With MDEV-15132 in MariaDB 10.3.5, InnoDB no longer writes the
transaction identifier to the TRX_SYS page. The information is
only written to undo log headers and sometimes rollback segment
headers. Because the setting innodb_force_recovery=5 will skip
reading any of those pages, the maximum transaction identifier
will no longer be determined.

innobase_map_isolation_level(): Always report READ UNCOMMITTED
if innodb_force_recovery has been set to 5 or more, or
innodb_read_only is set. This will avoid errors reported by
lock_check_trx_id_sanity() and ReadView::check_trx_id_sanity().

lock_clust_rec_cons_read_sees(): Do not check for
innodb_read_only, now that innobase_map_isolation_level() will
guarantee that no read view will be created or used.

row_search_mvcc(): Do not check for innodb_force_recovery<5,
now that innobase_map_isolation_level() will guarantee that
no read view will be created or used.

The problem is a regression caused by MDEV-15158.
If some transactions were committed with wsrep_on=0, a
rollback segment header having the highest trx_id assigned might
store undefined wsrep XID. When reading the wsrep checkpoint
from InnodB, the undefined wsrep XID might be returned instead
of the highest valid one.

Similarly, if the binary log is intermittently disabled or enabled
while InnoDB transactions are being committed, the latest updated
rollback segment header page might not contain the latest binlog metadata.

Therefore, the MDEV-15158 logic to rely on TRX_RSEG_MAX_TRX_ID for
determining the most recent WSREP XID or binlog position is invalid.
We must choose the maximum entries among the rollback segment header
pages.

This fix is based on code submitted by Teemu Ollakka from Codership
and by Thirunarayanan Balathandayuthapani from MariaDB Corporation.

trx_purge_add_undo_to_history(): Only write TRX_RSEG_MAX_TRX_ID
when it was used to be written before MDEV-15158.

wsrep_seqno: Renamed from trx_sys_cur_xid_seqno.

wsrep_uuid: Renamed from trx_sys_cur_xid_uuid, and enable in non-debug
builds.

read_wsrep_xid_uuid(): Make non-debug, and remove the memcpy().

trx_rseg_update_wsrep_checkpoint(): Correctly compare and copy
the entire UUID in the debug check. In case of UUID mismatch,
write the WSREP XID to all 128 rollback segment headers in
a single mini-transaction.

trx_rseg_read_wsrep_checkpoint(rseg_header, xid): Make static.
In case the information is absent, do not overwrite xid.

trx_rseg_read_wsrep_checkpoint(xid): Determine the maximum
WSREP XID.

trx_rseg_mem_restore(): Remove the parameter max_rseg_trx_id.
Determine the latest binlog file and position by comparing
file names and offsets. Declare trx_sys.recovered_binlog_offset
as an unsigned type.

Expect index except unique constrain in case of heap table conversion.

Backporting from bb-10.2-compatibility to bb-10.2-ext

Version: 2018-01-26

- CREATE PACKAGE [BODY] statements are now
  entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:

    CREATE DEFINER user@host PACKAGE pkg ... END;
    CREATE DEFINER user@host PACKAGE BODY pkg ... END;

- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:

    CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;

- Package routines are now created from the package CREATE PACKAGE BODY
  statement and don't produce individual records in mysql.proc.

- CREATE PACKAGE BODY now supports package-wide variables.
  Package variables can be read and set inside package routines.
  Package variables are stored in a separate sp_rcontext,
  which is cached in THD on the first packate routine call.

- CREATE PACKAGE BODY now supports the initialization section.

- All public routines (i.e. declared in CREATE PACKAGE)
  must have implementations in CREATE PACKAGE BODY

- Only public package routines are available outside of the package

- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
  privileges

- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported

- SHOW CREATE PACKAGE [BODY] is now supported

- SHOW PACKAGE [BODY] STATUS is now supported

- CREATE and DROP for PACKAGE [BODY] now works for non-current databases

- mysqldump now supports packages

- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines

- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)

- A new package body level MDL was added

- Recursive calls for package procedures are now possible

- Routine forward declarations in CREATE PACKATE BODY are now supported.

