BUG#39934: Slave stops for engine that only support row-based logging

Post-push fix.
Problem: After the original bugfix, if a statement is unsafe,
binlog_format=mixed, and engine is statement-only, a warning was
generated and the statement executed. However, it is a fundamental
principle of binlogging that binlog_format=mixed should guarantee
correct logging, no compromise. So correct behavior is to generate
an error and don't execute the statement.
Fix: Generate error instead of warning.
Since issue_unsafe_warnings can only generate one error message,
this allows us to simplify the code a bit too:
decide_logging_format does not have to save the error code for
issue_unsafe_warnings

mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result

@@ -13,10 +13,10 @@ master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (300)
 master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
 insert delayed into t1 values (null),(null),(400),(null);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_stm_ps.result

@@ -11,7 +11,7 @@ prepare s from "insert into t1 select 100 limit ?";
 set @a=100;
 execute s using @a;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int)

mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result

@@ -4,10 +4,10 @@ CREATE TABLE t1 (a int, b int, primary key (a));
 INSERT INTO t1 VALUES (1,2), (2,3);
 UPDATE t1 SET b='4' WHERE a=1 LIMIT 1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 UPDATE t1 SET b='5' WHERE a=2 ORDER BY a LIMIT 1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 DROP TABLE t1;
 ### NOT filtered database => assertion: binlog disabled and warnings ARE NOT shown
 SET SQL_LOG_BIN= 0;
@@ -38,11 +38,11 @@ CREATE TABLE t1 (a VARCHAR(36), b VARCHAR(10));
 SET GLOBAL LOG_WARNINGS = 0;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 SET GLOBAL LOG_WARNINGS = 1;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 DROP TABLE t1;
 SET GLOBAL log_warnings = @old_log_warnings;
 # Count the number of times the "Unsafe" message was printed

mysql-test/suite/rpl/r/rpl_stm_found_rows.result

@@ -52,8 +52,8 @@ a
 a
 7
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 CREATE PROCEDURE just_log(sect INT, test INT, found_rows INT) BEGIN
 INSERT INTO logtbl VALUES (sect,test,found_rows);
 END $$

mysql-test/suite/rpl/r/rpl_stm_loadfile.result

@@ -10,7 +10,7 @@ CREATE TABLE test.t1 (a INT, blob_column LONGBLOB, PRIMARY KEY(a));
 INSERT INTO test.t1  VALUES(1,'test');
 UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 create procedure test.p1()
 begin
 INSERT INTO test.t1  VALUES(2,'test');
@@ -18,7 +18,7 @@ UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=2;
 end|
 CALL test.p1();
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 SELECT * FROM test.t1 ORDER BY blob_column;
 a	blob_column
 1	abase

mysql-test/suite/rpl_ndb/r/rpl_ndb_binlog_format_errors.result

@@ -16,6 +16,10 @@ CREATE TABLE t_self_logging (a VARCHAR(100)) ENGINE = NDB;
 CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
 CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
 CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
+CREATE TABLE t_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
+CREATE TABLE t_double_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
+CREATE TRIGGER trig_autoinc BEFORE INSERT ON t_autoinc FOR EACH ROW BEGIN INSERT INTO t_stmt VALUES ('x'); END;
+CREATE TRIGGER trig_double_autoinc BEFORE INSERT ON t_double_autoinc FOR EACH ROW BEGIN INSERT INTO t_autoinc VALUES (NULL); END;
 CREATE DATABASE other;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 [on slave]
@@ -64,8 +68,10 @@ SET @@global.binlog_format = MIXED;
 SET @@session.binlog_format = MIXED;
 * Unsafe statement and stmt-only engine
 INSERT INTO t_stmt VALUES (UUID());
-Warnings:
-Note	1641	Unsafe statement binlogged as statement since storage engine is limited to statement-logging. Reason: Statement uses a system function whose value may differ on slave.
+ERROR HY000: Cannot execute statement: binlogging of unsafe statement is impossible when storage engine is limited to statement-logging and BINLOG_FORMAT = MIXED.  Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+* Multi-unsafe statement and stmt-only engine
+INSERT DELAYED INTO t_double_autoinc SELECT CONCAT(UUID(), @@hostname, myfunc_int(), NULL) FROM mysql.general_log LIMIT 1;
+ERROR HY000: Cannot execute statement: binlogging of unsafe statement is impossible when storage engine is limited to statement-logging and BINLOG_FORMAT = MIXED.  Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 ---- binlog_format=statement ----
 [on slave]
 include/stop_slave.inc
@@ -102,7 +108,7 @@ USE test;
 * Unsafe statement and binlog_format=statement
 INSERT INTO t VALUES (UUID());
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
 * Same statement, but db filtered out - no message
 USE other;
 INSERT INTO test.t VALUES (UUID());
@@ -119,7 +125,7 @@ set global sql_slave_skip_counter=1;
 include/start_slave.inc
 [on master]
 ==== Clean up ====
-DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt;
+DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt, t_autoinc, t_double_autoinc;
 DROP DATABASE other;
 SET @@global.binlog_format = @old_binlog_format;
 SET @@session.binlog_format = @old_binlog_format;

