Disabled show_explain when used with valgrind because of random failures
Disable ssl-big when running with --valgrind as it takes more than 1 hour

- mariadbd and mariadbd-env added
- Changed output of print_global_resfile to use mariadbd instead of mysqld

Many of the changes was needed to be able to collect and print engine
name and table version id's in the ddl log.

This is done by prefixing -backup.log to the --log-ddl-recovery file.
The reason for this is to have a copy of the original ddl log file
if ddl recovery does not succeed.

MDEV-25604 Atomic DDL: Binlog event written upon recovery does not
           have default database

The purpose of this task is to ensure that ALTER TABLE is atomic even if
the MariaDB server would be killed at any point of the alter table.
This means that either the ALTER TABLE succeeds (including that triggers,
the status tables and the binary log are updated) or things should be
reverted to their original state.

If the server crashes before the new version is fully up to date and
commited, it will revert to the original table and remove all
temporary files and tables.
If the new version is commited, crash recovery will use the new version,
and update triggers, the status tables and the binary log.
The one execption is ALTER TABLE .. RENAME .. where no changes are done
to table definition. This one will work as RENAME and roll back unless
the whole statement completed, including updating the binary log (if
enabled).

Other changes:
- Added handlerton->check_version() function to allow the ddl recovery
  code to check, in case of inplace alter table, if the table in the
  storage engine is of the new or old version.
- Added handler->table_version() so that an engine can report the current
  version of the table. This should be changed each time the table
  definition changes.
- Added  ha_signal_ddl_recovery_done() and
  handlerton::signal_ddl_recovery_done() to inform all handlers when
  ddl recovery has been done. (Needed by InnoDB).
- Added handlerton call inplace_alter_table_committed, to signal engine
  that ddl_log has been closed for the alter table query.
- Added new handerton flag
  HTON_REQUIRES_NOTIFY_TABLEDEF_CHANGED_AFTER_COMMIT to signal when we
  should call hton->notify_tabledef_changed() during
  mysql_inplace_alter_table. This was required as MyRocks and InnoDB
  needed the call at different times.
- Added function server_uuid_value() to be able to generate a temporary
  xid when ddl recovery writes the query to the binary log. This is
  needed to be able to handle crashes during ddl log recovery.
- Moved freeing of the frm definition to end of mysql_alter_table() to
  remove duplicate code and have a common exit strategy.

-------
InnoDB part of atomic ALTER TABLE
(Implemented by Marko Mäkelä)
innodb_check_version(): Compare the saved dict_table_t::def_trx_id
to determine whether an ALTER TABLE operation was committed.

We must correctly recover dict_table_t::def_trx_id for this to work.
Before purge removes any trace of DB_TRX_ID from system tables, it
will make an effort to load the user table into the cache, so that
the dict_table_t::def_trx_id can be recovered.

ha_innobase::table_version(): return garbage, or the trx_id that would
be used for committing an ALTER TABLE operation.

In InnoDB, table names starting with #sql-ib will remain special:
they will be dropped on startup. This may be revisited later in
MDEV-18518 when we implement proper undo logging and rollback
for creating or dropping multiple tables in a transaction.

Table names starting with #sql will retain some special meaning:
dict_table_t::parse_name() will not consider such names for
MDL acquisition, and dict_table_rename_in_cache() will treat such
names specially when handling FOREIGN KEY constraints.

Simplify InnoDB DROP INDEX.
Prevent purge wakeup

To ensure that dict_table_t::def_trx_id will be recovered correctly
in case the server is killed before ddl_log_complete(), we will block
the purge of any history in SYS_TABLES, SYS_INDEXES, SYS_COLUMNS
between ha_innobase::commit_inplace_alter_table(commit=true)
(purge_sys.stop_SYS()) and purge_sys.resume_SYS().
The completion callback purge_sys.resume_SYS() must be between
ddl_log_complete() and MDL release.

--------

MyRocks support for atomic ALTER TABLE
(Implemented by Sergui Petrunia)

Implement these SE API functions:
- ha_rocksdb::table_version()
- hton->check_version = rocksdb_check_versionMyRocks data dictionary
  now stores table version for each table.
  (Absence of table version record is interpreted as table_version=0,
  that is, which means no upgrade changes are needed)
- For inplace alter table of a partitioned table, call the underlying
  handlerton when checking if the table is ok. This assumes that the
  partition engine commits all changes at once.

