Remove duplicated output and change output level to info.

that must not send a response

Problem:- When using wsrep (w/ galera) and issuing commands that can
cause deadlocks, deadlock exception errors are sent in responses to
commands such as close prepared statement and close connection which,
by spec, must not send a response.

Solution:- In dispatch_command, we will handle COM_QUIT and COM_STMT_CLOSE
commands even in case of error.

Patch Credit:- Jaka Močnik

Adjust the 10.1 tests innodb.doublewrite and innodb.101_compatibility
in the same way.

As noted in MDEV-8841, any test that kills the server must issue
FLUSH TABLES, so that tables of crash-unsafe storage engines will
not be corrupted. Consistently issue this statement after any
call mtr.add_suppression() calls.

Also, do not invoke shutdown_server directly, but use helpers instead.

Do not kill the server after call mtr.add_suppression(), because
the procedure modifies a crash-unsafe table, and we do not want to
corrupt that table.

crashes server

This bug is the result of merging the Oracle MySQL follow-up fix
BUG#22963169 MYSQL CRASHES ON CREATE FULLTEXT INDEX
without merging the base bug fix:
Bug#79475 Insert a token of 84 4-bytes chars into fts index causes
server crash.

Unlike the above mentioned fixes in MySQL, our fix will not change
the storage format of fulltext indexes in InnoDB or XtraDB
when a character encoding with mbmaxlen=2 or mbmaxlen=3
and the length of a word is between 128 and 84*mbmaxlen bytes.
The Oracle fix would allocate 2 length bytes for these cases.

Compatibility with other MySQL and MariaDB releases is ensured by
persisting the used maximum length in the SYS_COLUMNS table in the
InnoDB data dictionary.

This fix also removes some unnecessary strcmp() calls when checking
for the legacy default collation my_charset_latin1
(my_charset_latin1.name=="latin1_swedish_ci").

fts_create_one_index_table(): Store the actual length in bytes.
This metadata will be written to the SYS_COLUMNS table.

fts_zip_initialize(): Initialize only the first byte of the buffer.
Actually the code should not even care about this first byte, because
the length is set as 0.

FTX_MAX_WORD_LEN: Define as HA_FT_MAXCHARLEN * 4 aka 336 bytes,
not as 254 bytes.

row_merge_create_fts_sort_index(): Set the actual maximum length of the
column in bytes, similar to fts_create_one_index_table().

row_merge_fts_doc_tokenize(): Remove the redundant parameter word_dtype.
Use the actual maximum length of the column. Calculate the extra_size
in the same way as row_merge_buf_encode() does.

InnoDB would refuse to start up if there is a mismatch on
the size of the system tablespace files. However, before this
check is conducted, the system tablespace may already have been
heavily modified.

InnoDB should perform the size check as early as possible.

recv_recovery_from_checkpoint_finish():
Move the recv_apply_hashed_log_recs() call to
innobase_start_or_create_for_mysql().

innobase_start_or_create_for_mysql(): Test the mutex functionality
before doing anything else. Use a compile_time_assert() for a
sizeof() constraint. Check the size of the system tablespace as
early as possible.

Minor typo

recv_scan_log_recs(): Remember if redo log apply is needed,
even if starting up in innodb_read_only mode.

recv_recovery_from_checkpoint_start_func(): Refuse
innodb_read_only startup if redo log apply is needed.

Merge branch '10.1-MDEV-11866-ANALYZE-FORMAT=JSON-volatility-normalise' of git://github.com/grooverdan/mariadb-server into grooverdan-10.1-MDEV-11866-ANALYZE-FORMAT=JSON-volatility-normalise

Revert "MDEV-7409 On RBR, extend the PROCESSLIST info to include at least the name of the recently used table"

This reverts commit 15f46d51.

MDEV-11108: Assertion `uniq_tuple_length_arg <= table->file->max_key_length()' failed in SJ_TMP_TABLE::create_sj_weedout_tmp_table

Removed the assert from the if clause to the else clause.

