2), (3,3), (4,4), (5,5);
SET @old_dbug= @@SESSION.debug_dbug;
......@@ -325,6 +331,9 @@ a b
104 4
include/stop_slave.inc
SET GLOBAL debug_dbug=@old_dbug;
SET GLOBAL slave_parallel_mode=@old_mode;
SET GLOBAL slave_parallel_threads=@old_threads;
SET GLOBAL slave_transaction_retries=@old_transaction_retries;
include/start_slave.inc
SET DEBUG_SYNC= 'RESET';
connection server_1;
......
mysql-test/suite/rpl/r/rpl_parallel_domain.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_free_deferred_event.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_gco_wait_kill.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_incorrect_relay_pos.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_mode.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_record_gtid_wakeup.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_retry_deadlock.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_rollback_assert.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_single_grpcmt.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_slave_bgc_kill.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_stop_on_con_kill.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_stop_slave.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/r/rpl_parallel_wrong_binlog_order.result 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_mdev6386.test
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel.test deleted 100644 → 0
View file @ 7e10e80b
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_analyze_table_hang.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_domain.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_free_deferred_event.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_gco_wait_kill.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_incorrect_relay_pos.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_innodb_lock_conflict.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_missed_error_handling.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_mode.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_partial_binlog_trans.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_record_gtid_wakeup.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_retry_deadlock.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_rollback_assert.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_single_grpcmt.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_slave_bgc_kill.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_stop_on_con_kill.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_stop_slave.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_wrong_binlog_order.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
mysql-test/suite/rpl/t/rpl_parallel_wrong_exec_master_pos.test 0 → 100644
View file @ 714762dd
This diff is collapsed.
sql/mysqld.cc
View file @ 714762dd
This diff is collapsed.
sql/rpl_filter.cc
View file @ 714762dd
This diff is collapsed.
sql/sys_vars.cc
View file @ 714762dd
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7