ALTER TABLE .. RENAME, when used with the inplace algorithm, does:
- Do an inplace or online alter to the new definition
- Rename to new name
- Update triggers.

If update triggers would fail, we would rename the table back.
The problem with this approach is that the table would have the new
definition but the rename would fail.  The binary log would also not be
updated.

The solution to this is to very early check if we can rename triggers
and give an error if this would fail.
Both ALTER TABLE ... RENAME and RENAME TABLE is fixed.

This was implemented by moving the pre-check of rename table in triggers
from Table_triggers_list::change_table_name() to
Table_triggers_list::prepare_for_rename().

Before this fix, one would get a 'Trigger ... already exists' when trying
to create a trigger matching the original name and 'Trigger ... does not
exists" when trying to drop it.

Fixes a reported bug in MDEV-25180 Atomic ALTER TABLE

MDEV-25517 Atomic DDL: Assertion `query_arg' in THD::binlog_query
upon DROP TRIGGER

The bug was that the stmt_query variable was not populated
with the query in case of DROP TRIGGER of an orphan trigger
(.TRN file exists & table exists, but the trigger was not in
table->triggers).

The purpose of this task is to ensure that CREATE TRIGGER is atomic

When a trigger is created, we first create a trigger_name.TRN file and then
create or update the table_name.TRG files.
This is done by creating .TRN~ and .TRG~ files and replacing (or creating)
the result files.

The new logic is

- Log CREATE TRIGGER to DDL log, with a marker if old trigger existsted
- If old .TRN or .TRG files exists, make backup copies of these
- Create the new .TRN and .TRG files as before
- Remove the backups

Crash recovery
- If query has been logged to binary log:
  - delete any left over backup files
- else
   - Delete any old .TRN~ or .TRG~ files
   - If there was orignally some triggers (old .TRG file existed)
      - If we crashed before creating all backup files
         - Delete existing backup files
      - else
         - Restore backup files
      - end
   - Delete .TRN and .TRG file (as there was no triggers before

One benefit of the new code is that CREATE OR REPLACE TRIGGER is now
totally atomic even if there existed an old trigger: Either the old
trigger will be replaced or the old one will be left untouched.

Other things:
- If sql_create_definition_file() would fail, there could be memory leaks
  in CREATE TRIGGER, DROP TRIGGER or CREATE OR REPLACE TRIGGER.  This
  is now fixed.

The logic of the new code is:
- Log CREATE view to DDL log, with a marker if old view existed
- If old view exists (in case of CREATE or REPLACE view), make a copy
  of the old view as view_name.frm-
- Create the new view definition file
- Delete copy of view if it was created.

Crash recovery:
- Delete view_name.frm~ file (Temporary file for view definition)
- If query was logged to binary log
  - Delete copy of view if it exists
- else
   -rename the copy of the view over the .frm file (restoring the
    old definition)

One benefit of the new code is that CREATE OR REPLACE VIEW for an
existing view is no fully atomic: Either the view will be replaced or
the old one will be left unchanged.

There are a few different cases to consider

Logging of CREATE TABLE and CREATE TABLE ... LIKE
- If REPLACE is used and there was an existing table, DDL log the drop of
  the table.
- If discovery of table is to be done
    - DDL LOG create table
  else
    - DDL log create table (with engine type)
    - create the table
- If table was created
  - Log entry to binary log with xid
  - Mark DDL log completed

Crash recovery:
- If query was in binary log do nothing and exit
- If discoverted table
   - Delete the .frm file
-else
   - Drop created table and frm file
- If table was dropped, write a DROP TABLE statement in binary log

CREATE TABLE ... SELECT required a little more work as when one is using
statement logging the query is written to the binary log before commit is
done.
This was fixed by adding a DROP TABLE to the binary log during crash
recovery if the ddl log entry was not closed. In this case the binary log
will contain:
CREATE TABLE xxx ... SELECT ....
DROP TABLE xxx;

Other things:
- Added debug_crash_here() functionality to Aria to be able to test
  crash in create table between the creation of the .MAI and the .MAD files.

Description of how DROP DATABASE works after this patch

- Collect list of tables
- DDL log tables as they are dropped
- DDL log drop database
- Delete db.opt
- Delete data directory
- Log either DROP TABLE or DROP DATABASE to binary log
- De active ddl log entry

This is in line of how things where before (minus ddl logging) except that
we delete db.opt file last to not loose it if DROP DATABASE fails.