MDEV-7409 On RBR, extend the PROCESSLIST info to include at least the name of the recently used table

When RBR is used, add the db name to db Field and table name to Status
Field  of the "SHOW FULL PROCESSLIST" command for SQL thread.

[0-9]*[.]?[0-9]* wasn't a sufficient regex to cover the
%lg used in Json_writer::add_double. Exponent formats
where missed.

Here we normalize all the replace_regex expressions for
ANALYZE FORMAT=JSON into one include file.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>

at the start 759654123 and the end 0 do not match."

For page compressed and encrypted tables log sequence
number at end is not stored, thus disable this message
for them.

In a subquery, we don't have to maintain order
Added a fix such that order is considered when there is a limit clause.

Problem:- When setting max_binlog_stmt_cache_size=18446744073709547520
from either command line or .cnf file, server fails to start.

Solution:- Added one more function eval_num_suffix_ull , which uses
strtoull to get unsigned ulonglong from string. And getopt_ull calls this
function instead of eval_num_suffix. Also changed previous eval_num_suffix to
eval_num_suffix_ll to remain consistent.

Change default to zlib, this has effect only if user has
explicitly requested page compression and then user
naturally expects that pages are really compressed
if they can be compressed.

restarting server with encryption and read-only

buf0buf.cc: Temporary slots used in encryption was calculated
by read_threads * write_threads. However, in read-only mode
write_threads is zero. Correct way is to calculate
(read_threads + write_threads) * max pending IO requests.

in Item_partition_func_safe_string(THD *thd, const char *name_arg,
uint length, CHARSET_INFO *cs= NULL), the 'name_arg' is the value
of the string constant and 'length' is the length of this constant,
so length == strlen(name_arg).

check_that_all_fields_are_given_values() relied on write_set,
but was run too early, before triggers updated write_set.

also, when triggers are present, fields might get values conditionally,
so we need to check that all fields are given values for every row.

1. don't put generated files into ${CMAKE_CURRENT_SOURCE_DIR}
2. policy file name must match the module name (Fedora 24 requirement)

In Debian, the default install is made more secure by omitting the anonymous
user and by making the root account authenticate by unix socket
authentication instead of the default password-less root. However, Debian
hard-codes this change in mysql_install_db, which breaks that program for
other users.

This commit instead implements new general options for mysql_install_db that
can be used by anyone to similarly perform a more secure install:

  --skip-auth-anonymous-user: omits the anonymous user.

  --auth-root-authentication-method=normal: Keeps the existing behaviour
    with a password-less root account. Currently on by default.

  --auth-root-socket-user=USER
  --auth-root-authentication-method=socket: creates the MariaDB root user
    with the name USER (defaults to 'root') and using unix socket
    authentication. This way, only that user has MariaDB root access
    after install.

The idea with --auth-root-authentication-method=normal is that
applications that need this behaviour can give that option explicitly.
Then eventually we could make --auth-root-authentication-method=socket
the default, giving a more secure default installation.

Note that it is perfectly possible to do a secure install with
--auth-root-authentication-method=normal. For example, installing a
private server just for local access by a single OS-level user, by
using --skip-networking and putting the connection socket in a
location without public access. So it is important to preserve this
API for backwards compatibility.

        strict_password_validation variable now has
        no effect in the slave thread.

Gtid_list_log_event::do_apply_event() did not free_root(thd->mem_root).
It can allocate on this in record_gtid(), and in some scenarios there is
nothing else that does free_root(), leading to temporary memory leak until
stop of SQL thread. One scenario is in circular replication with only one
master active. The active master receives only its own events on the slave,
all of which are ignored. But whenever the SQL thread catches up with the IO
thread, a Gtid_list_log_event is applied, leading to the leak.

* Remove duplicate lines from tests
* Use thd instead of current_thd
* Remove extra wsrep_binlog_format_names
* Correctly merge union patch from 5.5 wrt duplicate rows.
* Correctly merge SELinux changes into 10.1

The function fsp_flags_try_adjust(), which is called on startup,
is incrementing the Innodb_pages0_read counts for every affected file.
Adjust the result of encryption.innodb_lotoftables accordingly.

Make sure printing with snprintf uses the correct typed parameters.