mysql-test/suite/rpl_ndb/t/rpl_ndb_binlog_format_errors.test

@@ -51,6 +51,11 @@ CREATE TABLE t_self_logging (a VARCHAR(100)) ENGINE = NDB;
 CREATE TABLE t_row (a VARCHAR(100)) ENGINE = INNODB;
 CREATE TABLE t_stmt (a VARCHAR(100)) ENGINE = EXAMPLE;
 CREATE TABLE t_slave_stmt (a VARCHAR(100)) ENGINE = MYISAM;
+CREATE TABLE t_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
+CREATE TABLE t_double_autoinc (a INT KEY AUTO_INCREMENT) ENGINE = MYISAM;
+
+--eval CREATE TRIGGER trig_autoinc BEFORE INSERT ON t_autoinc FOR EACH ROW BEGIN INSERT INTO t_stmt VALUES ('x'); END
+--eval CREATE TRIGGER trig_double_autoinc BEFORE INSERT ON t_double_autoinc FOR EACH ROW BEGIN INSERT INTO t_autoinc VALUES (NULL); END
 
 CREATE DATABASE other;
 
@@ -127,9 +132,15 @@ SET @@global.binlog_format = MIXED;
 SET @@session.binlog_format = MIXED;
 
 --echo * Unsafe statement and stmt-only engine
-# This will give a warning.
+--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
 INSERT INTO t_stmt VALUES (UUID());
 
+# Concatenate three unsafe values, and then concatenate NULL to
+# that so that the result is NULL and we instead use autoinc.
+--echo * Multi-unsafe statement and stmt-only engine
+--error ER_BINLOG_UNSAFE_AND_STMT_ENGINE
+INSERT DELAYED INTO t_double_autoinc SELECT CONCAT(UUID(), @@hostname, myfunc_int(), NULL) FROM mysql.general_log LIMIT 1;
+
 
 --echo ---- binlog_format=statement ----
 
@@ -213,7 +224,7 @@ INSERT INTO t VALUES (UUID());
 
 --echo ==== Clean up ====
 
-DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt;
+DROP TABLE t, t_self_logging, t_row, t_stmt, t_slave_stmt, t_autoinc, t_double_autoinc;
 DROP DATABASE other;
 SET @@global.binlog_format = @old_binlog_format;
 SET @@session.binlog_format = @old_binlog_format;

sql/share/errmsg.txt

@@ -6076,7 +6076,7 @@ ER_SLAVE_INCIDENT
 ER_NO_PARTITION_FOR_GIVEN_VALUE_SILENT
         eng "Table has no partition for some existing values"
 ER_BINLOG_UNSAFE_STATEMENT
-        eng "Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT."
+        eng "Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: %s"
 ER_SLAVE_FATAL_ERROR
         eng "Fatal error: %s"
 ER_SLAVE_RELAY_LOG_READ_FAILURE
@@ -6211,7 +6211,7 @@ ER_BINLOG_ROW_ENGINE_AND_STMT_ENGINE
 ER_BINLOG_ROW_MODE_AND_STMT_ENGINE
   eng "Cannot execute statement: binlogging impossible since BINLOG_FORMAT = ROW and at least one table uses a storage engine limited to statement-logging."
 ER_BINLOG_UNSAFE_AND_STMT_ENGINE
-  eng "Unsafe statement binlogged as statement since storage engine is limited to statement-logging."
+  eng "Cannot execute statement: binlogging of unsafe statement is impossible when storage engine is limited to statement-logging and BINLOG_FORMAT = MIXED.  Reason for unsafeness: %s"
 ER_BINLOG_ROW_INJECTION_AND_STMT_ENGINE
   eng "Cannot execute row injection: binlogging impossible since at least one table uses a storage engine limited to statement-logging."
 ER_BINLOG_STMT_MODE_AND_ROW_ENGINE
@@ -6236,7 +6236,5 @@ ER_BINLOG_UNSAFE_SYSTEM_VARIABLE
 ER_BINLOG_UNSAFE_SYSTEM_FUNCTION
   eng "Statement uses a system function whose value may differ on slave."
 
