fil_space_verify_crypt_checksum(): Compute the bug-compatible variant
of the CRC-32C checksum if the correct one does not match.

fil_space_verify_crypt_checksum(): Add a dummy return statement
in case memory is corrupted and innodb_checksum_algorithm has
an invalid value.

The initial fix only covered a part of Mariabackup.
This fix hardens InnoDB and XtraDB in a similar way, in order
to reduce the probability of mistaking a corrupted encrypted page
for a valid unencrypted one.

This is based on work by Thirunarayanan Balathandayuthapani.

fil_space_verify_crypt_checksum(): Assert that key_version!=0.
Let the callers guarantee that. Now that we have this assertion,
we also know that buf_page_is_zeroes() cannot hold.
Also, remove all diagnostic output and related parameters,
and let the relevant callers emit such messages.
Last but not least, validate the post-encryption checksum
according to the innodb_checksum_algorithm (only accepting
one checksum for the strict variants), and no longer
try to validate the page as if it was unencrypted.

buf_page_is_zeroes(): Move to the compilation unit of the only callers,
and declare static.

xb_fil_cur_read(), buf_page_check_corrupt(): Add a condition before
calling fil_space_verify_crypt_checksum(). This is a non-functional
change.

buf_dblwr_process(): Validate the page only as encrypted or unencrypted,
but not both.

MDEV-17848: Galera test failure on galera_sst_xtrabackup-v2[_data_dir]

A static analysis tool suggested that in the function
row_merge_read_clustered_index(), ut_free(nonnull) could
be invoked twice for nonnull!=NULL. While a manual review
of the code disproved this, it should not hurt to clean up
the code so that the static analysis tool will not complain.

index_tuple_info_t::insert(), row_mtuple_cmp(): Remove the
parameter mtr_committed, which duplicated !mtr->is_active().

row_merge_read_clustered_index(): Initialize row_heap = NULL.
Remove a duplicated call mem_heap_empty(row_heap) that was
inadvertently added in commit cb1e76e4.

Replace a "goto func_exit" with "break", to get consistent error
handling for both failures to create or write a temporary file.

end_of_index: Assign row_heap=NULL and nonnull=NULL to prevent
double freeing.

func_exit: Check for row_heap!=NULL before invoking mem_heap_free().

Closes #959

Remove provider defaults check from 'galera_defaults' MTR test

Problem is that if you use bundled yassl AES_CTR is not supported. There is a way to detect that but as we really want to keep this test enabled did not add
skip for missing support. Changed method to AES_CBC as there is no need to
use AES_CTR.

Add check that file key management plugin is found.

While calculating distinct with the function remove_dup_with_compare, we don't have rnd_end calls
when we have completed the scan over the temporary table.
Added ha_rnd_end calls when we are done with the scan of the table.

galera_prepared_statement test fixed.

connect.xml2 test result fixed.

The error message modified.
Then the TABLE_SHARE::error_table_name() implementation taken from 10.3,
          to be used as a name of the table in this message.

ported privilege checking from xtrabackup.
Now, mariabackup would terminate early if either RELOAD or PROCESS privilege
is not held, not at the very end of backup

The behavior can be disabled with nre setting --check-privileges=0.
Also , --no-lock does not need all of these privileges, since it skips
FTWRL and SHOW ENGINE STATUS INNODB.

From time to time Galera adds new parameters or changes defaults to
existing ones. Every time this happens galera_defaults test needs a
fix (and a commit) because it insists on checking these defaults.
This is making life hard because any Galera update may require a fix
to MariaDB code even though it is totally unrelated and defeats the
whole idea of a provider living its own life.
This commit removes checking for provider defaults to avoid false
positive failures on MariaDB side.

Internal transactions may not have trx->mysql_thd.
But at the same time, trx->duplicates should only hold if
REPLACE or INSERT...ON DUPLICATE KEY UPDATE was executed from SQL.

The flag feels misplaced. A more appropriate place for it would
be row_prebuilt_t or similar.

After validating the post-encryption checksum on an encrypted page,
Mariabackup should decrypt the page and validate the pre-encryption
checksum as well. This should reduce the probability of accepting
invalid pages as valid ones.

This is a backport and refactoring of a patch that was
originally written by Thirunarayanan Balathandayuthapani
for the 10.2 branch.

Innochecksum was being built as if WITH_INNODB_BUG_ENDIAN_CRC32:BOOL=OFF
had been specified.

Also, clean up tests:

innodb.innochecksum: Useless; superceded by innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum: Remove; duplicated innodb_zip.innochecksum.
innodb.innodb_zip_innochecksum2: Remove; duplicated innodb_zip.innochecksum_2.
innodb.innodb_zip_innochecksum3: Remove; duplicated innodb_zip.innochecksum_3.