On recovery we have to ensure that all dropped tables are logged in
binary log and that they are properly dropped (as with atomic drop
table).
No new tables be dropped as part of recovery.

Recovery of active drop database ddl log entry:

- If drop database was logged to ddl log but was not found in the binary
  log:
  - drop the db.opt file and database directory.
  - Log DROP DATABASE to binary log
- If drop database was not logged to ddl log
  - Update binary log with DROP TABLE of the dropped tables. If table list
    is longer than max_allowed_packet, then the query will be split into
    multiple DROP TABLE/VIEW queries.

Other things:
- Added DDL_LOG_STATE and 'current database' as arguments to
  mysql_rm_table_no_locks(). This was needed to be able to combine
  ddl logging of DROP DATABASE and DROP TABLE and make the generated
  DROP TABLE statements shorter.
- To make the DROP TABLE statement created by ddl log shorter, I changed
  the binlogged query to use current directory and omit the directory
  part for all tables in the current directory.
- Merged some DROP TABLE and DROP VIEW code in ddl logger.  This was done
  to be able get separate DROP VIEW and DROP TABLE statements in the binary
  log.
- Added a 'recovery_state' variable to remember the state of dropped
  tables and views.
- Moved out code that drops database objects (stored procedures) from
  mysql_rm_db_internal() to drop_database_objects() for better code reuse.
- Made mysql_rm_db_internal() global so that could be used by the ddl
  recovery code.

The purpose of this task is to ensure that DROP TRIGGER is atomic.

Description of how atomic drop trigger works:

Logging of DROP TRIGGER
    Log the following information:
    db
    table name
    trigger name
    xid /* Used to check if query was already logged to binary log */
    initial length of the .TRG file
    query if there is space for it, if not log a zero length query.

Recovery operations:
- Delete if exists 'database/trigger_name.TRN~'
  - If this file existed, it means that we crashed before the trigger
    was deleted and there is nothing else to do.
- Get length of .TRG file
  - If file length is unchanged, trigger was not dropped. Nothing else to
    do.
- Log original query to binary, if it was stored in the ddl log. If it was
  not stored (long query string), log the following query to binary log:
  use `database` ; DROP TRIGGER IF EXISTS `trigger_name`
  /* generated by ddl log */;

Other things:
- Added trigger name and DDL_LOG_STATE to drop_trigger()
  Trigger name was added to make the interface more consistent and
  more general.

Logging logic:
- Log tables, just before they are dropped, to the ddl log
- After the last table for the statement is dropped, log an xid for the
  whole ddl log event

In case of crash:
- Remove first any active DROP TABLE events from the ddl log that matches
  xids found in binary log (this mean the drop was successful and was
  propery logged).
- Loop over all active DROP TABLE events
  - Ensure that the table is completely dropped
- Write a DROP TABLE entry to the binary log with the dropped tables.

Other things:
- Added code to ha_drop_table() to be able to tell the difference if
  a get_new_handler() failed because of out-of-memory or because the
  handler refused/was not able to create a a handler. This was needed
  to get sequences to work as sequences needs a share object to be passed
  to get_new_handler()
- TC_LOG_BINLOG::recover() was changed to always collect Xid's from the
  binary log and always call ddl_log_close_binlogged_events(). This was
  needed to be able to collect DROP TABLE events with embedded Xid's
  (used by ddl log).
- Added a new variable "$grep_script" to binlog filter to be able to find
  only rows that matches a regexp.
- Had to adjust some test that changed because drop statements are a bit
  larger in the binary log than before (as we have to store the xid)

Other things:
- MDEV-25588 Atomic DDL: Binlog query event written upon recovery is corrupt
  fixed (in the original commit).

