can be interpreted as a shell metacharacter in some circumstances.
For example, it is interpreted as a command separator when invoking
a debugger.

mysql-test/lib/mtr_cases.pm:
  Use ':' as the separator on non-Windows platforms.
mysql-test/mysql-test-run.pl:
  Remove unnecessary use of the separator.

The problem was that appending values to the end of an existing
ENUM or SET column was being treated as table data modification,
preventing a immediately (fast) table alteration that occurs when
only table metadata is being modified.

The cause was twofold: adding a enumeration or set members to the 
end of the list of valid member values was not being considered
a "compatible" table alteration, and for SET columns, the check
was being done upon the max display length and not the underlying
(pack) length of the field.

The solution is to augment the function that checks wether two ENUM
or SET fields are compatible -- by comparing the pack lengths and
performing a limited comparison of the member values.

mysql-test/r/alter_table.result:
  Add test case result for Bug#45567
mysql-test/t/alter_table.test:
  Add test case for Bug#45567
sql/field.cc:
  Check whether two fields can be considered 'equal' for table
  alteration purposes. Fields are equal if they retain the same
  pack length and if new members are added to the end of the list.
sql/field.h:
  Add comment and remove method.

The bug is not related to MERGE table or TRIGGER. More correct description
would be 'assertion on multi-table UPDATE + NATURAL JOIN + MERGEABLE VIEW'.
On PREPARE stage(see test case) we call mark_common_columns() func which
creates ON condition for NATURAL JOIN and sets appropriate
table read_set bitmaps for fields which are used in ON condition.
On EXECUTE stage mark_common_columns() is not called, we set
necessary read_set bitmaps in setup_conds(). But 'B.f1' field
is already processed and related item alredy fixed before
setup_conds() as updated field and setup_conds can not set
read_set bitmap because of that.
The fix is to set read_set bitmap for appropriate table field even
if Item_direct_view_ref item which represents a refernce to this field
is fixed.



mysql-test/r/join.result:
  test result
mysql-test/t/join.test:
  test case
sql/item.cc:
  The bug is not related to MERGE table or TRIGGER. More correct description
  would be 'assertion on multi-table UPDATE + NATURAL JOIN + MERGEABLE VIEW'.
  On PREPARE stage(see test case) we call mark_common_columns() func which
  creates ON condition for NATURAL JOIN and sets appropriate
  table read_set bitmaps for fields which are used in ON condition.
  On EXECUTE stage mark_common_columns() is not called, we set
  necessary read_set bitmaps in setup_conds(). But 'B.f1' field
  is already processed and related item alredy fixed before
  setup_conds() as updated field and setup_conds can not set
  read_set bitmap because of that.
  The fix is to set read_set bitmap for appropriate table field even
  if Item_direct_view_ref item which represents a refernce to this field
  is fixed.

Add --help option.

by Svoj over e-mail.

"load data" statements were written to the binlog as a mix of the original statement
and bits recreated from parse-info. This relied on implementation details and broke
with IGNORE_SPACES and versioned comments.

We now completely resynthesize the query for LOAD DATA for binlog (which among other
things normalizes them somewhat with regard to case, spaces, etc.).
We have already parsed the query properly, so we make use of that rather
than mix-and-match string literals and parsed items.
This should make us safe with regard to versioned comments, even those
spanning multiple tokens. Also no longer affected by IGNORE_SPACES.

