No conflicts

Assertion `bitmap_is_set_all(&table->s->all_set)' failed in
handler::ha_reset

This followup fixes the compilation warning
  'test_bit' may be used uninitialized in this function
introduced by the previous patch.

Removes SHOW NEW MASTER statement and all related code.
Also removes the unused function update_slave_list from repl_failsafe.cc.


mysql-test/r/signal_code.result:
  Updated result file.
  The output of SHOW PROCEDURE CODE has changed, because the numerical values
  of some SQLCOM_ commands have changes. This is not a problem, because
  SHOW PROCEDURE CODE only exists in debug builds and the numerical values of
  SQLCOM_ constants are not exposed elsewhere.
mysql-test/r/sp-code.result:
  Updated result file.
  The output of SHOW PROCEDURE CODE has changed, because the numerical values
  of some SQLCOM_ commands have changes. This is not a problem, because
  SHOW PROCEDURE CODE only exists in debug builds and the numerical values of
  SQLCOM_ constants are not exposed elsewhere.
sql/mysqld.cc:
  Remove SQLCOM_SHOW_NEW_MASTER.
sql/repl_failsafe.cc:
  Remove show_new_master, which was only used by the removed SHOW NEW MASTER statement.
  Remove translate_master, which was only used by show_new_master.
  Remove find_slave_event, which was only used by translate_master.
  Remove find_target_pos, which was only used by translate_master.
  Remove cmp_master_pos, which was only used by translate_master.
  Remove update_slave_list, which was not used at all.
sql/repl_failsafe.h:
  Remove declarations of functions removed by this patch:
    update_slave_list, show_new_master, translate_master, update_slave_list
  
  Remove declarations of functions that did not exist before this patch:
    handle_failsafe_rpl, load_master_data
  
  Remove declaration of function that is static in slave.cc:
    connect_to_master
sql/sp_head.cc:
  Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_lex.h:
  Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_parse.cc:
  Removed SQLCOM_SHOW_NEW_MASTER
sql/sql_repl.cc:
  Removed cmp_master_pos(char*,ulonglong,char*,ulonglong), which was
  only used by cmp_master_pos*Slave_log_event* sev, LEX_MASTER_INFO* mi) in repl_failsafe.cc,
  which has been removed.
sql/sql_repl.h:
  removed cmp_master_pos
sql/sql_yacc.yy:
  removed syntax SHOW NEW MASTER.

Text conflict in include/my_bit.h
Text conflict in include/my_bitmap.h
Text conflict in mysys/my_bitmap.c

Assertion `bitmap_is_set_all(&table->s->all_set)' failed in
handler::ha_reset

This assertion could be triggered if two connections simultaneously
executed two bitmap test functions on the same bitmap. For example,
the assertion could be triggered if one connection executed UPDATE
while a second connection executed SELECT on the same table.

Even if bitmap test functions have read-only semantics and have
const bitmaps as parameter, several of them modified the internal
state of the bitmap. With interleaved execution of two such functions
it was possible for one function to modify the state of the same
bitmap that the other function had just modified. This lead to an
inconsistent state and could trigger the assert.

Internally the bitmap uses 32 bit words for storage. Since bitmaps
can contain any number of bits, the last word in the bitmap may
not be fully used. A 32 bit mask is maintained where a bit is set
if the corresponding bit in the last bitmap word is unused.
The problem was that several test functions applied this mask to
the last word. Sometimes the mask was negated and used to zero out
the remainder of the last word and sometimes the mask was used as-is
to fill the remainder of the last word with 1's. This meant that if
a function first used the negated mask and another function then
used the mask as-is (or vice-versa), the first function would then
get the wrong result.

This patch fixes the problem by changing the implementation of
9 bitmap functions that modified the bitmap state even if the 
bitmap was declared const. These functions now preserve the
internal state of the bitmap. This makes it possible for
two connections to concurrently execute two of these functions
on the same bitmap without issues.

The patch also removes dead testing code from my_bitmap.c.
These tests have already been moved to unittest/mysys/bitmap-t.c.
Existing test coverage of my_bitmap has been extended.

No MTR test case added as this would require adding several sync
points to the bitmap functions. The patch has been tested with
a non-deterministic test case posted on the bug report.


include/my_bit.h:
  Removed my_count_bits_ushort() which is not needed anymore.
  Added my_count_bits_uint32().
unittest/mysys/bitmap-t.c:
  Extended test coverage of my_bitmap.

extra/comp_err.c:
  Initialize er_last to zero (which is the correct value if we never enter the loop).

post-push fix: make it work in out-of-source builds.

mysql-test/mysql-test-run.pl:
  Set MYSQL_BINDIR, to be used by tests.
mysql-test/t/file_contents.test:
  Use MYSQL_BINDIR, which is different from MYSQL_LIBDIR for out-of-source builds.

fix for bug @59888.

create spatial index on char > 31 bytes". Did after-merge
fixes.

