into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  stella.local:/home2/mydev/mysql-5.0-axmrg

            from storage engine

Federated may crash a server, return wrong result set, return
"ERROR 1030 (HY000): Got error 1430 from storage engine" message
when local (engine=federated) table has a key against nullable
column.

The problem was wrong implementation of function that creates
WHERE clause for remote query from key.


mysql-test/r/federated.result:
  A test case for BUG#33946.
mysql-test/t/federated.test:
  A test case for BUG#33946.
sql/ha_federated.cc:
  Fixed that federated adds " IS NULL " condition to a remote query,
  whereas "IS NOT NULL" requested by original query.
  
  Fixed that federated didn't check for end of key buffer, didn't
  setup key buffer pointer and remaining lenght of key buffer,
  didn't add " AND " between conditions in case original query
  has IS [NOT] NULL condition against nullable column.
  
  Fixed that federated wrongly shifts key buffer pointer by extra
  one byte when key part may be null (was: store_length + 1,
  now: store_length).

empty result when using DESC

Problem: fetching MyISAM keys we copy a key block pointer to the end of the key buffer.
However, we don't take into account the pointer length calculatig the buffer size,
that may leads to memory overwriting and in turn to unpredictable results.

Fix: increase key buffer size by length of the key block pointer.

Note: no simple test case.


myisam/mi_open.c:
  Fix for bug #33758: Got query result when using ORDER BY ASC, but 
  empty result when using DESC
    - increase possible maximum key length by size of the key block pointer,
      as it's copied into the key buffer in the get_key() MyISAM functions.

into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  dipika.(none):/opt/local/work/mysql-5.0-runtime

The unsignedness of large integer user variables was not being
properly preserved when feeded to prepared statements. This was
happening because the unsigned flags wasn't being updated when
converting the user variable is converted to a parameter.

The solution is to copy the unsigned flag when converting the
user variable to a parameter and take the unsigned flag into
account when converting the integer to a string.


mysql-test/r/binlog.result:
  Add test case result for Bug#33798
mysql-test/r/ps.result:
  Add test case result for Bug#33798
mysql-test/t/binlog.test:
  Add test case for Bug#33798
mysql-test/t/ps.test:
  Add test case for Bug#33798
sql/item.cc:
  Take the unsigned flag into account when converting the
  user variable.

into  pilot.mysql.com:/data/msvensson/mysql/mysql-5.0-runtime


client/mysqltest.c:
  Auto merged

mysql-test/r/rpl_user.result:
  Result change.

mysql-test/t/rpl_user.test:
  Removing redundant reset master and deleting users from master
  and slave without using binary log.

into  mysql_cab_desk.:D:/source/c++/mysql-5.0-rpl-merge

This patch adds code to convert the path for LOAD DATA INFILE 
events to a Unix path which is needed for running mysql client
on Windows. 


client/mysqlbinlog.cc:
  BUG#32205 : Replaying statements from mysqlbinlog fails with a syntax error, replicates fine
  
  This patch adds code to convert the path for LOAD DATA INFILE 
  events to a Unix path which is needed for running mysql client
  on Windows. 
  
  The 'd:\x\y\z' path becomes 'd:xyz' when run in the client.

on the context.


mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Blanking out yet some numbers in file names.

mysql-test/r/mysqlbinlog.result:
  Result file change.
mysql-test/t/mysqlbinlog.test:
  Fixing test to not be dependent on the sequence numbers
  for file names generated by mysqlbinlog.

mysql-test/r/mix_innodb_myisam_binlog.result:
  Result change
mysql-test/t/binlog_start_comment.test:
  Adding --local-load to mysqlbinlog to prevent it from failing
  on Windows. Also adding --short-form.
mysql-test/t/mix_innodb_myisam_binlog.test:
  Extending LIKE pattern to use either \n or \r\n in order to work
  on Windows.

mysql-test/t/binlog_start_comment.test:
  Adding --local-infile=1 to enable local infile for mysql client.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
sql/log.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged

            'Wrong parameters to functi

START SLAVE reports vague error when it fails to register on master:
"Wrong parameters to function register_slave".

If master failed to register slave because of too long
'report-host'/'report-user'/'report-password', return better error
messages:
"Failed to register slave: too long 'report-host'"
"Failed to register slave: too long 'report-user'"
"Failed to register slave; too long 'report-password'"

No test case for this fix.


sql/repl_failsafe.cc:
  Report descriptive error when master fails to register slave.

mysql-test/include/have_local_infile.inc:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/include/have_local_infile.inc
mysql-test/r/have_local_infile.require:
  BitKeeper file /data0/mkindahl/mysql-5.0-rpl-merge/mysql-test/r/have_local_infile.require
mysql-test/t/binlog_start_comment.test:
  Test requires that local_infile is on, so added require for that.
mysql-test/t/rpl_sp.test:
  Adding missing sync_slave_with_master causing following tests to fail.

sql/sql_repl.cc:
  Adding cast to remove compile error on Windows platform.

mysql-test/t/rpl_transaction.test:
  Test only works for debug build.

