------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
  Bug#36649: Condition area is not properly cleaned up after stored routine invocation

  The problem is that the diagnostics area of a trigger is not
  isolated from the area of the statement that caused the trigger
  invocation. In MySQL terms, it means that warnings generated
  during the execution of the trigger are not removed from the
  "warning area" at the end of the execution.

  Before this fix, the rules for MySQL message list life cycle (see
  manual entry for SHOW WARNINGS) did not apply to statements
  inside stored programs:

    - The manual says that the list of messages is cleared by a
      statement that uses a table (any table). However, such
      statement, if run inside a stored program did not clear the
      message list.
    - The manual says that the list is cleared by a statement that
      generates a new error or a warning, but this was not the case
      with stored program statements either and is changed to be the
      case as well.

  In other words, after this fix, a statement has the same effect
  on the message list regardless of whether it's executed inside a
  stored program/sub-statement or not.

  This introduces an incompatible change:

    - before this fix, a, e.g. statement inside a trigger could
      never clear the global warning list
    - after this fix, a trigger that generates a warning or uses a
      table, clears the global warning list
    - however, when we leave a trigger or a function, the caller's
      warning information is restored (see more on this below).

  This change is not backward compatible as it is intended to make
  MySQL behavior similar to the SQL standard behavior:

  A stored function or trigger will get its own "warning area" (or,
  in standard terminology, diagnostics area).  At the beginning of
  the stored function or trigger, all messages from the caller area
  will be copied to the area of the trigger.  During execution, the
  message list will be cleared according to the MySQL rules
  described on the manual (SHOW WARNINGS entry).  At the end of the
  function/trigger, the "warning area" will be destroyed along with
  all warnings it contains, except that if the last statement of
  the function/trigger generated messages, these are copied into
  the "warning area" of the caller.

  Consequently, statements that use a table or generate a warning
  *will* clear warnings inside the trigger, but that will have no
  effect to the warning list of the calling (outer) statement.

Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.

------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
  Bug #47304 Test main.mdl_sync fails on embedded server

  The problem was that SHOW PROCESSLIST was trying to access
  a thread that was not properly running and therefore had an 
  uninitialized mutex.

  This patch explicitly resets thd->mysys_var after each embedded
  server command to prevent the mutex from being accessed in an
  illegal state.

  The patch also re-enables lock_multi.test and mdl_sync.test for 
  embedded server as they had been disabled because of this bug.

------------------------------------------------------------
revno: 2617.31.21
revision-id: davi.arnaut@sun.com-20090402193933-2zbhg15kd0z3xh8r
parent: alik@sun.com-20090402081500-78l1hpkx03twe4bf
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41971-6.0
timestamp: Thu 2009-04-02 16:39:33 -0300
message:
  Bug#41971: Thread state on embedded server is always "Writing to net"
 
  The problem is that the state of a thread on a embedded server is
  always displayed as "Writing to net", which is wrong as there is
  no "network" in the embedded server.

  The solution is only exclude, on a embedded server, the thread
  state conditions that are related to network operations. Other
  thread states related to waiting on conditions or other operations
  are preserved.

SIGWINCH is not defined in termios.h on HP/UX.

  
Added this option, named as "--dump-slave". The purpose of this option is to be
able to produce a dump from a slave used for making backups of the master. Originally,
dumping from the main master was fine, but as more data accumulated, the dump process
would take over 30 minutes, locking up the master database hence website for 30 minutes.
A slave dedicated to producing backups was the answer, but I needed a dump that could be

used to restore a slave instantly and in order to do that, it has to have three things 
contained in the dump:
  
  1. "STOP SLAVE;" at the beginning
  2. "CHANGE MASTER TO ...<the master - info from 'show slave status'>"
  3. "START SLAVE;" at the end
  
These options in this changeset contain this.
  
  --stop-slave adds "STOP SLAVE" to the beginning of the dump and "STOP SLAVE" 
  to the end of the dump.
  
  --include-host gives the user the option to have the host explicitely added
  to the "CHANGE MASTER TO ..." line.
  
  --dump-slave adds the "CHANGE MASTER ..." to the dump representing not the slave's
  master binlog info, but the slave's master's info from "SHOW SLAVE STATUS" 

  
Feature from Eric Bergen, CLA signed 2007-06-27.
  
Adds new mysql client option "--auto-vertical-output", which causes
the client to test whether a result table is too wide for the current
window (where available) and emit vertical results in that case.
Otherwise, it sends normal tabular results.

           deadlocks

Backport of revno: 2617.68.35

The problem was that if one connection is running a multi-statement 
transaction which involves a single partitioned table, and another 
connection attempts to alter the table to drop a non-existing partition,
(which of course will fail), the first connection still gets 
ER_LOCK_DEADLOCK and cannot proceed anymore.

This bug is no longer reproducable. This has also been tested with the
patch for Bug#46654 "False deadlock on concurrent DML/DDL with partitions, 
inconsistent behavior" which concerned a similar problem but where the 
ALTER TABLE is semantically correct.

Test case added in partition_sync.test.

      
Another code-path dropped sign of TIME, presuming all time is positive.
      
Minds sign now. Patch depends on ChangeSet for 42661.

Bug#42662: maketime() and signedness
      
Item_time_typecast::val_int() dropped sign from
MYSQL_TIME gotten using from get_time().
      
Propagates sign now.


Backported to 5.5.0  (6.0-codebase revid: 1810.3897.1)

      
When less than six places are given for microseconds, we zerofill from
the right (leftmost place is always 1/10s). We only did this when all
announced date/time fields were given; now we also format fractional
seconds when more significant fields are left out.

  
The presence of "--skip" parameters is obscure, when it should be
obvious from the text.
  
Now, for boolean options, when they're default to ON and the --skip
is more useful parameter, then tell the user of its existence.

Backported from 6.0-codebase, revid  2572.14.1

```---------------------------------------------------------
revno: 2599.178.12
revision-id: alik@mysql.com-20080812161845-we7cx9f22yrghob1
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-build
timestamp: Tue 2008-08-12 20:18:45 +0400
message:
  Fix memory leak.
```

---------------------------------------------------------

Backport for 5.5

In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.

These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working

For debug builds (./configure --with-debug), nothing is changed.

Backport for 5.5

Backport to 5.5

      
When the query cache is disabled, the server shouldn't attempt to take the 
query cache mutex.
                             
By using the command line option --query_cache_type=0, the user can disable
   
(backport from mysql-pe)

per-file comments:
  mysql-test/r/mysql_upgrade.result
     result updated
  mysql-test/t/mysql_upgrade.test
     --skip-verbose option added to the call

Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.

   (backport)
   mysql_upgrade script accepts --upgrade-system-tables option,
   fixing only system tables in this case.

per-file comments:
  client/mysql_upgrade.c
WL#4991 mysql_upgrade --fix-privilege-tables
    --upgrade-system-tables option added.
   if it is set, the tool won't look for the mysqlcheck then
   run_mysqlcheck_fixnames() and run_mysqlcheck_upgrade won't be called.
  mysql-test/r/mysql_upgrade.result
WL#4991 mysql_upgrade --fix-privilege-tables
    test result added
  mysql-test/t/mysql_upgrade.test
WL#4991 mysql_upgrade --fix-privilege-tables
    test case added

Disabled execution of this test for embedded server until fix for
bug 41971 'Thread state on embedded server is always "Writing to net"'
is back-ported to this tree.

clean up message list).