-ER_BINLOG_UNSAFE_WARNING_SHORT
-  eng "%s Reason: %s"
-ER_BINLOG_UNSAFE_WARNING_LONG
-  eng "%s Reason: %s Statement: %s"
+ER_MESSAGE_AND_STATEMENT
+  eng "%s Statement: %s"

sql/sql_class.cc

@@ -3282,8 +3282,8 @@ void xid_cache_delete(XID_STATE *xid_state)
 
      binlog_format      * SMRSMRSMR SMRSMRSMR SMRSMRSMR
 
-     Logged format      - SS-SS---- -RR-RR-RR SRRSRR-RR
-     Warning/Error      1 --2332444 5--5--6-- ---7--6--
+     Logged format      - SS-S----- -RR-RR-RR SRRSRR-RR
+     Warning/Error      1 --2732444 5--5--6-- ---7--6--
 
   Legend
   ------
@@ -3303,8 +3303,9 @@ void xid_cache_delete(XID_STATE *xid_state)
      BINLOG_FORMAT = ROW and at least one table uses a storage engine
      limited to statement-logging.
 
-  3. Warning: Unsafe statement binlogged as statement since storage
-     engine is limited to statement-logging.
+  3. Error: Cannot execute statement: binlogging of unsafe statement
+     is impossible when storage engine is limited to statement-logging
+     and BINLOG_FORMAT = MIXED.
 
   4. Error: Cannot execute row injection: binlogging impossible since
      at least one table uses a storage engine limited to
@@ -3457,17 +3458,16 @@ int THD::decide_logging_format(TABLE_LIST *tables)
       else if ((unsafe_flags= lex->get_stmt_unsafe_flags()) != 0)
       {
         /*
-          3. Warning: Unsafe statement binlogged as statement since
-             storage engine is limited to statement-logging.
+          3. Error: Cannot execute statement: binlogging of unsafe
+             statement is impossible when storage engine is limited to
+             statement-logging and BINLOG_FORMAT = MIXED.
         */
-        binlog_unsafe_warning_flags|=
-          (1 << BINLOG_STMT_WARNING_UNSAFE_AND_STMT_ENGINE) |
-          (unsafe_flags << BINLOG_STMT_WARNING_COUNT);
-        DBUG_PRINT("info", ("Scheduling warning to be issued by "
-                            "binlog_query: %s",
-                            ER(ER_BINLOG_UNSAFE_AND_STMT_ENGINE)));
-        DBUG_PRINT("info", ("binlog_unsafe_warning_flags: 0x%x",
-                            binlog_unsafe_warning_flags));
+        for (int unsafe_type= 0;
+             unsafe_type < LEX::BINLOG_STMT_UNSAFE_COUNT;
+             unsafe_type++)
+          if (unsafe_flags & (1 << unsafe_type))
+            my_error((error= ER_BINLOG_UNSAFE_AND_STMT_ENGINE), MYF(0),
+                     ER(LEX::binlog_stmt_unsafe_errcode[unsafe_type]));
       }
       /* log in statement format! */
     }
@@ -3499,13 +3499,11 @@ int THD::decide_logging_format(TABLE_LIST *tables)
             7. Warning: Unsafe statement logged as statement due to
                binlog_format = STATEMENT
           */
-          binlog_unsafe_warning_flags|=
-            (1 << BINLOG_STMT_WARNING_UNSAFE_AND_STMT_MODE) |
-            (unsafe_flags << BINLOG_STMT_WARNING_COUNT);
+          binlog_unsafe_warning_flags|= unsafe_flags;
           DBUG_PRINT("info", ("Scheduling warning to be issued by "
                               "binlog_query: '%s'",
                               ER(ER_BINLOG_UNSAFE_STATEMENT)));
-          DBUG_PRINT("info", ("binlog_stmt_flags: 0x%x",
+          DBUG_PRINT("info", ("binlog_unsafe_warning_flags: 0x%x",
                               binlog_unsafe_warning_flags));
         }
         /* log in statement format! */
@@ -3536,7 +3534,7 @@ int THD::decide_logging_format(TABLE_LIST *tables)
     DBUG_PRINT("info", ("decision: no logging since "
                         "mysql_bin_log.is_open() = %d "
                         "and (options & OPTION_BIN_LOG) = 0x%llx "
-                        "and binlog_format = %d "
+                        "and binlog_format = %ld "
                         "and binlog_filter->db_ok(db) = %d",
                         mysql_bin_log.is_open(),
                         (options & OPTION_BIN_LOG),
@@ -4037,31 +4035,11 @@ void THD::issue_unsafe_warnings()
     Ensure that binlog_unsafe_warning_flags is big enough to hold all
     bits.  This is actually a constant expression.
   */
-  DBUG_ASSERT(BINLOG_STMT_WARNING_COUNT + 2 * LEX::BINLOG_STMT_UNSAFE_COUNT <=
+  DBUG_ASSERT(2 * LEX::BINLOG_STMT_UNSAFE_COUNT <=
               sizeof(binlog_unsafe_warning_flags) * CHAR_BIT);
 