- Major rewrite of ddl_log.cc and ddl_log.h
  - ddl_log.cc described in the beginning how the recovery works.
  - ddl_log.log has unique signature and is dynamic. It's easy to
    add more information to the header and other ddl blocks while still
    being able to execute old ddl entries.
  - IO_SIZE for ddl blocks is now dynamic. Can be changed without affecting
    recovery of old logs.
  - Code is more modular and is now usable outside of partition handling.
  - Renamed log file to dll_recovery.log and added option --log-ddl-recovery
    to allow one to specify the path & filename.
- Added ddl_log_entry_phase[], number of phases for each DDL action,
  which allowed me to greatly simply set_global_from_ddl_log_entry()
- Changed how strings are stored in log entries, which allows us to
  store much more information in a log entry.
- ddl log is now always created at start and deleted on normal shutdown.
  This simplices things notable.
- Added probes debug_crash_here() and debug_simulate_error() to simply
  crash testing and allow crash after a given number of times a probe
  is executed. See comments in debug_sync.cc and rename_table.test for
  how this can be used.
- Reverting failed table and view renames is done trough the ddl log.
  This ensures that the ddl log is tested also outside of recovery.
- Added helper function 'handler::needs_lower_case_filenames()'
- Extend binary log with Q_XID events. ddl log handling is using this
  to check if a ddl log entry was logged to the binary log (if yes,
  it will be deleted from the log during ddl_log_close_binlogged_events()
- If a DDL entry fails 3 time, disable it. This is to ensure that if
  we have a crash in ddl recovery code the server will not get stuck
  in a forever crash-restart-crash loop.

mysqltest.cc changes:
- --die will now replace $variables with their values
- $error will contain the error of the last failed statement

storage engine changes:
- maria_rename() was changed to be more robust against crashes during
  rename.

This is required to make Atomic RENAME TABLE work for these engines

The requirement is that if we have a server crash in the middle of a
storage engine rename call, the upcoming ddl log recovery should be able
to finalize it by re-execute the rename.

This happened because in ma_open() we did not take into account that
tran_man (Aria transaction manager) would not be initialized.
Fixed by using the same check for minimum transaction id as we use
during repair.

Other things:
- ariad_read_log now displays a readable timestamp
- Removed printing of datapage for header. This removes
  some wrong warnings from the aria_read_log output

This did not server any real purpose and also made it too difficult to add
asserts for string memory overrwrites.

Moved all functionallity from Static_binary_string to Binary_string.

Other things:
- Added asserts to q_xxx and qs_xxx functions to check for memory overruns
- Fixed wrong test in String_buffer::set_buffer_if_not_allocated().
  The idea is to reuse allocated buffers (to avoid extra allocs), which
  the code did not do.

This change is to get rid of randomly failing tests, especially those
that reads random position of the binary log. From looking at the logs
it's clear that some failures is because of a read char (with value >= 128)
is converted to a big long value. Using uchar everywhere makes this much
less likely to happen.
Another benefit is that a lot of cast of char to uchar could be removed.

Other things:
- Removed some extra space before '=' and '+=' in assignments
- Fixed indentations and lines > 80 characters
- Replace '16' with 'element_size' (from class definition) in
  Gtid_list_log_event()

The reason for the removal are:
- Generates more code
  - Storing and retreving THD
  - Causes extra code and daata to be generated to handle possible throw
    exceptions (which never happens in MariaDB code)
- Uses more stack space

Other things:
- Changed convert_const_to_int() to use item->save_in_field_no_warnings(),
  which made the code shorter and simpler.
- Removed not needed code in Sp_handler::sp_create_routine()
- Added thd as argument to store_key.copy() to make function simpler
- Added thd as argument to some subselect* constructor that inherites
  from Item_subselect.

- Updated error messages for recovery
- Changed printing of debug sync point information to make it fit 80 char

Other things:
- Updated code comments & fixed indentation
- Removed an old QQ (temporary) comment that does not apply anymore

Author: woqutech

This is needed as we are using uint32 for allocated and current length.

TO_CHAR(expr, fmt)
- expr: required parameter, data/time/timestamp type expression
- fmt: optional parameter, format string, supports
  YYYY/YYY/YY/RRRR/RR/MM/MON/MONTH/MI/DD/DY/HH/HH12/HH24/SS and special
  characters. The default value is "YYYY-MM-DD HH24:MI:SS"

In Oracle, TO_CHAR() can also be used to convert numbers to strings, but
this is not supported. This will gave an error in this patch.

Other things:
- If format strings is a constant, it's evaluated only once and if there
  is any errors in it, they are given at once and the statement will abort.

Original author: woqutech
Lots of optimizations and cleanups done as part of review

MINUS is mapped to EXCEPT
One consequence of the patch is that MINUS becomes a reserved word in
Oracle mode.

