Added test cases to check the case where the option 
binlog_direct_non_transactional_updates is OFF.

BUG#46364 introduced the flag binlog_direct_non_transactional_updates which
would make N-changes to be written to the binary log upon committing the
statement when "ON". On the other hand, when "OFF" the option was supposed
to mimic the behavior in 5.1. However, the implementation was not mimicking
the behavior correctly and the following bugs popped up:

  Case #1: N-changes executed within a transaction would go into
           the S-cache. When later in the same transaction a
           T-change occurs, N-changes following it were written
           to the T-cache instead of the S-cache. In some cases,
           this raises problems. For example, a
           Table_map_log_event being written initially into the
           S-cache, together with the initial N-changes, would be
           absent from the T-cache. This would log N-changes
           orphaned from a Table_map_log_event (thence discarded
           at the slave). (MIXED and ROW)

   Case #2: When rolling back a transaction, the N-changes that
            might be in the T-cache were disregarded and
            truncated along with the T-changes. (MIXED and ROW)

   Case #3: When a MIXED statement (TN) is ahead of any other
            T-changes in the transaction and it fails, it is kept
            in the T-cache until the transaction ends. This is
            not the case in 5.1 or Betony (5.5.2). In these, the
            failed TN statement would be written to the binlog at
            the same instant it had failed and not deferred until
            transaction end. (SBR)

To fix these problems, we have decided to do what follows:

   For Case #1 and #2, we circumvent them:

      1. by not letting binlog_direct_non_transactional_updates
         affect MIXED and RBR. These modes will keep the behavior
         provided by WL#2687. Although this will make Celosia to
         behave differently from 5.1, an execution will be always
         safe under such modes in the sense that slaves will never
         go out sync. In 5.1, using either MIXED or ROW while
         mixing N-statements and T-statements was not safe.

   For Case #3, we don't actually fix it. We:

      1. keep it and make all MIXED statements whether they end
         up failing or not or whether they are up front in the
         transaction or after some transactional change to always
         be stored in the T-cache. This means that it is written
         to the binary log on transaction commit/rollback only.

      2. We make the warning message even more specific about the
         MIXED statement and SBR.

experimental due to Bug 52202.

in optimized build) 
Unlike in autotools build, innodb was compiled with 
-DUNIV_MUST_NOT_INLINE set.  this exposed what
seems to be a bug in gcc backend.

The fix is to remove extra definition.

- package some more perl scripts on Windows (mysqlhotcopy and mysqldumpslow)
- do not try to pack .map files (no more produced)
- (CMake-unrelated) fix debug build on FreeBSD, trying to use uninitialized attribute
MY_MUTEX_INIT_FAST

 
All numeric operators and functions on integer, floating point 
and DECIMAL values now throw an 'out of range' error rather 
than returning an incorrect value or NULL,  when the result is 
out of supported range for the corresponding data type. 
 
Some test cases in the test suite had to be updated 
accordingly either because the test case itself relied on a 
value returned in case of a numeric overflow, or because a 
numeric overflow was the root cause of the corresponding bugs. 
The latter tests are no longer relevant, since the expressions 
used to trigger the corresponding bugs are not valid anymore. 
However, such test cases have been adjusted and kept "for the 
record". 

Corrected some packaging bugs:
- install mysqlservices library
- install libmysqlclient_r.so.{16,16.0.0} as links
  to libmysqlclient.so
- install libmysqld-debug.a
- install my_safe_process, my_safe_kill and
  symlinks to mysql-test-run.pl (mtr, mysql-test-run)
  into correct place ${INSTALL_MYSQLTESTDIR}

In BUG#49562 we fixed the case where numeric user var events
would not serialize the flag stating whether the value was signed
or unsigned (unsigned_flag). This fixed the case that the slave
would get an overflow while treating the unsigned values as
signed.
      