-  /**
-    @note The order of the elements of this array must correspond to
-    the order of elements in enum_binlog_stmt_unsafe.
-  */
-  static const int explanations[LEX::BINLOG_STMT_UNSAFE_COUNT] =
-  {
-    ER_BINLOG_UNSAFE_LIMIT,
-    ER_BINLOG_UNSAFE_INSERT_DELAYED,
-    ER_BINLOG_UNSAFE_SYSTEM_TABLE,
-    ER_BINLOG_UNSAFE_TWO_AUTOINC_COLUMNS,
-    ER_BINLOG_UNSAFE_UDF,
-    ER_BINLOG_UNSAFE_SYSTEM_VARIABLE,
-    ER_BINLOG_UNSAFE_SYSTEM_FUNCTION
-  };
-  uint32 flags= binlog_unsafe_warning_flags;
-  /* No warnings (yet) for this statement. */
-  if (flags == 0)
-    DBUG_VOID_RETURN;
+  uint32 unsafe_type_flags= binlog_unsafe_warning_flags;
 
-  /* Get the types of unsafeness that affect the current statement. */
-  uint32 unsafe_type_flags= flags >> BINLOG_STMT_WARNING_COUNT;
-  DBUG_ASSERT((unsafe_type_flags & LEX::BINLOG_STMT_UNSAFE_ALL_FLAGS) != 0);
   /*
     Clear: (1) bits above BINLOG_STMT_UNSAFE_COUNT; (2) bits for
     warnings that have been printed already.
@@ -4072,18 +4050,7 @@ void THD::issue_unsafe_warnings()
   if (unsafe_type_flags == 0)
     DBUG_VOID_RETURN;
 
-  /* Figure out which error code to issue. */
-  int err;
-  if (binlog_unsafe_warning_flags &
-      (1 << BINLOG_STMT_WARNING_UNSAFE_AND_STMT_ENGINE))
-    err= ER_BINLOG_UNSAFE_AND_STMT_ENGINE;
-  else {
-    DBUG_ASSERT(binlog_unsafe_warning_flags &
-                (1 << BINLOG_STMT_WARNING_UNSAFE_AND_STMT_MODE));
-    err= ER_BINLOG_UNSAFE_STATEMENT;
-  }
-
-  DBUG_PRINT("info", ("flags: 0x%x  err: %d", unsafe_type_flags, err));
+  DBUG_PRINT("info", ("unsafe_type_flags: 0x%x", unsafe_type_flags));
 
   /*
     For each unsafe_type, check if the statement is unsafe in this way
@@ -4095,20 +4062,25 @@ void THD::issue_unsafe_warnings()
   {
     if ((unsafe_type_flags & (1 << unsafe_type)) != 0)
     {
-      push_warning_printf(this, MYSQL_ERROR::WARN_LEVEL_NOTE, err,
-                          ER(ER_BINLOG_UNSAFE_WARNING_SHORT),
-                          ER(err), ER(explanations[unsafe_type]));
+      push_warning_printf(this, MYSQL_ERROR::WARN_LEVEL_NOTE,
+                          ER_BINLOG_UNSAFE_STATEMENT,
+                          ER(ER_BINLOG_UNSAFE_STATEMENT),
+                          ER(LEX::binlog_stmt_unsafe_errcode[unsafe_type]));
       if (global_system_variables.log_warnings)
-        sql_print_warning(ER(ER_BINLOG_UNSAFE_WARNING_LONG),
-                          ER(err), ER(explanations[unsafe_type]), query);
+      {
+        char buf[MYSQL_ERRMSG_SIZE * 2];
+        sprintf(buf, ER(ER_BINLOG_UNSAFE_STATEMENT),
+                ER(LEX::binlog_stmt_unsafe_errcode[unsafe_type]));
+        sql_print_warning(ER(ER_MESSAGE_AND_STATEMENT), buf, query);
+      }
     }
   }
   /*
     Mark these unsafe types as already printed, to avoid printing
     warnings for them again.
   */
-  binlog_unsafe_warning_flags|= unsafe_type_flags <<
-    (BINLOG_STMT_WARNING_COUNT + LEX::BINLOG_STMT_UNSAFE_COUNT);
+  binlog_unsafe_warning_flags|=
+    unsafe_type_flags << LEX::BINLOG_STMT_UNSAFE_COUNT;
   DBUG_VOID_RETURN;
 }
 