mysql-test/r/mysqlbinlog.result:
  LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_killed_simulate.result:
  LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result:
  LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
  LOAD DATA INFILE normalized
mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result:
  LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_innodb_mixed_dml.result:
  LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata.result:
  LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddata_fatal.result:
  LOAD DATA INFILE normalized; offsets adjusted to reflect that
mysql-test/suite/rpl/r/rpl_loaddata_map.result:
  LOAD DATA INFILE normalized
mysql-test/suite/rpl/r/rpl_loaddatalocal.result:
  test for #43746 - trying to break LOAD DATA part of parser
mysql-test/suite/rpl/r/rpl_stm_log.result:
  LOAD DATA INFILE normalized
mysql-test/suite/rpl/t/rpl_loaddatalocal.test:
  try to break the LOAD DATA part of the parser (test for #43746)
mysql-test/t/mysqlbinlog.test:
  LOAD DATA INFILE normalized; adjust offsets to reflect that
sql/log_event.cc:
  clean up Load_log_event::print_query and friends so they don't print
  excess spaces. add support for printing charset names to print_query.
sql/log_event.h:
  We already have three places where we synthesize LOAD DATA queries.
  Better use one of those!
sql/sql_lex.h:
  When binlogging LOAD DATA statements, we make up the statement to
  be logged (from the parse-info, rather than substrings of the
  original query) now. Consequently, we no longer need (string-)
  pointers into the original query.
sql/sql_load.cc:
  Completely rewrote write_execute_load_query_log_event() to synthesize the
  LOAD DATA statement wholesale, rather than piece it together from
  synthesized bits and literal excerpts from the original query. This
  will not only give us a nice, normalized statement (all uppercase,
  no excess spaces, etc.), it will also handle comments, including
  versioned comments right, which is certainly more than we can say
  about the previous incarnation.
sql/sql_yacc.yy:
  We're no longer assembling LOAD DATA statements from bodyparts of the
  original query, so some bookkeeping in the parser can go.

Bug#46958: Assertion in Diagnostics_area::set_ok_status, 
trigger, merge table
            
The problem with break statements is that they have very
local effects. Hence a break statement within the inner loop
of a nested-loops join caused execution to proceed to the
next table even though a serious error occurred. The problem
was fixed by breaking out the inner loop into its own
method. The change empowers all errors to terminate the
execution.
            
The errors that will now halt multi-DELETE execution
altogether are 
  - triggers returning errors
  - handler errors
  - server being killed


mysql-test/r/delete.result:
  Bug#46958: Test result.
mysql-test/t/delete.test:
  Bug#46958: Test case.
sql/sql_class.h:
  Bug#46958: New method declaration.
sql/sql_delete.cc:
  Bug#46958: New method implementation.

All statements executed by mysql_upgrade are binlogged and then are replicated to slave.
This will result in some errors. The report of this bug has demonstrated some examples.

Master and slave should be upgraded separately. All statements executed by
mysql_upgrade will not be binlogged. 
--write-binlog and --skip-write-binlog options are added into mysql_upgrade. 
These options control whether sql statements are binlogged or not. 

      
In RBR, 'DROP TEMPORARY TABLE IF EXISTS...' statement is binlogged when the table
does not exist.
      
In fact, 'DROP TEMPORARY TABLE ...' statement should never be binlogged in RBR
no matter if the table exists or not. 
This patch addresses this by checking whether we are dropping a
temporary table or not, when building the custom drop statement.

HA_ERR_WRONG_INDEX
      
In RBR, disabling keys on slave table will break replication when
updating or deleting a record. When the slave thread tries to
find the row, by searching in the storage engine, it checks
whether the table has a key or not. If it has one, then the slave
thread uses it to search the record.
      
Nonetheless, the slave only checks whether the key exists or not,
it does not verify if it is active. Should the key be
disabled (eg, DBA has issued an ALTER TABLE ... DISABLE KEYS)
then it will result in error: HA_ERR_WRONG_INDEX.
      
This patch addresses this issue by making the slave thread also
check whether the key is active or not before actually using it.

The failure is not reproduced on 5.1, so enable the 'rpl_cross_version' test.

mysql-test/suite/rpl/t/disabled.def:
  Got rid of the line for enabling 'rpl_cross_version' test.

Network error happened here, but it can be caused by CR_CONNECTION_ERROR, 
CR_CONN_HOST_ERROR, CR_SERVER_GONE_ERROR, CR_SERVER_LOST, ER_CON_COUNT_ERROR, 
and ER_SERVER_SHUTDOWN. We just check CR_SERVER_LOST here, so the test fails.