No test case was added. I tested manually by adding debug instrumentation
to both innochecksum and buf_page_is_checksum_valid_crc32() to make
innochecksum write the buggy crc32, and to get warnings for falling back
to the buggy checksum. Automating this would require that tests be
adjusted depending on the build options.

Allow array binding for DELETE, test it.

With innodb_default_row_format=redundant, InnoDB would crash when
using table options that are incompatible with ROW_FORMAT=REDUNDANT.

create_table_info_t::m_default_row_format: Cache the value of
innodb_default_row_format.

create_table_info_t::check_table_options(): Validate ROW_TYPE_DEFAULT
with m_default_row_format.

create_table_info_t::innobase_table_flags(): Use the
cached m_default_row_format.

create_table_info_t: Never read m_form->s->row_type.
Use m_create_info->row_type instead.

dict_tf_set(): Never set invalid flags for ROW_FORMAT=REDUNDANT.

ha_innobase::truncate(): Set info.row_type based on the ROW_FORMAT
of the current table.

In MySQL 5.7, it was noticed that files are not portable between
big-endian and little-endian processor architectures
(such as SPARC and x86), because the original implementation of
innodb_checksum_algorithm=crc32 was not byte order agnostic.

A byte order agnostic implementation of innodb_checksum_algorithm=crc32
was only added to MySQL 5.7, not backported to 5.6. Consequently,
MariaDB Server versions 10.0 and 10.1 only contain the CRC-32C
implementation that works incorrectly on big-endian architectures,
and MariaDB Server 10.2.2 got the byte-order agnostic CRC-32C
implementation from MySQL 5.7.

MySQL 5.7 introduced a "legacy crc32" variant that is functionally
equivalent to the big-endian version of the original crc32 implementation.
Thanks to this variant, old data files can be transferred from big-endian
systems to newer versions.

Introducing new variants of checksum algorithms (without introducing
new names for them, or something on the pages themselves to identify
the algorithm) generally is a bad idea, because each checksum algorithm
is like a lottery ticket. The more algorithms you try, the more likely
it will be for the checksum to match on a corrupted page.

So, essentially MySQL 5.7 weakened innodb_checksum_algorithm=crc32,
and MariaDB 10.2.2 inherited this weakening.

We introduce a build option that together with MDEV-17957
makes innodb_checksum_algorithm=strict_crc32 strict again
by only allowing one variant of the checksum to match.

WITH_INNODB_BUG_ENDIAN_CRC32: A new cmake option for enabling the
bug-compatible "legacy crc32" checksum. This is only enabled on
big-endian systems by default, to facilitate an upgrade from
MariaDB 10.0 or 10.1. Checked by #ifdef INNODB_BUG_ENDIAN_CRC32.

ut_crc32_byte_by_byte: Remove (unused function).

legacy_big_endian_checksum: Remove. This variable seems to have
unnecessarily complicated the logic. When the weakening is enabled,
we must always fall back to the buggy checksum.

buf_page_check_crc32(): A helper function to compute one or
two CRC-32C variants.

Also, apply the MDEV-17957 changes to encrypted page checksums,
and remove error message output from the checksum function,
because these messages would be useless noise when mariabackup
is retrying reads of corrupted-looking pages, and not that
useful during normal server operation either.

The error messages in fil_space_verify_crypt_checksum()
should be refactored separately.

This is a backport of a part of
commit 18455ec3
from 10.1.

Problem:

  Innodb_checksum_algorithm checks for all checksum algorithm to
validate the page checksum even though the algorithm is specified as
strict_crc32, strict_innodb, strict_none.

Fix:

   Remove the checks for all checksum algorithm to validate the page
checksum if the algo is specified as strict_* values.

1. don't run full mysql_upgrade on every server restart,
   use --version-check to do it only once

2. fix syslog tag name in the postinst script, don't pretend
   mysqld_safe generated all these messages. Auto-detect the version
   to simplify maintenance

ha_innobase::truncate(): Because CREATE TEMPORARY TABLE
allows invalid table options when innodb_file_per_table=1,
do allow them also in TRUNCATE for temporary tables.

The mariabackup SST script was incorrectly processes
innodb_data_home_dir parameter if it is specified in
the configuration file for one of the cluster nodes.
Therefore, a corresponding revision of the mariabackup
SST script was made, which provides reading of the
corresponding parameter from the configuration file
or from the command line.

https://jira.mariadb.org/browse/MDEV-17848