mysql-test/r/bdb_notembedded.result:
  Result change.
mysql-test/r/rpl_loaddata_map.result:
  Result change.
mysql-test/t/rpl_loaddata_map.test:
  Blanking out file id as well.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.0-rpl-merge


include/my_sys.h:
  Auto merged
mysql-test/r/blackhole.result:
  Auto merged
mysql-test/r/case.result:
  Auto merged
mysql-test/r/mysqlbinlog2.result:
  Auto merged
mysql-test/t/blackhole.test:
  Auto merged
mysql-test/t/case.test:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_acl.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug26489_corruption_in_relay_log/5.0

mysql-test/r/rpl_grant.result:
  update result

into  stella.local:/home2/mydev/mysql-5.0-axmrg

Here is the scenario that causes the failure.(by Mats)

1. The to-be corrupt log event (let's call it X), is split into two
   packets B and C on the network level (net_write_buff()). The parts
   are X = (x',x''). The part x' ends up in packet B and part x''
   ends up in packet C. Prior to the corrupt event X, the event Y has
   been written successfully, but has been split into two packets as
   well, which we call (y',y'').
2. The master sends packet A = (y'',x') to the slave, increases the
   packet sequence number, the slave receives the packet, but fails
   to reply before the master gets a timeout.
3. Since the master got a timeout, it reports failure, and aborts
   sending the binary log by exiting mysql_binlog_send(). However, it
   leaves the buffer intact, still holding y'' (but not x', since the
   write_pos is not increased).
4. After exiting mysql_binlog_send(), the master does a
   disconnection of the client thread, which involves sending an
   error message e to the client (i.e., the slave).
5. In this case, net_write_buff() is used again, but this time the
   old contents of the packet is used so that the new packet is
   D = (y'',e). Note that this will use a new packet sequence number,
   since the packet number was increased in step 2.
6. The slave receives the tail y'' of the Y log event, concatenates
   this with x' (which it already received), and writes the event
   (x',y'') it to the relay log since it hasn't noticed anything is
   amiss.
7. It then tries to read more bytes, which is either e (if the length
   given for X just happened to match the length given for Y, or just
   plain garbage because the slave is out of sync with what is
   actually sent.
8. After a while, the SQL thread tries to execute the event (x',y''),
   which is very likely to be just nonsense.

The problem can be fixed by not resetting net->error after the call of 
mysql_binlog_send, so the error message will not be sent and the connection
will be closed.


sql/sql_parse.cc:
  Do not reset net->error, if net->error == 2, we should not try to use the connection again

and so that it works correctly on Windows.


mysql-test/r/mysqlcheck.result:
  Flush tables before monkeying around with underlying MyISAM data files
mysql-test/t/mysqlcheck.test:
  Fix the test case for bug #25347 so that it actually does test the behavior.
  Also, this makes it work on Windows by ensuring that mysqld doesn't hold the
  underlying MyISAM files open while we try to corrupt them on disk.
  
  Flush tables before monkeying around with underlying MyISAM data files;
  --use-frm, so that mysqlcheck will succeed.

mysql-test/t/mysqlcheck.test:
  Use --remove_file and --write_file instead of --exec rm and --exec touch.

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/sql_select.cc:
  Auto merged

The problem is when create/rename/drop users, the statement was logged regardless of error, even if no data has been changed, the statement was logged.

After this patch, create/rename/drop users don't write the binlog if the statement makes no changes, if the statement does make any changes, log the statement with possible error code.

This patch is based on the patch for BUG#29749, which is not pushed


sql/sql_acl.cc:
  when create/rename/drop users, don't write the binlog if the statement make no changes
mysql-test/r/rpl_user.result:
  New BitKeeper file ``mysql-test/r/rpl_user.result''
mysql-test/t/rpl_user.test:
  New BitKeeper file ``mysql-test/t/rpl_user.test''

into  stella.local:/home2/mydev/mysql-5.0-axmrg

into  quad.:/mnt/raid/alik/MySQL/devel/5.0-rt-merged-5.0

into  lambda.hsd1.co.comcast.net.:/home/malff/TREE/mysql-5.0-33618


mysql-test/t/sp.test:
  Auto merged
sql/sp_head.cc:
  Auto merged
sql/sql_yacc.yy:
  Auto merged

Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)

The server used to crash when REPEAT or another control instruction
was used in conjunction with labels and a LEAVE instruction.

The crash was caused by a missing "pop" of handlers or cursors in the
code representing the stored program. When executing the code in a loop,
this missing "pop" would result in a stack overflow, corrupting memory.

Code generation has been fixed to produce the missing h_pop/c_pop
instructions.

Also, the logic checking that labels at the beginning and the end of a
statement are matched was incorrect, causing Bug 33983.
End labels, when used, must match the label used at the beginning of a block.


mysql-test/r/sp-code.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/r/sp-error.result:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/r/sp.result:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-code.test:
  Bug#33618 (Crash in sp_rcontext)
mysql-test/t/sp-error.test:
  Bug 33983 (Stored Procedures: wrong end <label> syntax is accepted)
mysql-test/t/sp.test:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_head.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.cc:
  Bug#33618 (Crash in sp_rcontext)
sql/sp_rcontext.h:
  Bug#33618 (Crash in sp_rcontext)
sql/sql_yacc.yy:
  Bug#33618 (Crash in sp_rcontext)

into  ramayana.hindu.god:/home/tsmith/m/bk/maint/50


sql/item_timefunc.cc:
  Auto merged
sql/set_var.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged