mtr_t::modify(): Set the m_made_dirty flag if needed,
so that buf_pool_t::insert_into_flush_list() will be invoked
while holding log_sys.flush_order_mutex.

This is something that was should have been part of
commit b212f1da (MDEV-22107).

mtr_t::is_empty(): Replaces mtr_t::get_log() and mtr_t::get_memo().

mtr_t::get_log_size(): Replaces mtr_t::get_log().

mtr_t::print(): Remove, unused function.

ReleaseBlocks::ReleaseBlocks(): Remove an unused parameter.

- Fixed wrong DBUG_ASSERT when waiting for big-block-read
- Update S3_pagecache_reads counter when reading a block from S3.
  Before this patch the variable value was always 0

Reviewer: Oleksandr Byelkin <sanja@mariadb.com>

The assert happens in 10.6 with the following command:

./mtr --no-reorder --verbose-restart main.update_ignore_216 main.upgrade_MDEV-19650 main.upgrade_MDEV-23102-1 main.upgrade_MDEV-23102-2 main.upgrade_geometrycolumn_procedure_definer main.upgrade_mdev_24363 main.varbinary sys_vars.aria_log_file_size_basic

Reviewer: Oleksandr Byelkin <sanja@mariadb.com>

comp_thread_ctxt_t: Remove ctrl_mutex, ctrl_cond, started. We do not
actually need them for anything.

destroy_worker_thread(): Split from destroy_worker_threads().

create_worker_threads(): We already initialize
thd->data_avail=FALSE and thd->cancelled=FALSE before
invoking pthread_create(). If any thread creation fails,
clean up by destroy_worker_thread().

compress_worker_thread_func(): Assume that thd->started and
thd->data_avail are already initialized.

Reviewed by: Vladislav Vaintroub

ER_CHECK_NO_SUCH_TABLE was raised because a view does not have
the corresponding TABLE instance connected to TABLE_LIST and the
server interprets the absence as the absence of the table itself.

To fix the problem, we add a check to ensure that the target table
to be swapped with a partition is not a view.

Reviewed by: Nayuta Yanagisawa

MDEV-27862 Galera should replicate nextval()-related changes in sequences with INCREMENT <> 0, at least NOCACHE ones with engine=InnoDB

Sequence storage engine is not transactionl so cache will be written in
stmt_cache that is not replicated in cluster. To fix this replicate
what is available in both trans_cache and stmt_cache.

Sequences will only work when NOCACHE keyword is used when sequnce is
created. If WSREP is enabled and we don't have this keyword report error
indicting that sequence will not work correctly in cluster.

When binlog is enabled statement cache will be cleared in transaction
before COMMIT so cache generated from sequence will not be replicated.
We need to keep cache until replication.

Tests are re-recorded because of replication changes that were
introducted with this PR.
Reviewed-by: Jan Lindström <jan.lindstrom@mariadb.com>

wsrep_server_incoming_address function always returned value of the
wsrep_node_incoming_address even when actual incoming address
was resolved to inc_addr variable. Fixed by returning inc_addr
if it does contain incoming address.

no need to run all alter tests three times with no changes whatsoever

The symtom of the bug was that check table on an S3 table when using
--s3_slave-ignore-updates=1 could print "9 when updating keyfile"

If the connecting user doesn't have alter table privilege this isn't
allowed.

This patch removes enable / disable key commands that should never have been here

Closes #2002

For compatibility reasons, add the option to the MariaDB client without
any functional changes besides simply accepting the option and emitting
a warning that it is obsolete.

In MySQL this security related option is compulsory in certain use
cases. When users switch to MariaDB, this client command that used to
work starts failing without a sensible error message. In worst case
users resort to re-installing the mysql client from MySQL.

In MariaDB the option is obsolete and should simply be ignored. Users
however don't have any opportunity to learn that unless the client
program tells them so.

Before:

    mysql --enable-cleartext-plugin ...
    mysql: unknown option '--enable-cleartext-plugin'

    (program terminates)

After:

    mysql --enable-cleartext-plugin ...
    WARNING: option '--enable-cleartext-plugin' is obsolete.

    (program executes)

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.

srv_do_purge(): In commit edde1f6e
when the de-facto 32-bit trx_sys_t::history_size() was replaced with
32-bit trx_sys.rseg_history_len, some more variables were changed
from ulint (size_t) to uint32_t.

The history list length is the number of committed transactions whose
undo logs are waiting to be purged. Each TRX_RSEG_HISTORY list is
storing the number of entries in a 32-bit field and each transaction
will occupy at least one undo log page. It is thinkable that the
length of each TRX_RSEG_HISTORY list may approach the maximum
representable number. The number cannot be exceeded, because the
rollback segment header is allocated from the same tablespace as
the undo log header pages it is pointing to, and because the page
numbers of a tablespace are stored in 32 bits. In any case, it is
possible that the total number of unpurged committed transactions
cannot be represented in 32 but 39 bits (corresponding to
128 rollback segments and undo tablespaces).

page_cur_insert_rec_low(): When checking for common bytes with
the preceding record, exclude the header bytes of next_rec
that could have been updated by this function.

The scenario where this caused corruption was an insert of
a node pointer record. The child page number was written as
0x203 but recovered as 0x103 because the n_owned field of next_rec
was changed from 1 to 2 before the comparison was invoked.

- InnoDB fails to create a fts cache while loading the innodb fts
table which is stored in system tablespace. InnoDB should create
the fts cache while loading FTS_DOC_ID column from system column.

Backported fix from MariaDB 10.5

Test will fail if XML support is not compiled. This can happen if
XML support is disabled or if the libxml2 library is not installed.

This can happen if one doesn't have a working network connection when running
spider tests

MDEV-20888 : Galera test failure on galera.galera_pc_ignore_sb: 2013: Lost connection to MySQL server during query

Add debug info.

Add expected error.

MDEV-18283 : Galera test failure on galera.GCF-1081

Remove tests.

Commit introduces automatic detection which supported
Perl MariaDB DBI driver is available:

 * DBD::mysql
 * DBD::MariaDB

If nothing is then bail out and die

Current Detection prefers Perl DBD:MariaDB driver.

This is mainly for older Linux distros or Windows which does not
have Perl DBD:MariaDB packaged or does not want to use Perl cpan command.

Improve and add more languages for the ERROR 1476: Foreign Server
already exists.

When reading the man page of e.g. 'mysql' on a system with MariaDB
installed one would actually see the man page of 'mariadb'. However the
man page had no indication of the page being for 'mariadb', which was
confusing for users.

Fix this by updating the man page title lines to use mariadb-* instead
of mysql* for MariaDB binaries that are drop-in replacements for MySQL
equivalents, indicating that the commands are actually of the MariaDB
version.

In long term, all the commands in man pages should be replaced by their
MariaDB counterparts. Update the title lines as a start, and only those
that exist as symlinks to their MariaDB counterparts.

Before:

    man mariadb-upgrade | head -n 1
    MYSQL_UPGRADE(1) ...

After:

    man mariadb-upgrade | head -n 1
    MARIADB-UPGRADE(1) ...

All new code of the whole pull request, including one or several files
that are either new files or modified ones, are contributed under the
BSD-new license. I am contributing on behalf of my employer Amazon Web
Services, Inc.