Author: woqutech

SYS_GUID() returns same as UUID(), but without any '-'

author: woqutech

The ROWNUM() function is for SELECT mapped to JOIN->accepted_rows, which is
incremented for each accepted rows.
For Filesort, update, insert, delete and load data, we map ROWNUM() to
internal variables incremented when the table is changed.
The connection between the row counter and Item_func_rownum is done
in sql_select.cc::fix_items_after_optimize() and
sql_insert.cc::fix_rownum_pointers()

When ROWNUM() is used anywhere in query, the optimization to ignore ORDER
BY in sub queries are disabled. This was done to get the following common
Oracle query to work:
select * from (select * from t1 order by a desc) as t where rownum() <= 2;
MDEV-3926 "Wrong result with GROUP BY ... WITH ROLLUP" contains a discussion
about this topic.

LIMIT optimization is enabled when in a top level WHERE clause comparing
ROWNUM() with a numerical constant using any of the following expressions:
- ROWNUM() < #
- ROWNUM() <= #
- ROWNUM() = 1
ROWNUM() can be also be the right argument to the comparison function.

LIMIT optimization is done in two cases:
- For the current sub query when the ROWNUM comparison is done on the top
  level:
  SELECT * from t1 WHERE rownum() <= 2 AND t1.a > 0
- For an inner sub query, when the upper level has only a ROWNUM comparison
  in the WHERE clause:
  SELECT * from (select * from t1) as t WHERE rownum() <= 2

In Oracle mode, one can also use ROWNUM without parentheses.

Other things:
- Fixed bug where the optimizer tries to optimize away sub queries
  with RAND_TABLE_BIT set (non-deterministic queries). Now these
  sub queries will not be converted to joins.  This bug fix was also
  needed to get rownum() working inside subqueries.
- In remove_const() remove setting simple_order to FALSE if ROLLUP is
  USED. This code was disable a long time ago because of wrong assignment
  in the following code.  Instead we set simple_order to false if
  RAND_TABLE_BIT was used in the SELECT list.  This ensures that
  we don't delete ORDER BY if the result set is not deterministic, like
  in 'SELECT RAND() AS 'r' FROM t1 ORDER BY r';
- Updated parameters for Sort_param::init_for_filesort() to be able
  to provide filesort with information where the number of accepted
  rows should be stored
- Reordered fields in class Filesort to optimize storage layout
- Added new error messsage to tell that a function can't be used in HAVING
- Added field 'with_rownum' to THD to mark that ROWNUM() is used in the
  query.

Co-author: Oleksandr Byelkin <sanja@mariadb.com>
           LIMIT optimization for sub query

Rename deactivate_ddl_log_entry to ddl_log_increment_phase

Part of prepration for: MDEV-17567 Atomic DDL

No notable code changes except moving code around

DROP TABLE opens all temporary tables at start, but then
uses find_temporary_table() to check if a table is temporary
instead of is_temporary_table() which is much faster.

This patch fixes this issue.

- Moved out creating StringBuffers in loops and instead create them
  outside and just reset the buffer if it was not allocated (to avoid
  a possible malloc/free for every entry)

Other things related to set_buffer_if_not_allocated()
- Changed Valuebuffer to not call set_buffer_if_not_allocated() when
  it is created.
- Fixed geometry functions to reset string length before calling
  String::reserve().  This is because one should not access length()
  of an undefined.
- Added Item_func_conv_charset::save_in_field() as the item is using
  str_value to store cached values, which conflicts with
  Item::save_str_in_field().
- Changed Item_proc_string to not store the string value in sql_string
  as this clashes with Item::save_str_in_field().
- Locally store value of full_name_cstring() in analyse::end_of_records()
  as Item::save_str_in_field() may overwrite it.
- Marked some strings as set_thread_specific()
- Added String::free_buffer() to be used internally in String functions
  to just free the buffer but not reset other String values.
- Fixed uses_buffer_owned_by() to check for allocated length instead of
  strlength, which could be marked MEM_UNDEFINED().

This change removed 68 explict strlen() calls from the code.

The following renames was done to ensure we don't use the old names
when merging code from earlier releases, as using the new variables
for print function could result in crashes:
- charset->csname renamed to charset->cs_name
- charset->name renamed to charset->coll_name

Almost everything where mechanical changes except:
- Changed to use the new Protocol::store(LEX_CSTRING..) when possible
- Changed to use field->store(LEX_CSTRING*, CHARSET_INFO*) when possible
- Changed to use String->append(LEX_CSTRING&) when possible

Other things:
- There where compiler issues with ensuring that all character set names
  points to the same string: gcc doesn't allow one to use integer constants
  when defining global structures (constant char * pointers works fine).
  To get around this, I declared defines for each character set name
  length.