- Package body variables now work as SP OUT parameters

- Package body variables now work as SELECT INTO targets

- Package body variables now support ROW, %ROWTYPE, %TYPE

- CREATE PACKAGE [BODY] statements are now
  entirely written to mysql.proc with type='PACKAGE' and type='PACKAGE BODY'.
- CREATE PACKAGE BODY now supports IF NOT EXISTS
- DROP PACKAGE BODY now supports IF EXISTS
- CREATE OR REPLACE PACKAGE [BODY] is now supported
- CREATE PACKAGE [BODY] now support the DEFINER clause:

    CREATE DEFINER user@host PACKAGE pkg ... END;
    CREATE DEFINER user@host PACKAGE BODY pkg ... END;

- CREATE PACKAGE [BODY] now supports SQL SECURITY and COMMENT clauses, e.g.:

    CREATE PACKAGE p1 SQL SECURITY INVOKER COMMENT "comment" AS ... END;

- Package routines are now created from the package CREATE PACKAGE BODY
  statement and don't produce individual records in mysql.proc.

- CREATE PACKAGE BODY now supports package-wide variables.
  Package variables can be read and set inside package routines.
  Package variables are stored in a separate sp_rcontext,
  which is cached in THD on the first packate routine call.

- CREATE PACKAGE BODY now supports the initialization section.

- All public routines (i.e. declared in CREATE PACKAGE)
  must have implementations in CREATE PACKAGE BODY

- Only public package routines are available outside of the package

- {CREATE|DROP} PACKAGE [BODY] now respects CREATE ROUTINE and ALTER ROUTINE
  privileges

- "GRANT EXECUTE ON PACKAGE BODY pkg" is now supported

- SHOW CREATE PACKAGE [BODY] is now supported

- SHOW PACKAGE [BODY] STATUS is now supported

- CREATE and DROP for PACKAGE [BODY] now works for non-current databases

- mysqldump now supports packages

- "SHOW {PROCEDURE|FUNCTION) CODE pkg.routine" now works for package routines

- "SHOW PACKAGE BODY CODE pkg" now works (the package initialization section)

- A new package body level MDL was added

- Recursive calls for package procedures are now possible

- Routine forward declarations in CREATE PACKATE BODY are now supported.

- Package body variables now work as SP OUT parameters

- Package body variables now work as SELECT INTO targets

- Package body variables now support ROW, %ROWTYPE, %TYPE

MDEV-15405 Mixed replication fails with "Could not execute Delete_rows_v1 event" upon DELETE HISTORY

Allow slave thread to set time for system versioning

Note that every binlog event stores now(0), while microseconds
are only stored when they're actually used in the query.

Meaning for unversioned->versioned replication, there will be
no microseconds. Need to compensate for that.

Because NOW() is set to system time, unless overriden.
And both should follow big manual system time changes,
while still coping with lowres system clocks.

Ignoring system time changes is both confusing and
breaks with restarts.

as these fields are always declared NOT NULL anyway

MDEV-15395 Wrong result or Assertion `old_part_id == m_last_part' failed in ha_partition::update_row on slave

Revert commit fd240a10 and add a test case

set m_last_part to something meaningful when opening partitions

just as SHOW CREATE TABLE omits them from the index definition

copy the corresponding line from mysql_prepare_insert()

MDEV-15395 Wrong result or Assertion `old_part_id == m_last_part' failed in ha_partition::update_row on slave

RBR cannot work with system versioning on the master.

row_end column is either system time (not @@timestamp) with microsecond
precision or transaction id. Either way, it'll certainly be different
on the slave. So if the master row contains row_end column, it won't
match on the slave. And if we ignore row_end when comparing,
then some other row might match instead.

and few indentation changes

Remove 1668efb7 that introduced a special magic
behavior for UNIX_TIMESTAMP() in the AS OF context

and delete few garbage-in-garbage-out tests

Vers SQL: force VERS_ALTER_HISTORY_KEEP behavior in the slave thread

MDEV-15191 Assertion `bit < (map)->n_bits' failed in bitmap_is_set
upon INSERT

MDEV-15036 Assertion `!is_set() || (m_status == DA_OK_BULK
&& is_bulk_op())' in Diagnostics_area::set_ok_status or unexpected
ER_RANGE_NOT_INCREASING_ERROR

Vers_parse_info::fix_alter_info(): disallow DROP SYSTEM VERSIONING
for system_time partitioned tables.

add a test case

vers_insert_history_row(): do not insert rows with zero or negative lifetime.

mysql_update(): properly handle error from vers_insert_history_row()

Vers SQL: TRT fix getting TRX_ID by COMMIT_TS

Fixed wrong assumption that records are ordered by COMMIT_TS.
This is anyway a quick hack until tempesta-tech#314 is done.

See also FIXME and TODO in TR_table::query(MYSQL_TIME, bool).

Test: SEES case for trx_id.test [closes #456]