To fix the problem, check all errors that can be cause by the master shutdown.

mysql-test/extra/rpl_tests/rpl_get_master_version_and_clock.test:
  Added a 'if' sentence to check all errors that can be cause by the master shutdown.
mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result:
  Test result is updated duo to the patch of bug#46931

from test-extra tree.

Changes include improvements to error handling and are based on WL#4685

Invalid (old?) table or database name in logs

Problem was still not completely fixed, due to
qouting.

This is the server side only fix (in explain_filename),
the change from filename_to_tablename to use explain_filename
in the InnoDB code must be done before the bug is
fixed.


mysql-test/include/have_not_innodb_plugin.inc:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  Added include file to allow test for only the
  'old' built-in innodb engine
mysql-test/r/not_true.require:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  Added require to match 'not' TRUE
mysql-test/r/partition_innodb_builtin.result:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  New result file for partitioning specific to
  the 'old' built-in innodb engine
mysql-test/r/partition_innodb_plugin.result:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  New result file for partitioning specific to
  the new plugin innodb engine
mysql-test/t/disabled.def:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  Disabling the new test until the fix is
  included in the InnoDB source too.
mysql-test/t/partition_innodb_builtin.test:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  New test file for partitioning specific to
  the 'old' built-in innodb engine
mysql-test/t/partition_innodb_plugin.test:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  New test file for partitioning specific to
  the new plugin innodb engine
sql/mysql_priv.h:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  Added thd as a parameter to explain_filename
  to be able to use the correct quote character
sql/sql_table.cc:
  Bug#32430: 'show innodb status' causes errors
  Invalid (old?) table or database name in logs
  
  Changed explain_filename, so that it does qouting
  correctly according to the sessions qoute char.

 - Create the "dummy" thread joinable and wait for it to
   exit before continuing in 'my_thread_global_init'
 - This way we know that the pthread library is initialized
   by one thread only

with gcc 4.3.2

Cleaning up warnings not present in 5.0.

when compiled with Sun Studio compiler).

The thing is that Sun Studio compiler calls destructor of stack
objects when pthread_exit() is called. That triggered an assertion
in DBUG_ENTER()/DBUG_RETURN() validation logic (if DBUG_ENTER() is
used in the beginning of function, all returns should be replaced
by DBUG_RETURN/DBUG_VOID_RETURN macros).

A fix is to explicitly use DBUG_LEAVE macro.

                               value from the index (PRIMARY)


With the fix for BUG#46760, we correctly flag the presence of row_type 
only when it's actually changed and enables the FAST ALTER TABLE which was
disabled with the BUG#39200.

So the changes made by BUG#46760 makes MySQL data dictionaries to be out of 
sync but they are handled already by InnoDB with this BUG#44030.

The test was originally written to handle this but we requested Innodb to
update the test as the data dictionaries were in sync after the fix for 
BUG#39200.

Adjusting the innodb-autoinc testcase as mentioned in the comments.

mysql-test/lib/mtr_cases.pm:
  Re-enable the innodb-autoinc test case for plugin as we have a common
  result file.
mysql-test/r/innodb-autoinc.result:
  Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc 
                                 value from the index (PRIMARY)
  
  Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the 
  FAST ALTER TABLE and makes the data dictonaries go out of sync. This is 
  expected in the testcase.
mysql-test/t/innodb-autoinc.test:
  Additional Fix for BUG#44030 - Error: (1500) Couldn't read the MAX(ID) autoinc 
                                 value from the index (PRIMARY)
  
  Adjust the innodb-autoinc testcase as the patch for BUG#46760 enables the 
  FAST ALTER TABLE and makes the data dictonaries go out of sync. This is 
  expected in the testcase.

the fix is reverted from 5.1, mysql-pe as 
unnecessary(no valgrind warnings there).

sql/sql_select.cc:
  the fix is reverted from 5.1, mysql-pe as 
  unnecessary(no valgrind warnings there).