sql/sql_class.h

@@ -1449,42 +1449,21 @@ class THD :public Statement,
   */
   enum_binlog_format current_stmt_binlog_format;
 
-  /**
-    Enumeration listing binlog-related warnings that a statement can
-    cause.
-  */
-  enum enum_binlog_stmt_warning {
-
-    /* ER_BINLOG_UNSAFE_AND_STMT_ENGINE affects current stmt */
-    BINLOG_STMT_WARNING_UNSAFE_AND_STMT_ENGINE= 0,
-
-    /* ER_BINLOG_UNSAFE_STATEMENT affects current stmt */
-    BINLOG_STMT_WARNING_UNSAFE_AND_STMT_MODE,
-
-    /** The last element of this enumeration type. */
-    BINLOG_STMT_WARNING_COUNT
-  };
-
   /**
     Bit field for the state of binlog warnings.
 
-    There are three groups of bits:
+    There are two groups of bits:
 
-    - The low BINLOG_STMT_WARNING_COUNT bits indicate the type of
-      warning that the current (top-level) statement will issue.  At
-      most one of these bits should be set (this is ensured by the
-      logic in decide_logging_format).
-
-    - The following Lex::BINLOG_STMT_UNSAFE_COUNT bits list all types
-      of unsafeness that the current statement has.
+    - The first Lex::BINLOG_STMT_UNSAFE_COUNT bits list all types of
+      unsafeness that the current statement has.
 
     - The following Lex::BINLOG_STMT_UNSAFE_COUNT bits list all types
       of unsafeness that the current statement has issued warnings
       for.
 
     Hence, this variable must be big enough to hold
-    BINLOG_STMT_WARNING_COUNT + 2 * Lex::BINLOG_STMT_UNSAFE_COUNT
-    bits.  This is asserted in @c issue_unsafe_warnings().
+    2*Lex::BINLOG_STMT_UNSAFE_COUNT bits.  This is asserted in @c
+    issue_unsafe_warnings().
 
     The first and second groups of bits are set by @c
     decide_logging_format() when it detects that a warning should be

sql/sql_lex.cc

@@ -31,6 +31,23 @@
 
 sys_var *trg_new_row_fake_var= (sys_var*) 0x01;
 
+/**
+  @note The order of the elements of this array must correspond to
+  the order of elements in enum_binlog_stmt_unsafe.
+*/
+const int
+Query_tables_list::binlog_stmt_unsafe_errcode[BINLOG_STMT_UNSAFE_COUNT] =
+{
+  ER_BINLOG_UNSAFE_LIMIT,
+  ER_BINLOG_UNSAFE_INSERT_DELAYED,
+  ER_BINLOG_UNSAFE_SYSTEM_TABLE,
+  ER_BINLOG_UNSAFE_TWO_AUTOINC_COLUMNS,
+  ER_BINLOG_UNSAFE_UDF,
+  ER_BINLOG_UNSAFE_SYSTEM_VARIABLE,
+  ER_BINLOG_UNSAFE_SYSTEM_FUNCTION
+};
+
+
 /* Longest standard keyword name */
 #define TOCK_NAME_LENGTH 24
 

sql/sql_lex.h

@@ -1099,6 +1099,11 @@ class Query_tables_list
   static const int BINLOG_STMT_UNSAFE_ALL_FLAGS=
     ((1 << BINLOG_STMT_UNSAFE_COUNT) - 1);
 
+  /**
+    Maps elements of enum_binlog_stmt_unsafe to error codes.
+  */
+  static const int binlog_stmt_unsafe_errcode[BINLOG_STMT_UNSAFE_COUNT];
+
   /**
     Determine if this statement is marked as unsafe.