In this bug, we find that the unsigned_flag can sometimes change
between the moment that the user value is recorded for binlogging
purposes and the actual binlogging time. Since we take the
unsigned_flag from the runtime variable data, at binlogging time,
and the variable value is comes from the copy taken earlier in
the execution, there may be inconsistency in the
User_var_log_event between the variable value and its
unsigned_flag.
      
We fix this by also copying the unsigned_flag of the
user_var_entry when its value is copied, for binlogging
purposes. Later, at binlogging time, we use the copied
unsigned_flag and not the one in the runtime user_var_entry
instance.

Non-determinism of the test was caused by lack of setting a proper value to hb period,
actually fixed by BUG@50767.

These fixes aim at possible non-determinism in comparison of received
hb events by master and slave in the circular part of the test.
Even though the HB periods ratio was choosen to be as high as 10, it's still incorrect 
to compare number of hb-events basing only a relation between their periods.

Yet another issue is relatively short 60 secs timeout of wait_for_status_var.inc
makes valgrind runs to fail. 
Fixed with deploying wait_for_slave_io_to_start afront of calling wait_for_status_var.

The test is made runnable only with MIXED binlog-format as it has close to 1 min
total exec time and there is nothing format specific in it.

DDL no longer aborts mysql_lock_tables(), and hence
we no longer need to support need_reopen flag of this
call. 
Remove the flag, and all the code in the server
that was responsible for handling the case when
it was set. This allowed to simplify: 
open_and_lock_tables_derived(), the delayed thread,
multi-update.

Rename MYSQL_LOCK_IGNORE_FLUSH to MYSQL_OPEN_IGNORE_FLUSH,
since we now only support this flag in open_table().

Rename MYSQL_LOCK_PERF_SCHEMA to MYSQL_LOCK_LOG_TABLE,
to avoid confusion.

Move the wait for the global read lock for cases
when we do updates in SELECT f1() or DO (UPDATE) to 
open_table() from mysql_lock_tables(). When waiting
for the read lock, we could raise need_reopen flag,
which is no longer present in mysql_lock_tables().
Since the block responsible for waiting for GRL
was moved, MYSQL_LOCK_IGNORE_GLOBAL_READ_LOCK
was renamed to MYSQL_OPEN_IGNORE_GLOBAL_READ_LOCK.

Use new command line options instead of deprecated and removed ones.

This deadlock could occour betweeen one connection executing
SET GLOBAL EVENT_SCHEDULER= ON and another executing SET GLOBAL
EVENT_SCHEDULER= OFF. The bug was introduced by WL#4738.

The first connection would hold LOCK_event_metadata (protecting
the global variable) while trying to lock LOCK_global_system_variables
starting the event scheduler thread (in THD:init()).

The second connection would hold LOCK_global_system_variables
while trying to get LOCK_event_scheduler after stopping the event
scheduler inside event_scheduler_update().

This patch fixes the problem by not using LOCK_event_metadata to
protect the event_scheduler variable. It is still protected using
LOCK_global_system_variables. This fixes the deadlock as it removes 
one of the two mutexes used to produce it.

However, this patch opens up the possibility that the event_scheduler
variable and the real event_scheduler state can become out of sync
(e.g. variable = OFF, but scheduler running). But this can only
happen under very unlikely conditions - two concurrent SET GLOBAL
statments, with one thread interrupted at the exact wrong moment.
This is preferable to having the possibility of a deadlock.

This patch also fixes a bug where it was possible to exit create_event()
without releasing LOCK_event_metadata if running out of memory during
its exection.

No test case added since a repeatable test case would have required
excessive use of new sync points. Instead we rely on the fact that
this bug was easily reproduceable using RGQ tests.

When building the script directory using a CMake-based build, both the
variables in config.h.cmake (including PLUGINDIR) and the variables in
CMakeList.txt (which includes pkgplugindir).

However, for autotools-based builds, only pkgplugindir is substituted,
which means that the plugin-path is not substituted.

This patch solves the problem by using pkgplugindir, which works on both
CMake-based and autotools-based builds, instead of PLUGINDIR.

Remove unnecessary need_reopen loops.