  
Backporting the patch from BUG#11753506 into mysql-5.5 
as it is already in mysql-trunk but not in mysql-5.5.

Backporting the patch from BUG#11753489 into mysql-5.5 
as it is already in mysql-trunk but not in mysql-5.5.

attempt to create spatial index on char > 31 bytes".

Attempt to create spatial index on char field with length
greater than 31 byte led to assertion failure on server
compiled with safemutex support.

The problem occurred in mi_create() function which was called
to create a new version of table being altered. This function
failed since it detected an attempt to create a spatial key
on non-binary column and tried to return an error.
On its error path it tried to unlock THR_LOCK_myisam mutex
which has not been not locked at this point. Indeed such an
incorrect behavior was caught by safemutex wrapper and caused
assertion failure.

This patch fixes the problem by ensuring that mi_create()
doesn't releases THR_LOCK_myisam mutex on error path if it was
not acquired.

mysql-test/r/gis.result:
  Added test for bug @59888 "debug assertion when attempt to
  create spatial index on char > 31 bytes".
mysql-test/t/gis.test:
  Added test for bug @59888 "debug assertion when attempt to
  create spatial index on char > 31 bytes".
storage/myisam/mi_create.c:
  Changed mi_create() not to release THR_LOCK_myisam mutex on
  error path if it was not acquired.

Assert in Diagnostics_area::set_ok_status() for XA COMMIT

This assert was triggered if XA COMMIT was issued when an XA transaction
already had encountered an error (e.g. a deadlock) which required
the XA transaction to be rolled back.

In general, the assert is triggered if a statement tries to send OK to
the client when an error has already been reported. It was triggered
in this case because the trans_xa_commit() function first reported an
error, then rolled back the transaction and finally returned FALSE,
indicating success. Since trans_xa_commit() reported success,
mysql_execute_command() tried to report OK, triggering the assert.

This patch fixes the problem by fixing trans_xa_commit() to return TRUE
if it encounters an error that requires rollback, even if the rollback
itself is successful.

Test case added to xa.test.

With this change, there will be new files "INFO_SRC"
and "INFO_BIN", which describe the source and the
binaries.
They will be contained in all packages:
- in "tar.gz" and derived packages, in "docs/",
- in RPMs, in "/usr/share/doc/packages/MySQL-server".

"INFO_SRC" is also part of a source tarball.
It gives the version as exact as possible, preferably
by calling "bzr version-info" on the source tree.
If that is not possible, it just contains the three
level version number.

"INFO_BIN" contains some info when and where the
binaries were built, the options given to the compiler,
and the flags controlling the included features.

The tests (test "mysql" in the main suite) are extended
to verify the existence of both "INFO_SRC" and "INFO_BIN",
as well as some of the expected contents.


CMakeLists.txt:
  For the new files describing the source and the build
  ("INFO_SRC" and "INFO_BIN"), we need a new file
  "cmake/info_macros.cmake.in" with the build rules.
  
  1) This file must be configured with the current variables.
  
  2) "INFO_SRC" can be created during the cmake phase,
     but this should be repeated with each "make" to
  protect against a developer doing only "make" after
  a "bzr pull" (or "bzr commit").
  So have it both as a cmake rule and as a custom target.
  
  3) "INFO_BIN" must be created during the make phase
     only, because it contains information from files
  which will be written at the end of the cmake phase only.
  Therefore, it must be a custom target which is included
  in all "make" targets.
  
  4) The resulting "INFO_*" files must be included in packages.
cmake/info_bin.cmake:
  This is the file to create "INFO_BIN",
  by calling the "CREATE_INFO_BIN()" macro.
  
  It must be a separate file, so that the macro
  definitions can be included in other cmake scripts
  without that file inclusion causing a side effect,
  the macro call.
  That call would modify the source tree which should
  be trated read-only.
cmake/info_macros.cmake.in:
  This new file contains the macros to create the
  "INFO_*" files during various steps of the build,
  the calls will be at other places.
  
  1) For source: If running from a BZR tree, always create
     (update) "INFO_SRC" by running "bzr version-info".
     Outside a BZR tree, try to take it from exported
     sources, and create it only if missing, in that
     case put the three level version number into it.
  
  2) "INFO_BIN" contains
     - date/time and host name of the build host,
     - information about the platform,
     - information about the C and CXX compiler
       and the options given to them (Unix only),
     - the feature flags as reported by "cmake -L".
cmake/info_src.cmake:
  This is the file to create "INFO_SRC",
  by calling the "CREATE_INFO_SRC()" macro.
  
  It must be a separate file, so that the macro
  definitions can be included in other cmake scripts
  without that file inclusion causing a side effect,
  the macro call.
  That call would modify the source tree which should
  be trated read-only.
cmake/make_dist.cmake.in:
  Create a "VERSION_src" file during "make dist".
  
  In case it already exists from a preceding "cmake" run
  or tree export (which is quite likely), a new
  "make dist" must not modify it.
mysql-test/r/file_contents.result:
  Result of test for bug#42969.
mysql-test/t/file_contents.test:
  Perl test scriptlet for bug#42969.
support-files/mysql.spec.sh:
  Add "INFO_SRC" and "INFO_BIN" to the RPM contents.

An after-fix to workaround different metadata in "mtr --ps" output.

batch_readline_init() was modified - make check for 
type of file for input stream unless target platform
is WINDOWS since on this platform S_IFBLK is undefined.

Reverse DNS lookup of "localhost" returns "broadcasthost" on Snow Leopard (Mac), and NULL on most others.
Simply ignore the output, as this is not an essential part of UDF testing.

batch_readline_init() was modified - return an error
if the input source is a directory or a block device.

This follow-up is necessary because on some platforms,
such as Solaris, call to read() from directory may be
successful.

Test failed on a certain Linux platform in automated environment. It turns out that this platform has an old version of Perl modules DBI and DBD::mysql installed, as well as the OS itself being relatively old.
Allowing error code 11 to be returned from mysqlhotcopy on expected error seems harmless and will make the test pass also with older libraries.

Removed the collections for mysql-5.1-bugteam. Removed 1st from weekly. This is part of default suites

Removed the collections for mysql-5.1-bugteam. Removed 1st from weekly. This is part of default suites

This warning also happens in 5.1 with a slightly different codepath.

Added --debug-server and use $opt_debug_server where appropriate
Let --debug imply --debug-server
When merging to 5.5, must adapt fix for 59148
Oops, set debug => debug-server too late, fixed

      
Also fix bug#59110: Memory leak of QUICK_SELECT_I allocated memory.
Includes Jørgen Lølands review comments.
      
Root cause of these bugs are that test_if_skip_sort_order() decided to
revert the 'skip_sort_order' descision (and use filesort) after the
query plan has been updated to reflect a 'skip' of the sort order.
      
This might happen in 'check_reverse_order:' if we have a 
select->quick which could not be made descending by appending 
a QUICK_SELECT_DESC. ().
      
The original 'save_quick' was then restored after the QEP has been modified,
which caused:
      
  - An incorrect 'precomputed_group_by= TRUE' may have been set, 
    and not reverted, as part of the already modifified QEP (Bug#59308)
  - A 'select->quick' might have been created which we fail to delete (bug#59110).
      
This fix is a refactorication of test_if_skip_sort_order() where all logic
related to modification of QEP (controlled by argument 'bool no_changes'), is
moved to the end of test_if_skip_sort_order(), and done after *all* 'test_if_skip'
checks has been performed - including the 'check_reverse_order:' checks.
      
The refactorication above contains now intentional changes to the logic which 
has been moved to the end of the function.
      
Furthermore, a smaller part of the fix address the handling of the 
select->quick objects which may already exists when we call 
'test_if_skip_sort_order()' (save_quick) -and
new select->quick's created during test_if_skip_sort_order():
      
  - Before new select->quick may be created by calling ::test_quick_select(), we
    set 'select->quick= 0' to avoid that ::test_quick_select() prematurely
    delete the save_quick's. (After this call we may have both a 'save_quick' 
    and 'select->quick')
      
  - All returns from ::test_if_skip_sort_order() where we may have both a
    'save_quick' and a 'select->quick' has been changed to goto's to the
    exit points 'skiped_sort_order:' or 'need_filesort:' where we
    decide which of the QUICK_SELECT's to keep, and delete the other.

used (--with-zlib-dir=bundled) then there is no libz.so involved.

Correcting clean up command at the start of test.

if the standard input is a directory.

The problem is that mysql monitor try to read from stdin without
checking input source type.

The solution is to stop reading data from standard input if a call
to read(2) failed.

A new test case was added into mysql.test.

client/my_readline.h:
  Data members error and truncated was added to LINE_BUFFER structure.
  These data members used instead of out parameters in functions
  batch_readline, intern_read_line.
client/mysql.cc:
  read_and_execute() was modified: set status.exit_status to 1
  when the error occured while reading the next command line in
  non-interactive mode. Also the value of the truncated attribute
  of structure LINE_BUFF is taken into account only for non-iteractive mode.
client/readline.cc:
  intern_read_line() was modified: cancel reading from input if
  fill_buffer() returns -1, e.g. if call to read failed.
  batch_readline was modified: set the error data member of LINE_BUFFER
  structure to value of my_errno when system error happened during call
  to my_read/my_realloc.
mysql-test/t/mysql.test:
  Test for bug#57450 was added.